arXiv subjects

S. Bussino

Publications and source records attributed to S. Bussino.

At least 181 records · Page 10Linked to original sources

arXiv2020

Exclusive $B^0 \to π^- \ell^+ ν_\ell$ Decays with Hadronic Full Event Interpretation Tagging in 34.6 fb$^{-1}$ of Belle II Data

We present the results of the re-discovery of the decay $B^0 \to π^- \ell^+ ν_\ell$ in 34.6 fb$^{-1}$ of Belle II data using hadronic $B$-tagging via the Full Event Interpretation algorithm. We observe 21 signal events on a background of 155 in a fit to the distribution of the square of the missing mass, $M_{\mathrm{miss}}^2$, with a significance of 5.69$σ$, and determine a total branching fraction of (1.58 $\pm$ 0.43$_{\mathrm{stat}}$ $\pm$ 0.07$_{\mathrm{sys}}$) $\times 10^{-4}$.

hep-ex↗

arXiv2020

Studies of the semileptonic $\bar B^0\to D^{*+}\ell^-\barν_\ell$ and $B^-\to D^{0}\ell^-\barν_\ell$ decay processes with 34.6 fb$^{-1}$ of Belle II data

We report measurements of the $\bar{B}^0 \to D^{*+} \ell^{-} \barν_l$ and $B^- \to D^{0} \ell^{-} \barν_l$ processes using 34.6 fb$^{-1}$ of collision events recorded by the Belle II experiment at the SuperKEKB asymmetric-energy $e^+ e^-$ collider. For the $B^-\to D^{0}\ell^-\barν_\ell$ channel, we present first studies that isolate this decay from other semileptonic processes and backgrounds. We report a measurement of the $\bar{B}^0 \to D^{*+} \ell^{-} \barν_l$ branching fraction and obtain ${\cal B}(\bar{B}^0 \to D^{*+} \ell^{-} \barν_l) = \left(4.60 \pm 0.05_{\mathrm{stat}}\pm0.17_{\mathrm{syst}} \pm 0.45_{π_s}\right) \%$, in agreement with the world average. Here, the uncertainties are statistical, systematic, and related to slow pion reconstruction, respectively. The systematic uncertainties are limited by the statistics of auxiliary measurements and will improve in the future. We also report differential branching fractions in five bins of the hadronic recoil parameter $w$ for $\bar{B}^0 \to D^{*+} \ell^{-} \barν_l$, unfolded to account for resolution and efficiency effects.

hep-ex↗

arXiv2020

A calibration of the Belle II hadronic tag-side reconstruction algorithm with $B \rightarrow X\ell ν$ decays

Tag-side reconstruction is an important method for reconstructing $B$ meson decays with missing energy. The Belle II tag-side reconstruction algorithm, Full Event Interpretation, relies on a hierarchical reconstruction of $B$ meson decays with multivariate classification employed at each stage of reconstruction. Given the large numbers of classifiers employed and decay chains reconstructed, the performance of the algorithm on data and simulation differs significantly. Here, calibration factors are derived for hadronic tag-side $B$ decays by measuring a signal side decay, $B \rightarrow X\ell ν$, in $34.6$ fb$^{-1}$ of Belle II data. For a very loose selection on the tag-side $B$ multivariate classifier, the calibration factors are $0.65 \pm 0.02$ and $0.83 \pm 0.03$ for tag-side $B^{+}$ and $B^{0}$ mesons, respectively.

hep-ex↗

arXiv2020

Rediscovery of $B \to ϕK^{()}$ decays and measurement of the longitudinal polarization fraction $f_L$ in $B \to ϕK^{}$ decays using the Summer 2020 Belle II dataset

