arXiv subjects

S. Karanth

Publications and source records attributed to S. Karanth.

14 recordsLinked to original sources

arXiv2026

Optical calibration systems of the Pacific Ocean Neutrino Experiment

This work presents the design and performance characterization of the optical calibration systems produced for the Pacific Ocean Neutrino Experiment (P-ONE), which target gain, energy and time calibration in the detector. These systems include novel light-pulse driver circuitry based on gallium nitride field-effect transistor technology and its application to directional and isotropic, self-monitoring optical calibration instruments. A total of 330 directional light pulsers and two isotropic, 17-inch calibration modules (P-CALs) were produced for the first P-ONE line. We present the designs and performance of both the directional and isotropic calibration devices and perform detailed optical characterizations of both full-production batches. In a wavelength range of $365 - 520\,$nm, our developed driver circuits achieve emission intensities up to $10^{11}\,$photons and pulse widths as small as $1.4\,$ns, respectively. Light-pulse drivers and self-monitoring electronics in the P-CAL were characterized using the same experimental setup, and the instrument's optical-isotropy design was optimized in combination with a dedicated GEANT4-based simulation framework. The optimized P-CAL achieves a simulated isotropy grade of $1.00 \pm 0.01$ across the entire $4\pi\,$solid angle range. These simulation investigations were explicitly confirmed by dedicated measurements in both air and water using two independent experimental setups, and we report the results. With this, a detailed performance estimate for deployed P-CAL modules in P-ONE was possible.

physics.ins-det↗

arXiv2026

First Experimental Limit on the Permanent Electric Dipole Moment of the Deuteron

Permanent electric dipole moments (EDMs) provide a sensitive probe of physics beyond the Standard Model and are directly linked to additional sources of CP violation that could explain the matter-antimatter asymmetry of the universe. EDM measurements of charged particles in storage rings rely on detecting a small tilt of the invariant spin axis with respect to the ring plane. In this work, we present the experimental determination of the invariant spin axis of an ensemble of deuterons in the COoler SYnchrotron (COSY), a conventional magnetic storage ring, using a combination of a radio-frequency Wien filter, a superconducting Siberian snake and an electron-cooler solenoid. The measurements reveal tilts of a few milliradians, which are dominated by systematic effects. From the observed tilts, we derive the first experimental limit on the deuteron EDM, $|d^d|< 2.5\cdot10^{-17}\,e\cdot\mathrm{cm} \; (95\%\,\text{ C.L.})$. This result demonstrates the feasibility of using storage rings to search for EDMs of charged stable hadrons and provides a foundation for future dedicated facilities.

nucl-ex↗

arXiv2025

Long term study of sedimentation and biofouling at Cascadia Basin, the site of the Pacific Ocean Neutrino Experiment

STRings for Absorption Length in Water (STRAW)-a and b were pathfinder instruments deployed to characterize the anticipated site of the Pacific Ocean Neutrino Experiment (P-ONE), which is a future neutrino telescope that will be located in the North Pacific Ocean. Measurements of the evolution of the optical transmission efficiency from STRAW-a showed a decline over the detector's lifetime for the upward-facing modules. Video footage of the pathfinders strongly suggested this decline was caused by biofouling and sedimentation. We measure the effect of biofouling and sedimentation to be a decrease in the transparency of upward-facing optical surfaces over 5 years of operations. A majority of downward-facing optical surfaces, which will dominate P-ONE's sensitivity to astrophysical sources, showed no visible biofouling. Extrapolations motivated by biological growth models estimated that these losses started around 2.5 years after deployment, and suggest a reduction in transparency ranging from 35$\%$ of the original to complete obscuration for the upward-facing modules. Samples of biofouling were taken in order to identify the microbial diversity of these organisms and inform potential intervention strategies. Results of the microbial samples and a candidate anti-biofouling strategy that will be tested on upcoming P-ONE instruments are discussed.

