arXiv subjects

S. J. Wijnholds

Publications and source records attributed to S. J. Wijnholds.

At least 19 recordsLinked to original sources

arXiv2023

Apertif 1.4 GHz continuum observations of the Boötes field and their combined view with LOFAR

We present a new image of a 26.5 square degree region in the Boötes constellation obtained at 1.4 GHz using the Aperture Tile in Focus (Apertif) system on the Westerbork Synthesis Radio Telescope. We use a newly developed processing pipeline which includes direction-dependent self-calibration which provides a significant improvement of the quality of the images compared to those released as part of the Apertif first data release. For the Boötes region, we mosaic 187 Apertif images and extract a source catalog. The mosaic image has an angular resolution of 27${\times}$11.5 arcseconds and a median background noise of 40 $μ$Jy/beam. The catalog has 8994 sources and is complete down to the 0.3 mJy level. We combine the Apertif image with LOFAR images of the Boötes field at 54 and 150 MHz to study spectral properties of the sources. We find a spectral flattening towards low flux density sources. Using the spectral index limits from Apertif non-detections we derive that up to 9 percent of the sources have ultra-steep spectra with a slope steeper than -1.2. Steepening of the spectral index with increasing redshift is also seen in the data showing a different dependency for the low-frequency spectral index and the high frequency one. This can be explained by a population of sources having concave radio spectra with a turnover frequency around the LOFAR band. Additionally, we discuss cases of individual extended sources with an interesting resolved spectral structure. With the improved pipeline, we aim to continue processing data from the Apertif wide-area surveys and release the improved 1.4 GHz images of several famous fields.

astro-ph.IM↗

arXiv2022

First release of Apertif imaging survey data

(Abridged) Apertif is a phased-array feed system for WSRT, providing forty instantaneous beams over 300 MHz of bandwidth. A dedicated survey program started on 1 July 2019, with the last observations taken on 28 February 2022. We describe the release of data products from the first year of survey operations, through 30 June 2020. We focus on defining quality control metrics for the processed data products. The Apertif imaging pipeline, Apercal, automatically produces non-primary beam corrected continuum images, polarization images and cubes, and uncleaned spectral line and dirty beam cubes for each beam of an Apertif imaging observation. For this release, processed data products are considered on a beam-by-beam basis within an observation. We validate the continuum images by using metrics that identify deviations from Gaussian noise in the residual images. If the continuum image passes validation, we release all processed data products for a given beam. We apply further validation to the polarization and line data products. We release all raw observational data from the first year of survey observations, for a total of 221 observations of 160 independent target fields, covering approximately one thousand square degrees of sky. Images and cubes are released on a per beam basis, and 3374 beams are released. The median noise in the continuum images is 41.4 uJy/bm, with a slightly lower median noise of 36.9 uJy/bm in the Stokes V polarization image. The median angular resolution is 11.6"/sin(Dec). The median noise for all line cubes, with a spectral resolution of 36.6 kHz, is 1.6 mJy/bm, corresponding to a 3-sigma HI column density sensitivity of 1.8 x 10^20 atoms cm^-2 over 20 km/s (for a median angular resolution of 24" x 15"). We also provide primary beam images for each individual Apertif compound beam. The data are made accessible using a Virtual Observatory interface.

astro-ph.IM↗

arXiv2022

Continuum source catalog for the first APERTIF data release

The first data release of Apertif survey contains 3074 radio continuum images covering a thousand square degrees of the sky. The observations were performed during August 2019 to July 2020. The continuum images were produced at a central frequency 1355 MHz with the bandwidth of $\sim$150 MHz and angular resolution reaching 10". In this work we introduce and apply a new method to obtain a primary beam model using a machine learning approach, Gaussian process regression. The primary beam models obtained with this method are published along with the data products for the first Apertif data release. We apply the method to the continuum images, mosaic them and extract the source catalog. The catalog contains 249672 radio sources many of which are detected for the first time at these frequencies. We cross-match the coordinates with the NVSS, LOFAR/DR1/value-added and LOFAR/DR2 catalogs resulting in 44523, 22825 and 152824 common sources respectively. The first sample provides a unique opportunity to detect long term transient sources which have significantly changed their flux density for the last 25 years. The second and the third ones combined together provide information about spectral properties of the sources as well as the redshift estimates.

