Searcharxiv⌕ Search

arXiv subjects

S. H. Naqib

Publications and source records attributed to S. H. Naqib.

At least 37 records · Page 2Linked to original sources
arXiv2024

Pressure dependent physical properties of a potential high-TC superconductor ScYH6: insights from first-principles study

We have investigated the structural, elastic, electronic, thermophysical, superconducting, and optical properties of ScYH6 under uniform hydrostatic pressures up to 25 GPa, using the density functional theory (DFT) formalism. Most of results reported here are novel. The compound ScYH6 has been found to be elastically and thermodynamically stable within the pressure range considered. The compound is brittle; the brittleness decreases with increasing pressure. The elastic anisotropy is low and the machinability index is moderate which increases gradually with rising pressure. The compound is a hard material. The electronic band structure shows weakly metallic character with low density of states at the Fermi level. The Debye temperature of the compound is high and increases with increasing pressure. The Grüneisen parameter of ScYH6 is low and the phonon thermal conductivity is high at room temperature. The compound is a very efficient reflector of infrared radiation. The compound is also an efficient absorber of visible and ultraviolet light. The overall effect of pressure on optical parameters is small. We have also investigated the pressure induced changes in the predicted superconducting state properties by considering the changes in the electronic density of states at the Fermi level, Debye temperature, and the repulsive Coulomb pseudopotential. The superconducting transition temperature is found to increase gradually with increasing pressure.

cond-mat.mtrl-sci↗
arXiv2023

DFT based investigation of structural, elastic, optoelectronic, thermophysical and superconducting state properties of binary Mo3P at different pressures

In recent years, the investigation of novel materials for various technological applications has gained much importance in materials science research. Tri-molybdenum phosphide (Mo3P), a promising transition metal phosphide (TMP), has gathered significant attention due to its unique structural and electronic properties, which already make it potentially valuable system for catalytic and electronic device applications. Through an in-depth study using the density functional theory (DFT) calculations, this work aims to clarify the basic properties of the Mo3P compound at different pressures. In this work, we have studied the structural, elastic, optoelectronic and thermophysical properties of binary Mo3P compound. In this investigation, we varied uniform hydrostatic pressure from 0 GPa to 30 GPa. A complete geometrical optimization for structural parameters is performed and the obtained values are in good accord with the experimental values where available. It is also found that Mo3P possesses very low level of elastic anisotropy, reasonably good machinability, ductile nature, relatively high Vickers hardness, high Debye temperature and high melting temperature. Thermomechanical properties indicate that the compound has potential to be used as a thermal barrier coating material. The bonding nature in Mo3P has been explored. The electronic band structure shows that Mo3P has no band gap and exhibits conventional metallic behavior. All of the energy dependent optical characteristics demonstrate apparent metallic behavior and agree exactly with the electronic density of states calculations. The compound has excellent reflective and absorptive properties suitable for optical applications. Pressure dependent variations of the physical properties are explored and their possible link with superconductivity has been discussed.

cond-mat.mtrl-sci↗
arXiv2023

First-principles pressure dependent investigation of the physical properties of KB2H8: a prospective high-TC superconductor

Using the density functional theory (DFT) based first-principles investigation, the structural, mechanical, hardness, elastic anisotropy, optoelectronic, and thermal properties of cubic KB2H8 have been studied within the uniform pressure range of 0 - 24 GPa. The calculated structural parameters are in good agreement with the previous theoretical work. The compound KB2H8 is found to be structurally and thermodynamically stable in the pressure range from 8 GPa to 24 GPa. Single crystal elastic constants Cij and bulk elastic moduli (B, G and Y) increase systematically with pressure from 8 GPa to 24 GPa. In the stable phase, KB2H8 is moderately elastically anisotropic and ductile in nature. The compound is highly machinable and fracture resistant. The Debye temperature, melting temperature and thermal conductivity increases with pressure. The results of electronic band structure calculations and optical parameters at different pressures are consistent with each other. The compound is optically isotropic. The compound KB2H8 has potential to be used as a very efficient solar energy reflector. The electronic energy density of states at the Fermi level decreases systematically with increasing pressure. The same trend is found for the repulsive Coulomb pseudopotential. Possible relevance of the studied properties to superconductivity has also been discussed in this paper.