hep-ex↗

arXiv2025

Prototype acoustic positioning system for the Pacific Ocean Neutrino Experiment

We present the design and initial performance characterization of the prototype acoustic positioning system intended for the Pacific Ocean Neutrino Experiment. It comprises novel piezo-acoustic receivers with dedicated filtering- and amplification electronics installed in P-ONE instruments and is complemented by a commercial system comprised of cabled and autonomous acoustic pingers for sub-sea installation manufactured by Sonardyne Ltd. We performed an in-depth characterization of the acoustic receiver electronics and their acoustic sensitivity when integrated into P-ONE pressure housings. These show absolute sensitivities of up to $-125\,$dB re V$^2/\mu$Pa$^2$ in a frequency range of $10-40\,$kHz. We furthermore conducted a positioning measurement campaign in the ocean by deploying three autonomous acoustic pingers on the seafloor, as well as a cabled acoustic interrogator and a P-ONE prototype module deployed from a ship. Using a simple peak-finding detection algorithm, we observe high accuracy in the tracking of relative ranging times at approximately $230-280\,\mu$s at distances of up to $1600\,$m, which is sufficient for positioning detectors in a cubic-kilometer detector and which can be further improved with more involved detection algorithms. The tracking accuracy is further confirmed by independent ranging of the Sonardyne system and closely follows the ship's drift in the wind measured by GPS. The absolute positioning shows the same tracking accuracy with its absolute precision only limited by the large uncertainties of the deployed pinger positions on the seafloor.

physics.ins-det↗

arXiv2025

Maintaining a Resonance Condition of an RF Spin Rotator Through a Feedback Loop in a Storage Ring

This paper presents the successful application of a phase-lock feedback system to maintain the resonance condition of a radio frequency (rf) spin rotator (specifically, an rf Wien filter) with respect to a 120 kHz spin precession in the Cooler Synchrotron (COSY) storage ring. Real-time monitoring of the spin precession and the rf Wien filter signal allows the relative phase between the two to be stabilized at an arbitrary setpoint. The feedback system compensates for deviations in the relative phase by adjusting the frequency and/or phase as needed. With this method, a variation in phase relative to the demand phase with a standard deviation of $\sigma_{\Delta\varphi}\approx 0.2\mathrm{rad}$ could be achieved. The system was implemented in two runs aiming at a first direct measurement of the deuteron electric dipole moment in 2018 and 2021. In addition, the difference between a single-bunch beam affected by the spin rotator and a two-bunch system in which only one bunch is exposed to the spin rotator fields is discussed. Both methods have been used during these beam times. The ability to keep the spin precession and the rf fields synchronized is also crucial for future investigations of electric dipole moments of charged particles using storage rings.

physics.acc-ph↗

arXiv2023

Spin decoherence and off-resonance behavior of radiofrequency-driven spin rotations in storage rings

Radiofrequency-driven resonant spin rotators are routinely used as standard instruments in polarization experiments in particle and nuclear physics. Maintaining the continuous exact parametric spin-resonance condition of the equality of the spin rotator and the spin precession frequency during operation constitutes one of the challenges. We present a detailed analytic description of the impact of detuning the exact spin resonance on the vertical and the in-plane precessing components of the polarization. An important part of the formalism presented here is the consideration of experimentally relevant spin-decoherence effects. We discuss applications of the developed formalism to the interpretation of the experimental data on the novel pilot bunch approach to control the spin-resonance condition during the operation of the radiofrequency-driven Wien filter that is used as a spin rotator in the first direct deuteron electric dipole moment measurement at COSY. We emphasize the potential importance of the hitherto unexplored phase of the envelope of the horizontal polarization as an indicator of the stability of the radiofrequency-driven spin rotations in storage rings. The work presented here serves as a satellite publication to the work published concurrently on the proof of principle experiment about the so-called pilot bunch approach that was developed to provide co-magnetometry for the deuteron electric dipole moment experiment at COSY.

