arXiv subjects

S. Colombi

Publications and source records attributed to S. Colombi.

At least 127 records · Page 7Linked to original sources

arXiv2011

Planck Early Results: Origin of the submm excess dust emission in the Magellanic Clouds

The integrated Spectral Energy Distributions of the Large and Small Magellanic Cloud appear significantly flatter than expected from dust models based on their FIR and radio emission. The origin of this millimetre excess is still unexplained, and is here investigated using the Planck data. The background CMB contribution is subtracted using an ILC method performed locally around the galaxies. The foreground emission from the Milky Way is subtracted. After subtraction, the emission of both galaxies correlates closely with the gas emission of the LMC and SMC. The millimetre excess in the LMC can be explained by CMB fluctuations, but a significant excess is still present in the SMC SED. The Planck and IRIS data at 100 micron are combined to produce thermal dust temperature and optical depth maps of the two galaxies. The LMC temperature map shows the presence of a warm inner arm already found with the Spitzer data, but also shows the existence of a previously unidentified cold outer arm. Several cold regions are found along this arm, some of which are associated with known molecular clouds. The average emissivity spectral index is found to be consistent with beta=1.5 and beta=1.2 below 500 microns for the LMC and SMC respectively, significantly flatter than the values observed in the Milky Way. Furthermore, there is evidence in the SMC for a further flattening of the SED in the sub-mm. The spatial distribution of the millimetre dust excess in the SMC follows the gas and thermal dust distribution. Different models are explored in order to fit the dust emission in the SMC. It is concluded that the millimetre excess is unlikely to be caused by very cold dust emission and that it could be due to a combination of spinning dust. emission and thermal dust emission by more amorphous dust grains than those present in our Galaxy.

astro-ph.CO↗

arXiv2011

Planck Early Results: All sky temperature and dust optical depth from Planck and IRAS: Constraints on the "dark gas" in our galaxy

We construct an all-sky map of the apparent temperature and optical depth of thermal dust emission using the Planck-HFI and IRAS data. The optical depth maps are correlated to tracers of the atomic and molecular gas. The correlation is linear in the lowest column density regions at high galactic latitudes. At high NH, the correlation is consistent with that of the lowest NH. In the intermediate NH range, we observe departure from linearity, with the dust optical depth in excess to the correlation. We attribute this excess emission to thermal emission by dust associated with a Dark-Gas phase, undetected in the available HI and CO measurements. We show the 2D spatial distribution of the Dark-Gas in the solar neighborhood and show that it extends around known molecular regions traced by CO. The average dust emissivity in the HI phase in the solar neighborhood follows roughly a power law distribution with beta = 1.8 all the way down to 3 mm, although the SED flattens slightly in the millimetre. The threshold for the existence of the Dark-Gas is found at NH = (8.0\pm 0.58) 10^{20} Hcm-2. Assuming the same dust emissivity at high frequencies for the dust in the atomic and molecular phases leads to an average XCO = (2.54\pm0.13) 10^{20} H2cm-2/(K km s-1). The mass of Dark-Gas is found to be 28% of the atomic gas and 118% of the CO emitting gas in the solar neighborhood. A possible origin for the Dark-Gas is the existence of a dark molecular phase, where H2 survives photodissociation but CO does not. The observed transition for the onset of this phase in the solar neighborhood (AV = 0.4 mag) appears consistent with recent theoretical predictions. We also discuss the possibility that up to half of the Dark-Gas could be in atomic form, due to optical depth effects in the HI measurements.

astro-ph.GA↗

arXiv2011

Planck Early Results: The submillimetre properties of a sample of Galactic cold clumps

(abridged) We perform a detailed investigation of sources from the Cold Cores Catalogue of Planck Objects (C3PO). Our goal is to probe the reliability of the detections, validate the separation between warm and cold dust emission components, provide the first glimpse at the nature, internal morphology and physical characterictics of the Planck-detected sources. We focus on a sub-sample of ten sources from the C3PO list, selected to sample different environments, from high latitude cirrus to nearby (150pc) and remote (2kpc) molecular complexes. We present Planck surface brightness maps and derive the dust temperature, emissivity spectral index, and column densities of the fields. With the help of higher resolution Herschel and AKARI continuum observations and molecular line data, we investigate the morphology of the sources and the properties of the substructures at scales below the Planck beam size.

