arXiv subjects

S. Bilokin

Publications and source records attributed to S. Bilokin.

At least 73 records · Page 4Linked to original sources

arXiv2020

Exclusive $B^0 \to π^- \ell^+ ν_\ell$ Decays with Hadronic Full Event Interpretation Tagging in 34.6 fb$^{-1}$ of Belle II Data

We present the results of the re-discovery of the decay $B^0 \to π^- \ell^+ ν_\ell$ in 34.6 fb$^{-1}$ of Belle II data using hadronic $B$-tagging via the Full Event Interpretation algorithm. We observe 21 signal events on a background of 155 in a fit to the distribution of the square of the missing mass, $M_{\mathrm{miss}}^2$, with a significance of 5.69$σ$, and determine a total branching fraction of (1.58 $\pm$ 0.43$_{\mathrm{stat}}$ $\pm$ 0.07$_{\mathrm{sys}}$) $\times 10^{-4}$.

hep-ex↗

arXiv2020

Studies of the semileptonic $\bar B^0\to D^{*+}\ell^-\barν_\ell$ and $B^-\to D^{0}\ell^-\barν_\ell$ decay processes with 34.6 fb$^{-1}$ of Belle II data

We report measurements of the $\bar{B}^0 \to D^{*+} \ell^{-} \barν_l$ and $B^- \to D^{0} \ell^{-} \barν_l$ processes using 34.6 fb$^{-1}$ of collision events recorded by the Belle II experiment at the SuperKEKB asymmetric-energy $e^+ e^-$ collider. For the $B^-\to D^{0}\ell^-\barν_\ell$ channel, we present first studies that isolate this decay from other semileptonic processes and backgrounds. We report a measurement of the $\bar{B}^0 \to D^{*+} \ell^{-} \barν_l$ branching fraction and obtain ${\cal B}(\bar{B}^0 \to D^{*+} \ell^{-} \barν_l) = \left(4.60 \pm 0.05_{\mathrm{stat}}\pm0.17_{\mathrm{syst}} \pm 0.45_{π_s}\right) \%$, in agreement with the world average. Here, the uncertainties are statistical, systematic, and related to slow pion reconstruction, respectively. The systematic uncertainties are limited by the statistics of auxiliary measurements and will improve in the future. We also report differential branching fractions in five bins of the hadronic recoil parameter $w$ for $\bar{B}^0 \to D^{*+} \ell^{-} \barν_l$, unfolded to account for resolution and efficiency effects.

hep-ex↗

arXiv2020

A calibration of the Belle II hadronic tag-side reconstruction algorithm with $B \rightarrow X\ell ν$ decays

Tag-side reconstruction is an important method for reconstructing $B$ meson decays with missing energy. The Belle II tag-side reconstruction algorithm, Full Event Interpretation, relies on a hierarchical reconstruction of $B$ meson decays with multivariate classification employed at each stage of reconstruction. Given the large numbers of classifiers employed and decay chains reconstructed, the performance of the algorithm on data and simulation differs significantly. Here, calibration factors are derived for hadronic tag-side $B$ decays by measuring a signal side decay, $B \rightarrow X\ell ν$, in $34.6$ fb$^{-1}$ of Belle II data. For a very loose selection on the tag-side $B$ multivariate classifier, the calibration factors are $0.65 \pm 0.02$ and $0.83 \pm 0.03$ for tag-side $B^{+}$ and $B^{0}$ mesons, respectively.

hep-ex↗

arXiv2020

Rediscovery of $B \to ϕK^{()}$ decays and measurement of the longitudinal polarization fraction $f_L$ in $B \to ϕK^{}$ decays using the Summer 2020 Belle II dataset

