arXiv subjects

S. Bhattacharya

Publications and source records attributed to S. Bhattacharya.

At least 109 records · Page 6Linked to original sources

arXiv2022

The halo of M105 and its group environment as traced by planetary nebula populations: II. Using kinematics of single stars to unveil the presence of intragroup light around the Leo I galaxies NGC 3384 and M105

M105 is an early-type galaxy in the nearby Leo I group, the closest galaxy group to contain all galaxy types and therefore an excellent environment to explore the low-mass end of intra-group light (IGL) assembly. We present a new extended kinematic survey of planetary nebulae (PNe) in M105 and the surrounding 30'x30' in the Leo I group with the Planetary Nebula Spectrograph. We use PNe as kinematic tracers of the diffuse stellar light in the halo and IGL and employ Gaussian mixture models to separate contributions from the companion galaxy NGC 3384 and associate PNe with halo and IGL components around M105. We present a catalogue of 314 PNe and firmly associate 93 with NGC 3384 and 169 with M105. The PNe in M105 are further associated with its halo and the surrounding exponential envelope. We construct smooth velocity and velocity dispersion fields and calculate projected rotation, velocity dispersion, and $λ_R$ profiles for each component. Halo PNe exhibit declining velocity dispersion and rotation profiles, while the velocity dispersion and rotation of the exponential envelope increase notably at large radii. We identify three regimes with distinct kinematics that are linked to distinct stellar population properties: (i) the rotating core (within $1~R_\mathrm{eff}$) formed in situ and dominated by metal-rich ([M/H]~0) stars likely formed in situ, (ii) the halo from 1 to $7.5~R_\mathrm{eff}$ consisting of intermediate-metallicity stars ([M/H]>-1), either formed in situ or brought in through major mergers, and (iii) the exponential envelope reaching beyond our farthest data point at 16 $R_\mathrm{eff}$, predominately composed of metal-poor ([M/H]<-1) stars. The high velocity dispersion and moderate rotation of the latter are consistent with that measured for dwarf satellite galaxies in the Leo I group, indicating that the exponential envelope traces the transition to the IGL.

astro-ph.GA↗

arXiv2021

The case for a U(1)$_π$ Quantum Spin Liquid Ground State in the Dipole-Octupole Pyrochlore Ce$_2$Zr$_2$O$_7$

The Ce$^{3+}$ pseudospin-$\frac{1}{2}$ degrees of freedom in the pyrochlore magnet Ce$_2$Zr$_2$O$_7$ are known to possess dipole-octupole (DO) character, making it a candidate for novel quantum spin liquid (QSL) ground states at low temperatures. We report new polarized neutron diffraction at low temperatures, as well as heat capacity ($C_p$) measurements on single crystal Ce$_2$Zr$_2$O$_7$. The former bears both similarities and differences from that measured in the canonical dipolar spin ice compound Ho$_2$Ti$_2$O$_7$, while the latter rises sharply at low temperatures, initially plateauing near 0.08 K, before falling off towards a high temperature zero beyond 3 K. Above $\sim$0.5 K, the $C_p$ data set can be fit to the results of a quantum numerical linked cluster (NLC) calculation, carried out to 4$^{\mathrm{th}}$ order, that allows estimates for the terms in the near-neighbour XYZ Hamiltonian expected for such DO pyrochlore systems. Fits of the same theory to the temperature dependence of the magnetic susceptibility and unpolarized neutron scattering complement this analysis. A comparison between the resulting best fit NLC calculation and the polarized neutron diffraction shows both agreement and discrepancies, mostly in the form of zone-boundary diffuse scattering in the non-spin flip channel, which are attributed to interactions beyond near-neighbours. The lack of an observed thermodynamic anomaly and the constraints on the near-neighbour XYZ Hamiltonian suggest that Ce$_2$Zr$_2$O$_7$ realizes a U(1)$_π$ QSL state at low temperatures, and one that likely resides near the boundary between dipolar and octupolar character.

cond-mat.str-el↗

arXiv2021

Science Requirements and Detector Concepts for the Electron-Ion Collider: EIC Yellow Report