physics.acc-ph↗

arXiv2023

Pilot bunch and co-magnetometry of polarized particles stored in a ring

In polarization experiments at storage rings, one of the challenges is to maintain the spin-resonance condition of a radio-frequency spin rotator with the spin-precessions of the orbiting particles. Time-dependent variations of the magnetic fields of ring elements lead to unwanted variations of the spin precession frequency. We report here on a solution to this problem by shielding (or masking) one of the bunches stored in the ring from the high-frequency fields of the spin rotator, so that the masked pilot bunch acts as a co-magnetometer for the other signal bunch, tracking fluctuations in the ring on a time scale of about one second. While the new method was developed primarily for searches of electric dipole moments of charged particles, it may have far-reaching implications for future spin physics facilities, such as the EIC and NICA.

physics.ins-det↗

arXiv2021

Spin Physics at COSY (2021-2024 and beyond) -- Pathfinder investigations toward an EDM storage ring and Spin-for-FAIR

The unique global feature of COSY is its ability to accelerate, store and manipulate polarized proton and deuteron beams. In the recent past, these beams have been used primarily for precision measurements, in particular in connection with the study of charged particle EDMs (Electric Dipole Moment) in storage rings. The role of COSY as a R&D facility and for initial (static and oscillating) EDM measurements can hardly be overestimated. Unfortunately, as a consequence of the strategic decisions of Forschungszentrum J\"ulich and the subsequent "TransFAIR" agreement between FZJ and GSI Darmstadt, it is currently planned to stop the operation of COSY by the end of 2024. The various groups working with polarized beams at COSY felt it important to collect information on essential measurements to be performed until the termination of machine operation. These experiments, briefly described in this document along with an estimate of the beam time required, serve as pathfinder investigations toward an EDM storage ring and Spin for FAIR.

physics.acc-ph↗

arXiv2021

First detection of collective oscillations of a stored deuteron beam with an amplitude close to the quantum limit

We investigated coherent betatron oscillations of a deuteron beam in the storage ring COSY, excited by a detuned radio-frequency Wien filter. The beam oscillations were detected by conventional beam position monitors. With the currently available apparatus, we show that oscillation amplitudes down to \SI{1}{\micro \meter} can be detected. The interpretation of the response of the stored beam to the detuned radio-frequency Wien filter is based on simulations of the beam evolution in the lattice of the ring and realistic time-dependent 3D field maps of the Wien filter. Future measurements of the electric dipole moment of protons will, however, require control of the relative position of counter-propagating beams in the sub-picometer range. Since here the stored beam can be considered as a rarefied gas of uncorrelated particles, we moreover demonstrate that the amplitudes of the zero-point (ground state) betatron oscillations of individual particles are only a factor of about 10 larger than the Heisenberg uncertainty limit. As a consequence of this, we conclude that quantum mechanics does not preclude the control of the beam centroids to sub-picometer accuracy. The smallest Lorentz force exerted on a single particle that we have been able to determine is \SI{10}{aN}.

nucl-ex↗

arXiv2020

A New Beam Polarimeter at COSY to Search for Electric Dipole Moments of Charged Particles

A calorimetric polarimeter based on inorganic LYSO scintillators is described. It has been designed for use in a storage ring to search for electric dipole moments (EDM) of charged particles such as the proton and deuteron. Its development and first use was on the Cooler Synchrotron (COSY) at the Forschungszentrum J\"ulich with 0.97 GeV/c polarized deuterons, a particle and energy suitable for an EDM search. The search requires a polarimeter with high efficiency, large analyzing power, and stable operating characteristics. With typical beam momenta of about 1 GeV/c, the scattering of protons or deuterons from a carbon target into forward angles becomes a nearly optimal choice of an analyzing reaction. The polarimeter described here consists of 52 LYSO detector modules, arranged in 4 symmetric blocks (up, down, left, right) for energy determination behind plastic scintillators for particle identification via energy loss. The commissioning results of the current setup demonstrate that the polarimeter is ready to be employed in a first direct search for an EDM on the deuteron, which is planned at COSY in the next two years.