We utilize a sample of 34.6 fb$^{-1}$, collected by the Belle II experiment at the SuperKEKB asymmetric energy $e^+e^-$ collider, to search for the $B^+ \to ϕK^+$, $B^+ \to ϕK^{*+}$, $B^0 \to ϕK^0_S$, and $B^0 \to ϕK^{*0}$ decays. Charmless hadronic $B$ decays represent an important part of the Belle II physics program, and are an ideal benchmark to test the detector capabilities in terms of tracking efficiency, charged particle identification, vertexing, and advanced analysis techniques. Each channel is observed with a significance that exceeds 5 standard deviations, and we obtain measurements of their branching ratios that are in good agreement with the world averages. For the $B \to ϕK^*$ modes, we also perform a measurement of the longitudinal polarization fraction $f_L$.

hep-ex↗

arXiv2020

First flavor tagging calibration using 2019 Belle II data

We report on the first calibration of the standard Belle II $B$-flavor tagger using the full data set collected at the $Υ(4{\rm S})$ resonance in 2019 with the Belle II detector at the SuperKEKB collider, corresponding to 8.7 fb$^{-1}$ of integrated luminosity. The calibration is performed by reconstructing various hadronic charmed $B$-meson decays with flavor-specific final states. We use simulation to optimize our event selection criteria and to train the flavor tagging algorithm. We determine the tagging efficiency and the fraction of wrongly identified tag-side $B$~candidates from a measurement of the time-integrated $B^0-\overline{B}^0$ mixing probability. The total effective efficiency is measured to be $\varepsilon_{\rm eff} = \big(33.8 \pm 3.6(\text{stat}) \pm 1.6(\text{sys})\big)\%$, which is in good agreement with the predictions from simulation and comparable with the best one obtained by the Belle experiment. The results show a good understanding of the detector performance and offer a basis for future calibrations.

hep-ex↗

arXiv2020

Measurement of the branching fraction ${\cal B}(\bar B^0\to D^{*+}\ell^-\barν_\ell)$ with early Belle II data

We measure the branching fractions for the decays $\bar{B}^0 \to D^{*+} e^{-} \barν_e$ and $\bar{B}^0 \to D^{*+} μ^{-} \barν_μ$ using $8.70 \pm 0.09~{\rm fb}^{-1}$ of data collected by the Belle II experiment at the SuperKEKB asymmetric-energy $e^+ e^-$ collider. Candidate signal decays are reconstructed with the subsequent decays $D^{*+}\to D^0 π^+$ and $D^0\to K^-π^+$. We obtain the results ${\cal B}(\bar{B}^0 \to D^{*+} e^{-} \barν_e)$ = $(4.55\pm0.14(\mathrm{stat})\pm0.35 (\mathrm{syst})) \%$ and ${\cal B}(\bar{B}^0 \to D^{*+} μ^{-} \barν_μ)$ = $(4.84\pm 0.13(\mathrm{stat})\pm0.37(\mathrm{syst})) \%$, in agreement with the world averages. The measurements serve to validate the full chain of detector operation and calibration, data collection and processing, and production of physics results in the case of semileptonic $B$-meson decays.

hep-ex↗

arXiv2020

Charmless $B$ decay reconstruction in 2019 Belle II data

We report on the reconstruction of various charmless $B$ decays from electron-positron collisions at the energy corresponding to the $Υ(4S)$ resonance collected with the Belle II detector at the SuperKEKB collider. We use simulation to devise optimized event selections and apply them to the full data set collected in 2019, corresponding to 8.7\,fb$^{-1}$ of integrated luminosity. We fit the difference between half of the collision energy and the $B$ candidate energy (in the $Υ(4S)$ frame) for events restricted to a signal-rich range in beam-energy-constrained mass to search for charmless signals. Signal yields of approximately 80, 15, 20, 30, 90, and 160 decays are reconstructed for the channels $B^0 \to K^+π^-$, $B^0 \to π^+π^-$, $B^+ \to K^0_S(\to π^+π^-)π^+$, $B^+ \to K^+π^0(\to γγ)$, $B^+ \to K^+K^-K^+$, and $B^+ \to K^+π^-π^+$, respectively. Yields and background contaminations are compatible with those expected from simulation and comparable with those obtained by the Belle experiment. The results show a good understanding of the detector performance and offer a reliable basis to assess projections for future reach.

