Searcharxiv⌕ Search

arXiv subjects

S. Karaali

Publications and source records attributed to S. Karaali.

At least 37 records · Page 2Linked to original sources

Absolute Magnitude Calibration for Red Giants based on the Colour-Magnitude Diagrams of Galactic Clusters. III-Calibration with 2MASS

We present two absolute magnitude calibrations, $M_{J}$ and $M_{K_s}$, for red giants with the colour magnitude diagrams of five Galactic clusters with different metallicities i.e. M92, M13, M71, M67, and NGC 6791. The combination of the absolute magnitudes of the red giant sequences with the corresponding metallicities provides calibration for absolute magnitude estimation for red giants for a given colour. The calibrations for $M_{J}$ and $M_{K_s}$ are defined in the colour intervals $1.3\leq(V-J)_{0}\leq2.8$ and $1.75 \leq (V-K_{s})_{0}\leq 3.80$ mag, respectively, and they cover the metallicity interval $-2.15 \leq \lbrack Fe/H \rbrack \leq +0.37$ dex. The absolute magnitude residuals obtained by the application of the procedure to another set of Galactic clusters lie in the intervals $-0.08<ΔM_{J}\leq +0.34$ and $-0.10< ΔM_{K_s}\leq +0.27$ mag for $M_{J}$ and $M_{K_s}$, respectively. The means and standard deviations of the residuals are $<ΔM_{J}>= 0.137$ and $σ_{M_J}=0.080$, and $<ΔM_{K_s}>=0.109$ and $σ_{M_{K_{s}}}=0.123$ mag. The derived relations are applicable to stars older than 4 Gyr, the age of the youngest calibrating cluster.

astro-ph.GA↗

Absolute Magnitude Calibration for Giants based on the Colour-Magnitude Diagrams of Galactic Clusters. II-Calibration with SDSS

We present an absolute magnitude calibration for red giants with the colour magnitude diagrams of six Galactic clusters with different metallicities i.e. M92, M13, M3, M71, NGC 6791 and NGC 2158. The combination of the absolute magnitudes of the red giant sequences with the corresponding metallicities provides calibration for absolute magnitude estimation for red giants for a given $(g-r)_{0}$ colour. The calibration is defined in the colour interval 0.45 $\leq(g-r)_{0}\leq$ 1.30 mag and it covers the metallicity interval $-2.15\leq \lbrack Fe/H \rbrack \leq$ +0.37 dex. The absolute magnitude residuals obtained by the application of the procedure to another set of Galactic clusters lie in the interval $-0.28< ΔM \leq +0.43$ mag. However, the range of 94% of the residuals is shorter, $-0.1<ΔM \leq+0.4$ mag. The mean and the standard deviation of (all) residuals are 0.169 and 0.140 mag, respectively. The derived relations are applicable to stars older than 2 Gyr, the age of the youngest calibrating cluster.

astro-ph.GA↗

Absolute Magnitude Calibration for Red Giants based on the Colour-Magnitude Diagrams of Galactic Clusters. I- Calibration with V and (B-V)

We present an absolute magnitude calibration for red giants with the colour magnitude diagrams of six Galactic clusters with different metallicities i.e. M92, M13, M5, 47 Tuc, M67, and NGC 6791. The combination of the absolute magnitude offset from the fiducial of giant sequence of the cluster M5 with the corresponding metallicity offset provides calibration for absolute magnitude estimation for red giants for a given (B-V)o colour. The calibration is defined in the colour interval 0.75<=(B-V)o<=1.50 mag and it covers the metallicity interval -2.15<[Fe/H]<=+0.37 dex. 91% of the absolute magnitude residuals obtained by the application of the procedure to another set of Galactic clusters lie in the interval -0.40<ΔM<=+0.40 mag. The mean and the standard deviation of the residuals are 0.05 and 0.19 mag, respectively. We fitted the absolute magnitude also to metallicity and age for a limited sub-sample of (B-V)o colour, just to test the effect of age in absolute magnitude calibration. Comparison of the mean and the standard deviation of the residuals evaluated by this procedure with the corresponding ones provided by the procedure where the absolute magnitude fitted to a third degree polynomial of metallicity show that the age parameter may be omitted in absolute magnitude estimation of red giants. The derived relations are applicable to stars older than 4 Gyr, the age of the youngest calibrating cluster.