This report describes the physics case, the resulting detector requirements, and the evolving detector concepts for the experimental program at the Electron-Ion Collider (EIC). The EIC will be a powerful new high-luminosity facility in the United States with the capability to collide high-energy electron beams with high-energy proton and ion beams, providing access to those regions in the nucleon and nuclei where their structure is dominated by gluons. Moreover, polarized beams in the EIC will give unprecedented access to the spatial and spin structure of the proton, neutron, and light ions. The studies leading to this document were commissioned and organized by the EIC User Group with the objective of advancing the state and detail of the physics program and developing detector concepts that meet the emerging requirements in preparation for the realization of the EIC. The effort aims to provide the basis for further development of concepts for experimental equipment best suited for the science needs, including the importance of two complementary detectors and interaction regions. This report consists of three volumes. Volume I is an executive summary of our findings and developed concepts. In Volume II we describe studies of a wide range of physics measurements and the emerging requirements on detector acceptance and performance. Volume III discusses general-purpose detector concepts and the underlying technologies to meet the physics requirements. These considerations will form the basis for a world-class experimental program that aims to increase our understanding of the fundamental structure of all visible matter

physics.ins-det↗

arXiv2021

Thermal evolution of nanocrystalline co-sputtered Ni-Zr alloy films: Structural, magnetic and MD simulation studies

Monophasic and homogeneous Ni10Zr7 nanocrystalline alloy films were successfully grown at room temperature by co-sputtering in an indigenously developed three-gun DC/RF magnetron sputtering unit. The films could be produced with long-range crystallographic and chemical order in the alloy, thus overcoming the widely acknowledged inherent proclivity of the glass forming Ni-Zr couple towards amorphization. Crystallinity of these alloys is a desirable feature with regard to improved efficacy in applications such as hydrogen storage, catalytic activity and nuclear reactor engineering, to name a few. Thermal stability of this crystalline phase, being vital for transition to viable applications, was investigated through systematic annealing of the alloy films at 473 K, 673 K and 923 K for various durations. While the films were stable at 473 K, the effect of annealing at 673 K was to create segregation into nanocrystalline Ni (superparamagnetic) and amorphous Ni+Zr (non-magnetic) phases. Detailed analyses of the physical and magnetic structures before and after annealing were performed through several techniques effectual in analyzing stratified configurations and the findings were all consistent with each other. Polarized neutron and X-ray reflectometry, grazing incidence x-ray diffraction, time-of-flight secondary ion mass spectroscopy and X-ray photoelectron spectroscopy were used to gauge phase separation at nanometer length scales. SQUID based magnetometry was used to investigate macroscopic magnetic properties. Simulated annealing performed on this system using molecular dynamic calculations corroborated well with the experimental results. This study provides a thorough understanding of the creation and thermal evolution of a crystalline Ni-Zr alloy.

cond-mat.mtrl-sci↗

arXiv2020

Construction and commissioning of CMS CE prototype silicon modules

As part of its HL-LHC upgrade program, the CMS Collaboration is developing a High Granularity Calorimeter (CE) to replace the existing endcap calorimeters. The CE is a sampling calorimeter with unprecedented transverse and longitudinal readout for both electromagnetic (CE-E) and hadronic (CE-H) compartments. The calorimeter will be built with $\sim$30,000 hexagonal silicon modules. Prototype modules have been constructed with 6-inch hexagonal silicon sensors with cell areas of 1.1~$cm^2$, and the SKIROC2-CMS readout ASIC. Beam tests of different sampling configurations were conducted with the prototype modules at DESY and CERN in 2017 and 2018. This paper describes the construction and commissioning of the CE calorimeter prototype, the silicon modules used in the construction, their basic performance, and the methods used for their calibration.

physics.ins-det↗

arXiv2020

The DAQ system of the 12,000 Channel CMS High Granularity Calorimeter Prototype

The CMS experiment at the CERN LHC will be upgraded to accommodate the 5-fold increase in the instantaneous luminosity expected at the High-Luminosity LHC (HL-LHC). Concomitant with this increase will be an increase in the number of interactions in each bunch crossing and a significant increase in the total ionising dose and fluence. One part of this upgrade is the replacement of the current endcap calorimeters with a high granularity sampling calorimeter equipped with silicon sensors, designed to manage the high collision rates. As part of the development of this calorimeter, a series of beam tests have been conducted with different sampling configurations using prototype segmented silicon detectors. In the most recent of these tests, conducted in late 2018 at the CERN SPS, the performance of a prototype calorimeter equipped with ${\approx}12,000\rm{~channels}$ of silicon sensors was studied with beams of high-energy electrons, pions and muons. This paper describes the custom-built scalable data acquisition system that was built with readily available FPGA mezzanines and low-cost Raspberry PI computers.