astro-ph.IM↗

arXiv2022

Characterising the Apertif primary beam response

Context. Phased Array Feeds (PAFs) are multi element receivers in the focal plane of a telescope that make it possible to form simultaneously multiple beams on the sky by combining the complex gains of the individual antenna elements. Recently the Westerbork Synthesis Radio Telescope (WSRT) was upgraded with PAF receivers and carried out several observing programs including two imaging surveys and a time domain survey. The Apertif imaging surveys use a configuration, where 40 partially overlapping compound beams (CBs) are simultaneously formed on the sky and arranged in an approximately rectangular shape. Aims. This manuscript aims to characterise the response of the 40 Apertif CBs to create frequency-resolved, I, XX and YY polarization empirical beam shapes. The measured CB maps can be used for image deconvolution, primary beam correction and mosaicing of Apertif imaging data. Methods. We use drift scan measurements to measure the response of each of the 40 CBs of Apertif. We derive beam maps for all individual beams in I, XX and YY polarisation in 10 or 18 frequency bins over the same bandwidth as the Apertif imaging surveys. We sample the main lobe of the beams and the side lobes up to a radius of 0.6 degrees from the beam centres. In addition, we derive beam maps for each individual WSRT dish as well. Results. We present the frequency and time dependence of the beam shapes and sizes. We compare the compound beam shapes derived with the drift scan method to beam shapes derived with an independent method using a Gaussian Process Regression comparison between the Apertif continuum images and the NRAO VLA Sky Survey (NVSS) catalogue. We find a good agreement between the beam shapes derived with the two independent methods.

astro-ph.IM↗

arXiv2021

Apercal -- The Apertif Calibration Pipeline

Apertif (APERture Tile In Focus) is one of the Square Kilometre Array (SKA) pathfinder facilities. The Apertif project is an upgrade to the 50-year-old Westerbork Synthesis Radio Telescope (WSRT) using phased-array feed technology. The new receivers create 40 individual beams on the sky, achieving an instantaneous sky coverage of 6.5 square degrees. The primary goal of the Apertif Imaging Survey is to perform a wide survey of 3500 square degrees (AWES) and a medium deep survey of 350 square degrees (AMES) of neutral atomic hydrogen (up to a redshift of 0.26), radio continuum emission and polarisation. Each survey pointing yields 4.6 TB of correlated data. The goal of Apercal is to process this data and fully automatically generate science ready data products for the astronomical community while keeping up with the survey observations. We make use of common astronomical software packages in combination with Python based routines and parallelisation. We use an object oriented module-based approach to ensure easy adaptation of the pipeline. A Jupyter notebook based framework allows user interaction and execution of individual modules as well as a full automatic processing of a complete survey observation. If nothing interrupts processing, we are able to reduce a single pointing survey observation on our five node cluster with 24 physical cores and 256 GB of memory each within 24h keeping up with the speed of the surveys. The quality of the generated images is sufficient for scientific usage for 44 % of the recorded data products with single images reaching dynamic ranges of several thousands. Future improvements will increase this percentage to over 80 %. Our design allowed development of the pipeline in parallel to the commissioning of the Apertif system.

astro-ph.IM↗

arXiv2021

The Aperture Array Verification System 1: System overview and early commissioning results

The design and development process for the Square Kilometre Array (SKA) radio telescope, the Low Frequency Aperture Array component, was progressed during the SKA pre-construction phase by an international consortium, with the goal of meeting requirements for a critical design review. As part of the development process a full-sized prototype SKA Low station was deployed, the Aperture Array Verification System 1 (AAVS1). We provide a system overview and describe the commissioning results of AAVS1, which is a low frequency radio telescope with 256 dual-polarisation log-periodic dipole antennas working as a phased array. A detailed system description is provided, including an in-depth overview of relevant sub-systems, ranging from hardware, firmware, software, calibration,and control sub-systems. Early commissioning results cover initial bootstrapping, array calibration, stability testing, beam-forming,and on-sky sensitivity validation. Lessons learned are presented, along with future developments.