astro-ph.GA↗

Transformations between WISE and 2MASS, SDSS, BVI photometric systems: II. Transformation equations for red clump stars

We present colour transformations for the conversion of the Wide-Field Survey Explorer (WISE) W1, W2, and W3 magnitudes to the Johnson-Cousins (BVIc), Sloan Digital Sky Survey (gri), and Two Micron All Sky Survey JHKs photometric systems, for red clump (RC) stars. RC stars were selected from the Third Radial Velocity Experiment (RAVE) Data Release (DR3). The apparent magnitudes were collected by matching the coordinates of this sample with different photometric catalogues. The final sample (355 RC stars) used to obtain metallicity dependent-and free of metallicity- transformations between WISE and Johnson-Cousins, SDSS, 2MASS photometric systems. These transformations combined with known absolute magnitudes at shorter wavelengths can be used in space density determinations for the Galactic (thin and thick) discs at distances larger than the ones evaluated with JHKs photometry alone, hence providing a powerful tool in the analysis of Galactic structure.

astro-ph.GA↗

Local stellar kinematics from RAVE data: III. Radial and Vertical Metallicity Gradients based on Red Clump Stars

We investigate radial and vertical metallicity gradients for a sample of red clump stars from the RAdial Velocity Experiment (RAVE) Data Release 3. We select a total of 6781 stars, using a selection of colour, surface gravity and uncertainty in the derived space motion, and calculate for each star a probabilistic (kinematic) population assignment to a thin or thick disc using space motion and additionally another (dynamical) assignment using stellar vertical orbital eccentricity. We derive almost equal metallicity gradients as a function of Galactocentric distance for the high probability thin disc stars and for stars with vertical orbital eccentricities consistent with being dynamically young, e_v<=0.07, i.e. d[M/H]/dR_m = -0.041(0.003) and d[M/H]/dR_m = -0.041(0.007) dex/kpc. Metallicity gradients as a function of distance from the Galactic plane for the same populations are steeper, i.e. d[M/H]/dz_{max} = -0.109(0.008) and d[M/H]/dz_{max} = -0.260(0.031) dex/kpc, respectively. R_m and z_{max} are the arithmetic mean of the perigalactic and apogalactic distances, and the maximum distance to the Galactic plane, respectively. Samples including more thick disc red clump giant stars show systematically shallower abundance gradients. These findings can be used to distinguish between different formation scenarios of the thick and thin discs.

astro-ph.GA↗

Local stellar kinematics from RAVE data: II. Radial Metallicity Gradient

We investigate radial metallicity gradients for a sample of dwarf stars from the RAdial Velocity Experiment (RAVE) Data Release 3 (DR3). We select a total of approximately 17000 F-type and G-type dwarfs using selection of colour, log g, and uncertainty on derived space motion, calculate for each star a probabilistic (kinematic) population assignment to thick or thin disc using space motion, and additionally another (dynamical) assignment using stellar vertical orbital eccentricity. We additionally subsample by colour, to provide samples biased to young thin disc and to older thin disc stars. We derive a metallicity gradient as a function of Galactocentric radial distance, i.e. d[M/H]/dR_m=-0.051+/-0.005 dex kpc^-1, for the youngest sample, F-type stars with vertical orbital eccentricities e_V<=0.04. Samples biased to older thin disc stars show systematically shallower abundance gradients.

astro-ph.GA↗

Identification of field dwarfs and giants in RAVE

The second RAdial Velocity Experiment (RAVE) Data Release (DR2) derives log g values but we present a simpler and cleaner method of identifying dwarfs and giants using only magnitudes, which does not require spectroscopic analysis. We confirm the Bilir et al. (2006) procedure which estimates the number of dwarfs and giants via their positions in the J-V two magnitude diagram by applying it to RAVE DR2. It is effective in estimating the number of dwarfs and giants at J-H>0.4 compared to RAVE's log g values. For J-H<=0.4, where dwarfs and subgiants show a continuous transition in the J magnitude histogram, we used the Besancon Galaxy model predictions to statistically isolate giants. The percentages of giants for red stars and for the whole sample are 85% and 34%, respectively. If we add the subgiants, the percentage of evolved stars for the whole sample raises to 59%. For the first time in the literature, we analysed the effect of CHISQ on RAVE's log g values (CHISQ is the penalised chi^2 from RAVE's technique of finding an optimal match between the observed spectrum and synthetic spectra to derive stellar parameters). Neither the CHISQ values nor the signal-to-noise ratio bias RAVE log g values. Therefore the method of identifying dwarfs and giants via the two magnitude diagram has been verified against an unbiased dataset.