cond-mat.mtrl-sci↗
arXiv2023

Oxysulfide Perovskites: Reduction of the Electronic Band Gap of RbTaO3 by Sulfur Substitution to Enhance Prospective Solar Cell and Thermoelectric Performances

In this study, the effects of sulfur substitution on the structural, mechanical, electronic, optical, and thermodynamic properties of RbTaO3-xSx have been investigated using the WIEN2k code in the framework of density functional theory (DFT). The cubic phase of RbTaO3 transforms to tetragonal for RbTaO2S and RbTaOS2, the later transforms again to a cubic phase with added sulfur for RbTaS3. The results showed that substituting S for O anions in RbTaO3 effectively decreased the band gap from 2.717 eV to 1.438 eV, 0.286 eV, and 0.103 eV for the RbTaO3,RbTaO2S, RbTaOS2, and RbTaS3 compounds, respectively. The optical constants such as dielectric constants, refractive index, absorption coefficient, photoconductivity, reflectivity and loss function have been calculated and analyzed. The elastic constants and moduli, and their anisotropic nature were also investigated. Finally, the Debye temperature, thermal conductivity, melting temperature, specific capacities and thermal expansion coefficients were computed and analyzed using established formalisms. The reduced band gap (1.438 eV) and high absorption coefficient (~106 cm-1) of RbTaO2S makes it suitable for solar cell applications and for other visible light devices. Reduction of the band gap and phonon thermal conductivity owing to Ssubstitution is expected to enhance thermoelectric performances of the S-containing phases

cond-mat.mtrl-sci↗
arXiv2023

Ab-initio insights into the physical properties of XIr3 (X = La, Th) superconductors: A comparative analysis

Here we report the structural, elastic, bonding, thermo-mechanical, optoelectronic and superconducting state properties of recently discovered XIr3 (X = La, Th) superconductors utilizing the density functional theory (DFT). The elastic, bonding, thermal and optical properties of these compounds are investigated for the first time. The calculated lattice and superconducting state parameters are in reasonable agreement to those found in the literature. In the ground state, both the compounds are mechanically stable and possess highly ductile character, high machinability, low Debye temperature, low bond hardness and significantly high melting point. The thermal conductivities of the compounds are found to be very low which suggests that they can be used for thermal insulation purpose. The population analysis and charge density distribution map confirm the presence of both ionic and covalent bonds in the compounds with ionic bond playing dominant roles. The calculated band structure and DOS profiles indicate metallic character. Unlike the significant anisotropy observed in elastic and thermal properties, all the optical constants of these compounds exhibit almost isotropic behavior. The optical constants correspond very well with the electronic band structure and DOS features. We have estimated the superconducting transition temperature of the compounds in this work.

cond-mat.mtrl-sci↗
arXiv2023

A comparative ab-initio investigation of the physical properties of cubic Laves phase compounds XBi$_2$ (X = K, Rb)

In this study, we looked into a number of physical properties of alkali-bismuth compounds KBi$_2$ and RbBi$_2$ in the cubic Laves phase using the density functional theory (DFT). The structural, elastic, anisotropy indices, hardness, thermo-physical parameters, electronic band structure, and optoelectronic properties have been explored. Most of the results presented in this work are novel in nature.

cond-mat.mtrl-sci↗
arXiv2023

Comprehensive first-principles insights into the physical properties of intermetallic Zr$_3$Ir: a noncentrosymmetric superconductor