astro-ph.IM↗

arXiv2021

Fourier-domain dedispersion

We present and implement the concept of the Fourier-domain dedispersion (FDD) algorithm, a brute-force incoherent dedispersion algorithm. This algorithm corrects the frequency-dependent dispersion delays in the arrival time of radio emission from sources such as radio pulsars and fast radio bursts. Where traditional time-domain dedispersion algorithms correct time delays using time shifts, the FDD algorithm performs these shifts by applying phase rotations to the Fourier-transformed time-series data. Incoherent dedispersion to many trial dispersion measures (DMs) is compute, memory-bandwidth and I/O intensive and dedispersion algorithms have been implemented on Graphics Processing Units (GPUs) to achieve high computational performance. However, time-domain dedispersion algorithms have low arithmetic intensity and are therefore often memory-bandwidth limited. The FDD algorithm avoids this limitation and is compute limited, providing a path to exploit the potential of current and upcoming generations of GPUs. We implement the FDD algorithm as an extension of the DEDISP time-domain dedispersion software. We compare the performance and energy-to-completion of the FDD implementation using an NVIDIA Titan RTX GPU against the standard as well as an optimized version of DEDISP. The optimized implementation already provides a factor of 1.5 to 2 speedup at only 66% of the energy utilization compared to the original algorithm. We find that the FDD algorithm outperforms the optimized time-domain dedispersion algorithm by another 20% in performance and 5% in energy-to-completion when a large number of DMs (>=512) are required. The FDD algorithm provides additional performance improvements for FFT-based periodicity surveys of radio pulsars, as the FFT back to the time domain can be omitted. We expect that this computational performance gain will further improve in the future.

astro-ph.IM↗

arXiv2021

Apertif, Phased Array Feeds for the Westerbork Synthesis Radio Telescope

We describe the APERture Tile In Focus (Apertif) system, a phased array feed (PAF) upgrade of the Westerbork Synthesis Radio Telescope which has transformed this telescope into a high-sensitivity, wide field-of-view L-band imaging and transient survey instrument. Using novel PAF technology, up to 40 partially overlapping beams can be formed on the sky simultaneously, significantly increasing the survey speed of the telescope. With this upgraded instrument, an imaging survey covering an area of 2300 deg2 is being performed which will deliver both continuum and spectral line data sets, of which the first data has been publicly released. In addition, a time domain transient and pulsar survey covering 15,000 deg2 is in progress. An overview of the Apertif science drivers, hardware and software of the upgraded telescope is presented, along with its key performance characteristics.

astro-ph.IM↗

arXiv2021

Sub-arcsecond imaging with the International LOFAR Telescope I. Foundational calibration strategy and pipeline

[abridged] The International LOFAR Telescope is an interferometer with stations spread across Europe. With baselines of up to ~2,000 km, LOFAR has the unique capability of achieving sub-arcsecond resolution at frequencies below 200 MHz, although this is technically and logistically challenging. Here we present a calibration strategy that builds on previous high-resolution work with LOFAR. We give an overview of the calibration strategy and discuss the special challenges inherent to enacting high-resolution imaging with LOFAR, and describe the pipeline, which is publicly available, in detail. We demonstrate the calibration strategy by using the pipeline on P205+55, a typical LOFAR Two-metre Sky Survey (LoTSS) pointing. We perform in-field delay calibration, solution referencing to other calibrators, self-calibration, and imaging of example directions of interest in the field. For this specific field and these ionospheric conditions, dispersive delay solutions can be transferred between calibrators up to ~1.5 degrees away, while phase solution transferral works well over 1 degree. We demonstrate a check of the astrometry and flux density scale. Imaging in 17 directions, the restoring beam is typically 0.3" x 0.2" although this varies slightly over the entire 5 square degree field of view. We achieve ~80 to 300 $μ$Jy/bm image rms noise, which is dependent on the distance from the phase centre; typical values are ~90 $μ$Jy/bm for the 8 hour observation with 48 MHz of bandwidth. Seventy percent of processed sources are detected, and from this we estimate that we should be able to image ~900 sources per LoTSS pointing. This equates to ~3 million sources in the northern sky, which LoTSS will entirely cover in the next several years. Future optimisation of the calibration strategy for efficient post-processing of LoTSS at high resolution (LoTSS-HR) makes this estimate a lower limit.