astro-ph.GA↗

Transformations between WISE, 2MASS, SDSS and BVRI photometric systems: I. Transformation equations for dwarfs

We present colour transformations for the conversion of the W1 and W2 magnitudes of WISE photometric system to the Johnson-Cousins' BVRI, SDSS (gri), and 2MASS (JHK_s) photometric systems, for dwarfs. The W3 and W4 magnitudes were not considered due to their insufficient signal to noise ratio (S/N). The coordinates of 825 dwarfs along with their BVRI, gri, and JHK_s data, taken from Bilir et al. (2008) were matched with the coordinates of stars in the preliminary data release of WISE (Wright et al., 2010) and a homogeneous dwarf sample with high S/N ratio have been obtained using the following constraints: 1) the data were dereddened, 2) giants were identified and excluded from the sample, 3) sample stars were selected according to data quality, 4) transformations were derived for sub samples of different metallicity range, and 5) transformations are two colour dependent. These colour transformations, coupled with known absolute magnitudes at shorter wavelenghts, can be used in space density evaluation for the Galactic (thin and thick) discs, at distances larger than the ones evaluated with JHK_s photometry.

astro-ph.GA↗

An Improved Metallicity Calibration with UBV Photometry

We used the data of 701 stars covering the colour index interval 0.32<B-V<=1.16, with metallicities -1.76<=[Fe/H]<=+0.40 dex, which were taken from PASTEL catalogue and estimated metallicity dependent guillotine factors which provide a more accurate metallicity calibration. We reduced the metallicities of 11 authors to the metallicities of Valenti & Fischer (2005), thus obtained a homogeneous set of data which increased the accuracy of the calibration, i.e. [Fe/H]=-14.316*delta^{2}_{0.6}-3.557*delta_{0.6}+0.105. Comparison of the metallicity residuals, for two sets of data, based on the metallicity dependent guillotine factors with the ones obtained via metal free guillotine factors, shows that metallicities estimated by means of new guillotine factors are more accurate than the other ones. This advantage can be used in the metallicity gradient investigation of the Galactic components, i.e. thin disc, thick disc and halo.

astro-ph.GA↗

Local Stellar Kinematics from RAVE Data: I. Local Standard of Rest

We analyze a sample of 82850 stars from the RAVE survey, with well-determined velocities and stellar parameters, to isolate a sample of 18026 high-probability thin-disc dwarfs within 600 pc of the Sun. We derive space motions for these stars, and deduce the solar space velocity with respect to the Local Standard of Rest. The peculiar solar motion we derive is in excellent agreement in radial $U_{\odot}$ and vertical $W_{\odot}$ peculiar motions with other recent determinations. Our derived tangential peculiar velocity, $V_{\odot}$ agrees with very recent determinations, which favour values near 13 km s$^{-1}$, in disagreement with earlier studies. The derived values are not significantly dependent on the comparison sample chosen, or on the method of analysis. The local galaxy seems very well dynamically relaxed, in a near symmetric potential.

astro-ph.GA↗

Transformations between 2MASS, SDSS and BVI photometric systems for late-type giants

We present colour transformations from Two Micron All Sky Survey (2MASS) photometric system to Johnson-Cousins system and to Sloan Digital Sky Survey (SDSS) system for late-type giants and vice versa. The giant star sample was formed using surface gravity constraints ($2 < \log g \leq 3$) to Cayrel de Strobel et al.\rq s (2001) spectroscopic catalogue. 2MASS, SDSS and Johnson-Cousins photometric data was taken from Cutri et al. (2003), Ofek (2008) and van Leeuwen (2007), respectively. The final sample was refined applying the following steps: (1) the data were dereddened, (2) the sample stars selected are of the highest photometric quality. We give two--colour dependent transformations as a function of metallicity as well as independent of metallicity. The transformations provide absolute magnitudes and distance determinations which can be used in space density evaluations at relatively short distances where some or all of the SDSS magnitudes of late-type giants are saturated.