We have looked into the structural, mechanical, optoelectronic, superconducting state and thermophysical aspects of intermetallic compound Zr$_3$Ir using the density functional theory (DFT). Many of the physical properties, including direction dependent mechanical properties, Vickers hardness, optical properties, chemical bonding nature, and charge density distributions, are being investigated for the first time. According to this study, Zr$_3$Ir exhibits ductile features, high machinability, significant metallic bonding, a low Vickers hardness with low Debye temperature, and a modest level of elastic anisotropy. The mechanical and dynamical stabilities of Zr$_3$Ir have been confirmed. The metallic nature of Zr$_3$Ir is seen in the electronic band structures with a high electronic energy density of states at the Fermi level. The bonding nature has been explored by the charge density mapping and bond population analysis. The tetragonal Zr$_3$Ir shows a remarkable electronic stability, as confirmed by the presence of a pseudogap in the electronic energy density of states at the Fermi level between the bonding and antibonding states. Optical parameters show very good agreement with the electronic properties. The reflectivity spectra reveal that Zr$_3$Ir is a good reflector in the infrared and near-visible regions. Zr$_3$Ir is an excellent ultra-violet (UV) radiation absorber. High refractive index at visible photon energies indicates that Zr$_3$Ir could be used to improve the visual aspects of electronic displays. All the optical constants exhibit a moderate degree of anisotropy. Zr$_3$Ir has a moderate melting point, high damage tolerance, and very low minimum thermal conductivity. The thermomechanical characteristics of Zr$_3$Ir reveal that it is a potential thermal barrier coating material. The superconducting state parameters of Zr$_3$Ir are also explored.

cond-mat.mtrl-sci↗
arXiv2023

DFT insights into MAX phase borides Hf2AB [A = S, Se, Te] in comparison with MAX phase carbides Hf2AC [A = S, Se, Te]

In this work, density functional theory (DFT) based calculations were performed to compute the physical properties (structural stability, mechanical behavior, electronic, thermodynamic, and optical properties) of synthesized MAX phases Hf2SB, Hf2SC, Hf2SeB, Hf2SeC, Hf2TeB, and the as-yet-undiscovered MAX carbide phase Hf2TeC. Calculations of formation energy, phonon dispersion curves, and elastic constants confirmed the stability of the aforementioned compounds. The obtained values of lattice parameters, elastic constants, and elastic moduli of Hf2SB, Hf2SC, Hf2SeB, Hf2SeC, and Hf2TeB showed fair agreement with earlier studies, whereas the values of the mentioned parameters for the predicted Hf2TeC exhibit a good consequence of B replacement by C. The anisotropic mechanical properties are exhibited by the considered MAX phases. The metallic nature and its anisotropic behavior were revealed by the electronic band structure and density of states. The analysis of the thermal properties Debye temperature, melting temperature, minimum thermal conductivity, and Gruneisen parameter confirmed that the carbide phases were more suited than the boride phases considered herein. The MAX phase response to incoming photons further demonstrated that they were metallic. Their suitability for use as coating materials to prevent solar heating was demonstrated by the reflectivity spectra. Additionally, this study demonstrated the impact of B replacing C in the MAX phases.

cond-mat.mtrl-sci↗
arXiv2023

Ab-initio insights into the structural, elastic, bonding, and thermophysical properties of UHx (x = 1, 2, 3, 5, 6, 7, 8) under pressure: possible relevance to high-Tc superconductivity

Binary uranium hydrides, UHx (x = 1, 2, 3, 5, 6, 7, 8), with different crystal symmetries are potentially interesting compounds for high-Tc superconductivity and as hydrogen storage systems. In this work we have explored the structural, elastic, mechanical, bonding, and thermophysical properties of these systems under uniform pressure via density functional theory based computations. Most of the results disclosed in this work are novel. From the calculations of the cohesive energy and enthalpy of formation, we have found that the titled compounds are chemically stable. The computed elastic constants at different pressures ensure elastic stability. All the binary hydrides are mechanically anisotropic. Pressure induced brittle-ductile transition takes place under high pressure. The compounds are machinable with the cubic α-UH3-Pm-3n showing very high value of the machinability index. All the compounds are fairly hard with cubic UH8 showing superhard character. The Debye temperatures and acoustic velocities of these compounds are high; the highest value is found for the cubic UH8. The melting temperature, Grüneisen parameter, minimal phonon thermal conductivity, and the thermal expansion coefficient of these compounds have also been studied at different pressures. All these parameters show excellent correspondence with the estimated Debye temperature, elastic parameters and bonding characteristics.

