arXiv subjects

S. J. Brooks

Publications and source records attributed to S. J. Brooks.

7 recordsLinked to original sources

arXiv2026

White Paper on a Novel FFA-Based CEBAF Upgrade to 22 GeV

We present a conceptual design for a cost-effective upgrade of the Continuous Electron Beam Accelerator Facility (CEBAF) to 22 GeV using non-scaling fixed-field alternating-gradient (FFA) arcs built from Halbach-style permanent magnets. Building on the eight-pass energy-recovery demonstration at the Cornell--BNL CBETA test accelerator, the design replaces the highest-energy recirculation arcs with a pair of FFA arcs that simultaneously transport six passes spanning a factor-of-two momentum range. We describe the machine layout; including the injector, recirculating linacs, spreaders and recombiners, FFA arcs, splitters, transition and extraction regions; together with beam-dynamics validation studies covering emittance growth, synchrotron-radiation-driven depolarization, and orbit correction, and we summarize permanent-magnet design, prototyping, and radiation-resiliency results. This white paper documents the accelerator physics underpinning a staged path to 22 GeV that preserves CEBAF's multi-hall, high-luminosity, polarized-beam capabilities.

physics.acc-ph↗

arXiv2024

Higher-Order Corrections to Optimisers based on Newton's Method

The Newton, Gauss--Newton and Levenberg--Marquardt methods all use the first derivative of a vector function (the Jacobian) to minimise its sum of squares. When the Jacobian matrix is ill-conditioned, the function varies much faster in some directions than others and the space of possible improvement in sum of squares becomes a long narrow ellipsoid in the linear model. This means that even a small amount of nonlinearity in the problem parameters can cause a proposed point far down the long axis of the ellipsoid to fall outside of the actual curved valley of improved values, even though it is quite nearby. This paper presents a differential equation that `follows' these valleys, based on the technique of geodesic acceleration, which itself provides a 2$^\mathrm{nd}$ order improvement to the Levenberg--Marquardt iteration step. Higher derivatives of this equation are computed that allow $n^\mathrm{th}$ order improvements to the optimisation methods to be derived. These higher-order accelerated methods up to 4$^\mathrm{th}$ order are tested numerically and shown to provide substantial reduction of both number of steps and computation time.

math.NA↗

arXiv2018

Potential and Issues for Future Accelerators and Ultimate Colliders

Particle colliders have been remarkably successful tools in particle and nuclear physics. What are the future trends and limitations of accelerators as they currently exist, and are there possible alternative approaches? What would the ultimate collider look like? This talk examines some challenges and possible solutions. Accelerating a single particle rather than a thermal distribution may allow exploration of more controlled interactions without background. Also, cost drivers are possibly the most important limiting factor for large accelerators in the foreseeable future so emerging technologies to reduce cost are highlighted.

physics.acc-ph↗

arXiv2017

CBETA Design Report, Cornell-BNL ERL Test Accelerator

This design report describes the construction plans for the world's first multi-pass SRF ERL. It is a 4-pass recirculating linac that recovers the beam's energy by 4 additional, decelerating passes. All beams are returned for deceleration in a single beam pipe with a large-momentum-aperture permanent magnet FFAG optics. Cornell University has been pioneering a new class of accelerators, Energy Recovery Linacs (ERLs), with a new characteristic set of beam parameters. Technology has been prototyped that is essential for any high brightness electron ERL. This includes a DC electron source and an SRF injector Linac with world-record current and normalized brightness in a bunch train, a high-current linac cryomodule, and a high-power beam stop, and several diagnostics tools for high-current and high-brightness beams. All these are now being used to construct a novel one-cryomodule ERL in Cornell's Wilson Lab. Brookhaven National Laboratory (BNL) has designed a multi-turn ERL for eRHIC, where beam is transported more than 20 times around the 4km long RHIC tunnel. The number of transport lines is minimized by using two arcs with strongly-focusing permanent magnets that can control many beams of different energies. A collaboration between BNL and Cornell has been formed to investigate this multi-turn eRHIC ERL design by building a 4-turn, one-cryomodule ERL at Cornell. It also has a return loop built with strongly focusing permanent magnets and is meant to accelerate 40mA beam to 150MeV. This high-brightness beam will have applications beyond accelerator research, in industry, in nuclear physics, and in X-ray science.

