arXiv subjects

S. H. HosseinNia

Publications and source records attributed to S. H. HosseinNia.

9 recordsLinked to original sources

arXiv2022

Vibration suppression of a state-of-the-art wafer gripper

In this paper the implementation of piezoelectrics to a state-of-the-art wafer gripper is investigated. The objective is to propose and validate a solution method, which includes a mechanical design and control system, to achieve at least 5% damping for two eigenmodes of a wafer gripper. This objective serves as a 'proof of concept' to show the possibilities of implementing a state-of-the-art damping method to an industrial application, which in turn can be used to dampen different thin structures. The coupling relation between the piezoelectrics and their host structure were used to design the placement of the piezoelectric patches, together with modal analysis data of the a state-of-the-art wafer gripper. This data had been measured through an experimental setup. Active damping has been succesfully implemented onto the wafer gripper where positive position feedback (PPF) is used as a control algorithm to dampen two eigenmodes.

cs.RO↗

arXiv2022

Hybrid Tunable Magnet Actuator: Modeling and Design

Reluctance actuators are preferred for high-precision applications. Due to resistive losses in the coils, the accuracy of this type of actuator will reduce in quasi-static operation mode within a vacuum environment. By using soft permanent magnets whose magnetization states are in-situ tuned, no constant power is needed to create a force and thereby the resistive losses will reduce. In this paper, a new tuning method is investigated in order to reduce the resistive losses. By using a history-dependent and non-linear hysteresis model, a more efficient tuning algorithm is designed. Besides this, the position accuracy and control simplicity of a variable reluctance tunable magnet actuator are improved by linearizing the non-linear force-flux relationship. This is achieved by using bias fluxes generated by hard permanent magnets.

eess.SY↗

arXiv2021

Frequency Domain Stability Method for Reset Systems

Today, linear PID controllers cannot satisfy requirements of high-precision industry due to the development of technology. According to the literature, reset controllers can overcome this important barrier. However, similar to other non-linear controllers, stability analysis for these controllers is complex and needs parametric models of the systems. Consequently, the applicability of these controllers may diminish in industry. The well-known Hb method is one of the solutions of this significant problem. Nevertheless, assessing the Hb condition in the frequency-domain is complex, particularly for high dimensional plants. Furthermore, it cannot assess UBIBS stability of reset control systems in the case of reseting to non-zero values. In this paper, the aforementioned problems have been solved for the first and second order reset elements and a frequency-domain approach for assessing stability of reset control systems is developed. Finally, some practical examples are presented to demonstrate the effectiveness of the proposed approach to use the frequency response measurement directly to assess the stability.

eess.SY↗

arXiv2020

Tuning of a Class of Reset Elements Using Pseudo-Sensitivities

Currently, the demand for a better alternative to linear PID controllers is increasing due to the rising expectations of the high-tech industry. In literature, it has been shown that Constant in gain Lead in phase (CgLp) compensators, which are a type of reset element, have high potential to improve the performance of systems. Although there are few works which investigate tuning of these compensators, the high order harmonics and steady-state performances have not yet been considered in these methods. Recently, a frequencydomain framework has been developed to analyze closed-loop performances of reset control systems which includes high order harmonics. In this paper, this frequency-domain framework is combined with loop-shaping constraints to provide a reliable frequency-domain tuning method for CgLp compensators. Finally, different performance metrics of a CgLp compensator are compared with those of a PID controller on a precision positioning stage. The results show that the presented tuning method is effective, and the system with the CgLp compensator achieves superior dynamic performance to that of the PID controller.

eess.SY↗

arXiv2020

Frequency-Domain Modelling of Reset Control Systems using an Impulsive Description