astro-ph.GA↗

arXiv2011

Planck early results: first assessment of the High Frequency Instrument in-flight performance

The Planck High Frequency Instrument (HFI) is designed to measure the temperature and polarization anisotropies of the Cosmic Microwave Background and galactic foregrounds in six wide bands centered at 100, 143, 217, 353, 545 and 857 GHz at an angular resolution of 10' (100 GHz), 7' (143 GHz), and 5' (217 GHz and higher). HFI has been operating flawlessly since launch on 14 May 2009. The bolometers cooled to 100 mK as planned. The settings of the readout electronics, such as the bolometer bias current, that optimize HFI's noise performance on orbit are nearly the same as the ones chosen during ground testing. Observations of Mars, Jupiter, and Saturn verified both the optical system and the time response of the detection chains. The optical beams are close to predictions from physical optics modeling. The time response of the detection chains is close to pre-launch measurements. The detectors suffer from an unexpected high flux of cosmic rays related to low solar activity. Due to the redundancy of Planck's observations strategy, the removal of a few percent of data contaminated by glitches does not affect significantly the sensitivity. The cosmic rays heat up significantly the bolometer plate and the modulation on periods of days to months of the heat load creates a common drift of all bolometer signals which do not affect the scientific capabilities. Only the high energy cosmic rays showers induce inhomogeneous heating which is a probable source of low frequency noise.

astro-ph.IM↗

arXiv2011

Planck early results: Cluster Sunyaev-Zeldovich optical scaling relations

We present the Sunyaev-Zeldovich (SZ) signal-to-richness scaling relation (Y500-N200) for the MaxBCG cluster catalogue. Employing a multi-frequency matched filter on the Planck sky maps, we measure the SZ signal for each cluster by adapting the filter according to weak-lensing calibrated mass-richness relations (N200-M500). We bin our individual measurements and detect the SZ signal down to the lowest richness systems (N200=10) with high significance, achieving a detection of the SZ signal in systems with mass as low as M500~5e13 Msolar. The observed Y500-N200 relation is well modeled by a power law over the full richness range. It has a lower normalisation at given N200 than predicted based on X-ray models and published mass-richness relations. An X-ray subsample, however, does conform to the predicted scaling, and model predictions do reproduce the relation between our measured bin-average SZ signal and measured bin-average X-ray luminosities. At fixed richness, we find an intrinsic dispersion in the Y500-N200 relation of 60% rising to of order 100% at low richness. Thanks to its all-sky coverage, Planck provides observations for more than 13,000 MaxBCG clusters and an unprecedented SZ/optical data set, extending the list of known cluster scaling laws to include SZ-optical properties. The data set offers essential clues for models of galaxy formation. Moreover, the lower normalisation of the SZ-mass relation implied by the observed SZ-richness scaling has important consequences for cluster physics and cosmological studies with SZ clusters.

astro-ph.CO↗

arXiv2010

The effect of baryons on the variance and the skewness of the mass distribution in the universe at small scales

We study the dissipative effects of baryon physics on cosmic statistics at small scales using a cosmological simulation of a (50 Mpc/h)^3 volume of the universe. The MareNostrum simulation was performed using the AMR code RAMSES, and includes most of the physical ingredients which are part of the current theory of galaxy formation, such as metal-dependent cooling and UV heating, subgrid modelling of the ISM, star formation and supernova feedback. We re-ran the same initial conditions for a dark matter only universe, as a reference point for baryon-free cosmic statistics. In this paper, we present the measured small-scale amplification of sigma^2 and S_3 due to baryonic physics and their interpretation in the framework of the halo model. As shown in recent studies, the effect of baryons on the matter power spectrum can be accounted for at scales k <~ 10 h/Mpc by modifying the halo concentration parameter. We propose to extend this result by using a halo profile which is a linear combination of a NFW profile for the dark matter and an exponential disk profile mimicking the baryonic component at the heart of the halo. This halo profile form is physically motivated, and depends on two parameters, the mass fraction f_d of baryons in the disk, and the ratio lambda_d of the disk's characteristic scale to the halo's virial radius. We find this composite profile to reproduce both the small-scale variance and skewness boosts measured in the simulation up to k ~ 10^2 h/Mpc for physically meaningful values of the parameters f_d and lambda_d. Although simulations like the one presented here usually suffer from various problems when compared to observations, our modified halo model could be used as a fitting model to improve the determination of cosmological parameters from weak lensing convergence spectra and skewness measurements.

