SearcharxivSearch

arXiv subjects

S. C. Wong

Publications and source records attributed to S. C. Wong.

9 recordsLinked to original sources

Occlusion-induced risk and interventions in pedestrian-autonomous truck interactions on multi-lane roads: A virtual reality study

Autonomous trucks (ATs) may introduce distinct pedestrian-safety risks because of their large physical dimensions, constrained braking capability, limited driver-based communication cues, and potential to occlude surrounding traffic. This study employed a controlled virtual reality experiment with 54 participants to investigate pedestrian-AT interaction risk in an unsignalized multi-lane crossing scenario and to evaluate occlusion-targeted risk mitigation strategies. The experiment examined the effects of near-side vehicle type, weather condition, and far-side vehicle yielding strategy on pedestrian behavior, perceived risk, and objective safety. Based on a representative high-risk scenario, three targeted interventions were designed and tested: an environment-aware external human-machine interface (eHMI), a projected eHMI, and an auditory warning. The results showed that ATs increased perceived risk and encouraged more cautious crossing behavior, suggesting a risk-compensation effect. However, this compensation was weakened under rainy conditions, where braking-related safety margins were reduced. AT-induced occlusion further increased far-side interaction risk by limiting pedestrians' recognition of hidden vehicles. Among the three interventions, the projected eHMI showed the best overall performance, improving objective safety margins, enhancing risk awareness, and supporting behavioral adjustment. These findings highlight the need for AT-specific interface and warning strategies that address both intention communication and risk localization.

cs.HC

Are eHMIs always helpful? Investigating how eHMIs interfere with pedestrian behavior on multi-lane streets: An eye-tracking virtual reality experiment

Appropriate communication is crucial for efficient and safe interactions between pedestrians and autonomous vehicles (AVs). External human-machine interfaces (eHMIs) on AVs, which can be categorized as allocentric or egocentric, are considered a promising solution. While the effectiveness of eHMIs has been extensively studied, in complex environments, such as unsignalized multi-lane streets, their potential to interfere with pedestrian crossing behavior remains underexplored. Hence, a virtual reality-based experiment was conducted to examine how different types of eHMIs displayed on AVs affect the crossing behavior of pedestrians in multi-lane streets environments, with a focus on the gaze patterns of pedestrians during crossing. The results revealed that the presence of eHMIs significantly influenced the cognitive load on pedestrians and increased the possibility of distraction, even misleading pedestrians in cases involving multiple AVs on multi-lane streets. Notably, allocentric eHMIs induced higher cognitive loads and greater distraction in pedestrians than egocentric eHMIs. This was primarily evidenced by longer gaze time and higher proportions of attention for the eHMI on the interacting vehicle, as well as a broader distribution of gaze toward vehicles in the non-interacting lane. However, misleading behavior was mainly triggered by eHMI signals from yielding vehicles in the non-interacting lane. Under such asymmetric signal configurations, egocentric eHMIs resulted in a higher misjudgment rate than allocentric eHMIs. These findings highlight the importance of enhancing eHMI designs to balance the clarity and consistency of the displayed information across different perspectives, especially in complex multi-lane traffic scenarios. This study provides valuable insights regarding the application and standardization of future eHMI systems for AVs.

cs.HC

CVVLSNet: Vehicle Location and Speed Estimation Using Partial Connected Vehicle Trajectory Data

Real-time estimation of vehicle locations and speeds is crucial for developing many beneficial transportation applications in traffic management and control, e.g., adaptive signal control. Recent advances in communication technologies facilitate the emergence of connected vehicles (CVs), which can share traffic information with nearby CVs or infrastructures. At the early stage of connectivity, only a portion of vehicles are CVs. The locations and speeds for those non-CVs (NCs) are not accessible and must be estimated to obtain the full traffic information. To address the above problem, this paper proposes a novel CV-based Vehicle Location and Speed estimation network, CVVLSNet, to simultaneously estimate the vehicle locations and speeds exclusively using partial CV trajectory data. A road cell occupancy (RCO) method is first proposed to represent the variable vehicle state information. Spatiotemporal interactions can be integrated by simply fusing the RCO representations. Then, CVVLSNet, taking the Coding-RAte TransformEr (CRATE) network as a backbone, is introduced to estimate the vehicle locations and speeds. Moreover, physical vehicle size constraints are also considered in loss functions. Extensive experiments indicate that the proposed method significantly outperformed the existing method under various CV penetration rates, signal timings, and volume-to-capacity ratios.

cs.CV

Domain Adversarial Spatial-Temporal Network: A Transferable Framework for Short-term Traffic Forecasting across Cities

Accurate real-time traffic forecast is critical for intelligent transportation systems (ITS) and it serves as the cornerstone of various smart mobility applications. Though this research area is dominated by deep learning, recent studies indicate that the accuracy improvement by developing new model structures is becoming marginal. Instead, we envision that the improvement can be achieved by transferring the "forecasting-related knowledge" across cities with different data distributions and network topologies. To this end, this paper aims to propose a novel transferable traffic forecasting framework: Domain Adversarial Spatial-Temporal Network (DASTNet). DASTNet is pre-trained on multiple source networks and fine-tuned with the target network's traffic data. Specifically, we leverage the graph representation learning and adversarial domain adaptation techniques to learn the domain-invariant node embeddings, which are further incorporated to model the temporal traffic data. To the best of our knowledge, we are the first to employ adversarial multi-domain adaptation for network-wide traffic forecasting problems. DASTNet consistently outperforms all state-of-the-art baseline methods on three benchmark datasets. The trained DASTNet is applied to Hong Kong's new traffic detectors, and accurate traffic predictions can be delivered immediately (within one day) when the detector is available. Overall, this study suggests an alternative to enhance the traffic forecasting methods and provides practical implications for cities lacking historical traffic data.