We utilize a sample of 34.6 fb$^{-1}$, collected by the Belle II experiment at the SuperKEKB asymmetric energy $e^+e^-$ collider, to search for the $B^+ \to ϕK^+$, $B^+ \to ϕK^{*+}$, $B^0 \to ϕK^0_S$, and $B^0 \to ϕK^{*0}$ decays. Charmless hadronic $B$ decays represent an important part of the Belle II physics program, and are an ideal benchmark to test the detector capabilities in terms of tracking efficiency, charged particle identification, vertexing, and advanced analysis techniques. Each channel is observed with a significance that exceeds 5 standard deviations, and we obtain measurements of their branching ratios that are in good agreement with the world averages. For the $B \to ϕK^*$ modes, we also perform a measurement of the longitudinal polarization fraction $f_L$.

hep-ex↗

arXiv2020

First flavor tagging calibration using 2019 Belle II data

We report on the first calibration of the standard Belle II $B$-flavor tagger using the full data set collected at the $Υ(4{\rm S})$ resonance in 2019 with the Belle II detector at the SuperKEKB collider, corresponding to 8.7 fb$^{-1}$ of integrated luminosity. The calibration is performed by reconstructing various hadronic charmed $B$-meson decays with flavor-specific final states. We use simulation to optimize our event selection criteria and to train the flavor tagging algorithm. We determine the tagging efficiency and the fraction of wrongly identified tag-side $B$~candidates from a measurement of the time-integrated $B^0-\overline{B}^0$ mixing probability. The total effective efficiency is measured to be $\varepsilon_{\rm eff} = \big(33.8 \pm 3.6(\text{stat}) \pm 1.6(\text{sys})\big)\%$, which is in good agreement with the predictions from simulation and comparable with the best one obtained by the Belle experiment. The results show a good understanding of the detector performance and offer a basis for future calibrations.

hep-ex↗

arXiv2020

Optimization of the JUNO liquid scintillator composition using a Daya Bay antineutrino detector

To maximize the light yield of the liquid scintillator (LS) for the Jiangmen Underground Neutrino Observatory (JUNO), a 20 t LS sample was produced in a pilot plant at Daya Bay. The optical properties of the new LS in various compositions were studied by replacing the gadolinium-loaded LS in one antineutrino detector. The concentrations of the fluor, PPO, and the wavelength shifter, bis-MSB, were increased in 12 steps from 0.5 g/L and <0.01 mg/L to 4 g/L and 13 mg/L, respectively. The numbers of total detected photoelectrons suggest that, with the optically purified solvent, the bis-MSB concentration does not need to be more than 4 mg/L. To bridge the one order of magnitude in the detector size difference between Daya Bay and JUNO, the Daya Bay data were used to tune the parameters of a newly developed optical model. Then, the model and tuned parameters were used in the JUNO simulation. This enabled to determine the optimal composition for the JUNO LS: purified solvent LAB with 2.5 g/L PPO, and 1 to 4 mg/L bis-MSB.

physics.ins-det↗

arXiv2020

Measurement of the branching fraction ${\cal B}(\bar B^0\to D^{*+}\ell^-\barν_\ell)$ with early Belle II data

We measure the branching fractions for the decays $\bar{B}^0 \to D^{*+} e^{-} \barν_e$ and $\bar{B}^0 \to D^{*+} μ^{-} \barν_μ$ using $8.70 \pm 0.09~{\rm fb}^{-1}$ of data collected by the Belle II experiment at the SuperKEKB asymmetric-energy $e^+ e^-$ collider. Candidate signal decays are reconstructed with the subsequent decays $D^{*+}\to D^0 π^+$ and $D^0\to K^-π^+$. We obtain the results ${\cal B}(\bar{B}^0 \to D^{*+} e^{-} \barν_e)$ = $(4.55\pm0.14(\mathrm{stat})\pm0.35 (\mathrm{syst})) \%$ and ${\cal B}(\bar{B}^0 \to D^{*+} μ^{-} \barν_μ)$ = $(4.84\pm 0.13(\mathrm{stat})\pm0.37(\mathrm{syst})) \%$, in agreement with the world averages. The measurements serve to validate the full chain of detector operation and calibration, data collection and processing, and production of physics results in the case of semileptonic $B$-meson decays.

