Searcharxiv⌕ Search

arXiv subjects

S. George

Publications and source records attributed to S. George.

28 records · Page 2Linked to original sources
arXiv2008

TRIGA-SPEC: A setup for mass spectrometry and laser spectroscopy at the research reactor TRIGA Mainz

The research reactor TRIGA Mainz is an ideal facility to provide neutron-rich nuclides with production rates sufficiently large for mass spectrometric and laser spectroscopic studies. Within the TRIGA-SPEC project, a Penning trap as well as a beam line for collinear laser spectroscopy are being installed. Several new developments will ensure high sensitivity of the trap setup enabling mass measurements even on a single ion. Besides neutron-rich fission products produced in the reactor, also heavy nuclides such as 235-U or 252-Cf can be investigated for the first time with an off-line ion source. The data provided by the mass measurements will be of interest for astrophysical calculations on the rapid neutron-capture process as well as for tests of mass models in the heavy-mass region. The laser spectroscopic measurements will yield model-independent information on nuclear ground-state properties such as nuclear moments and charge radii of neutron-rich nuclei of refractory elements far from stability. This publication describes the experimental setup as well as its present status.

nucl-ex↗
arXiv2008

Electric and magnetic field optimization procedure for Penning trap mass spectrometers

Significant systematic errors in high-precision Penning trap mass spectrometry can result from electric and magnetic field imperfections. An experimental procedure to minimize these uncertainties is presented for the on-line Penning trap mass spectrometer ISOLTRAP, located at ISOLDE/CERN. The deviations from the ideal magnetic and electric fields are probed by measuring the cyclotron frequency and the reduced cyclotron frequency, respectively, of stored ions as a function of the time between the ejection of ions from the preparation trap and their capture in the precision trap, which influences the energy of their axial motion. The correction parameters are adjusted to minimize the frequency shifts.

physics.ins-det↗
arXiv2008

Time-separated oscillatory fields for high-precision mass measurements on short-lived Al and Ca nuclides

High-precision Penning trap mass measurements on the stable nuclide 27Al as well as on the short-lived radionuclides 26Al and 38,39Ca have been performed by use of radiofrequency excitation with time-separated oscillatory fields, i.e. Ramsey's method, as recently introduced for the excitation of the ion motion in a Penning trap, was applied. A comparison with the conventional method of a single continuous excitation demonstrates its advantage of up to ten times shorter measurements. The new mass values of 26,27Al clarify conflicting data in this specific mass region. In addition, the resulting mass values of the superallowed beta-emitter 38Ca as well as of the groundstate of the beta-emitter 26Al m confirm previous measurements and corresponding theoretical corrections of the ft-values.

nucl-ex↗
arXiv2007

Evidence for a breakdown of the Isobaric Multiplet Mass Equation: A study of the A=35, T=3/2 isospin quartet

Mass measurements on radionuclides along the potassium isotope chain have been performed with the ISOLTRAP Penning trap mass spectrometer. For 35K T1/2=178ms) to 46K (T1/2=105s) relative mass uncertainties of 2x10-8 and better have been achieved. The accurate mass determination of 35K (dm=0.54keV) has been exploited to test the Isobaric Multiplet Mass Equation (IMME) for the A=35, T=3/2 isospinquartet. The experimental results indicate a deviation from the generally adopted quadratic form.

nucl-ex↗
arXiv2007

The Ramsey method in high-precision mass spectrometry with Penning traps: Experimental results

The highest precision in direct mass measurements is obtained with Penning trap mass spectrometry. Most experiments use the interconversion of the magnetron and cyclotron motional modes of the stored ion due to excitation by external radiofrequency-quadrupole fields. In this work a new excitation scheme, Ramsey's method of time-separated oscillatory fields, has been successfully tested. It has been shown to reduce significantly the uncertainty in the determination of the cyclotron frequency and thus of the ion mass of interest. The theoretical description of the ion motion excited with Ramsey's method in a Penning trap and subsequently the calculation of the resonance line shapes for different excitation times, pulse structures, and detunings of the quadrupole field has been carried out in a quantum mechanical framework and is discussed in detail in the preceding article in this journal by M. Kretzschmar. Here, the new excitation technique has been applied with the ISOLTRAP mass spectrometer at ISOLDE/CERN for mass measurements on stable as well as short-lived nuclides. The experimental resonances are in agreement with the theoretical predictions and a precision gain close to a factor of four was achieved compared to the use of the conventional excitation technique.

physics.atom-ph↗
arXiv2007

Separated Oscillatory Fields for High-Precision Penning Trap Mass Spectrometry

Ramsey's method of separated oscillatory fields is applied to the excitation of the cyclotron motion of short-lived ions in a Penning trap to improve the precision of their measured mass. The theoretical description of the extracted ion-cyclotron-resonance line shape is derived out and its correctness demonstrated experimentally by measuring the mass of the short-lived $^{38}$Ca nuclide with an uncertainty of $1.6\cdot 10^{-8}$ using the ISOLTRAP Penning trap mass spectrometer at CERN. The mass value of the superallowed beta-emitter $^{38}$Ca is an important contribution for testing the conserved-vector-current hypothesis of the electroweak interaction. It is shown that the Ramsey method applied to mass measurements yields a statistical uncertainty similar to that obtained by the conventional technique ten times faster.

nucl-ex↗
arXiv2003

The Algorithm Steering and Trigger Decision mechanism of the ATLAS High Level Trigger

Given the extremely high output rate foreseen at LHC and the general-purpose nature of ATLAS experiment, an efficient and flexible way to select events in the High Level Trigger is needed. An extremely flexible solution is proposed that allows for early rejection of unwanted events and an easily configurable way to choose algorithms and to specify the criteria for trigger decisions. It is implemented in the standard ATLAS object-oriented software framework, Athena. The early rejection is achieved by breaking the decision process down into sequential steps. The configuration of each step defines sequences of algorithms which should be used to process the data, and 'trigger menus' that define which physics signatures must be satisfied to continue on to the next step, and ultimately to accept the event. A navigation system has been built on top of the standard Athena transient store (StoreGate) to link the event data together in a tree-like structure. This is fundamental to the seeding mechanism, by which data from one step is presented to the next. The design makes it straightforward to utilize existing off-line reconstruction data classes and algorithms when they are suitable

hep-ex↗
arXiv2003

A New Implementation of the Region of Interest Strategy for the ATLAS Second Level Trigger

Among the many challenges presented by the future ATLAS detector at the LHC are the high data taking rate and volume and the derivation of a rapid trigger decision with limited resources. To address this challenge within the ATLAS second level trigger system, a Region-of-Interest mechanism has been adopted which dramatically reduces the relevant fiducial volume necessary to be readout and processed to small regions guided by the hardware-based first level trigger. Software has been developed to allow fast translation between arbitrary geometric regions and identifiers of small collections of the event data. This facilitates on-demand data retrieval and collection building. The system is optimized to minimize the amount of data transferred and unnecessary building of complex objects. Details of the design and implementation are presented along with preliminary performance results.

physics.comp-ph↗
arXiv2001

Bottom Production

We review the prospects for bottom production physics at the LHC.

hep-ph↗