Searcharxiv⌕ Search

arXiv subjects

S. Fujii

Publications and source records attributed to S. Fujii.

At least 19 recordsLinked to original sources
arXiv2026

Trion transfer in mixed-dimensional heterostructures

Charged excitons, or trions, offering unique spin and charge degrees of freedom, have primarily been investigated in doped systems where charges are long considered indispensable. Here, we present an alternative route to ultra-efficient trion emission from an intrinsic, defect-free semiconductor via a transfer mechanism. By exciting trions in two-dimensional tungsten-diselenide donors and transferring them into one-dimensional carbon-nanotube acceptors in mixed-dimensional heterostructures, we circumvent the usual carrier requirement, overcoming intrinsic Auger-quenching limitations. Benefitting from a reservoir effect induced by dimensional heterogeneity, this process achieves trion emission efficiencies increased by over 100-fold compared to conventional doping-based approaches, and remains robust across diverse doping conditions. Our findings extend the exciton transfer paradigm to the three-body quasiparticles, offering a new platform for advancing excitonic physics and trion-based optoelectronic/spintronic applications.

cond-mat.mes-hall↗
arXiv2025

Decadal upgrade strategy for KAGRA toward post-O5 gravitational-wave astronomy

The KAGRA Collaboration has investigated a ten-year upgrade strategy for the KAGRA gravitational wave detector, considering a total of 14 upgrade options that vary in mirror mass, quantum noise reduction techniques, and the quality of cryogenic suspensions. We evaluated the scientific potential of these configurations with a focus on key targets such as parameter estimation of compact binary coalescences, binary neutron star post-merger signals, and continuous gravitational waves. Rather than aiming to improve all science cases uniformly, we prioritized those most sensitive to the detector configuration. Technical feasibility was assessed based on required hardware developments, associated R\&D efforts, cost, and risk. Our study finds that a high-frequency upgrade plan that enhances sensitivity over a broad frequency range above ~200 Hz offers the best balance between scientific return and technical feasibility. Such an upgrade would enable sky localization of binary neutron star mergers at 100 Mpc to better than 0.5 deg$^2$ in a LIGO-Virgo-KAGRA network, and improve the measurement precision of tidal deformability parameter by approximately 10% at median, compared to a network without KAGRA.

gr-qc↗
arXiv2025

Dielectric environment engineering via 2D material heterostructure formation on hybrid photonic crystal nanocavity

Hybrid integration of two-dimensional (2D) materials with nanophotonic platforms has enabled compact optoelectronic devices by leveraging the unique optical and electronic properties of atomically thin layers. While most efforts have focused on coupling 2D materials to pre-defined photonic structures, the broader potential of 2D heterostructures for actively engineering the photonic environment remains largely unexplored. In our previous work, we employed single types of 2D material and showed that even monolayer flakes can locally induce high-$Q$ nanocavities in photonic crystal (PhC) waveguides through effective refractive index modulation. Here, we extend this concept by demonstrating that further transferring of 2D material flakes onto the induced hybrid nanocavity to form heterostructures enable more flexibility for post-fabrication dielectric environment engineering of the cavity. We show that the high-$Q$ hybrid nanocavities remain robust under sequential flake stacking. Coupling optically active MoTe$_{2}$ flake to these cavities yields enhanced photoluminescence and reduced emission lifetimes, consistent with Purcell-enhanced light-matter interactions. Additionally, encapsulation with a top hBN layer leads to a significant increase in the cavity $Q$ factor, in agreement with numerical simulations. Our results show that these heterostructure stacks not only preserve the cavity quality but also introduce an additional degrees of control -- via flake thickness, refractive indices, size and interface design -- offering a richer dielectric environment modulation landscape than what is achievable with monolayers alone, providing a versatile method toward scalable and reconfigurable hybrid nanophotonic systems.