hep-ex↗

arXiv2020

Charmless $B$ decay reconstruction in 2019 Belle II data

We report on the reconstruction of various charmless $B$ decays from electron-positron collisions at the energy corresponding to the $Υ(4S)$ resonance collected with the Belle II detector at the SuperKEKB collider. We use simulation to devise optimized event selections and apply them to the full data set collected in 2019, corresponding to 8.7\,fb$^{-1}$ of integrated luminosity. We fit the difference between half of the collision energy and the $B$ candidate energy (in the $Υ(4S)$ frame) for events restricted to a signal-rich range in beam-energy-constrained mass to search for charmless signals. Signal yields of approximately 80, 15, 20, 30, 90, and 160 decays are reconstructed for the channels $B^0 \to K^+π^-$, $B^0 \to π^+π^-$, $B^+ \to K^0_S(\to π^+π^-)π^+$, $B^+ \to K^+π^0(\to γγ)$, $B^+ \to K^+K^-K^+$, and $B^+ \to K^+π^-π^+$, respectively. Yields and background contaminations are compatible with those expected from simulation and comparable with those obtained by the Belle experiment. The results show a good understanding of the detector performance and offer a reliable basis to assess projections for future reach.

hep-ex↗

arXiv2020

Measurement of the $B^0$ lifetime using fully reconstructed hadronic decays in the 2019 Belle II dataset

This document presents the measurement of $B^0$ meson lifetimes using the 2019 Belle II dataset that corresponds to an integrated luminosity of $8.7 \pm 0.2$ fb$^{-1}$. Each candidate is fully reconstructed with hadronic decay final states on the signal side, while the rest-of-event technique allows to infer the decay vertex position on the other (tag) side. $B^0$ lifetime is extracted from an unbinned maximum likelihood fit to the distribution of the difference between the signal side $B^0$ candidate and the tag side decay times. The measured lifetime is $τ_{B^0} = 1.48 \pm 0.28 \pm 0.06 $ ps, where the first uncertainty is statistical and the second is systematic.

hep-ex↗

arXiv2020

Mechanical Ventilator Milano (MVM): A Novel Mechanical Ventilator Designed for Mass Scale Production in Response to the COVID-19 Pandemic

Presented here is the design of the Mechanical Ventilator Milano (MVM), a novel mechanical ventilator designed for rapid mass production in response to the COVID-19 pandemic to address the urgent shortage of intensive therapy ventilators in many countries, and the growing difficulty in procuring these devices through normal supply chains across borders. This ventilator is an electro-mechanical equivalent of the old and reliable Manley Ventilator, and is able to operate in both pressure-controlled and pressure-supported ventilation modes. MVM is optimized for the COVID-19 emergency, thanks to the collaboration with medical doctors in the front line. MVM is designed for large-scale production in a short amount of time and at a limited cost, as it relays on off-the-shelf components, readily available worldwide. Operation of the MVM requires only a source of compressed oxygen (or compressed medical air) and electrical power. Initial tests of a prototype device with a breathing simulator are also presented. Further tests and developments are underway. At this stage the MVM is not yet a certified medical device but certification is in progress.

physics.med-ph↗

arXiv2020

Search for an invisibly decaying $Z^{\prime}$ boson at Belle II in $e^+ e^- \to μ^+ μ^- (e^{\pm} μ^{\mp})$ plus missing energy final states

Theories beyond the standard model often predict the existence of an additional neutral boson, the $Z^{\prime}$. Using data collected by the Belle II experiment during 2018 at the SuperKEKB collider, we perform the first searches for the invisible decay of a $Z^{\prime}$ in the process $e^+ e^- \to μ^+ μ^- Z^{\prime}$ and of a lepton-flavor-violating $Z^{\prime}$ in $e^+ e^- \to e^{\pm} μ^{\mp} Z^{\prime}$. We do not find any excess of events and set 90\% credibility level upper limits on the cross sections of these processes. We translate the former, in the framework of an $L_μ-L_τ$ theory, into upper limits on the $Z^{\prime}$ coupling constant at the level of $5 \times 10^{-2}$ -- $1$ $M_{Z^\prime}\leq 6$ GeV/$c^2$.

