arXiv subjects

S. J. Haigh

Publications and source records attributed to S. J. Haigh.

At least 19 recordsLinked to original sources

arXiv2026

Layer-selective hydrogenation and proton transport in twisted bilayer graphene

Recent work investigated graphene's hydrogenation with independent control of the electric field, E, and charge density, n, in the crystal and showed that the process is controlled by n. Here, we demonstrate layer-selective conductor-insulator transitions in twisted bilayer graphene, driven by hydrogenation at fixed n under strong E. This process is accompanied by proton transport through the bilayer, enabling several parallel and configurable logic gates in the devices. Selectivity arises because the large twist angle decouples the two layers' electronic systems, enabling independent control of their charge densities. Polarisation by the field then induces a charge imbalance at fixed total n, triggering hydrogenation when one of the layers' charge densities reaches the threshold for monolayer hydrogenation. Our results introduce a new type of electrode-electrolyte interface in which electrochemical processes are controlled with two decoupled 2D electron gases, opening new design opportunities for energy and information processing devices.

cond-mat.mes-hall↗

arXiv2021

Iron-silica interaction during reduction of precipitated silica-promoted iron oxides using in situ XRD and TEM

The effect of silica-promotion on the reduction of iron oxides in hydrogen was investigated using in situ X-ray diffraction and aberration-corrected transmission electron microscopy to understand the mechanism of reduction and the identity of the iron(II) silicate phase that has historically been designated as the cause of the iron-silica interaction in such materials. In the absence of a silica promoter the reduction of hematite to α-Fe proceeds via magnetite. Silica promoted amorphous iron oxide is reduced to α-Fe via stable magnetite and wüstite phases. During reduction of silica-promoted iron oxide, Fe0 diffuses out of the amorphous silica-promoted iron oxide matrix upon reduction from Fe2+ and coexists with an amorphous Fe-O-Si matrix. Certain portions of wüstite remain difficult to reduce to α-Fe owing to the formation of a protective silica-containing layer covering the remaining iron oxide regions. Given sufficient energy, this amorphous Fe-O-Si material forms ordered, crystalline fayalite.

cond-mat.mtrl-sci↗

arXiv2020

In-Orbit Aerodynamic Coefficient Measurements using SOAR (Satellite for Orbital Aerodynamics Research)

The Satellite for Orbital Aerodynamics Research (SOAR) is a CubeSat mission, due to be launched in 2021, to investigate the interaction between different materials and the atmospheric flow regime in very low Earth orbits (VLEO). Improving knowledge of the gas-surface interactions at these altitudes and identification of novel materials that can minimise drag or improve aerodynamic control are important for the design of future spacecraft that can operate in lower altitude orbits. Such satellites may be smaller and cheaper to develop or can provide improved Earth observation data or communications link-budgets and latency. Using precise orbit and attitude determination information and the measured atmospheric flow characteristics the forces and torques experienced by the satellite in orbit can be studied and estimates of the aerodynamic coefficients calculated. This paper presents the scientific concept and design of the SOAR mission. The methodology for recovery of the aerodynamic coefficients from the measured orbit, attitude, and in-situ atmospheric data using a least-squares orbit determination and free-parameter fitting process is described and the experimental uncertainty of the resolved aerodynamic coefficients is estimated. The presented results indicate that the combination of the satellite design and experimental methodology are capable of clearly illustrating the variation of drag and lift coefficient for differing surface incidence angle. The lowest uncertainties for the drag coefficient measurement are found at approximately 300 km, whilst the measurement of lift coefficient improves for reducing orbital altitude to 200 km.

physics.space-ph↗

arXiv2020

Capillary condensation under atomic-scale confinement

Capillary condensation of water is ubiquitous in nature and technology. It routinely occurs in granular and porous media, can strongly alter such properties as adhesion, lubrication, friction and corrosion, and is important in many processes employed by microelectronics, pharmaceutical, food and other industries. The century-old Kelvin equation is commonly used to describe condensation phenomena and shown to hold well for liquid menisci with diameters as small as several nm. For even smaller capillaries that are involved in condensation under ambient humidity and, hence, of particular practical interest, the Kelvin equation is expected to break down, because the required confinement becomes comparable to the size of water molecules. Here we take advantage of van der Waals assembly of two-dimensional crystals to create atomic-scale capillaries and study condensation inside. Our smallest capillaries are less than 4 angstroms in height and can accommodate just a monolayer of water. Surprisingly, even at this scale, the macroscopic Kelvin equation using the characteristics of bulk water is found to describe accurately the condensation transition in strongly hydrophilic (mica) capillaries and remains qualitatively valid for weakly hydrophilic (graphene) ones. We show that this agreement is somewhat fortuitous and can be attributed to elastic deformation of capillary walls, which suppresses giant oscillatory behavior expected due to commensurability between atomic-scale confinement and water molecules. Our work provides a much-needed basis for understanding of capillary effects at the smallest possible scale important in many realistic situations.

