arXiv subjects

S. Eguchi

Publications and source records attributed to S. Eguchi.

15 recordsLinked to original sources

arXiv2025

A XRISM/Resolve view of the dynamics in the hot gaseous atmosphere of M87

The XRISM/Resolve microcalorimeter directly measured the gas velocities in the core of the Virgo Cluster, the closest example of AGN feedback in a cluster. This proximity allows us to resolve the kinematic impact of feedback on scales down to 5 kpc. Our spectral analysis reveals a high velocity dispersion of $\sigma_v$=262 (+45 / -38) km/s near the AGN, which steeply declines to ~60 km/s between 5 and 25 kpc in the northwest direction. The observed line-of-sight bulk velocity in all regions is broadly consistent with the central galaxy, M87, with a mild trend toward blueshifted motions at larger radii. Systematic uncertainties have been carefully assessed and do not affect the measurements. The central velocities, if attributed entirely to isotropic turbulence, correspond to a transonic ICM at sub-6 kpc scales with three-dimensional Mach number 0.69 (+0.14 / -0.11) and a non-thermal pressure fraction of 21 (+7 / -5)%. Simple models of weak shocks and sound waves and calculations assuming isotropic turbulence both support the hypothesis that the velocity field reflects a mix of shock-driven expansion and turbulence. Compared to other clusters observed by XRISM to date, M87's central region stands out as the most kinematically disturbed, exhibiting both the highest velocity dispersion and the largest 3D Mach number, concentrated at the smallest physical scales.

astro-ph.GA↗

arXiv2025

The unusual spectrum of the X-ray transient source XRISM J174610.8-290021 near the Galactic center

The Galactic center region was observed with the XRISM X-ray observatory during the performance verification phase in 2024 and a point-like X-ray source was detected with the X-ray imager Xtend at a position of (RA, Dec)=(17h46m10.8s, -29{\deg}00'21''), which is thus named XRISM J174610.8-290021. This source was bright in February to March and showed time variations in count rate by more than one order of magnitude in one week. The 2-10 keV X-ray luminosity was ~$10^{35}$ erg/s for the assumed distance of 8 kpc. However, after six months, it was below the detection limit. We found a hint of periodicity of 1537 s from timing analysis. The XRISM/Xtend spectrum has emission lines from helium-like iron (Fe He$\alpha$) at 6.7 keV and hydrogen-like iron (Fe Ly$\alpha$) at 6.97 keV; their intensity ratio is unusual with the latter being four times stronger than the former. If the emission is of thermal origin, the ionization temperature estimated from the iron-line intensity ratio is ~30 keV, which is inconsistent with the electron temperature estimated from the thermal bremsstrahlung, ~7 keV. Spectral models of magnetic cataclysmic variables, which are often seen in the Galactic center in this luminosity range, are found to fail to reproduce the obtained spectrum. By contrast, we found that the spectrum is well reproduced with the models of low-mass X-ray binaries containing a neutron star plus two narrow Gaussian lines. We consider that the source is intrinsically bright reaching $10^{37}$ erg/s, but is blocked from direct view due to a high inclination and only the scattered emission is visible. The photoionized plasma above the accretion disk with an ionization parameter of ~$10^{5}$ may explain the unusual iron line ratio. We further discuss the potential contribution of point sources of the type of XRISM J174610.8-290021 to the diffuse Galactic center X-ray emission.

astro-ph.HE↗

arXiv2022

Input optics systems of the KAGRA detector during O3GK

KAGRA, the underground and cryogenic gravitational-wave detector, was operated for its solo observation from February 25th to March 10th, 2020, and its first joint observation with the GEO 600 detector from April 7th -- 21st, 2020 (O3GK). This study presents an overview of the input optics systems of the KAGRA detector, which consist of various optical systems, such as a laser source, its intensity and frequency stabilization systems, modulators, a Faraday isolator, mode-matching telescopes, and a high-power beam dump. These optics were successfully delivered to the KAGRA interferometer and operated stably during the observations. The laser frequency noise was observed to limit the detector sensitivity above a few kHz, whereas the laser intensity did not significantly limit the detector sensitivity.

gr-qc↗

arXiv2022

Noise subtraction from KAGRA O3GK data using Independent Component Analysis

In April 2020, KAGRA conducted its first science observation in combination with the GEO~600 detector (O3GK) for two weeks. According to the noise budget estimation, suspension control noise in the low frequency band and acoustic noise in the middle frequency band are identified as the dominant contribution. In this study, we show that such noise can be reduced in offline data analysis by utilizing a method called Independent Component Analysis (ICA). Here the ICA model is extended from the one studied in iKAGRA data analysis by incorporating frequency dependence while linearity and stationarity of the couplings are still assumed. By using optimal witness sensors, those two dominant contributions are mitigated in the real observational data. We also analyze the stability of the transfer functions for whole two weeks data in order to investigate how the current subtraction method can be practically used in gravitational wave search.