hep-ex↗

arXiv2020

Measurement of the $B^0$ lifetime using fully reconstructed hadronic decays in the 2019 Belle II dataset

This document presents the measurement of $B^0$ meson lifetimes using the 2019 Belle II dataset that corresponds to an integrated luminosity of $8.7 \pm 0.2$ fb$^{-1}$. Each candidate is fully reconstructed with hadronic decay final states on the signal side, while the rest-of-event technique allows to infer the decay vertex position on the other (tag) side. $B^0$ lifetime is extracted from an unbinned maximum likelihood fit to the distribution of the difference between the signal side $B^0$ candidate and the tag side decay times. The measured lifetime is $τ_{B^0} = 1.48 \pm 0.28 \pm 0.06 $ ps, where the first uncertainty is statistical and the second is systematic.

hep-ex↗

arXiv2019

Measurement of the integrated luminosity of the Phase 2 data of the Belle II experiment

From April to July 2018, a data sample at the peak energy of the $Υ(4S)$ resonance was collected with the Belle~II detector at the SuperKEKB electron-positron collider. This is the first data sample of the Belle~II experiment. Using Bhabha and digamma events, we measure the integrated luminosity of the data sample to be ($496.3 \pm 0.3 \pm 3.0$)~pb$^{-1}$, where the first uncertainty is statistical and the second is systematic. This work provides a basis for future luminosity measurements at Belle~II.

hep-ex↗

arXiv2019

Beam test performance of the highly granular SiW-ECAL technological prototype for the ILC

The technological prototype of the CALICE highly granular silicon-tungsten electromagnetic calorimeter (SiW-ECAL) was tested in a beam at DESY in 2017. The setup comprised seven layers of silicon sensors. Each layer comprised four sensors, with each sensor containing an array of 256 $5.5\times5.5$ mm$^2$ silicon PIN diodes. The four sensors covered a total area of $18\times18$ cm$^2$, and comprised a total of 1024 channels. The readout was split into a trigger line and a charge signal line. Key performance results for signal over noise for the two output lines are presented, together with a study of the uniformity of the detector response. Measurements of the response to electrons for the tungsten loaded version of the detector are also presented.

physics.ins-det↗

arXiv2019

Characterisation of different stages of hadronic showers using the CALICE Si-W ECAL physics prototype

A detailed investigation of hadronic interactions is performed using $π^-$-mesons with energies in the range 2--10 GeV incident on a high granularity silicon-tungsten electromagnetic calorimeter. The data were recorded at FNAL in 2008. The region in which the $π^-$-mesons interact with the detector material and the produced secondary particles are characterised using a novel track-finding algorithm that reconstructs tracks within hadronic showers in a calorimeter in the absence of a magnetic field. The principle of carrying out detector monitoring and calibration using secondary tracks is also demonstrated.

physics.ins-det↗

arXiv2019

Commissioning of the highly granular SiW-ECAL technological prototype

In this article we describe the commissioning and a first analysis of the the beam test performance of a small prototype of a highly granular silicon tungsten calorimeter. The prototype features detector elements with a channel number similar to that envisaged for e.g. the ILD Detector of the International Linear Collider (ILC). The analysis demonstrates the capability of the detector to record signals as low as 0.5 MIP. Further, no loss of performance has been observed when operating the detector in a high magnetic field.

physics.ins-det↗

arXiv2019

Analysis of Testbeam Data of the Highly Granular RPC-Steel CALICE Digital Hadron Calorimeter and Validation of Geant4 Monte Carlo Models

We present a study of the response of the highly granular Digital Hadronic Calorimeter with steel absorbers, the Fe-DHCAL, to positrons, muons, and pions with momenta ranging from 2 to 60 GeV/c. Developed in the context of the CALICE collaboration, this hadron calorimeter utilises Resistive Plate Chambers as active media, interspersed with steel absorber plates. With a transverse granularity of $1\,\times\,1\,$cm$^{2}$ and a longitudinal segmentation of 38 layers, the calorimeter counted 350,208 readout channels, each read out with single-bit resolution (digital readout). The data were recorded in the Fermilab test beam in 2010-11. The analysis includes measurements of the calorimeter response and the energy resolution to positrons and muons, as well as detailed studies of various shower shape quantities. The results are compared to simulations based on Geant4, which utilise different electromagnetic and hadronic physics lists.