hep-ex↗

arXiv2020

Effective field theory interactions for liquid argon target in DarkSide-50 experiment

We reanalize data collected with the DarkSide-50 experiment and recently used to set limits on the spin-independent interaction rate of weakly interacting massive particles (WIMPs) on argon nuclei with an effective field theory framework. The dataset corresponds to a total (16660 $\pm$ 270) kg d exposure using a target of low-radioactivity argon extracted from underground sources. We obtain upper limits on the effective couplings of the 12 leading operators in the nonrelativistic systematic expansion. For each effective coupling we set constraints on WIMP-nucleon cross sections, setting upper limits between $2.4 \times 10^{-45} \, \mathrm{cm}^2$ and $2.3 \times 10^{-42} \, \mathrm{cm}^2$ (8.9 $\times 10^{-45} \, \mathrm{cm}^2$ and 6.0 $\times 10^{-42} \, \mathrm{cm}^2$) for WIMPs of mass of 100 $\mathrm{GeV/c^2}$ (1000 $\mathrm{GeV/c^2}$) at 90\% confidence level.

hep-ex↗

arXiv2020

Design and construction of a new detector to measure ultra-low radioactive-isotope contamination of argon

Large liquid argon detectors offer one of the best avenues for the detection of galactic weakly interacting massive particles (WIMPs) via their scattering on atomic nuclei. The liquid argon target allows exquisite discrimination between nuclear and electron recoil signals via pulse-shape discrimination of the scintillation signals. Atmospheric argon (AAr), however, has a naturally occurring radioactive isotope, $^{39}$Ar, a $β$ emitter of cosmogenic origin. For large detectors, the atmospheric $^{39}$Ar activity poses pile-up concerns. The use of argon extracted from underground wells, deprived of $^{39}$Ar, is key to the physics potential of these experiments. The DarkSide-20k dark matter search experiment will operate a dual-phase time projection chamber with 50 tonnes of radio-pure underground argon (UAr), that was shown to be depleted of $^{39}$Ar with respect to AAr by a factor larger than 1400. Assessing the $^{39}$Ar content of the UAr during extraction is crucial for the success of DarkSide-20k, as well as for future experiments of the Global Argon Dark Matter Collaboration (GADMC). This will be carried out by the DArT in ArDM experiment, a small chamber made with extremely radio-pure materials that will be placed at the centre of the ArDM detector, in the Canfranc Underground Laboratory (LSC) in Spain. The ArDM LAr volume acts as an active veto for background radioactivity, mostly $γ$-rays from the ArDM detector materials and the surrounding rock. This article describes the DArT in ArDM project, including the chamber design and construction, and reviews the background required to achieve the expected performance of the detector.

astro-ph.IM↗

arXiv2019

Measurement of the integrated luminosity of the Phase 2 data of the Belle II experiment

From April to July 2018, a data sample at the peak energy of the $Υ(4S)$ resonance was collected with the Belle~II detector at the SuperKEKB electron-positron collider. This is the first data sample of the Belle~II experiment. Using Bhabha and digamma events, we measure the integrated luminosity of the data sample to be ($496.3 \pm 0.3 \pm 3.0$)~pb$^{-1}$, where the first uncertainty is statistical and the second is systematic. This work provides a basis for future luminosity measurements at Belle~II.

hep-ex↗

arXiv2019

Measurement of the ion fraction and mobility of $^{218}$Po produced in $^{222}$Rn decays in liquid argon

We report measurements of the charged daughter fraction of $^{218}$Po as a result of the $^{222}$Rn alpha decay, and the mobility of $^{218}$Po$^+$ ions, using radon-polonium coincidences from the $^{238}$U chain identified in 532 live-days of DarkSide-50 WIMP-search data. The fraction of $^{218}$Po that is charged is found to be 0.37$\pm$0.03 and the mobility of $^{218}$Po$^+$ is (8.6$\pm$0.1)$\times$10$^{-4}$$\frac{\text{cm}^2}{\text{Vs}}$.