astro-ph.IM↗

arXiv2021

Apertif view of the OH Megamaser IRAS 10597+5926: OH 18 cm satellite lines in wide-area HI surveys

We present the serendipitous detection of the two main OH maser lines at 1667 and 1665 MHz associated with IRAS 10597+5926 at z = 0.19612 in the untargeted Apertif Wide-area Extragalactic Survey (AWES), and the subsequent measurement of the OH 1612 MHz satellite line in the same source. With a total OH luminosity of log(L/L_Sun) = 3.90 +/- 0.03, IRAS 10597+5926 is the fourth brightest OH megamaser (OHM) known. We measure a lower limit for the 1667/1612 ratio of R_1612 > 45.9 which is the highest limiting ratio measured for the 1612 MHz OH satellite line to date. OH satellite line measurements provide a potentially valuable constraint by which to compare detailed models of OH maser pumping mechanisms. Optical imaging shows the galaxy is likely a late-stage merger. Based on published infrared and far ultraviolet fluxes, we find that the galaxy is an ultra luminous infrared galaxy (ULIRG) with log(L_TIR/L_Sun) = 12.24, undergoing a star burst with an estimated star formation rate of 179 +/- 40 M_Sun/yr. These host galaxy properties are consistent with the physical conditions responsible for very bright OHM emission. Finally, we provide an update on the predicted number of OH masers that may be found in AWES, and estimate the total number of OH masers that will be detected in each of the individual main and satellite OH 18 cm lines.

astro-ph.GA↗

arXiv2020

A bright, high rotation-measure FRB that skewers the M33 halo

We report the detection of a bright fast radio burst, FRB\,191108, with Apertif on the Westerbork Synthesis Radio Telescope (WSRT). The interferometer allows us to localise the FRB to a narrow $5\arcsec\times7\arcmin$ ellipse by employing both multibeam information within the Apertif phased-array feed (PAF) beam pattern, and across different tied-array beams. The resulting sight line passes close to Local Group galaxy M33, with an impact parameter of only 18\,kpc with respect to the core. It also traverses the much larger circumgalactic medium of M31, the Andromeda Galaxy. We find that the shared plasma of the Local Group galaxies could contribute $\sim$10\% of its dispersion measure of 588\,pc\,cm$^{-3}$. FRB\,191108 has a Faraday rotation measure of +474\,$\pm\,3$\,rad\,m$^{-2}$, which is too large to be explained by either the Milky Way or the intergalactic medium. Based on the more moderate RMs of other extragalactic sources that traverse the halo of M33, we conclude that the dense magnetised plasma resides in the host galaxy. The FRB exhibits frequency structure on two scales, one that is consistent with quenched Galactic scintillation and broader spectral structure with $Δν\approx40$\,MHz. If the latter is due to scattering in the shared M33/M31 CGM, our results constrain the Local Group plasma environment. We found no accompanying persistent radio sources in the Apertif imaging survey data.

astro-ph.HE↗

arXiv2020

Extreme intra-hour variability of the radio source J1402+5347 discovered with Apertif