physics.acc-ph↗

arXiv2015

The Cornell-BNL FFAG-ERL Test Accelerator: White Paper

The Cornell-BNL FFAG-ERL Test Accelerator (C$β$) will comprise the first ever Energy Recovery Linac (ERL) based on a Fixed Field Alternating Gradient (FFAG) lattice. In particular, we plan to use a Non Scaling FFAG (NS-FFAG) lattice that is very compact and thus space- and cost- effective, enabling multiple passes of the electron beam in a single recirculation beam line, using the superconducting RF (SRF) linac multiple times. The FFAG-ERL moves the cost optimized linac and recirculation lattice to a dramatically better optimum. The prime accelerator science motivation for C$β$ is proving that the FFAG-ERL concept works. This is an important milestone for the Brookhaven National Laboratory (BNL) plans to build a major Nuclear Physics facility, eRHIC, based on producing 21 GeV electron beams to collide with the RHIC ion beams. A consequence of the C$β$ work would be the availability of significantly better, cost-effective, compact CW high-brightness electron beams for a plethora of scientific investigations and applications, such as X-ray sources, dark-matter and dark-energy searches, and industrial high-power Free-Electron Laser (FEL) applications. C$β$ brings together the resources and expertise of a large DOE National Laboratory, BNL, and a leading research university, Cornell. C$β$ will be built in an existing building at Cornell, for the most part using components that have been developed under previous R&D programs, including a fully commissioned world-leading photoemission electron injector, a large SRF accelerator module, and a high-power beam stop. The only elements that require design and construction from scratch is the FFAG magnet transport lattice. This white paper describes a project that promises to propel high-power, high-brightness electron beam science and applications to an exciting new level.

physics.acc-ph↗

arXiv2014

eRHIC Design Study: An Electron-Ion Collider at BNL

This document presents BNL's plan for an electron-ion collider, eRHIC, a major new research tool that builds on the existing RHIC facility to advance the long-term vision for Nuclear Physics to discover and understand the emergent phenomena of Quantum Chromodynamics (QCD), the fundamental theory of the strong interaction that binds the atomic nucleus. We describe the scientific requirements for such a facility, following up on the community-wide 2012 white paper, 'Electron-Ion Collider: the Next QCD Frontier', and present a design concept that incorporates new, innovative accelerator techniques to provide a cost-effective upgrade of RHIC with polarized electron beams colliding with the full array of RHIC hadron beams. The new facility will deliver electron-nucleon luminosity of 10^33-10^34 cm-1sec-1 for collisions of 15.9 GeV polarized electrons on either 250 GeV polarized protons or 100 GeV/u heavy ion beams. The facility will also be capable of providing an electron beam energy of 21.2 GeV, at reduced luminosity. We discuss the on-going R&D effort to realize the project, and present key detector requirements and design ideas for an experimental program capable of making the 'golden measurements' called for in the EIC White Paper.

physics.acc-ph↗

arXiv2011

Interim Design Report

The International Design Study for the Neutrino Factory (the IDS-NF) was established by the community at the ninth "International Workshop on Neutrino Factories, super-beams, and beta- beams" which was held in Okayama in August 2007. The IDS-NF mandate is to deliver the Reference Design Report (RDR) for the facility on the timescale of 2012/13. In addition, the mandate for the study [3] requires an Interim Design Report to be delivered midway through the project as a step on the way to the RDR. This document, the IDR, has two functions: it marks the point in the IDS-NF at which the emphasis turns to the engineering studies required to deliver the RDR and it documents baseline concepts for the accelerator complex, the neutrino detectors, and the instrumentation systems. The IDS-NF is, in essence, a site-independent study. Example sites, CERN, FNAL, and RAL, have been identified to allow site-specific issues to be addressed in the cost analysis that will be presented in the RDR. The choice of example sites should not be interpreted as implying a preferred choice of site for the facility.

hep-ex↗