physics.ins-det↗

arXiv2017

Measurement of b quark EW couplings at ILC

This paper describes an analysis performed at 250 GeV centre of mass energy for the reaction e+e- -> bbbar with the International Linear Collider, ILC, assuming an integrated luminosity of 500 fb-1. This measurement requires determining the b quark charge, which can be optimally performed using the precise micro-vertex detector of the detector ILD and the charged kaon identification provided by the dE/dx information of its TPC. Given that the forward backward asymmetry is maximal for e-L (Left-handed electron polarisation), it has been necessary to develop a new method to correct for unavoidable angular migration due to b charge mis-measurements. This correction is based on the reconstructed events themselves without introducing external corrections which would induce large uncertainties. With polarized beams, one can separate the Z and photon vector and axial couplings to b quarks. The precision reached is at the few per mill level, and should allow to confirm/discard the deviation observed at LEP1 on the ZbRbR coupling. Model independent upper bounds on the tensor couplings, F2V and F2A, are derived using the shape of the angular distribution.

hep-ex↗

arXiv2017

SiW ECAL for future $e^+e^-$ collider

Calorimeters with silicon detectors have many unique features and are proposed for several world-leading experiments. We discuss the tests of the first three 18x18 cm$^2$ layers segmented into 1024 pixels of the technological prototype of the silicon-tungsten electromagnetic calorimeter for a future $e^+e^-$ collider. The tests have beem performed in November 2015 at CERN SPS beam line.

physics.ins-det↗

arXiv2016

Top physics at high-energy lepton colliders

A summary is presented of the workshop "top physics at linear colliders" that was held at IFIC Valencia from the 30th of June to the 3rd July 2015. We present an up-to-date status report of studies into the potential for top quark physics of lepton colliders with an energy reach that exceeds the top quark pair production threshold, with a focus on the linear collider projects ILC and CLIC. This summary shows that such projects can offer very competitive determinations of top quark properties (mass, width) and its interactions with other Standard Model particles, in particular electroweak gauge bosons and the Higgs boson. In both areas the prospects exceed the LHC potential significantly - often by an order of magnitude.

hep-ex↗

arXiv2016

Resistive Plate Chamber Digitization in a Hadronic Shower Environment

The CALICE Semi-Digital Hadron Calorimeter (SDHCAL) technological prototype is a sampling calorimeter using Glass Resistive Plate Chamber detectors with a three-threshold readout as the active medium. This technology is one of the two options proposed for the hadron calorimeter of the International Large Detector for the International Linear Collider. The prototype was exposed to beams of muons, electrons and pions of different energies at the CERN Super Proton Synchrotron. To be able to study the performance of such a calorimeter in future experiments it is important to ensure reliable simulation of its response. In this paper we present our prototype simulation performed with GEANT4 and the digitization procedure achieved with an algorithm called SimDigital. A detailed description of this algorithm is given and the methods to determinate its parameters using muon tracks and electromagnetic showers are explained. The comparison with hadronic shower data shows a good agreement up to 50 GeV. Discrepancies are observed at higher energies. The reasons for these differences are investigated.

physics.ins-det↗

arXiv2016

DHCAL with Minimal Absorber: Measurements with Positrons

In special tests, the active layers of the CALICE Digital Hadron Calorimeter prototype, the DHCAL, were exposed to low energy particle beams, without being interleaved by absorber plates. The thickness of each layer corresponded approximately to 0.29 radiation lengths or 0.034 nuclear interaction lengths, defined mostly by the copper and steel skins of the detector cassettes. This paper reports on measurements performed with this device in the Fermilab test beam with positrons in the energy range of 1 to 10 GeV. The measurements are compared to simulations based on GEANT4 and a standalone program to emulate the detailed response of the active elements.

physics.ins-det↗