SearcharxivSearch

arXiv subjects

S. Cialdi

Publications and source records attributed to S. Cialdi.

10 recordsLinked to original sources

Refractive index in the JUNO liquid scintillator

In the field of rare event physics, it is common to have huge masses of organic liquid scintillator as detection medium. In particular, they are widely used to study neutrino properties or astrophysical neutrinos. Thanks to its safety properties (such as low toxicity and high flash point) and easy scalability, linear alkyl benzene is the most common solvent used to produce liquid scintillators for large mass experiments. The knowledge of the refractive index is a pivotal point to understand the detector response, as this quantity (and its wavelength dependence) affects the Cherenkov radiation and photon propagation in the medium. In this paper, we report the measurement of the refractive index of the JUNO liquid scintillator between 260-1064 nm performed with two different methods (an ellipsometer and a refractometer), with a sub percent level precision. In addition, we used an interferometer to measure the group velocity in the JUNO liquid scintillator and verify the expected value derived from the refractive index measurements.

physics.ins-det

High-order dispersion effects in two-photon interference

Two-photon interference and Hong-Ou-Mandel (HOM) effect are relevant tools for quantum metrology and quantum information processing. In optical coherence tomography, HOM effect is exploited to achieve high-resolution measurements with the width of the HOM dip being the main parameter. On the other hand, applications like dense coding require high-visibility performances. Here we address high-order dispersion effects in two-photon interference and study, theoretically and experimentally, the dependence of the visibility and the width of the HOM dip on both the pump spectrum and the downconverted photon spectrum. In particular, a spatial light modulator is exploited to experimentally introduce and manipulate a custom phase function to simulate the high-order dispersion effects.

quant-ph

Annihilation of low energy antiprotons in silicon

The goal of the AE$\mathrm{\bar{g}}$IS experiment at the Antiproton Decelerator (AD) at CERN, is to measure directly the Earth's gravitational acceleration on antimatter. To achieve this goal, the AE$\mathrm{\bar{g}}$IS collaboration will produce a pulsed, cold (100 mK) antihydrogen beam with a velocity of a few 100 m/s and measure the magnitude of the vertical deflection of the beam from a straight path. The final position of the falling antihydrogen will be detected by a position sensitive detector. This detector will consist of an active silicon part, where the annihilations take place, followed by an emulsion part. Together, they allow to achieve 1$%$ precision on the measurement of $\bar{g}$ with about 600 reconstructed and time tagged annihilations. We present here, to the best of our knowledge, the first direct measurement of antiproton annihilation in a segmented silicon sensor, the first step towards designing a position sensitive silicon detector for the AE$\mathrm{\bar{g}}$IS experiment. We also present a first comparison with Monte Carlo simulations (GEANT4) for antiproton energies below 5 MeV

physics.ins-det

Prospects for measuring the gravitational free-fall of antihydrogen with emulsion detectors

The main goal of the AEgIS experiment at CERN is to test the weak equivalence principle for antimatter. AEgIS will measure the free-fall of an antihydrogen beam traversing a moiré deflectometer. The goal is to determine the gravitational acceleration g for antihydrogen with an initial relative accuracy of 1% by using an emulsion detector combined with a silicon micro-strip detector to measure the time of flight. Nuclear emulsions can measure the annihilation vertex of antihydrogen atoms with a precision of about 1 - 2 microns r.m.s. We present here results for emulsion detectors operated in vacuum using low energy antiprotons from the CERN antiproton decelerator. We compare with Monte Carlo simulations, and discuss the impact on the AEgIS project.

physics.ins-det

Nonlocal compensation of pure phase objects with entangled photons

We suggest and demonstrate a scheme for coherent nonlocal compensation of pure phase objects based on two-photon polarization and momentum entangled states. The insertion of a single phase object on one of the beams reduces the purity of the state and the amount of shared entanglement, whereas the original entanglement can be retrieved by adding a suitable phase object on the other beam. In our setup polarization and momentum entangled states are generated by spontaneous parametric downconversion and then purified using a programmable spatial light modulator, which may be also used to impose arbitrary space dependent phase functions to the beams. As a possible application, we suggest and demonstrate a quantum key distribution protocol based on nonlocal phase compensation.

quant-ph

Experimental estimation of one-parameter qubit gates in the presence of phase diffusion

We address estimation of one-parameter qubit gates in the presence of phase diffusion. We evaluate the ultimate quantum limits to precision, seek for optimal probes and measurements, and demonstrate an optimal estimation scheme for polarization qubits. An adaptive method to achieve optimal estimation in any working regime is also analyzed in details and experimentally implemented.

quant-ph

Apparent superluminal advancement of a single photon far beyond its coherence length

We present experimental results relative to superluminal propagation based on a single photon traversing an optical system, called 4f-system, which acts singularly on the photon's spectral component phases. A single photon is created by a CW laser light down{conversion process. The introduction of a linear spectral phase function will lead to the shift of the photon peak far beyond the coherence length of the photon itself (an apparent superluminal propagation of the photon). Superluminal group velocity detection is done by interferometric measurement of the temporal shifted photon with its correlated untouched reference. The observed superluminal photon propagation complies with causality. The operation of the optical system allows to enlighten the origin of the apparent superluminal photon velocity. The experiment foresees a superluminal effect with single photon wavepackets.

physics.optics

Efficient positronium laser excitation for antihydrogen production in a magnetic field

Antihydrogen production by charge exchange reaction between Positronium (Ps) atoms and antiprotons requires an efficient excitation of Ps atoms up to high-n levels (Rydberg levels). In this study it is assumed that a Ps cloud is produced within a relatively strong uniform magnetic field (1 Tesla) and with a relatively high temperature (100 K). Consequently, the structure of energy levels are deeply modified by Zeeman and motional Stark effects. A two-step laser light excitation, the first one from ground to n=3 and the second from this level to a Rydberg level, is proposed and the physics of the problem is discussed. We derive a simple formula giving the absorption probability with substantially incoherent laser pulses. A 30% population deposition in high-$n$ states can be reached with feasible lasers suitably tailored in power and spectral bandwidth.

quant-ph

Formation Of A Cold Antihydrogen Beam in AEGIS For Gravity Measurements

The formation of the antihydrogen beam in the AEGIS experiment through the use of inhomogeneous electric fields is discussed and simulation results including the geometry of the apparatus and realistic hypothesis about the antihydrogen initial conditions are shown. The resulting velocity distribution matches the requirements of the gravity experiment. In particular it is shown that the inhomogeneous electric fields provide radial cooling of the beam during the acceleration.

physics.atom-ph

Measurement of the temporal response of ferroelectric cathodes

Ferroelectric ceramics are tested as photocathodes at INFN Frascati Laboratories. In order to characterize them for use in linac injectors it is important to measure the temporal shape of the emitted current. With a duration of the laser pulse of 25 ps, the required resolution is a few ps. An apparatus has been set up for the purpose, consisting of a 30 kV electron gun, a microwave deflecting cavity which translates the temporal distribution of the electron bunch into a spatial one, a fluorescent screen on which the deflected beam traces a sector of a circle and various focusing and charge measuring items. The image on the screen is detected via a CCD camera and a frame grabber. We describe the performance of the apparatus and some preliminary temporal distribution measurements.

physics.acc-ph