cond-mat.mtrl-sci↗
arXiv2023

Structural, elastic, electronic, bonding, thermo-mechanical and optical properties of predicted NbAlB MAB phase in comparison to MoAlB: DFT based ab-initio insights

In this study, we have used density functional theory (DFT) based first-principles investigation of the physical properties of prospective NbAlB compound for the first time. From the analysis of the cohesive energy and enthalpy of formation, it was found that NbAlB is chemically stable. The physical properties of NbAlB have been compared and contrasted with those obtained for MoAlB. Both these MAB phases are elastically anisotropic, mechanically stable, machinable and brittle materials. Structural and elastic features reflect the layered features. The estimated hardness of NbAlB is 19.0 GPa comparable to that of MoAlB (20.8 GPa) suggesting that predicted NbAlB is a hard compound and is suitable for heavy duty industrial applications. NbAlB is more machinable than MoAlB. Electronic band structure calculations reveal conventional metallic behavior with the electronic density of states at the Fermi level arising mainly due to the Nb 4d orbitals in NbAlB. The electronic density of states at the Fermi level is significantly higher in NbAlB in comparison to MoAlB, indicating that NbAlB is expected to exhibit higher level of electrical conductivity. Electronic dispersion is highly anisotropic for both MoAlB and NbAlB with substantially large electronic effective masses in the out-of-plane directions. The bonding features have been elucidated via the analysis of the band structure and charge density distribution. Both the compounds have mixed covalent, ionic and metallic bonding characteristics. The Fermi surfaces of MoAlB and NbAlB consists of electron and hole like sheets. The Debye temperatures of MoAlB and NbAlB are comparable. The estimated melting temperature of NbAlB is somewhat lower than that of MoAlB. NbAlB shows excellent reflection characteristics suitable to be used as an efficient solar reflector. NbAlB is also expected to absorb ultraviolet radiation very effectively.

cond-mat.mtrl-sci↗
arXiv2023

Ab-initio investigation of the physical properties of BaAgAs Dirac semimetal and its possible thermo-mechanical and optoelectronic applications

BaAgAs is a ternary Dirac semimetal which can be tuned across a number of topological orders. In this study we have investigated the bulk physical properties of BaAgAs using density functional theory based computations. Most of the results presented in this work are novel. The optimized structural parameters are in good agreement with previous results. The elastic constants indicate that BaAgAs is mechanically stable and brittle in nature. The compound is moderately hard and possesses fair degree of machinability. There is significant mechanical/elastic anisotropy in BaAgAs. The Debye temperature of the compound is medium and the phonon thermal conductivity and melting temperature are moderate as well. The bonding character is mixed with notable covalent contribution. The electronic band structure calculations reveal clear semimetallic behavior with a Dirac node at the Fermi level. BaAgAs has a small ellipsoidal Fermi surface centered at the G-point of the Brillouin zone. The phonon dispersion curves show dynamical stability. There is a clear phonon band gap between the acoustic and the optical branches. The energy dependent optical constants conform to the band structure calculations. The compound is an efficient absorber of the ultraviolet light and has potential to be used as an anti-reflection coating. Optical anisotropy of BaAgAs is moderate. The computed repulsive Coulomb pseudopotential is low indicating that the electronic correlations in this compound are not strong.

cond-mat.mtrl-sci↗
arXiv2023

A comprehensive ab-initio insights into the pressure dependent mechanical, phonon, bonding, electronic, optical, and thermal properties of CsV3Sb5 Kagome compound

In this paper, we have presented a comprehensive study of the physical properties of Kagome superconductor CsV3Sb5 using the density functional theory (DFT). The structural, mechanical, electronic, atomic bonding, hardness, thermodynamic, and optical properties, and their pressure dependences have been investigated for the first time. The calculated ground state lattice parameters and volume are in excellent agreement with available experimental results. The estimated single-crystal elastic constants ensured the mechanical stability of the compound, whereas phonon spectra endorse dynamical stability at zero pressure. The electronic band structure, energy density of states, optical properties confirmed the metallic features. The Pugh ratio, Poisson's ratio of the compound revealed softness and ductility. The hardness, estimated from several formulae, is quite low while the machinability index predicted good machinability with excellent dry lubricating properties. The compound shows tendency towards structural instability at a pressure around 18 GPa. The optical constants have also been studied to correlate those with electronic properties and to predict possible applications of this compound. Both mechanical and optical properties show anisotropy.CsV3Sb5 is predicted to be an efficient absorber of ultraviolet radiation. The compound is also an efficient reflector of visible light.