cond-mat.mes-hall↗

arXiv2020

The Benefits of Very Low Earth Orbit for Earth Observation Missions

Very low Earth orbits (VLEO), typically classified as orbits below approximately 450 km in altitude, have the potential to provide significant benefits to spacecraft over those that operate in higher altitude orbits. This paper provides a comprehensive review and analysis of these benefits to spacecraft operations in VLEO, with parametric investigation of those which apply specifically to Earth observation missions. The most significant benefit for optical imaging systems is that a reduction in orbital altitude improves spatial resolution for a similar payload specification. Alternatively mass and volume savings can be made whilst maintaining a given performance. Similarly, for radar and lidar systems, the signal-to-noise ratio can be improved. Additional benefits include improved geospatial position accuracy, improvements in communications link-budgets, and greater launch vehicle insertion capability. The collision risk with orbital debris and radiation environment can be shown to be improved in lower altitude orbits, whilst compliance with IADC guidelines for spacecraft post-mission lifetime and deorbit is also assisted. Finally, VLEO offers opportunities to exploit novel atmosphere-breathing electric propulsion systems and aerodynamic attitude and orbit control methods. However, key challenges associated with our understanding of the lower thermosphere, aerodynamic drag, the requirement to provide a meaningful orbital lifetime whilst minimising spacecraft mass and complexity, and atomic oxygen erosion still require further research. Given the scope for significant commercial, societal, and environmental impact which can be realised with higher performing Earth observation platforms, renewed research efforts to address the challenges associated with VLEO operations are required.

physics.space-ph↗

arXiv2020

Electrically pumped WSe$_2$-based light-emitting van der Waals heterostructures embedded in monolithic dielectric microcavities

Vertical stacking of atomically thin layered materials opens new possibilities for the fabrication of heterostructures with favorable optoelectronic properties. The combination of graphene, hexagonal boron nitride and semiconducting transition metal dichalcogenides allows fabrication of electroluminescence (EL) devices, compatible with a wide range of substrates. Here, we demonstrate a full integration of an electroluminescent van der Waals heterostructure in a monolithic optical microcavity made of two high reflectivity dielectric distributed Bragg reflectors (DBRs). Owing to the presence of graphene and hexagonal boron nitride protecting the WSe$_2$ during the top mirror deposition, we fully preserve the optoelectronic behaviour of the device. Two bright cavity modes appear in the EL spectrum featuring Q-factors of 250 and 580 respectively: the first is attributed directly to the monolayer area, while the second is ascribed to the portion of emission guided outside the WSe$_2$ island. By embedding the EL device inside the microcavity structure, a significant modification of the directionality of the emitted light is achieved, with the peak intensity increasing by nearly two orders of magnitude at the angle of the maximum emission compared with the same EL device without the top DBR. Furthermore, the coupling of the WSe$_2$ EL to the cavity mode with a dispersion allows a tuning of the peak emission wavelength exceeding 35 nm (80 meV) by varying the angle at which the EL is observed from the microcavity. This work provides a route for the development of compact vertical-cavity surface-emitting devices based on van der Waals heterostructures.

physics.optics↗

arXiv2019

Enhanced superconductivity in few-layer TaS$_2$ due to healing by oxygenation

When approaching the atomically thin limit, defects and disorder play an increasingly important role in the properties of two-dimensional materials. Superconductivity is generally thought to be vulnerable to these effects, but here we demonstrate the contrary in the case of oxygenation of ultrathin tantalum disulfide (TaS$_2$). Our first-principles calculations show that incorporation of oxygen into the TaS$_2$ crystal lattice is energetically favourable and effectively heals sulfur vacancies typically present in these crystals, thus restoring the carrier density to the intrinsic value of TaS$_2$. Strikingly, this leads to a strong enhancement of the electron-phonon coupling, by up to 80% in the highly-oxygenated limit. Using transport measurements on fresh and aged (oxygenated) few-layer TaS$_2$, we found a marked increase of the superconducting critical temperature ($T_{\mathrm{c}}$) upon aging, in agreement with our theory, while concurrent electron microscopy and electron-energy loss spectroscopy confirmed the presence of sulfur vacancies in freshly prepared TaS$_2$ and incorporation of oxygen into the crystal lattice with time. Our work thus reveals the mechanism by which certain atomic-scale defects can be beneficial to superconductivity and opens a new route to engineer $T_{\mathrm{c}}$ in ultrathin materials.