The ever-increasing industry desire for improved performance makes linear controller design run into fundamental limitations. Nonlinear control methods such as Reset Control (RC) are needed to overcome these. RC is a promising candidate since, unlike other nonlinear methods, it easily integrates into the industry-preferred PID design framework. Thus far, RC has been analysed in the frequency domain either through describing function analysis or by direct closed-loop numerical computation. The former computes a simplified closed-loop RC response by assuming a sufficient low-pass behaviour. In doing so it ignores all harmonics, which literature has found to cause significant modelling prediction errors. The latter gives a precise solution, but by its direct closed-loop computation does not clearly show how open-loop RC design translates to closed-loop performance. The main contribution of this work is aimed at overcoming these limitations by considering an alternative approach for modelling RC using state-dependent impulse inputs. This permits accurately computing closed-loop RC behaviour starting from the underlying linear system, improving system understanding. A frequency-domain description for closed-loop RC is obtained, which is solved analytically by using several well-defined assumptions. This analytical solution is verified using a simulated high-precision stage, critically examining sources of modelling errors. The accuracy of the proposed method is further substantiated using controllers designed for various specifications.

eess.SY↗

arXiv2020

The optimal sequence for reset controllers

PID controllers cannot satisfy the high performance requirements since they are restricted by the water-bed effect. Thus, the need for a better alternative to linear PID controllers increases due to the rising demands of the high-tech industry. This has led many researchers to explore nonlinear controllers like reset control. Although reset controllers have been widely used to overcome the limitations of linear controllers in literature, the performance of the system varies depending on the relative sequence of controller linear and nonlinear parts. In this paper, the optimal sequence is found using high order sinusoidal input describing functions (HOSIDF). By arranging controller parts according to this strategy, better performance in the sense of precision and control input is achieved. The performance of the proposed sequence is validated on a precision positioning setup. The experimental results demonstrate that the optimal sequence found in theory outperforms other sequences.

eess.SY↗

arXiv2020

A Frequency-Domain Stability Method for Reset Systems

Nowadays, the demand for an alternative to linear PID controllers has increased because of the rising expectations of the high-precision industry. The potential of reset controllers to solve this important challenge has been extensively demonstrated in the literature. However, similarly to other non-linear controllers, the stability analysis for these controllers is complex and relies on parametric models of the systems which may hinder the applicability of these controllers in industry. The well-known Hbeta method tries to solve this significant issue. However, assessing the H\b{eta} condition in the frequency-domain is complex, especially for high dimensional plants. In addition, it cannot be used to assess UBIBS stability of reset control systems in the case of reseting to non-zero values. These problems have been solved in this paper for the first order reset elements, and an easy-to-use frequency approach for assessing stability of reset control systems is proposed. The effectiveness of the proposed approach is demonstrated through a practical example.

eess.SY↗

arXiv2012

Adaptive Fractional PID Controller for Robot Manipulator

A Fractional adaptive PID (FPID) controller for a robot manipulator will be proposed. The PID parameters have been optimized by Genetic algorithm. The proposed controller is found robust by means of simulation in a tracking job. The validity of the proposed controller is shown by simulation of two-link robot manipulator. The result then is compared with integer type adaptive PID controller. It is found that when error signals in the learning stage are bounded, the trajectory of the robot converges to the desired one asymptotically.

nlin.AO↗

arXiv2012

Controller Design for A Stance-Control Knee-Ankle-Foot Orthosis Based on Optimization Techniques

Design of active orthosis is a challenging problem from both the dynamic simulation and control points of view. The redundancy problem of the simultaneous human-orthosis actuation is an interesting exercise to solve concerning the analytical and computational cost effectiveness. The physiological static optimization approach tries to solve the actuation sharing problem. Its objective is to quantify the contributions of muscles and active orthosis to the net joint torques in order to select the proper actuator for the joint. Depending on the disability of each patient, different controllers can be designed. As a matter of fact, the duration of the gait cycle for each patient should be different. In this paper, a PI controller is designed whose parameters are tuned by optimizing a cost function which takes into account the patients muscle power and the error of the knee angle with the reference value. Moreover, the final time is obtained by minimizing the mean of integral squared errors. The performance of the method is shown by designing the controller for three types of patients, ordered from low to high disability. The objective of this work is to use optimal control techniques based on physiological static optimization approach to the design of active orthosis and its control.

nlin.AO↗