astro-ph.SR↗

A Universal Vertical Stellar Density Distribution Law for the Galaxy

We reduced the observational logarithmic space densities in the vertical direction up to 8 kpc from the galactic plane, for stars with absolute magnitudes (5,6], (6,7] and [5,10] in the fields $#$0952+5245 and SA114, to a single exponential density law. One of three parameters in the quadratic expression of the density law corresponds to the local space density for stars with absolute magnitudes in question. There is no need of any definition for scaleheights or population types. We confirm with the arguments of non-discrete thin and thick discs for our Galaxy and propose a single structure up to several kiloparsecs from the galactic plane. The logarithmic space densities evaluated by this law for the ELAIS field fit to the observational ones. Whereas, there are considerable offsets for the logarithmic space densities produced by two sets of classical galactic model parameters from the observational ones, for the same field.

astro-ph.GA↗

Estimation of Galactic Model Parameters and Metalicity Distribution in Intermediate Latitudes with SDSS

We estimated the galactic model parameters for a set of 20 intermediate-latitude fields with galactic longitudes 0 =6.52% and <(n_{3}/n_{1})>=0.35%, respectively, a result different than the one cited for high-latitude fields. The thin disc's scaleheight is 325 pc in the galactic centre changes to 369 pc in the third quadrant, which confirms the existence of disc flare, whereas the thick disc scaleheight is as large as 952 pc at galactic longitude l=20 and 10% lower at l=160, which confirms the existence of the disc long bar in the direction l=27. Finally, the variation of the axis ratio of the halo with galactic longitude is almost flat, <(c/a)>=0.56, except a slight minimum and a small maximum in the second and third quadrants, respectively, indicating an effect of the long bar which seems plausible for a shallow halo. We estimated the metallicities of unevolved G-type stars and discussed the metallicity gradient for different vertical distances. The metallicity gradient is d[M/H]/dz=-0.30 dex kpc$^{-1}$ for short distances, confirming the formation of this region of the Galaxy by dissipational collapse. However, its change is steeper in the transition regions of different galactic components. The metallicity gradient is almost zero for inner halo (5<z<10 kpc), indicating a formation of merger or accretion of numerous fragments such as dwarf galaxies.

astro-ph.GA↗

SDSS Absolute Magnitudes for Thin Disc Stars based on Trigonometric Parallaxes

We present a new luminosity-colour relation based on trigonometric parallaxes for thin disc main-sequence stars in SDSS photometry. We matched stars from the newly reduced Hipparcos catalogue with the ones taken from 2MASS All-Sky Catalogue of Point Sources, and applied a series of constraints, i.e. relative parallax errors ($σ_π/π\leq0.05$), metallicity ($-0.30\leq[M/H]\leq0.20$ dex), age ($0\leq t \leq 10$ Gyr) and surface gravity ($\log g>4$), and obtained a sample of thin disc main-sequence stars. Then, we used our previous transformation equations (Bilir et al. 2008a) between SDSS and 2MASS photometries and calibrated the $M_{g}$ absolute magnitudes to the $(g-r)_{0}$ and $(r-i)_0$ colours. The transformation formulae between 2MASS and SDSS photometries along with the absolute magnitude calibration provide space densities for bright stars which saturate the SDSS magnitudes.

astro-ph.GA↗

Luminosity-Colours relations for thin disc main-sequence stars

In this study we present the absolute magnitude calibrations of thin disc main-sequence stars in the optical ($M_{V}$), and in the near-infrared ($M_{J}$). Thin disc stars are identified by means of Padova isochrones, and absolute magnitudes for the sample are evaluated via the newly reduced Hipparcos data. The obtained calibrations cover a large range of spectral types: from A0 to M4 in the optical and from A0 to M0 in the near-infrared. Also, we discuss the of effects binary stars and evolved stars on the absolute magnitude calibrations. The usage of these calibrations can be extended to the estimation of galactic model parameters for the thin disc individually, in order to compare these parameters with the corresponding ones estimated by $χ{^2}_{min}$ statistics (which provides galactic model parameters for thin and thick discs, and halo simultaneously) to test any degeneracy between them. The calibrations can also be used in other astrophysical researches where distance plays an important role in that study.