astro-ph.IM↗

arXiv2022

Performance of the KAGRA detector during the first joint observation with GEO 600 (O3GK)

KAGRA, the kilometer-scale underground gravitational-wave detector, is located at Kamioka, Japan. In April 2020, an astrophysics observation was performed at the KAGRA detector in combination with the GEO 600 detector; this observation operation is called O3GK. The optical configuration in O3GK is based on a power recycled Fabry-P\'{e}rot Michelson interferometer; all the mirrors were set at room temperature. The duty factor of the operation was approximately 53%, and the strain sensitivity was $3\times10^{-22}~/\sqrt{\rm{Hz}}$ at 250 Hz. In addition, the binary-neutron-star (BNS) inspiral range was approximately 0.6 Mpc. The contributions of various noise sources to the sensitivity of O3GK were investigated to understand how the observation range could be improved; this study is called a "noise budget". According to our noise budget, the measured sensitivity could be approximated by adding up the effect of each noise. The sensitivity was dominated by noise from the sensors used for local controls of the vibration isolation systems, acoustic noise, shot noise, and laser frequency noise. Further, other noise sources that did not limit the sensitivity were investigated. This paper provides a detailed account of the KAGRA detector in O3GK including interferometer configuration, status, and noise budget. In addition, strategies for future sensitivity improvements such as hardware upgrades, are discussed.

astro-ph.IM↗

arXiv2021

Overview of KAGRA: Calibration, detector characterization, physical environmental monitors, and the geophysics interferometer

KAGRA is a newly built gravitational wave observatory, a laser interferometer with a 3 km arm length, located in Kamioka, Gifu, Japan. In this series of articles, we present an overview of the baseline KAGRA, for which we finished installing the designed configuration in 2019. This article describes the method of calibration (CAL) used for reconstructing gravitational wave signals from the detector outputs, as well as the characterization of the detector (DET). We also review the physical environmental monitors (PEM) system and the geophysics interferometer (GIF). Both are used for characterizing and evaluating the data quality of the gravitational wave channel. They play important roles in utilizing the detector output for gravitational wave searches. These characterization investigations will be even more important in the near future, once gravitational wave detection has been achieved, and in using KAGRA in the gravitational wave astronomy era.

gr-qc↗

arXiv2020

Overview of KAGRA : KAGRA science

KAGRA is a newly build gravitational-wave observatory, a laser interferometer with 3 km arm length, located in Kamioka, Gifu, Japan. In this paper in the series of KAGRA-featured articles, we discuss the science targets of KAGRA projects, considering not only the baseline KAGRA (current design) but also its future upgrade candidates (KAGRA+) for the near to middle term (~5 years).

gr-qc↗

arXiv2020

Overview of KAGRA: Detector design and construction history

KAGRA is a newly built gravitational-wave telescope, a laser interferometer comprising arms with a length of 3\,km, located in Kamioka, Gifu, Japan. KAGRA was constructed under the ground and it is operated using cryogenic mirrors that help in reducing the seismic and thermal noise. Both technologies are expected to provide directions for the future of gravitational-wave telescopes. In 2019, KAGRA finished all installations with the designed configuration, which we call the baseline KAGRA. In this occasion, we present an overview of the baseline KAGRA from various viewpoints in a series of of articles. In this article, we introduce the design configurations of KAGRA with its historical background.

physics.ins-det↗

arXiv2020

Application of the independent component analysis to the iKAGRA data

We apply the independent component analysis (ICA) to the real data from a gravitational wave detector for the first time. Specifically we use the iKAGRA data taken in April 2016, and calculate the correlations between the gravitational wave strain channel and 35 physical environmental channels. Using a couple of seismic channels which are found to be strongly correlated with the strain, we perform ICA. Injecting a sinusoidal continuous signal in the strain channel, we find that ICA recovers correct parameters with enhanced signal-to-noise ratio, which demonstrates usefulness of this method. Among the two implementations of ICA used here, we find the correlation method yields the optimal result for the case environmental noises act on the strain channel linearly.

astro-ph.IM↗

arXiv2019

An arm length stabilization system for KAGRA and future gravitational-wave detectors

Modern ground-based gravitational wave (GW) detectors require a complex interferometer configuration with multiple coupled optical cavities. Since achieving the resonances of the arm cavities is the most challenging among the lock acquisition processes, the scheme called arm length stabilization (ALS) had been employed for lock acquisition of the arm cavities. We designed a new type of the ALS, which is compatible with the interferometers having long arms like the next generation GW detectors. The features of the new ALS are that the control configuration is simpler than those of previous ones and that it is not necessary to lay optical fibers for the ALS along the kilometer-long arms of the detector. Along with simulations of its noise performance, an experimental test of the new ALS was performed utilizing a single arm cavity of KAGRA. This paper presents the first results of the test where we demonstrated that lock acquisition of the arm cavity was achieved using the new ALS and residual noise was measured to be $8.2\,\mathrm{Hz}$ in units of frequency, which is smaller than the linewidth of the arm cavity and thus low enough to lock the full interferometer of KAGRA in a repeatable and reliable manner.