physics.optics↗
arXiv2025

Identification of Noise-Associated Glitches in KAGRA O3GK with Hveto

Transient noise ("glitches") in gravitational wave detectors can mimic or obscure true signals, significantly reducing detection sensitivity. Identifying and excluding glitch-contaminated data segments is therefore crucial for enhancing the performance of gravitational-wave searches. We perform a noise analysis of the KAGRA data obtained during the O3GK observation. Our analysis is performed with hierarchical veto (Hveto) which identifies noises based on the statistical time correlation between the main channel and the auxiliary channels. A total of 2,531 noises were vetoed by 28 auxiliary channels with the configuration (i.e., signal-to-noise threshold set to 8) that we chose for Hveto. We identify vetoed events as glitches on the spectrogram via visual examination after plotting them with Q-transformation. By referring to the Gravity Spy project, we categorize 2,354 glitches into six types: blip, helix, scratchy, and scattered light, which correspond to those listed in Gravity Spy, and dot and line, which are not found in the Gravity Spy classification and are thus named based on their spectrogram morphology in KAGRA data. The remaining 177 glitches are determined not to belong to any of these six types. We show how the KAGRA glitch types are related to each subsystem of KAGRA. To investigate the possible correlation between the main channel and the round winner - an auxiliary channel statistically associated with the main channel for vetoing purposes - we visually examine the similarity or difference in the glitch pattern on the spectrogram. We compare the qualitative correlation found through visual examination with coherence, which is known to provide quantitative measurement for the correlation between the main channel and each auxiliary channel. Our comprehensive noise analysis will help improve the data quality of KAGRA by applying it to future KAGRA observation data.

gr-qc↗
arXiv2023

Self-aligned hybrid nanocavities using atomically thin materials

Two-dimensional (2D) van der Waals layered materials with intriguing properties are increasingly being adopted in hybrid photonics. The 2D materials are often integrated with photonic structures including cavities to enhance light-matter coupling, providing additional control and functionality. The 2D materials, however, needs to be precisely placed on the photonic cavities. Furthermore, the transfer of 2D materials onto the cavities could degrade the cavity quality $(Q)$ factor. Instead of using prefabricated PhC nanocavities, we demonstrate a novel approach to form a hybrid nanocavity by partially covering a PhC waveguide post-fabrication with a suitably-sized 2D material flake. We successfully fabricated such hybrid nanocavity devices with hBN, WSe$_2$ and MoTe$_2$ flakes on silicon PhC waveguides, obtaining $Q$ factors as high as $4.0\times10^5$. Remarkably, even mono- and few-layer flakes can provide sufficient local refractive index modulation to induce nanocavity formation. Since the 2D material is spatially self-aligned to the nanocavity, we have also managed to observe cavity PL enhancement in a MoTe$_2$ hybrid cavity device, with a cavity Purcell enhancement factor of about 15. Our results highlights the prospect of using such 2D materials-induced PhC nanocavity to realize a wide range of photonic components for hybrid devices and integrated photonic circuits.

physics.optics↗
arXiv2023

Room-temperature quantum emission from interface excitons in mixed-dimensional heterostructures

The development of van der Waals heterostructures has introduced unconventional phenomena that emerge at atomically precise interfaces. For example, interlayer excitons in two-dimensional transition metal dichalcogenides show intriguing optical properties at low temperatures. Here we report on room-temperature observation of interface excitons in mixed-dimensional heterostructures consisting of two-dimensional tungsten diselenide and one-dimensional carbon nanotubes. Bright emission peaks originating from the interface are identified, spanning a broad energy range within the telecommunication wavelengths. The effect of band alignment is investigated by systematically varying the nanotube bandgap, and we assign the new peaks to interface excitons as they only appear in type-II heterostructures. Room-temperature localization of low-energy interface excitons is indicated by extended lifetimes as well as small excitation saturation powers, and photon correlation measurements confirm single-photon emission. With mixed-dimensional van der Waals heterostructures where band alignment can be engineered, new opportunities for quantum photonics are envisioned.

cond-mat.mes-hall↗
arXiv2023

Resonant exciton transfer in mixed-dimensional heterostructures for overcoming dimensional restrictions in optical processes