physics.ins-det↗

arXiv2020

Beam-based alignment at the Cooler Synchrotron COSY as a prerequisite for an electric dipole moment measurement

The J\"ulich Electric Dipole moment Investigation (JEDI) collaboration aims at a direct measurement of the Electric Dipole Moment (EDM) of protons and deuterons using a storage ring. The measurement is based on a polarization measurement. In order to reach highest accuracy, one has to know the exact trajectory through the magnets, especially the quadrupoles, to avoid the influence of magnetic fields on the polarization vector. In this paper, the development of a beam-based alignment technique is described that was developed and implemented at the COoler SYnchrotron (COSY) at Forschungszentrum J\"ulich. Well aligned quadrupoles permit one to absolutely calibrate the Beam Position Monitors (BPMs). The method is based on the fact that a particle beam, which does not pass through the center of a quadrupole, experiences a deflection. The precision reached by the method is approximately 40 micro meter. Some consequences for the design of a new high precision storage ring for EDM mesasurements are discussed.

physics.acc-ph↗

arXiv2020

Influence of electron cooling on the polarization lifetime of a horizontally polarized storage ring beam

A previous publication has shown that the in-plane polarization (IPP) component of a polarized 0.97-GeV/c deuteron beam in the COSY storage ring may acquire a polarization half-life in excess of 1000 s through a combination of beam bunching, electron cooling (prior to any spin manipulation), sextupole field adjustment, and a limitation of the beam intensity. This paper documents further tests pointing to additional gains in the IPP lifetime if cooling is active throughout the beam store.

physics.acc-ph↗

arXiv2019

Storage Ring to Search for Electric Dipole Moments of Charged Particles -- Feasibility Study

The proposed method exploits charged particles confined as a storage ring beam (proton, deuteron, possibly $^3$He) to search for an intrinsic electric dipole moment (EDM) aligned along the particle spin axis. Statistical sensitivities could approach 10$^{-29}$ e$\cdot$cm. The challenge will be to reduce systematic errors to similar levels. The ring will be adjusted to preserve the spin polarisation, initially parallel to the particle velocity, for times in excess of 15 minutes. Large radial electric fields, acting through the EDM, will rotate the polarisation from the longitudinal to the vertical direction. The slow rise in the vertical polarisation component, detected through scattering from a target, signals the EDM. The project strategy is outlined. A stepwise plan is foreseen, starting with ongoing COSY activities that demonstrate technical feasibility. Achievements to date include reduced polarization measurement errors, long horizontal plane polarization lifetimes, and control of the polarization direction through feedback from scattering measurements. The project continues with a proof-of-capability measurement (precursor experiment; first direct deuteron EDM measurement), an intermediate prototype ring (proof-of-principle; demonstrator for key technologies), and finally a high-precision electric-field storage ring.

hep-ex↗

arXiv2019

Feasibility Study for an EDM Storage Ring

This project exploits charged particles confined as a storage ring beam (proton, deuteron, possibly $^3$He) to search for an intrinsic electric dipole moment (EDM, $\vec d$) aligned along the particle spin axis. Statistical sensitivities can approach $10^{-29}$~e$\cdot$cm. The challenge will be to reduce systematic errors to similar levels. The ring will be adjusted to preserve the spin polarization, initially parallel to the particle velocity, for times in excess of 15 minutes. Large radial electric fields, acting through the EDM, will rotate the polarization ($\vec d \times\vec E$). The slow rise in the vertical polarization component, detected through scattering from a target, signals the EDM. The project strategy is outlined. It foresees a step-wise plan, starting with ongoing COSY activities that demonstrate technical feasibility. Achievements to date include reduced polarization measurement errors, long horizontal-plane polarization lifetimes, and control of the polarization direction through feedback from the scattering measurements. The project continues with a proof-of-capability measurement (precursor experiment; first direct deuteron EDM measurement), an intermediate prototype ring (proof-of-principle; demonstrator for key technologies), and finally the high precision electric-field storage ring.

physics.acc-ph↗