physics.ins-det↗

arXiv2020

Detailed investigation on the possibility of using EJ-299-33A plastic scintillator for fast neutron spectroscopy in large scale experiments

Detailed characterization of the newly available plastic scintillator (EJ-299-33A) having the pulse shape discrimination (PSD) property has been carried out in case of a large-sized detector (5 in.$\times$5 in.). The pulse height response of the scintillator for nearly mono-energetic neutrons has been reported in case of neutron energies E$_n$ =3, 6 and 9 MeV. Important properties (figure-of-merit (FOM), time resolution, detection efficiency) of the detector has been compared with a commonly used liquid organic scintillator based detector of the same size coupled to the same PMT for uniformity in comparison. The results show that the plastic scintillator detector has about 12$\%$ better time resolution. However, the FOM and detection efficiency were found to be lower than that of the liquid scintillator detector by 40 - 50$\%$ and $\sim $25$\%$, respectively. The possibility of using the new plastic scintillator in large-scale nuclear physics experiments has been pointed out.

physics.ins-det↗

arXiv2019

Spectroscopy of $^{196}$Hg using Digital INGA at VECC, Kolkata

Spectroscopic investigation of the $^{196}$Hg (Z=80, N=116) was carried out using the Indian National Gamma Array (INGA) setup at the Variable Energy Cyclotron Centre (VECC), Kolkata. Analysis of the acquired data led to the identification of new $γ$-ray transitions and levels in the excitation pattern of the nucleus along with the spin-parity assignments thereof. The latter were either previously absent or had been tentatively identified. Theoretical interpretation of the level structure obtained from these efforts can be pursued with appropriate model calculations.

nucl-ex↗

arXiv2019

Effects of one valence proton on seniority and angular momentum of neutrons in neutron-rich $^{122-131}$Sb$_{51}$ isotopes

The neutron-rich $^{122-131}$Sb isotopes were produced as fission fragments in the reaction $^{9}$Be($^{238}$U,~f) with 6.2 MeV/u beam energy. An unique setup, consisting of AGATA, VAMOS++ and EXOGAM detectors, was used which enabled the prompt-delayed gamma-ray ($γ$) spectroscopy of fission fragments in the time range of 100 ns - 200 $μ$s. New isomers, prompt and delayed transitions were established in the even-A $^{122-130}$Sb isotopes. In the odd-A $^{123-131}$Sb isotopes, new prompt and delayed $γ$-ray transitions were identified, in addition to the confirmation of the previously known isomers. The half-lives of the isomeric states and the $B(E2)$ transition probabilities of the observed transitions depopulating these isomers were extracted. The experimental data was compared with the theoretical results obtained in the framework of Large-Scale Shell-Model (LSSM) calculations in a restricted model space. Modifications of several components of the shell model interaction were introduced to obtain a consistent agreement with the excitation energies and the $B(E2)$ transition probabilities in neutron-rich Sn and Sb isotopes. The isomeric configurations in Sn and Sb were found to be relatively pure. Further, the calculations revealed that the presence of a single valence proton, mainly in the $g_{7/2}$ orbital in Sb isotopes, leads to significant mixing (due to the $νπ$ interaction) of: (i) the neutron seniorities ($\upsilon_ν$) and (ii) the neutron angular momentum ($I_ν$). The above features have a weak impact on the excitation energies, but have an important impact on the $B(E2)$ transition probabilities. In addition, a constancy of the relative excitation energies irrespective of neutron seniority and neutron number in Sn and Sb was observed.

nucl-ex↗

arXiv2019

ChAKRA : The high resolution charged particle detector array at VECC

A large 4$π$ array of charged particle detectors has been developed at Variable Energy Cyclotron Centre to facilitate high resolution charged particle reaction and spectroscopy studies by detecting event-by-event the charged reaction products emitted in heavy ion reactions at energy $\sim$ 10-60 MeV/A. The forward part ($θ\sim \pm $ $7^{0}$ - $\pm 45^{0}$) of the array consists of 24 highly granular, high resolution charged particle telescopes, each of which is made by three layers [single sided silicon strip($Δ$E) + double sided silicon strip (E/$Δ$E) + CsI(Tl)(E)]of detectors. The backward part of the array consists of 112 CsI(Tl) detectors which are capable of detecting primarily the light charged particles (Z $\le$ 2) emitted in the angular range of $θ\sim \pm $ $45^{0}$ - $\pm 175^{0}$. The extreme forward part of the array ($θ\sim \pm $ $3^{0}$ - $\pm 7^{0}$) is made up of 32 slow-fast plastic phoswich detectors that are capable of detecting light (Z $\le$2) and heavy charged particles (3 $\le$ Z $\lesssim$ 20) as well as handling high count rates. The design, construction and characterization of the array has been described.