cs.LG

Turning Traffic Monitoring Cameras into Intelligent Sensors for Traffic Density Estimation

Accurate traffic state information plays a pivotal role in the Intelligent Transportation Systems (ITS), and it is an essential input to various smart mobility applications such as signal coordination and traffic flow prediction. The current practice to obtain the traffic state information is through specialized sensors such as loop detectors and speed cameras. In most metropolitan areas, traffic monitoring cameras have been installed to monitor the traffic conditions on arterial roads and expressways, and the collected videos or images are mainly used for visual inspection by traffic engineers. Unfortunately, the data collected from traffic monitoring cameras are affected by the 4L characteristics: Low frame rate, Low resolution, Lack of annotated data, and Located in complex road environments. Therefore, despite the great potentials of the traffic monitoring cameras, the 4L characteristics hinder them from providing useful traffic state information (e.g., speed, flow, density). This paper focuses on the traffic density estimation problem as it is widely applicable to various traffic surveillance systems. To the best of our knowledge, there is a lack of the holistic framework for addressing the 4L characteristics and extracting the traffic density information from traffic monitoring camera data. In view of this, this paper proposes a framework for estimating traffic density using uncalibrated traffic monitoring cameras with 4L characteristics. The proposed framework consists of two major components: camera calibration and vehicle detection. The camera calibration method estimates the actual length between pixels in the images and videos, and the vehicle counts are extracted from the deep-learning-based vehicle detection method. Combining the two components, high-granular traffic density can be estimated. To validate the proposed framework, two case studies were conducted in Hong Kong and Sacramento. The results show that the Mean Absolute Error (MAE) in camera calibration is less than 0.2 meters out of 6 meters, and the accuracy of vehicle detection under various conditions is approximately 90%. Overall, the MAE for the estimated density is 9.04 veh/km/lane in Hong Kong and 1.30 veh/km/lane in Sacramento. The research outcomes can be used to calibrate the speed-density fundamental diagrams, and the proposed framework can provide accurate and real-time traffic information without installing additional sensors.

cs.CV

Self-supervised Depth Estimation Leveraging Global Perception and Geometric Smoothness Using On-board Videos

Self-supervised depth estimation has drawn much attention in recent years as it does not require labeled data but image sequences. Moreover, it can be conveniently used in various applications, such as autonomous driving, robotics, realistic navigation, and smart cities. However, extracting global contextual information from images and predicting a geometrically natural depth map remain challenging. In this paper, we present DLNet for pixel-wise depth estimation, which simultaneously extracts global and local features with the aid of our depth Linformer block. This block consists of the Linformer and innovative soft split multi-layer perceptron blocks. Moreover, a three-dimensional geometry smoothness loss is proposed to predict a geometrically natural depth map by imposing the second-order smoothness constraint on the predicted three-dimensional point clouds, thereby realizing improved performance as a byproduct. Finally, we explore the multi-scale prediction strategy and propose the maximum margin dual-scale prediction strategy for further performance improvement. In experiments on the KITTI and Make3D benchmarks, the proposed DLNet achieves performance competitive to those of the state-of-the-art methods, reducing time and space complexities by more than $62\%$ and $56\%$, respectively. Extensive testing on various real-world situations further demonstrates the strong practicality and generalization capability of the proposed model.

cs.CV

Large-scale pedestrian flow experiments under high-density conditions

Despite the vast amount of studies on pedestrian flow, the data concerning high densities are still very inadequate. We organize one large-scale pedestrian flow experiment on a ring corridor. With 278 participants, the density as high as 9 m^(-2) is reached. In the uni-directional flow, four different states are observed, including the free flow, congested state, over-congested state and hyper-congested state. The features of the hyper-congested state are similar to the "crowd turbulence" reported in the empirical data of Helbing et al., and the transition between the stopped state and the moving state can be found. The flow rates in the over-congested state are nearly constant, due to the downstream propagation of pedestrian clusters. In the bi-directional flow, three different types of lane formations are observed in the experiment: (1) three lanes are directly formed ; (2) two lanes are directly formed; (3) firstly three lanes are formed, and then they transit into two lanes. After the lane formation, some interesting phenomena have been observed, including the inhomogeneous distribution of pedestrians across the lanes, and the formation and dissipation of localized crowd. Our study is expected to help for better understanding and modeling the dynamics of high density pedestrian flow.

physics.soc-ph

A Runge-Kutta discontinuous Galerkin scheme for hyperbolic conservation laws with discontinuous fluxes

The paper proposes a scheme by combining the Runge-Kutta discontinuous Galerkin method with a δ-mapping algorithm for solving hyperbolic conservation laws with discontinuous fluxes. This hybrid scheme is particularly applied to nonlinear elasticity in heterogeneous media and multi-class traffic flow with inhomogeneous road conditions. Numerical examples indicate the scheme's efficiency in resolving complex waves of the two systems. Moreover, the discussion implies that the so-called δ-mapping algorithm can also be combined with any other classical methods for solving similar problems in general.

math.NA

Steady-state traffic flow on a ring road with up- and down- slopes

This paper studies steady-state traffic flow on a ring road with up- and down- slopes using a semi-discrete model. By exploiting the relations between the semi-discrete and the continuum models, a steady-state solution is uniquely determined for a given total number of vehicles on the ring road. The solution is exact and always stable with respect to the first-order continuum model, whereas it is a good approximation with respect to the semi-discrete model provided that the involved equilibrium constant states are linearly stable. In an otherwise case, the instability of one or more equilibria could trigger stop-and-go waves propagating in certain road sections or throughout the ring road. The indicated results are reasonable and thus physically significant for a better understanding of real traffic flow on an inhomogeneous road.

math-ph