astro-ph.IM↗

arXiv2019

Distillation and stripping pilot plants for the JUNO neutrino detector: design, operations and reliability

This paper describes the design, construction principles and operations of the distillation and stripping pilot plants tested at the Daya Bay Neutrino Laboratory, with the perspective to adapt this processes, system cleanliness and leak-tightness to the final full scale plants that will be used for the purification of the liquid scintillator used in the JUNO neutrino detector. The main goal of these plants is to remove radio impurities from the liquid scintillator while increasing its optical attenuation length. Purification of liquid scintillator will be performed with a system combining alumina oxide, distillation, water extraction and steam (or N2 gas) stripping. Such a combined system will aim at obtaining a total attenuation length greater than 20 m at 430 nm, and a bulk radiopurity for 238U and 232Th in the 10-15 to 10-17 g/g range. The pilot plants commissioning and operation have also provided valuable information on the degree of reliability of their main components, which will be particularly useful for the design of the final full scale purification equipment for the JUNO liquid scintillator. This paper describe two of the five pilot plants since the Alumina Column, Fluor mixing and the Water Extraction plants are in charge of the Chinese part of the collaboration.

physics.ins-det↗

arXiv2019

GIGJ: a crustal gravity model of the Guangdong Province for predicting the geoneutrino signal at the JUNO experiment

Gravimetric methods are expected to play a decisive role in geophysical modeling of the regional crustal structure applied to geoneutrino studies. GIGJ (GOCE Inversion for Geoneutrinos at JUNO) is a 3D numerical model constituted by ~46 x 10$^{3}$ voxels of 50 x 50 x 0.1 km, built by inverting gravimetric data over the 6° x 4° area centered at the Jiangmen Underground Neutrino Observatory (JUNO) experiment, currently under construction in the Guangdong Province (China). The a-priori modeling is based on the adoption of deep seismic sounding profiles, receiver functions, teleseismic P-wave velocity models and Moho depth maps, according to their own accuracy and spatial resolution. The inversion method allowed for integrating GOCE data with the a-priori information and regularization conditions through a Bayesian approach and a stochastic optimization. GIGJ fits the homogeneously distributed GOCE gravity data, characterized by high accuracy, with a ~1 mGal standard deviation of the residuals, compatible with the observation accuracy. Conversely to existing global models, GIGJ provides a site-specific subdivision of the crustal layers masses which uncertainties include estimation errors, associated to the gravimetric solution, and systematic uncertainties, related to the adoption of a fixed sedimentary layer. A consequence of this local rearrangement of the crustal layer thicknesses is a ~21% reduction and a ~24% increase of the middle and lower crust expected geoneutrino signal, respectively. Finally, the geophysical uncertainties of geoneutrino signals at JUNO produced by unitary uranium and thorium abundances distributed in the upper, middle and lower crust are reduced by 77%, 55% and 78%, respectively. The numerical model is available at http://www.fe.infn.it/u/radioactivity/GIGJ

physics.geo-ph↗

arXiv2018

DarkSide-50 532-day Dark Matter Search with Low-Radioactivity Argon

The DarkSide-50 direct-detection dark matter experiment is a dual-phase argon time projection chamber operating at Laboratori Nazionali del Gran Sasso. This paper reports on the blind analysis of a (16,660+-270) kg d exposure using a target of low-radioactivity argon extracted from underground sources. We find no events in the dark matter selection box and set a 90% C.L. upper limit on the dark matter-nucleon spin-independent cross section of 1.14E-44 cm^2 (3.78E-44 cm^2, 3.43E-43 cm^2) for a WIMP mass of 100 GeV/c^2 (1 TeV/c^2, 10 TeV/c^2).

astro-ph.CO↗