arXiv subjects

S. Djordjevic

Publications and source records attributed to S. Djordjevic.

5 recordsLinked to original sources

arXiv2019

The ampere and the electrical units in the quantum era

By fixing two fundamental constants from quantum mechanics, the Planck constant $h$ and the elementary charge $e$, the revised Système International (SI) of units endorses explicitly quantum mechanics. This evolution also highlights the importance of this theory which underpins the most accurate realization of the units. From 20 May 2019, the new definitions of the kilogram and of the ampere, based on fixed values of $h$ and $e$ respectively, will particularly impact the electrical metrology. The Josephson effect (JE) and the quantum Hall effect (QHE), used to maintain voltage and resistance standards with unprecedented reproducibility since 1990, will henceforth provide realizations of the volt and the ohm without the uncertainties inherited from the older electromechanical definitions. More broadly, the revised SI will sustain the exploitation of quantum effects to realize electrical units, to the benefit of end-users. Here, we review the state-of-the-art of these standards and discuss further applications and perspectives.

cond-mat.mes-hall↗

arXiv2016

Practical quantum realization of the ampere from the electron charge

One major change of the future revision of the International System of Units (SI) is a new definition of the ampere based on the elementary charge \emph{e}. Replacing the former definition based on Ampère's force law will allow one to fully benefit from quantum physics to realize the ampere. However, a quantum realization of the ampere from \emph{e}, accurate to within $10^{-8}$ in relative value and fulfilling traceability needs, is still missing despite many efforts have been spent for the development of single-electron tunneling devices. Starting again with Ohm's law, applied here in a quantum circuit combining the quantum Hall resistance and Josephson voltage standards with a superconducting cryogenic amplifier, we report on a practical and universal programmable quantum current generator. We demonstrate that currents generated in the milliampere range are quantized in terms of $ef_\mathrm{J}$ ($f_\mathrm{J}$ is the Josephson frequency) with a measurement uncertainty of $10^{-8}$. This new quantum current source, able to deliver such accurate currents down to the microampere range, can greatly improve the current measurement traceability, as demonstrated with the calibrations of digital ammeters. Beyond, it opens the way to further developments in metrology and in fundamental physics, such as a quantum multimeter or new accurate comparisons to single electron pumps.

physics.ins-det↗

arXiv2014

A programmable quantum current standard from the Josephson and the quantum Hall effects

We propose a way to realize a programmable quantum current standard (PQCS) from the Josephson voltage standard and the quantum Hall resistance standard (QHR) exploiting the multiple connection technique provided by the quantum Hall effect (QHE) and the exactness of the cryogenic current comparator. The PQCS could lead to breakthroughs in electrical metrology like the realization of a programmable quantum current source, a quantum ampere-meter and a simplified closure of the Quantum Metrological Triangle. Moreover, very accurate universality tests of the QHE could be performed by comparing PQCS based on different QHRs.

cond-mat.mes-hall↗

arXiv2013

A hybrid metal/semiconductor electron pump for quantum metrology

Electron pumps capable of delivering a current higher than 100pA with sufficient accuracy are likely to become the direct mise en pratique of the possible new quantum definition of the ampere. Furthermore, they are essential for closing the quantum metrological triangle experiment which tests for possible corrections to the quantum relations linking e and h, the electron charge and the Planck constant, to voltage, resistance and current. We present here single-island hybrid metal/semiconductor transistor pumps which combine the simplicity and efficiency of Coulomb blockade in metals with the unsurpassed performances of silicon switches. Robust and simple pumping at 650MHz and 0.5K is demonstrated. The pumped current obtained over a voltage bias range of 1.4mV corresponds to a relative deviation of 5e-4 from the calculated value, well within the 1.5e-3 uncertainty of the measurement setup. Multi-charge pumping can be performed. The simple design fully integrated in an industrial CMOS process makes it an ideal candidate for national measurement institutes to realize and share a future quantum ampere.

cond-mat.mes-hall↗

arXiv1998

Low temperature penetration depth and the effect of quasi-particle scattering measured by millimeter wave transmission in YBaCuO thin films

Measurement of the penetration depth as a function of temperature using millimeter wave transmission in the range 130-500GHz are reported for three YBCO thin films. The experiment provides the absolute value for the penetration depth at low temperature: the derivation from the transmission data and the experimental uncertainty are discussed. We find a zero temperature penetration depth of 199+/-20nm, 218+/-20nm and 218+/-20nm, for YBCO-50nm/LaAlO3 (pristine), YBCO-130nm/MgO and YBCO-50nm/LaAlO3 (irradiated) respectively. The penetration depth exhibits a different behavior for the three films. In the pristine sample, it shows a clear temperature and frequency dependence, namely the temperature dependence is consistent with a linear variation, whose slope decreases with frequency: this is considered as an evidence for the scattering rate being of the order of the measuring frequency. A two fluids analysis yields 1.7 10^{12} s^{-1}. In the two other samples, the penetration depth does not display any frequency dependence, suggesting a significantly larger scattering rate. The temperature dependence is different in these latter samples. It is consistent with a linear variation for the YBCO/MgO sample, not for the YBCO/LaAlO3 irradiated one, which exhibits a T^2 dependence up to 40K. We have compared our data to the predictions of the d-wave model incorporating resonant scattering and we do not find a satisfactory agreement. However, the large value of the penetration depth at zero Kelvin in the pristine sample is a puzzle and sheds some doubt on a straightforward comparison with the theory of data from thin films, considered as dirty d-wave superconductors.

cond-mat.supr-con↗