physics.ins-det↗

arXiv2018

An introduction to FITSWebQL

The JVO ALMA WebQL web service - available through the JVO ALMA FITS archive - has been upgraded to include legacy data from other telescopes, for example Nobeyama NRO45M in Japan. The updated server software has been renamed FITSWebQL. In addition, a standalone desktop version supporting Linux, macOS and Windows 10 Linux Subsystem (Bash on Windows) is also available for download from http://jvo.nao.ac.jp/~chris/ . The FITSWebQL server enables viewing of even 100GB-large FITS files in a web browser running on a PC with a limited amount of RAM. Users can interactively zoom-in to selected areas of interest with the corresponding frequency spectrum being calculated on the server in near real-time. The client (a browser) is a JavaScript application built on WebSockets, HTML5, WebGL and SVG. There are many challenges when providing a web browser-based real-time FITS data cube preview service over high-latency low-bandwidth network connections. The upgraded version tries to overcome the latency issue by predicting user mouse movements with a Kalman Filter in order to speculatively deliver the real-time spectrum data at a point where the user is likely to be looking at. The new version also allows one to view multiple FITS files simultaneously in an RGB composite mode (NRO45M FUGIN only), where each dataset is assigned one RGB channel to form a colour image. Spectra from multiple FITS cubes are shown together too. The paper briefly describes main features of FITSWebQL. We also touch on some of the recent developments, such as an experimental switch from C/C++ to Rust (see https://www.rust-lang.org/) for improved stability, better memory management and fearless concurrency, or attempts to display FITS data cubes in the form of interactive on-demand video streams in a web browser.

astro-ph.IM↗

arXiv2005

Multiple Outbursts of a Cataclysmic Variable in the Globular Cluster M22

We present a 4 year light curve of a cataclysmic variable in M22, based on an analysis of accumulated data from the MOA microlensing survey. The position of the star coincides with that of a transient event observed by HST in 1999, originally attributed to microlensing but later suspected to be a dwarf nova outburst. Two outburst episodes, one in 2002 and one in 2003, with $ΔI\sim3$ are seen in the MOA data thus confirming that the HST event was a dwarf nova outburst. The MOA and HST data show that this dwarf nova underwent at least three outburst episodes during 1999--2004. Further close monitoring of this event is encouraged as future outburst episodes are expected.

astro-ph↗

arXiv2004

Search for Low-Mass Exoplanets by Gravitational Microlensing at High Magnification

Observations of the gravitational microlensing event MOA 2003-BLG-32/OGLE 2003-BLG-219 are presented for which the peak magnification was over 500, the highest yet reported. Continuous observations around the peak enabled a sensitive search for planets orbiting the lens star. No planets were detected. Planets 1.3 times heavier than Earth were excluded from more than 50 % of the projected annular region from approximately 2.3 to 3.6 astronomical units surrounding the lens star, Uranus-mass planets from 0.9 to 8.7 astronomical units, and planets 1.3 times heavier than Saturn from 0.2 to 60 astronomical units. These are the largest regions of sensitivity yet achieved in searches for extrasolar planets orbiting any star.

astro-ph↗

arXiv2004

OGLE 2003-BLG-235/MOA 2003-BLG-53: A planetary microlensing event

We present observations of the unusual microlensing event OGLE 2003-BLG-235/MOA 2003-BLG-53. In this event a short duration (~7 days) low amplitude deviation in the light curve due a single lens profile was observed in both the MOA and OGLE survey observations. We find that the observed features of the light curve can only be reproduced using a binary microlensing model with an extreme (planetary) mass ratio of 0.0039 +/- (11, 07) for the lensing system. If the lens system comprises a main sequence primary, we infer that the secondary is a planet of about 1.5 Jupiter masses with an orbital radius of ~3 AU.

astro-ph↗

arXiv2004

MOA 2003-BLG-37: A Bulge Jerk-Parallax Microlens Degeneracy

We analyze the Galactic bulge microlensing event MOA-2003-BLG-37. Although the Einstein timescale is relatively short, t_e=43 days, the lightcurve displays deviations consistent with parallax effects due to the Earth's accelerated motion. We show that the chi^2 surface has four distinct local minima that are induced by the ``jerk-parallax'' degeneracy, with pairs of solutions having projected Einstein radii, \tilde r_e = 1.76 AU and 1.28 AU, respectively. This is the second event displaying such a degeneracy and the first toward the Galactic bulge. For both events, the jerk-parallax formalism accurately describes the offsets between the different solutions, giving hope that when extra solutions exist in future events, they can easily be found. However, the morphologies of the chi^2 surfaces for the two events are quite different, implying that much remains to be understood about this degeneracy.

astro-ph↗