cond-mat.mtrl-sci↗
arXiv2023

DFT based investigation of bulk mechanical, thermophysical and optoelectronic properties of PbTaSe2 topological semimetal

PbTaSe2 is a non-centrosymmetric topological semimetal. In this work we have explored the structural, elastic, mechanical, bonding, electronic, acoustic, thermal, and optical properties of PbTaSe2. The electronic bond structure calculations confirm semi-metallic character. Fermi surface topology shows both electron and hole sheets. The single crystal elastic constants reveal that PbTaSe2 is elastically stable. The compound is soft, brittle, and highly machinable at the same time. It also possesses very high level of dry lubricity. Various anisotropy indicators suggest that PbTaSe2 is elastically anisotropic with layered character. The phonon dynamics has been investigated. Phonon dispersion plot shows that the compound is dynamically stable with a clear frequency gap between the acoustic and optical branches. The Debye temperature, phonon thermal conductivity, and melting temperature of PbTaSe2 is low. The compound has medium Grüneisen parameter. The bonding character is mainly dominated by ionic bonding with some metallic contribution. The optical parameters have been studied in detail. The optical spectra reveal metallic features. The compound reflects visible light very efficiently (reflectance above 60%). It is also an efficient absorber of the ultraviolet light. The compound exhibits significant optical anisotropy with respect to the polarization directions of the incident electric field.

cond-mat.mtrl-sci↗
arXiv2022

Interrelations among critical current density, irreversibility field and pseudogap in hole doped high-Tc cuprates

The effects of hole content (p) and oxygen deficiency (delta) on the zero-field critical current density, Jc0, were investigated for high-quality c-axis oriented Y1-xCaxBa2Cu3O7-delta (x = 0, 0.05, 0.10, and 0.20) thin films. Low temperature critical current density of these films above the optimum doping were found to be high and were primarily determined by the hole concentration, reaching a maximum at p ~ 0.185 +/- 0.005, irrespective of the level of oxygen deficiency. This implies that oxygen disorder plays only a secondary role and the intrinsic Jc0 is primarily governed by the carrier concentration in the copper oxide planes. Further support in favor of this was found from the analysis of the in-plane resistive transitions of c-axis oriented crystalline thin films of YBa2Cu3O7-delta (YBCO) under magnetic fields (H) applied along the c-direction, over a wide range of doped holes. The characteristic magnetic field (H0), linked to the vortex activation energy and the irreversibility field, exhibits similar p-dependence as shown by Jc0(p). We have explained these observations in terms of the doping dependent pseudogap (PG) in the low-energy electronic energy density of states. Both the intrinsic critical current density and the irreversibility field depend directly on the superconducting condensation energy, which in turn is largely controlled by the magnitude of the hole concentration dependent PG in the quasiparticle spectral density.

cond-mat.supr-con↗
arXiv2022

Ab-initio insights into the pressure dependent physical properties and possible high-Tc superconductivity in monoclinic and orthorhombic MgVH6

Here we have used the density functional theory (DFT) with the GGA-PBE approximation to investigate the structural, mechanical, electronic, hardness, thermal, superconductivity and optoelectronic properties under pressure for monoclinic (P21/m) and orthorhombic (Pmn21) structures of MgVH6. We have studied optical properties of P21/m phase at 0 GPa and Pmn21 phase at 100 GPa only (considering phase stability). Both of the phases of MgVH6 are thermodynamically stable. P21/m phase is mechanically stable but Pmn21 is mechanically unstable in our calculations for the pressures considered. Monoclinic (P21/m) is ductile in nature, on the other hand, orthorhombic (Pmn21) is brittle in nature at 100 GPa and becomes ductile for pressures in the range from 125 GPa to 200 GPa. Hardness calculations indicate superhard character of orthorhombic (Pmn21) structure at 100 GPa. The melting temperature of orthorhombic crystal is very high. This also agrees with the bulk modulus, Debye temperature, and hardness calculations. We have calculated theoretically the superconducting transition temperature Tc at different pressures only for the orthorhombic (Pmn21) structure following a previous study. The estimated values of transition temperatures are within 104.7 K to 26.1 K in the pressure range from 100 GPa to 200 GPa. MgVH6, in both the structures, are elastically and optically anisotropic.