astro-ph.CO↗

arXiv2009

The dusty, albeit ultraviolet bright infancy of galaxies

The largest galaxies acquire their mass early on, when the Universe is still youthful. Cold streams violently feed these young galaxies a vast amount of fresh gas, resulting in very efficient star formation. Using a well resolved hydrodynamical simulation of galaxy formation, we demonstrate that these mammoth galaxies are already in place a couple of billion years after the Big Bang. Contrary to local starforming galaxies, where dust re-emits a large part of the stellar ultraviolet (UV) light at infrared and sub-millimetre wavelengths, our self-consistent modelling of dust extinction predicts that a substantial fraction of UV photons should escape from primordial galaxies. Such a model allows us to compute reliably the number of high redshift objects as a function of luminosity, and yields galaxies whose UV luminosities closely match those measured in the deepest observational surveys available. This agreement is remarkably good considering our admittedly still simple modelling of the interstellar medium (ISM) physics. The luminosity functions (LF) of virtual UV luminous galaxies coincide with the existing data over the whole redshift range from 4 to 7, provided cosmological parameters are set to their currently favoured values. Despite their considerable emission at short wavelengths, we anticipate that the counterparts of the brightest UV galaxies will be detected by future sub-millimetre facilities like ALMA

astro-ph.CO↗

arXiv2009

Building Merger Trees from Cosmological N-body Simulations

Although a fair amount of work has been devoted to growing Monte-Carlo merger trees which resemble those built from an N-body simulation, comparatively little effort has been invested in quantifying the caveats one necessarily encounters when one extracts trees directly from such a simulation. To somewhat revert the tide, this paper seeks to provide its reader with a comprehensive study of the problems one faces when following this route. The first step to building merger histories of dark matter haloes and their subhaloes is to identify these structures in each of the time outputs (snapshots) produced by the simulation. Even though we discuss a particular implementation of such an algorithm (called AdaptaHOP) in this paper, we believe that our results do not depend on the exact details of the implementation but extend to most if not all (sub)structure finders. We then highlight different ways to build merger histories from AdaptaHOP haloes and subhaloes, contrasting their various advantages and drawbacks. We find that the best approach to (sub)halo merging histories is through an analysis that goes back and forth between identification and tree building rather than one which conducts a straightforward sequential treatment of these two steps. This is rooted in the complexity of the merging trees which have to depict an inherently dynamical process from the partial temporal information contained in the collection of instantaneous snapshots available from the N-body simulation.

astro-ph.CO↗

arXiv2009

ASKI: full-sky lensing map making algorithms

Within the context of upcoming full-sky lensing surveys, the edge-preserving non- linear algorithm Aski is presented. Using the framework of Maximum A Posteriori inversion, it aims at recovering the full-sky convergence map from surveys with masks. It proceeds in two steps: CCD images of crowded galactic fields are deblurred using automated edge-preserving deconvolution; once the reduced shear is estimated, the convergence map is also inverted via an edge- preserving method. For the deblurring, it is found that when the observed field is crowded, this gain can be quite significant for realistic ground-based surveys when both positivity and edge-preserving penalties are imposed during the iterative deconvolution. For the convergence inversion, the quality of the reconstruction is investigated on noisy maps derived from the horizon N-body simulation, with and without Galactic cuts, and quantified using one-point statistics, power spectra, cluster counts, peak patches and the skeleton. It is found that the reconstruction is able to interpolate and extrapolate within the Galactic cuts/non-uniform noise; its sharpness-preserving penalization avoids strong biasing near the clusters of the map; it reconstructs well the shape of the PDF as traced by its skewness and kurtosis; the geometry and topology of the reconstructed map is close to the initial map as traced by the peak patch distribution and the skeleton's differential length; the two-points statistics of the recovered map is consistent with the corresponding smoothed version of the initial map; the distribution of point sources is also consistent with the corresponding smoothing, with a significant improvement when edge preserving prior is applied. The contamination of B-modes when realistic Galactic cuts are present is also investigated. Leakage mainly occurs on large scales.