cond-mat.supr-con↗

arXiv2019

Micromagnetometry of two-dimensional ferromagnets

The study of atomically thin ferromagnetic crystals has led to the discovery of unusual magnetic behaviour and provided insight into the magnetic properties of bulk materials. However, the experimental techniques that have been used to explore ferromagnetism in such materials cannot probe the magnetic field directly. Here, we show that ballistic Hall micromagnetometry can be used to measure the magnetization of individual two-dimensional ferromagnets. Our devices are made by van der Waals assembly in such a way that the investigated ferromagnetic crystal is placed on top of a multi-terminal Hall bar made from encapsulated graphene. We use the micromagnetometry technique to study atomically thin chromium tribromide (CrBr3). We find that the material remains ferromagnetic down to monolayer thickness and exhibits strong out-of-plane anisotropy. We also find that the magnetic response of CrBr3 varies little with the number of layers and its temperature dependence cannot be described by the simple Ising model of two-dimensional ferromagnetism.

cond-mat.mes-hall↗

arXiv2019

Atomically-thin micas as proton conducting membranes

Monolayers of graphene and hexagonal boron nitride (hBN) are highly permeable to thermal protons. For thicker two-dimensional (2D) materials, proton conductivity diminishes exponentially so that, for example, monolayer MoS2 that is just three atoms thick is completely impermeable to protons. This seemed to suggest that only one-atom-thick crystals could be used as proton conducting membranes. Here we show that few-layer micas that are rather thick on the atomic scale become excellent proton conductors if native cations are ion-exchanged for protons. Their areal conductivity exceeds that of graphene and hBN by one-two orders of magnitude. Importantly, ion-exchanged 2D micas exhibit this high conductivity inside the infamous gap for proton-conducting materials, which extends from 100 C to 500 C. Areal conductivity of proton-exchanged monolayer micas can reach above 100 S cm-2 at 500 C, well above the current requirements for the industry roadmap. We attribute the fast proton permeation to 5 A-wide tubular channels that perforate micas' crystal structure which, after ion exchange, contain only hydroxyl groups inside. Our work indicates that there could be other 2D crystals with similar nm-scale channels, which could help close the materials gap in proton-conducting applications.

cond-mat.mes-hall↗

arXiv2018

Laser writable high-K dielectric for van der Waals nano-electronics

Like silicon-based semiconductor devices, van der Waals heterostructures will require integration with high-K oxides. This is needed to achieve suitable voltage scaling, improved performance as well as allowing for added functionalities. Unfortunately, commonly used high-k oxide deposition methods are not directly compatible with 2D materials. Here we demonstrate a method to embed a multi-functional few nm thick high-k oxide within van der Waals devices without degrading the properties of the neighbouring 2D materials. This is achieved by in-situ laser oxidation of embedded few layer HfS2 crystals. The resultant oxide is found to be in the amorphous phase with a dielectric constant of k~15 and break-down electric fields in the range of 0.5-0.6 V/nm. This transformation allows for the creation of a variety of fundamental nano-electronic and opto-electronic devices including, flexible Schottky barrier field effect transistors, dual gated graphene transistors as well as vertical light emitting and detecting tunnelling transistors. Furthermore, upon dielectric break-down, electrically conductive filaments are formed. This filamentation process can be used to electrically contact encapsulated conductive materials. Careful control of the filamentation process also allows for reversible switching between two resistance states. This allows for the creation of resistive switching random access memories (ReRAMs). We believe that this method of embedding a high-k oxide within complex van der Waals heterostructures could play an important role in future flexible multi-functional van der Waals devices.