astro-ph↗

Estimation of galactic model parameters in high latitudes with SDSS

We estimated the Galactic model parameters for a set of 36 high-latitude fields included in the currently available Data Release 5 (DR 5) of the Sloan Digital Sky Survey ({\em SDSS}), to explore their possible variation with the Galactic longitude. The thick disc scaleheight moves from $\sim$550 pc at $120^{\circ}<l<150^{\circ}$ to $\sim$720 pc at $250^{\circ}<l<290^{\circ}$, while the thin disc scaleheight is as large as $\sim$195 pc in the anticenter direction and $\sim$15% lower at $|l|<30^\circ$. Finally, the axis ratio ($c/a$) of the halo changes from a mean value of $\sim$0.55 in the two first quadrants of the Galaxy to $\sim$0.70 at $190^{\circ}<l<300^{\circ}$. For the halo, the reason for the dependence of the model parameters on the Galactic longitude arises from the well known asymmetric structure of this component. However, the variation of the model parameters of the thin and thick discs with Galactic longitude originates from the gravitational effect of the Galactic long bar. Moreover, the excess of stars in quadrant I (quadrant III) over quadrant IV (quadrant II) is in agreement with this scenario.

astro-ph↗

Transformations between 2MASS, SDSS and BVRI photometric systems: bridging the near infrared and optical

We present colour transformations for the conversion of the {\em 2MASS} photometric system to the Johnson-Cousins $UBVRI$ system and further into the {\em SDSS} $ugriz$ system. We have taken {\em SDSS} $gri$ magnitudes of stars measured with the 2.5-m telescope from $SDSS$ Data Release 5 (DR5), and $BVRI$ and $JHK_{s}$ magnitudes from Stetson's catalogue and \citet{Cu03}, respectively. We matched thousands of stars in the three photometric systems by their coordinates and obtained a homogeneous sample of 825 stars by the following constraints, which are not used in previous transformations: 1) the data are de-reddened, 2) giants are omitted, and 3) the sample stars selected are of the highest quality. We give metallicity, population type, and transformations dependent on two colours. The transformations provide absolute magnitude and distance determinations which can be used in space density evaluations at short distances where some or all of the {\em SDSS} $ugriz$ magnitudes are saturated. The combination of these densities with those evaluated at larger distances using {\em SDSS} $ugriz$ photometry will supply accurate Galactic model parameters, particularly the local space densities for each population.

astro-ph↗

Volume limited dependent Galactic model parameters

We estimated 34 sets of Galactic model parameters for three intermediate latitude fields with Galactic longitudes l=60, l=90, and l=180, and we discussed their dependence on the volume. Also, we confirmed the variation of these parameters with absolute magnitude and Galactic longitude. The star samples in two fields are restricted with bright and unit absolute magnitude intervals, (4,5], and (5,6], whereas for the third field a larger absolute magnitude interval is adopted, (4,10]. The limiting apparent magnitudes of star samples are g=15 and g=22.5 mag which provide space densities within distances in the line of sight 0.9 and 25 kpc. The Galactic model parameters for the thin disc are not volume dependent. However, the ones for thick disc and halo do show spectacular trends in their variations with volume, except for the scalelength of the thick disc. The local space density of the thick disc increases, whereas the scaleheight of the same Galactic component decreases monotonically. However, both model parameters approach asymptotic values at large distances. The axial ratio of the halo increases abruptly for the volumes where thick disc is dominant, whereas it approaches an asymptotic value gradually for larger volumes, indicating a continuous transition from disclike structure to a spherical one at the outermost region of the Galaxy. The variation of the Galactic model parameters with absolute magnitude can be explained by their dependence on the stellar luminosity, whereas the variation with volume and Galactic longitude at short distances is a bias in analysis.

astro-ph↗