astro-ph.CO↗

arXiv2008

Phase-space structures II: Hierarchical Structure Finder

A new multi-dimensional Hierarchical Structure Finder (HSF) to study the phase-space structure of dark matter in N-body cosmological simulations is presented. The algorithm depends mainly on two parameters, which control the level of connectivity of the detected structures and their significance compared to Poisson noise. By working in 6D phase-space, where contrasts are much more pronounced than in 3D position space, our HSF algorithm is capable of detecting subhaloes including their tidal tails, and can recognise other phase-space structures such as pure streams and candidate caustics. If an additional unbinding criterion is added, the algorithm can be used as a self-consistent halo and subhalo finder. As a test, we apply it to a large halo of the Millennium Simulation, where 19 % of the halo mass are found to belong to bound substructures, which is more than what is detected with conventional 3D substructure finders, and an additional 23-36 % of the total mass belongs to unbound HSF structures. The distribution of identified phase-space density peaks is clearly bimodal: high peaks are dominated by the bound structures and low peaks belong mostly to tidal streams. In order to better understand what HSF provides, we examine the time evolution of structures, based on the merger tree history. Bound structures typically make only up to 6 orbits inside the main halo. Still, HSF can identify at the present time at least 80 % of the original content of structures with a redshift of infall as high as z <= 0.3, which illustrates the significant power of this tool to perform dynamical analyses in phase-space.

astro-ph↗

arXiv2008

The fully connected N-dimensional skeleton: probing the evolution of the cosmic web

A method to compute the full hierarchy of the critical subsets of a density field is presented. It is based on a watershed technique and uses a probability propagation scheme to improve the quality of the segmentation by circumventing the discreteness of the sampling. It can be applied within spaces of arbitrary dimensions and geometry. This recursive segmentation of space yields, for a $d$-dimensional space, a $d-1$ succession of $n$-dimensional subspaces that fully characterize the topology of the density field. The final 1D manifold of the hierarchy is the fully connected network of the primary critical lines of the field : the skeleton. It corresponds to the subset of lines linking maxima to saddle points, and provides a definition of the filaments that compose the cosmic web as a precise physical object, which makes it possible to compute any of its properties such as its length, curvature, connectivity etc... When the skeleton extraction is applied to initial conditions of cosmological N-body simulations and their present day non linear counterparts, it is shown that the time evolution of the cosmic web, as traced by the skeleton, is well accounted for by the Zel'dovich approximation. Comparing this skeleton to the initial skeleton undergoing the Zel'dovich mapping shows that two effects are competing during the formation of the cosmic web: a general dilation of the larger filaments that is captured by a simple deformation of the skeleton of the initial conditions on the one hand, and the shrinking, fusion and disappearance of the more numerous smaller filaments on the other hand. Other applications of the N dimensional skeleton and its peak patch hierarchy are discussed.

astro-ph↗

arXiv2008

The Local Theory of the Cosmic Skeleton

The local theory of the critical lines of 2D and 3D Gaussian fields that underline the cosmic structures is presented. In the context of cosmological matter distribution the subset of critical lines of the 3D density field serves to delineate the skeleton of the observed filamentary structure at large scales. A stiff approximation used to quantitatively describe the filamentary skeleton shows that the flux of the skeleton lines is related to the average Gaussian curvature of the 1D (2D) sections of the field, much in the same way as the density of the peaks. The distribution of the length of the critical lines with threshold is analyzed in detail, while the extended descriptors of the skeleton - its curvature and its singular points, are introduced and briefly described. Theoretical predictions are compared to measurements of the skeleton in realizations of Gaussian random fields in 2D and 3D. It is found that the stiff approximation predicts accurately the shape of the differential length, allows for analytical insight, and explicit closed form solutions. Finally, it provides a simple classification of the singular points of the critical lines: i) critical points; ii) bifurcation points; iii) slopping plateaux.