The propagation of radio waves from distant compact radio sources through turbulent interstellar plasma in our Galaxy causes these sources to twinkle, a phenomenon called interstellar scintillation. Such scintillations are a unique probe of the micro-arcsecond structure of radio sources as well as of the sub-AU-scale structure of the Galactic interstellar medium. Weak scintillations (i.e. an intensity modulation of a few percent) on timescales of a few days or longer are commonly seen at centimetre wavelengths and are thought to result from the line-of-sight integrated turbulence in the interstellar plasma of the Milky Way. So far, only three sources were known that show more extreme variations, with modulations at the level of some dozen percent on timescales shorter than an hour. This requires propagation through nearby (d <~10 pc) anomalously dense (n_e ~10^2 cm^-3) plasma clouds. Here we report the discovery with Apertif of a source (J1402+5347) showing extreme (~50%) and rapid variations on a timescale of just 6.5 minutes in the decimetre band (1.4 GHz). The spatial scintillation pattern is highly anisotropic, with a semi-minor axis of about 20,000 km. The canonical theory of refractive scintillation constrains the scattering plasma to be within the Oort cloud. The sightline to J1402+5347, however, passes unusually close to the B3 star Alkaid (eta UMa) at a distance of 32 pc. If the scintillations are associated with Alkaid, then the angular size of J1402+5347 along the minor axis of the scintels must be smaller than ~10 micro arcsec yielding an apparent brightness temperature for an isotropic source of >~ 10^ 14K. }

astro-ph.GA↗

arXiv2020

Repeating fast radio bursts with WSRT/Apertif

Repeating fast radio bursts (FRBs) present excellent opportunities to identify FRB progenitors and host environments, as well as decipher the underlying emission mechanism. Detailed studies of repeating FRBs might also hold clues to the origin of FRBs as a population. We aim to detect the first two repeating FRBs: FRB 121102 (R1) and FRB 180814.J0422+73 (R2), and characterise their repeat statistics. We also want to significantly improve the sky localisation of R2. We use the Westerbork Synthesis Radio Telescope to conduct extensive follow-up of these two repeating FRBs. The new phased-array feed system, Apertif, allows covering the entire sky position uncertainty of R2 with fine spatial resolution in one pointing. We characterise the energy distribution and the clustering of detected R1 bursts. We detected 30 bursts from R1. Our measurements indicate a dispersion measure of 563.5(2) pc cm$^{-3}$, suggesting a significant increase in DM over the past few years. We place an upper limit of 8% on the linear polarisation fraction of the brightest burst. We did not detect any bursts from R2. A single power-law might not fit the R1 burst energy distribution across the full energy range or widely separated detections. Our observations provide improved constraints on the clustering of R1 bursts. Our stringent upper limits on the linear polarisation fraction imply a significant depolarisation, either intrinsic to the emission mechanism or caused by the intervening medium, at 1400 MHz that is not observed at higher frequencies. The non-detection of any bursts from R2 implies either a highly clustered nature of the bursts, a steep spectral index, or a combination of both. Alternatively, R2 has turned off completely, either permanently or for an extended period of time.

astro-ph.HE↗

arXiv2018

Baseline Dependent Averaging in Radio Interferometry

This paper presents a detailed analysis of the applicability and benefits of baseline dependent averaging (BDA) in modern radio interferometers and in particular the Square Kilometre Array (SKA). We demonstrate that BDA does not affect the information content of the data other than a well-defined decorrelation loss for which closed form expressions are readily available. We verify these theoretical findings using simulations. We therefore conclude that BDA can be used reliably in modern radio interferometry allowing a reduction of visibility data volume (and hence processing costs for handling visibility data) by more than 80%.

astro-ph.IM↗

arXiv2017

Upper limits on the 21-cm Epoch of Reionization power spectrum from one night with LOFAR