physics.ins-det↗

arXiv2018

High performing ionanofluid electrolyte with higher lithium salt concentration for safer lithium metal batteries

A new class of high-performance pyrrolidinium cation based ionanofluid electrolytes with higher lithium salt concentration are developed. The electrolytes are formed by dispersing imidazolium ionic liquid functionalized TiO2 nanoparticles in low conducting, 0.6 M lithium salt doped N-alkyl-N-butylpyrrolidinium bis(trifluoromethylsulfonyl)imide (Pyr14TFSI) ionic liquid (IL) hosted electrolyte. Viscosity, ionic conductivity and thermal properties of these electrolytes are compared with well studied 0.2 M salt doped Pyr14TFSI IL-based electrolyte. The highly crystalline 0.6 M lithium salt dissolved IL-based electrolytes gradually become amorphous with the increasing dispersion of surface functionalized nanoparticles within it. The ionic conductivity of the electrolytes shows unusual viscosity decoupled characteristics and at the 5.0 wt% nanoparticle dispersion it attains a maximum value, higher than that of pure IL host. As compared to pure IL-based electrolytes, the ionanofluid electrolyte also possesses a significantly higher value of lithium ion transference number. The Li/LiMn2O4 cell with the best conducting ionanofluid electrolyte delivers a discharge capacity of about 131 mAh g-1 at 25 degree C at a current density of 24 mA g-1, much higher than that obtained in 0.2 M Li salt dissociated Pyr14TFSI electrolyte (87 mAh g-1). Superior interfacial compatibility between ionanofluid electrolyte and electrodes as indicated by the excellent rate performance with outstanding capacity retention of the cell as compared to pure IL-based analogue, further establish great application potentiality of this optimized newly developed electrolyte for safer LMBs.

physics.app-ph↗

arXiv2018

Broadband pump-probe study of biexcitons in chemically exfoliated layered WS$_{2}$

Strong light-matter interactions in layered transition metal dichalcogenides (TMDs) open up vivid possibilities for novel exciton-based devices. The optical properties of TMDs are dominated mostly by the tightly bound excitons and more complex quasiparticles, the biexcitons. Instead of physically exfoliated monolayers, the solvent-mediated chemical exfoliation of these 2D crystals is a cost-effective, large-scale production method suitable for real device applications. We explore the ultrafast excitonic processes in WS$_{2}$ dispersion using broadband femtosecond pump-probe spectroscopy at room temperature. We detect the biexcitons experimentally and calculate their binding energies, in excellent agreement with earlier theoretical predictions. Using many-body physics, we show that the excitons act like Weiner-Mott excitons and explain the origin of excitons via first-principles calculations. Our detailed time-resolved investigation provides ultrafast radiative and non-radiative lifetimes of excitons and biexcitons in WS$_{2}$. Indeed, our results demonstrate the potential for excitonic quasiparticle-controlled TMDs-based devices operating at room temperature.

cond-mat.mtrl-sci↗

arXiv2018

Fission fragment mass distribution in $^{210}$Po and $^{213}$At

Background: The influence of shell effect on the dynamics of the fusion fission process and it's evolution with excitation energy in the pre-actinide Hg-Pb region in general is a matter of intense research in recent years. In particular, a strong ambiguity remains for the neutron shell closed $^{210}$Po nucleus regarding the role of shell effect in fission around $\approx$ 30 - 40 MeV of excitation energy. Purpose: We have measured the fission fragment mass distribution of $^{210}$Po populated using fusion of $^{4}$He + $^{206}$Pb at different excitation energies and compare the result with recent theoretical predictions as well as with our previous measurement for the same nucleus populated through a different entrance channel. Mass distribution in the fission of the neighbouring nuclei $^{213}$At is also studied for comparison. Methods: Two large area Multi-wire Proportional Counters (MWPC) were used for complete kinematical measurement of the coincident fission fragments. The time of flight differences of the coincident fission fragments were used to directly extract the fission fragment mass distributions. Results: The measured fragment mass distribution for the reactions $^{4}$He + $^{206}$Pb and $^{4}$He + $^{209}$Bi were symmetric and the width of the mass distributions were found to increase monotonically with excitation energy above 36.7 MeV and 32.9 MeV, respectively, indicating the absence of shell effects at the saddle. However, in the fission of $^{210}$Po, we find minor deviation from symmetric mass distributions at the lowest excitation energy (30.8 MeV). Conclusion: Persistence of shell effect in fission fragment mass distribution of $^{210}$Po was observed at the excitation energy $\approx$ 31 MeV as predicted by the theory; at higher excitation energy, however, the present study reaffirms the absence of any shell correction in the fission of $^{210}$Po.