cond-mat.mes-hall↗

arXiv2018

Ballistic molecular transport through two-dimensional channels

Gas permeation through nanoscale pores is ubiquitous in nature and plays an important role in a plethora of technologies. Because the pore size is typically smaller than the mean free path of gas molecules, their flow is conventionally described by the Knudsen theory that assumes diffuse reflection (random-angle scattering) at confining walls. This assumption has proven to hold surprisingly well in experiment, and only a few cases of partially specular (mirror-like) reflection are known. Here we report gas transport through angstrom-scale channels with atomically-flat walls and show that surface scattering can be both diffuse or specular, depending on fine details of the surface atomic landscape, and quantum effects contribute to the specularity at room temperature. The channels made from graphene or boron nitride allow a helium gas flow that is orders of magnitude faster than expected from the theory. This is explained by specular surface scattering, which leads to ballistic transport and frictionless gas flow. Similar channels but with molybdenum disulfide walls exhibit much slower permeation that remains well described by Knudsen diffusion. The difference is attributed to stronger atomic corrugations at MoS2 surfaces, which are similar in height to the size of transported atoms and their de Broglie wavelength. The importance of the latter, matter-wave contribution is corroborated by the observation of a reversed isotope effect in which the mass flow of hydrogen is notably higher than that of deuterium, in contrast to the relation expected for classical flows. Our results provide insights into atomistic details of molecular permeation, which so far could be accessed only in simulations, and show a possibility of studying gas transport under a controlled confinement comparable to the quantum-mechanical size of atoms.

cond-mat.mes-hall↗

arXiv2018

Transport of hydrogen isotopes through interlayer spacing in van der Waals crystals

Atoms start behaving as waves rather than classical particles if confined in spaces commensurate with their de Broglie wavelength. At room temperature this length is only about one angstrom even for the lightest atom, hydrogen. This restricts quantum-confinement phenomena for atomic species to the realm of very low temperatures. Here we show that van der Waals gaps between atomic planes of layered crystals provide angstrom-size channels that make quantum confinement of protons apparent even at room temperature. Our transport measurements show that thermal protons experience a notably higher barrier than deuterons when entering van der Waals gaps in hexagonal boron nitride and molybdenum disulfide. This is attributed to the difference in de Broglie wavelength of the isotopes. Once inside the crystals, transport of both isotopes can be described by classical diffusion, albeit with unexpectedly fast rates, comparable to that of protons in water. The demonstrated angstrom-size channels can be exploited for further studies of atomistic quantum confinement and, if the technology can be scaled up, for sieving hydrogen isotopes.

cond-mat.mes-hall↗

arXiv2017

Magnetoresistance of vertical Co-graphene-NiFe junctions controlled by charge transfer and proximity-induced spin splitting in graphene

Graphene is hailed as an ideal material for spintronics due to weak intrinsic spin-orbit interaction that facilitates lateral spin transport and tunability of its electronic properties, including a possibility to induce magnetism in graphene. Another promising application of graphene is related to its use as a spacer separating ferromagnetic metals (FMs) in vertical magnetoresistive devices, the most prominent class of spintronic devices widely used as magnetic sensors. In particular, few-layer graphene was predicted to act as a perfect spin filter. Here we show that the role of graphene in such devices (at least in the absence of epitaxial alignment between graphene and the FMs) is different and determined by proximity-induced spin splitting and charge transfer with adjacent ferromagnetic metals, making graphene a weak FM electrode rather than a spin filter. To this end, we report observations of magnetoresistance (MR) in vertical Co-graphene-NiFe junctions with 1 to 4 graphene layers separating the ferromagnets, and demonstrate that the dependence of the MR sign on the number of layers and its inversion at relatively small bias voltages is consistent with spin transport between weakly doped and differently spin-polarized layers of graphene. The proposed interpretation is supported by the observation of an MR sign reversal in biased Co-graphene-hBN-NiFe devices and by comprehensive structural characterization. Our results suggest a new architecture for vertical devices with electrically controlled MR.

cond-mat.mes-hall↗

arXiv2017

Tuneable Sieving of Ions Using Graphene Oxide Membranes

Graphene oxide membranes show exceptional molecular permeation properties, with a promise for many applications. However, their use in ion sieving and desalination technologies is limited by a permeation cutoff of ~9 Angstrom, which is larger than hydrated ion diameters for common salts. The cutoff is determined by the interlayer spacing d ~13.5 Angstrom, typical for graphene oxide laminates that swell in water. Achieving smaller d for the laminates immersed in water has proved to be a challenge.Here we describe how to control d by physical confinement and achieve accurate and tuneable ion sieving. Membranes with d from ~ 9.8 Angstrom to 6.4 Angstrom are demonstrated, providing the sieve size smaller than typical ions' hydrated diameters.In this regime, ion permeation is found to be thermally activated with energy barriers of ~10-100 kJ/mol depending on d. Importantly, permeation rates decrease exponentially with decreasing the sieve size but water transport is weakly affected (by a factor of <2). The latter is attributed to a low barrier for water molecules entry and large slip lengths inside graphene capillaries. Building on these findings, we demonstrate a simple scalable method to obtain graphene-based membranes with limited swelling, which exhibit 97% rejection for NaCl.