We present the first limits on the Epoch of Reionization (EoR) 21-cm HI power spectra, in the redshift range $z=7.9-10.6$, using the Low-Frequency Array (LOFAR) High-Band Antenna (HBA). In total 13\,h of data were used from observations centred on the North Celestial Pole (NCP). After subtraction of the sky model and the noise bias, we detect a non-zero $Δ^2_{\rm I} = (56 \pm 13 {\rm mK})^2$ (1-$σ$) excess variance and a best 2-$σ$ upper limit of $Δ^2_{\rm 21} < (79.6 {\rm mK})^2$ at $k=0.053$$h$cMpc$^{-1}$ in the range $z=$9.6-10.6. The excess variance decreases when optimizing the smoothness of the direction- and frequency-dependent gain calibration, and with increasing the completeness of the sky model. It is likely caused by (i) residual side-lobe noise on calibration baselines, (ii) leverage due to non-linear effects, (iii) noise and ionosphere-induced gain errors, or a combination thereof. Further analyses of the excess variance will be discussed in forthcoming publications.

astro-ph.CO↗

arXiv2016

Calibration artefacts in radio interferometry. III. Phase-only calibration and primary beam correction

This is the third installment in a series of papers in which we investigate calibration artefacts. Calibration artefacts (also known as ghosts or spurious sources) are created when we calibrate with an incomplete model. In the first two papers of this series we developed a mathematical framework which enabled us to study the ghosting mechanism itself. An interesting concomitant of the second paper was that ghosts appear in symmetrical pairs. This could possibly account for spurious symmetrization. Spurious symmetrization refers to the appearance of a spurious source (the anti-ghost) symmetrically opposite an unmodelled source around a modelled source. The analysis in the first two papers indicates that the anti-ghost is usually very faint, in particular when a large number of antennas are used. This suggests that spurious symmetrization will mainly occur at an almost undetectable flux level. In this paper, we show that phase-only calibration produces an anti-ghost that is $N$-times (where $N$ denotes the number of antennas in the array) as bright as the one produced by phase and amplitude calibration and that this already bright ghost can be further amplified by the primary beam correction.

astro-ph.IM↗

arXiv2016

A large light-mass component of cosmic rays at 10^{17} - 10^{17.5} eV from radio observations

Cosmic rays are the highest energy particles found in nature. Measurements of the mass composition of cosmic rays between 10^{17} eV and 10^{18} eV are essential to understand whether this energy range is dominated by Galactic or extragalactic sources. It has also been proposed that the astrophysical neutrino signal comes from accelerators capable of producing cosmic rays of these energies. Cosmic rays initiate cascades of secondary particles (air showers) in the atmosphere and their masses are inferred from measurements of the atmospheric depth of the shower maximum, Xmax, or the composition of shower particles reaching the ground. Current measurements suffer from either low precision, or a low duty cycle and a high energy threshold. Radio detection of cosmic rays is a rapidly developing technique, suitable for determination of Xmax with a duty cycle of in principle nearly 100%. The radiation is generated by the separation of relativistic charged particles in the geomagnetic field and a negative charge excess in the shower front. Here we report radio measurements of Xmax with a mean precision of 16 g/cm^2 between 10^{17}-10^{17.5} eV. Because of the high resolution in $Xmax we can determine the mass spectrum and find a mixed composition, containing a light mass fraction of ~80%. Unless the extragalactic component becomes significant already below 10^{17.5} eV, our measurements indicate an additional Galactic component dominating at this energy range.

astro-ph.HE↗

arXiv2015

Calibrating the absolute amplitude scale for air showers measured at LOFAR

Air showers induced by cosmic rays create nanosecond pulses detectable at radio frequencies. These pulses have been measured successfully in the past few years at the LOw Frequency ARray (LOFAR) and are used to study the properties of cosmic rays. For a complete understanding of this phenomenon and the underlying physical processes, an absolute calibration of the detecting antenna system is needed. We present three approaches that were used to check and improve the antenna model of LOFAR and to provide an absolute calibration of the whole system for air shower measurements. Two methods are based on calibrated reference sources and one on a calibration approach using the diffuse radio emission of the Galaxy, optimized for short data-sets. An accuracy of 19% in amplitude is reached. The absolute calibration is also compared to predictions from air shower simulations. These results are used to set an absolute energy scale for air shower measurements and can be used as a basis for an absolute scale for the measurement of astronomical transients with LOFAR.

astro-ph.IM↗