nucl-ex↗

arXiv2017

Mechanics of a granular skin

Magic Sand, a hydrophobic toy granular material, is widely used in popular science instructions because of its non-intuitive mechanical properties. A detailed study of the failure of an underwater column of magic sand shows that these properties can be traced to a single phenomenon: the system self-generates a cohesive skin that encapsulates the material inside. The skin, consists of pinned air-water-grain interfaces, shows multi-scale mechanical properties: they range from contact-line dynamics in the intra-grain roughness scale, plastic flow at the grain scale, all the way to the sample-scale mechanical responses. With decreasing rigidity of the skin, the failure mode transforms from brittle to ductile (both of which are collective in nature) to a complete disintegration at the single grain scale.

cond-mat.soft↗

arXiv2017

Rheology of hydrating cement paste: crossover between two aging processes

The roles of applied strain and temperature on the hydration dynamics of cement paste are uncovered in the present study. We find that the system hardens over time through two different aging processes. The first process dominates the initial period of hydration and is characterized by the shear stress $σ$ varying sub-linearly with the strain-rate $\dotγ$; during this process the system is in a relatively low-density state and the inter-particle interactions are dominated by hydrodynamic lubrication. At a later stage of hydration the system evolves to a high-density state where the interactions become frictional, and $σ$ varies super-linearly with $\dotγ$; this is identified as the second process. An instability, indicated by a drop in $σ$, that is non-monotonic with $\dotγ$ and can be tuned by temperature, separates the two processes. Both from rheology and microscopy studies we establish that the observed instability is related to fracture mechanics of space-filling structure.

cond-mat.soft↗

arXiv2016

Curvilinear polyhedra as dynamical arenas, illustrated by an example of self-organized locomotion

Experiment shows that dumbbells, placed inside a tilted hollow cylindrical drum that rotates slowly around its axis, climb uphill by forming dynamically stable pairs, seemingly against the pull of gravity. Analysis of this experiment shows that the dynamics takes place in an underlying space which is a curvilinear polyhedron inside a six dimensional manifold, carved out by unilateral constraints that arise from the non-interpenetrability of the dumbbells. The energetics over this polyhedron localizes the configuration point within the close proximity of a corner of the polyhedron. This results into a strong entrapment, which provides the configuration of the dumbbells with its observed shape that leads to its functionality -- uphill locomotion. The stability of the configuration is a consequence of the strong entrapment in the corner of the polyhedron.

nlin.AO↗

arXiv2016

Fission fragment mass distributions in reactions populating 200Pb

The fission fragment mass distributions have been measured in the reactions 16O + 184W and 19F+ 181Ta populating the same compound nucleus 200Pb? at similar excitation energies. It is found that the widths of the mass distribution increases monotonically with excitation energy, indicating the absence of quasi-fission for both reactions. This is contrary to two recent claims of the presence of quasi-fission in the above mentioned reactions.

nucl-ex↗

arXiv2016

Shape coexistence in 153Ho

The high-spin states in 153Ho, have been studied by 139 57 La(20Ne, 6n) reaction at a projectile energy of 139 MeV at Variable Energy Cyclotron Centre (VECC), Kolkata, India, utilizing an earlier campaign of Indian National Gamma Array (INGA) setup. Data from gamma-gamma coincidence, directional correlation and polarization measurements have been analyzed to assign and confirm the spins and parities of the levels. We have suggested a few additions and revisions of the reported level scheme of 153Ho. The RF-gamma time difference spectra have been useful to confirm the half-life of an isomer in this nucleus. From the comparison of experimental and theoretical results, it is found that there are definite indications of shape coexistence in this nucleus. The experimental and calculated lifetimes of several isomers have been compared to follow the coexistence and evolution of shape with increasing spin.

nucl-ex↗