cond-mat.mtrl-sci↗

arXiv2016

Molecular transport through capillaries made with atomic-scale precision

Nanometre-scale pores and capillaries have long been studied because of their importance in many natural phenomena and their use in numerous applications. A more recent development is the ability to fabricate artificial capillaries with nanometre dimensions, which has enabled new research on molecular transport and led to the emergence of nanofluidics. But surface roughness in particular makes it challenging to produce capillaries with precisely controlled dimensions at this spatial scale. Here we report the fabrication of narrow and smooth capillaries through van der Waals assembly, with atomically flat sheets at the top and bottom separated by spacers made of two-dimensional crystals with a precisely controlled number of layers. We use graphene and its multilayers as archetypal two-dimensional materials to demonstrate this technology, which produces structures that can be viewed as if individual atomic planes had been removed from a bulk crystal to leave behind flat voids of a height chosen with atomic-scale precision. Water transport through the channels, ranging in height from one to several dozen atomic planes, is characterized by unexpectedly fast flow (up to 1 metre per second) that we attribute to high capillary pressures (about 1,000 bar) and large slip lengths. For channels that accommodate only a few layers of water, the flow exhibits a marked enhancement that we associate with an increased structural order in nanoconfined water. Our work opens up an avenue to making capillaries and cavities with sizes tunable to ångström precision, and with permeation properties further controlled through a wide choice of atomically flat materials available for channel walls.

cond-mat.mtrl-sci↗

arXiv2016

Van der Waals pressure and its effect on trapped interlayer molecules

Van der Waals assembly of two-dimensional (2D) crystals continue attract intense interest due to the prospect of designing novel materials with on-demand properties. One of the unique features of this technology is the possibility of trapping molecules or compounds between 2D crystals. The trapped molecules are predicted to experience pressures as high as 1 GPa. Here we report measurements of this interfacial pressure by capturing pressure-sensitive molecules and studying their structural and conformational changes. Pressures of 1.2 +/- 0.3 GPa are found using Raman spectrometry for molecular layers of one nanometer in thickness. We further show that this pressure can induce chemical reactions and several trapped salts or compounds are found to react with water at room temperature, leading to 2D crystals of the corresponding oxides. This pressure and its effect should be taken into account in studies of van der Waals heterostructures and can also be exploited to modify materials confined at the atomic interfaces.

cond-mat.mtrl-sci↗

arXiv2015

WSe2 light-emitting tunneling transistors with enhanced brightness at room temperature

Monolayers of molybdenum and tungsten dichalcogenides are direct bandgap semiconductors, which makes them promising for opto-electronic applications. In particular, van der Waals heterostructures consisting of monolayers of MoS2 sandwiched between atomically thin hexagonal boron nitride (hBN) and graphene electrodes allows one to obtain light emitting quantum wells (LEQWs) with low-temperature external quantum efficiency (EQE) of 1%. However, the EQE of MoS2 and MoSe2-based LEQWs shows behavior common for many other materials: it decreases fast from cryogenic conditions to room temperature, undermining their practical applications. Here we compare MoSe2 and WSe2 LEQWs. We show that the EQE of WSe2 devices grows with temperature, with room temperature EQE reaching 5%, which is 250x more than the previous best performance of MoS2 and MoSe2 quantum wells in ambient conditions. We attribute such a different temperature dependences to the inverted sign of spin-orbit splitting of conduction band states in tungsten and molybdenum dichalcogenides, which makes the lowest-energy exciton in WSe2 dark.

cond-mat.mes-hall↗

arXiv2015

Quality heterostructures from two dimensional crystals unstable in air by their assembly in inert atmosphere

Many layered materials can be cleaved down to individual atomic planes, similar to graphene, but only a small minority of them are stable under ambient conditions. The rest reacts and decomposes in air, which has severely hindered their investigation and possible uses. Here we introduce a remedial approach based on cleavage, transfer, alignment and encapsulation of air-sensitive crystals, all inside a controlled inert atmosphere. To illustrate the technology, we choose two archetypal two-dimensional crystals unstable in air: black phosphorus and niobium diselenide. Our field-effect devices made from their monolayers are conductive and fully stable under ambient conditions, in contrast to the counterparts processed in air. NbSe2 remains superconducting down to the monolayer thickness. Starting with a trilayer, phosphorene devices reach sufficiently high mobilities to exhibit Landau quantization. The approach offers a venue to significantly expand the range of experimentally accessible two-dimensional crystals and their heterostructures.

cond-mat.mes-hall↗