astro-ph↗

arXiv2008

Phase-space structures I: A comparison of 6D density estimators

This paper reviews and analyses methods used to identify neighbours in 6D space and estimate the corresponding phase-space density. It compares SPH methods to 6D Delaunay tessellation on statical and dynamical realisation of single halo profiles, paying attention to the unknown scaling, S_G, used to relate the spatial dimensions to the velocity dimensions. The methods with local adaptive metric provide the best phase-space estimators. They make use of a Shannon entropy criterion combined with a binary tree partitioning and with SPH interpolation using 10-40 neighbours. Local scaling implemented by such methods, which enforces local isotropy of the distribution function, can vary by about one order of magnitude in different regions within the system. It presents a bimodal distribution, in which one component is dominated by the main part of the halo and the other one is dominated by the substructures. While potentially better than SPH techniques, since it yields an optimal estimate of the local softening volume (and the local number of neighbours required to perform the interpolation), the Delaunay tessellation in fact poorly estimates the phase-space distribution function. Indeed, it requires, the choice of a global scaling S_G. We propose two methods to estimate S_G that yield a good global compromise. However, the Delaunay interpolation still remains quite sensitive to local anisotropies in the distribution. We also compare 6D phase-space density estimation with the proxy, Q=rho/sigma^3, where rho is the local density and 3 sigma^2 is the local 3D velocity dispersion. We show that Q only corresponds to a rough approximation of the true phase-space density, and is not able to capture all the details of the distribution in phase-space, ignoring, in particular, filamentation and tidal streams.

astro-ph↗

arXiv2008

Recovering the topology of the IGM at z~2

We investigate how well the 3D density field of neutral hydrogen in the Intergalactic Medium (IGM) can be reconstructed using the Lyman-alpha absorptions observed along lines of sight to quasars separated by arcmin distances in projection on the sky. We use cosmological hydrodynamical simulations to compare the topologies of different fields: dark matter, gas and neutral hydrogen optical depth and to investigate how well the topology of the IGM can be recovered from the Wiener interpolation method implemented by Pichon et al. (2001). The global statistical and topological properties of the recovered field are analyzed quantitatively through the power-spectrum, the probability distribution function (PDF), the Euler characteristics, its associated critical point counts and the filling factor of underdense regions. The local geometrical properties of the field are analysed using the local skeleton by defining the concept of inter-skeleton distance. At scales larger than ~1.4 , where is the mean separation between lines of sight, the reconstruction accurately recovers the topological features of the large scale density distribution of the gas, in particular the filamentary structures. At scales larger than the intrinsic smoothing length of the inversion procedure, the power spectrum of the recovered HI density field matches well that of the original one and the low order moments of the PDF are well recovered as well as the shape of the Euler characteristic. The integral errors on the PDF and the critical point counts are indeed small, less than 20% for ~2.5 arcmin. The small deviations between the reconstruction and the exact solution mainly reflect departures from the log-normal behaviour that are ascribed to highly non-linear objects in overdense regions.

astro-ph↗

arXiv2007

Observational biases in Lagrangian reconstructions of cosmic velocity fields

Lagrangian reconstruction of large-scale peculiar velocity fields can be strongly affected by observational biases. We develop a thorough analysis of these systematic effects by relying on specially selected mock catalogues. For the purpose of this paper, we use the MAK reconstruction method, although any other Lagrangian reconstruction method should be sensitive to the same problems. We extensively study the uncertainty in the mass-to-light assignment due to luminosity incompleteness, and the poorly-determined relation between mass and luminosity. The impact of redshift distortion corrections is analyzed in the context of MAK and we check the importance of edge and finite-volume effects on the reconstructed velocities. Using three mock catalogues with different average densities, we also study the effect of cosmic variance. In particular, one of them presents the same global features as found in observational catalogues that extend to 80 Mpc/h scales. We give recipes, checked using the aforementioned mock catalogues, to handle these particular observational effects, after having introduced them into the mock catalogues so as to quantitatively mimic the most densely sampled currently available galaxy catalogue of the nearby universe. Once biases have been taken care of, the typical resulting error in reconstructed velocities is typically about a quarter of the overall velocity dispersion, and without significant bias. We finally model our reconstruction errors to propose an improved Bayesian approach to measure Omega_m in an unbiased way by comparing the reconstructed velocities to the measured ones in distance space, even though they may be plagued by large errors. We show that, in the context of observational data, a nearly unbiased estimator of Omega_m may be built using MAK reconstruction.