cond-mat.mtrl-sci↗
arXiv2022

A comparative study of the structural, elastic, thermophysical, and optoelectronic properties of CaZn$_2$X$_2$ (X = N, P, As) semiconductors via ab-initio approach

We present a detailed density functional theory based calculations of the structural, elastic, lattice dynamical, thermophysical, and optoelectronic properties of ternary semiconductors CaZn$_2$X$_2$ (X = N, P, As) in this paper. The obtained lattice parameters are in excellent agreement with the experimental values and other theoretical findings. These elastic constants satisfy the mechanical stability criteria. Moreover, many thermophysical parameters of these compounds are estimated, including the Debye temperature, average sound velocity, melting temperature, heat capacity, lattice thermal conductivity, etc. The comprehensive analysis of the elastic constants and moduli show that CaZn$_2$X$_2$ compounds possess reasonably good machinability, relatively high Vickers hardness and relatively low Debye temperature. The phonon dispersion curves and phonon density of states are investigated for the first time for the compounds CaZn$_2$P$_2$ and CaZn$_2$As$_2$. It is observed from the phonon dispersion curves that the bulk CaZn$_2$X$_2$ (X = N, P, As) compounds are dynamically stable. Electronic properties have been studied through the band structures and electronic energy density of states. The electronic band structures show that CaZn$_2$N$_2$ and CaZn$_2$As$_2$ possess direct band gaps while the compound CaZn$_2$P$_2$ show indirect band gap. The bonding characters of CaZn$_2$X$_2$ (X = N, P, As) compounds are investigated. Energy dependent optical parameters exhibit good correspondence with the electronic energy density of states features. We have thoroughly discussed the reflectivity, absorption coefficient, refractive index, dielectric function, optical conductivity and loss function of these semiconductors. The optical absorption, reflectivity spectra and the refractive index of CaZn$_2$X$_2$ (X = N, P, As) show that the compounds hold promise to be used in optoelectronic devices.

cond-mat.mtrl-sci↗
arXiv2022

Pressure-dependent semiconductor-metal transition and elastic, electronic, optical, and thermophysical properties of SnS binary chalcogenide

Density functional theory based study of the pressure dependent physical properties of binary SnS compound has been carried out. The computed elastic constants reveal that SnS is mechanically stable and brittle under ambient conditions. With increasing pressure, the compound becomes ductile. The Poisson's ratio also indicates brittle-ductile transition with increasing pressure. The hardness of SnS increases significantly with pressure. The compound possesses elastic anisotropy. The ground state electronic band structure is semiconducting with a small band gap which becomes metallic under pressure. The band becomes more and more dispersive with the increase in pressure while the electronic correlations decrease as pressure is raised. Both the Debye temperature and the phonon thermal conductivity of SnS increase sharply with pressure. The Melting temperature of the compound is low. Mixed bonding characteristics are found with ionic and covalent contributions. SnS is a good absorber of ultraviolet light. The reflectivity of the material increases with the increase in pressure. The reflectivity is nonselective over a wide spectral range. The low energy refractive index is high. All these optical characteristics are useful for prospective optoelectronic device applications. The optical anisotropy is low.

cond-mat.mtrl-sci↗
arXiv2022

Comparative analysis of physical properties of some binary transition metal carbides XC (X = Nb, Ta, Ti): Insights from a comprehensive ab-initio study

Binary metallic carbides belong to a technologically prominent class of materials. We have explored the structural, mechanical, electronic, optical, and some thermophysical properties of XC (X = Nb, Ta, Ti) binary metallic carbides in details employing first-principles method. Some of the results obtained are novel. A comparative analysis has been made.

cond-mat.mtrl-sci↗