Nanomaterials exhibit unique optical phenomena, in particular excitonic quantum processes occurring at room temperature. The low dimensionality, however, imposes strict requirements for conventional optical excitation, and an approach for bypassing such restrictions is desirable. Here we report on exciton transfer in carbon-nanotube/tungsten-diselenide heterostructures, where band alignment can be systematically varied. The mixed-dimensional heterostructures display a pronounced exciton reservoir effect where the longer-lifetime excitons within the two-dimensional semiconductor are funneled into carbon nanotubes through diffusion. This new excitation pathway presents several advantages, including larger absorption areas, broadband spectral response, and polarization-independent efficiency. When band alignment is resonant, we observe substantially more efficient excitation via tungsten diselenide compared to direct excitation of the nanotube. We further demonstrate simultaneous bright emission from an array of carbon nanotubes with varied chiralities and orientations. Our findings show the potential of mixed-dimensional heterostructures and band alignment engineering for energy harvesting and quantum applications through exciton manipulation.

cond-mat.mes-hall↗
arXiv2022

Quantization of mode shifts in nanocavities integrated with atomically thin sheets

The unique optical properties of two-dimensional layered materials are attractive for achieving increased functionality in integrated photonics. Owing to the van der Waals nature, these materials are ideal for integrating with nanoscale photonic structures. Here we report on carefully designed air-mode silicon photonic crystal nanobeam cavities for efficient control through two-dimensional materials. By systematically investigating various types and thickness of two-dimensional materials, we are able to show that enhanced responsivity allows for giant shifts of the resonant wavelength. With atomically precise thickness over a macroscopic area, few-layer flakes give rise to quantization of the mode shifts. We extract the dielectric constant of the flakes and find that it is independent of the layer number down to a monolayer. Flexible reconfiguration of a cavity is demonstrated by stacking and removing ultrathin flakes. With an unconventional cavity design, our results open up new possibilities for photonic devices integrated with two-dimensional materials.

physics.optics↗
arXiv2011

Elasticity of smectic liquid crystals with focal conic domains

We study the elastic properties of thermotropic smectic liquid crystals with focal conic domains (FCDs). After the application of the controlled preshear at different temperatures, we independently measured the shear modulus G' and the FCD size L. We find out that these quantities are related by the scaling relation G' ~ γ_{eff}/L where γ_{eff} is the effective surface tension of the FCDs. The experimentally obtained value of γ_{\rm eff} shows the same scaling as the effective surface tension of the layered systems \sqrt{KB} where K and B are the bending modulus and the layer compression modulus, respectively. The similarity of this scaling relation to that of the surfactant onion phase suggests an universal rheological behavior of the layered systems with defects.

cond-mat.soft↗
arXiv2010

Graphical Method for Effective Interaction with a New Vertex Function

Introducing a new vertex function, Z(E), of an energy variable E, we derive a new equation for the effective interaction. The equation is obtained by replacing the Q-box in the Krenciglowa-Kuo (KK) method by Z(E). This new approach can be viewed as an extension of the KK method. We show that this equation can be solved both in iterative and non-iterative ways. We observe that the iteration procedure with Z(E) brings about fast convergence compared to the usual KK method. It is shown that, as in the KK approach, the procedure of calculating the effective interaction can be reduced to determining the true eigenvalues of the original Hamiltonian H and they can be obtained as the positions of intersections of graphs generated from Z(E). We find that this graphical method yields always precise results and reproduces any of the true eigenvalues of H. The calculation in the present approach can be made regardless of overlaps with the model space and energy differences between unperturbed energies and the eigenvalues of H. We find also that Z(E) is a well-behaved function of E and has no singularity. These characteristics of the present approach ensure stability in actual calculations and would be helpful to resolve some difficulties due to the presence of poles in the Q-box. Performing test calculations we verify numerically theoretical predictions made in the present approach.