astro-ph↗

arXiv2007

Using Local Volume data to constrain Dark Matter dynamics

The peculiar velocity reconstruction methods allow one to have a deeper insight into the distribution of dark matter: both to measure mean matter density and to obtain the primordial density fluctuations. We present here the Monge-Ampere-Kantorovitch method applied to mock catalogues mimicking in both redshift and distance catalogues. After having discussed the results obtained for a class of biases that may be corrected for, we focus on the systematics coming from the unknown distribution of unobserved mass and from the statistical relationship between mass and luminosity. We then show how to use these systematics to put constraints on the dark matter distribution. Finally a preliminary application to an extended version (c z < 3000 km/s) of the Neighbour Galaxy Catalogue is presented. We recover the peculiar velocities in our neighbourhood and present a preliminary measurement of the local Omega_M.

astro-ph↗

arXiv2007

The three dimensional skeleton: tracing the filamentary structure of the universe

The skeleton formalism aims at extracting and quantifying the filamentary structure of the universe is generalized to 3D density fields; a numerical method for computating a local approximation of the skeleton is presented and validated here on Gaussian random fields. This method manages to trace well the filamentary structure in 3D fields such as given by numerical simulations of the dark matter distribution on large scales and is insensitive to monotonic biasing. Two of its characteristics, namely its length and differential length, are analyzed for Gaussian random fields. Its differential length per unit normalized density contrast scales like the PDF of the underlying density contrast times the total length times a quadratic Edgeworth correction involving the square of the spectral parameter. The total length scales like the inverse square smoothing length, with a scaling factor given by 0.21 (5.28+ n) where n is the power index of the underlying field. This dependency implies that the total length can be used to constrain the shape of the underlying power spectrum, hence the cosmology. Possible applications of the skeleton to galaxy formation and cosmology are discussed. As an illustration, the orientation of the spin of dark halos and the orientation of the flow near the skeleton is computed for dark matter simulations. The flow is laminar along the filaments, while spins of dark halos within 500 kpc of the skeleton are preferentially orthogonal to the direction of the flow at a level of 25%.

astro-ph↗

arXiv2006

Transverse and longitudinal correlation functions in the Intergalactic Medium from 32 close pairs of high-redshift quasars

We present the transverse flux correlation function of the Lyman-alpha forest in quasar absorption spectra at z~2.1 from VLT-FORS and VLT-UVES observations of a total of 32 pairs of quasars; 26 pairs with separations in the range 0.6<theta<4 arcmin and 6 pairs with 4<theta<10 arcmin. Correlation is detected at the 3sigma level up to separations of the order of ~4 arcmin (or ~4.4 h^{-1} Mpc comoving at z=2.1 for Omega_{m}=0.3 and Omega_{Lambda}=0.7). We have, furthermore, measured the longitudinal correlation function at a somewhat higher mean redshift (z=2.39) from 20 lines of sight observed with high spectral resolution and high signal-to-noise ratio with VLT-UVES. We compare the observed transverse and longitudinal correlation functions to that obtained from numerical simulations and illustrate the effect of spectral resolution, thermal broadening and peculiar motions. The shape and correlation length of the correlation functions are in good agreement with those expected from absorption by the filamentary and sheet-like structures in the photoionized warm intergalactic medium predicted in CDM-like models for structures formation. Using a sample of 139 C_{iv} systems detected along the lines of sight toward the pairs of quasars we also investigate the transverse correlation of metals on the same scales. The observed transverse correlation function of intervening C_{iv} absorption systems is consistent with that of a randomly distributed population of absorbers. This is likely due to the small number of pairs with separation less than 2 arcmin. We detect, however, a significant overdensity of systems in the sightlines towards the quartet Q0103-294A&B, Q0102-2931 and Q0102-293 which extends over the redshift range 1.5<z<2.2 and an angular scale larger than 10 arcmin.

astro-ph↗