nucl-th↗
arXiv2010

A new solution for effective interaction

A new method is given for the model-space effective interaction. Introducing a new operator in place of the Q-box in the Krenciglowa-Kuo (KK) method, we derive a new equation for the effective interaction. This equation can be viewed as an extension of the KK method. We show that this equation can be solved both in iterative and non-iterative ways. We observe that the iteration procedure brings about fast acceleration of convergence compared to the KK approach. We also find that the non-iterative calculation reproduces successfully any set of the true eigenvalues of the original Hamiltonian. This non-iterative calculation can be made regardless of the magnitudes of the overlaps with the model space and the energy differences between the unperturbed energy and the eigenvalues to be solved.

nucl-th↗
arXiv2009

Ground-state and single-particle energies of nuclei around ^{16}O, ^{40}Ca, and ^{56}Ni from realistic nucleon-nucleon forces

We perform ab initio calculations for nuclei around ^{16}O, ^{40}Ca, and ^{56}Ni using realistic nucleon-nucleon forces. In particular, ^{56}Ni is computed as the heaviest nucleus in this kind of ab initio calculation. Ground-state and single-particle energies including three-body-cluster effects are obtained within the framework of the unitary-model-operator approach. It is shown that the CD-Bonn nucleon-nucleon potential gives quite good results close to the experimental values for all nuclei in the present work.

nucl-th↗
arXiv2009

Ab initio shell-model calculation for ^{18}O in a restricted no-core model space

We perform an ab initio shell-model calculation for ^{18}O in a restricted no-core model space, microscopically deriving a two-body effective interaction and introducing a minimal refinement of one-body energies in the spsd or spsdpf model space. Low-lying energy levels, except for the experimental 0_{2}^{+} and 2_{3}^{+} states, are better described in the spsdpf space than in the spsd space. The structure of low-lying energy levels is discussed with an emphasis on many-particle many-hole states beyond the four-particle two-hole configuration.

nucl-th↗
arXiv2007

Microscopic shell-model description of the exotic nucleus ^{16}C

The structure of the neutron-rich carbon nucleus ^{16}C is described by introducing a new microscopic shell model of no-core type. The model space is composed of the 0s, 0p, 1s0d, and 1p0f shells. The effective interaction is microscopically derived from the CD-Bonn potential and the Coulomb force through a unitary transformation theory. Calculated low-lying energy levels of ^{16}C agree well with the experiment. The B(E2;2_{1}^{+} \to 0_{1}^{+}) value is calculated with the bare charges. The anomalously hindered B(E2) value for ^{16}C, measured recently, is well reproduced.

nucl-th↗
arXiv2006

Separability of a Low-Momentum Effective Nucleon-Nucleon Potential

A realistic nucleon-nucleon potential is transformed into a low-momentum effective one (LMNN) using the Okubo theory. The separable potentials are converted from the LMNN with a universal separable expansion method and a simple Legendre expansion. Through the calculation of the triton binding energies, the separability for the convergence of these ranks is evaluated. It is found that there is a tendency for the lower momentum cutoff parameter $Λ$ of LMNN to gain good separability.

nucl-th↗
arXiv2005

The unitary-model-operator approach to nuclear many-body problems

Microscopic nuclear structure calculations have been performed within the framework of the unitary-model-operator approach. Ground-state and single-particle energies are calculated for nuclei around ^{14}C, ^{16}O and ^{40}Ca with modern nucleon-nucleon interactions.

nucl-th↗
arXiv2004

Dependence of Nuclear Binding Energies on the Cutoff Momentum of Low-Momentum Nucleon-Nucleon Interaction

Binding energies of ^{3}H, ^{4}He, and ^{16}O are calculated, using low-momentum nucleon-nucleon interactions (V_{low-k}) for a wide range of the cutoff momentum Λ. In addition, single-particle energies in nuclei around ^{16}O are computed. The dependence of the binding energies and the single-particle energies in these nuclei on the cutoff momentum Λof the V_{low-k} is examined. Furthermore, the availability of the V_{low-k} in nuclear structure calculations is discussed.

nucl-th↗