arXiv subjects

S. Kawamura

Publications and source records attributed to S. Kawamura.

13 recordsLinked to original sources

arXiv2024

Circular polarization measurement for individual gamma rays in capture reactions with intense pulsed neutrons

Measurements of circular polarization of $γ$-ray emitted from neutron capture reactions provide valuable information for nuclear physics studies. The spin and parity of excited states can be determined by measuring the circular polarization from polarized neutron capture reactions. Furthermore, the $γ$-ray circular polarization in a neutron capture resonance is crucial for studying the enhancement effect of parity nonconservation in compound nuclei. The $γ$-ray circular polarization can be measured using a polarimeter based on magnetic Compton scattering. A polarimeter was constructed, and its performance indicators were evaluated using a circularly polarized $γ$-ray beam. Furthermore, as a demonstration, the $γ$-ray circular polarization was measured in $^{32}$S($\vec{\textrm{n}}$,$γ$)$^{33}$S reactions with polarized neutrons.

physics.ins-det↗

arXiv2023

Improved Measurements of Muonic Helium Ground-State Hyperfine Structure at a Near-Zero Magnetic Field

Muonic helium atom hyperfine structure (HFS) measurements are a sensitive tool to test the three-body atomic system and bound-state quantum electrodynamics theory, and determine fundamental constants of the negative muon magnetic moment and mass. The world's most intense pulsed negative muon beam at the Muon Science Facility of the Japan Proton Accelerator Research Complex allows improvement of previous measurements and testing further $CPT$ invariance by comparing the magnetic moments and masses of positive and negative muons (second-generation leptons). We report new ground-state HFS measurements of muonic helium-4 atoms at a near-zero magnetic field, performed for the first time using a small admixture of CH$_{4}$ as an electron donor to form neutral muonic helium atoms efficiently. Our analysis gives $Δν$ = 4464.980(20) MHz (4.5 ppm), which is more precise than both previous measurements at weak and high fields. The muonium ground-state HFS was also measured under the same conditions to investigate the isotopic effect on the frequency shift due to the gas density dependence in He with CH$_{4}$ admixture and compared with previous studies. Muonium and muonic helium can be regarded as light and heavy hydrogen isotopes with an isotopic mass ratio of 36. No isotopic effect was observed within the current experimental precision.

physics.atom-ph↗

arXiv2023

High sensitivity of a future search for P-odd/T-odd interactions on the 0.75 eV $p$-wave resonance in $\vec{n}+^{139}\vec{\rm La}$ forward transmission determined using pulsed neutron beam

Neutron transmission experiments can offer a new type of highly sensitive search for time-reversal invariance violating (TRIV) effects in nucleon-nucleon interactions via the same enhancement mechanism observed for large parity violating (PV) effects in neutron-induced compound nuclear processes. In these compound processes, the TRIV cross-section is given as the product of the PV cross-section, a spin-factor $\kappa$, and a ratio of TRIV and PV matrix elements. We determined $\kappa$ to be $0.59\pm0.05$ for $^{139}$La+$n$ using both $(n, \gamma)$ spectroscopy and ($\vec{n}+^{139}\vec{\rm La}$) transmission. This result quantifies for the first time the high sensitivity of the $^{139}$La 0.75~eV $p$-wave resonance in a future search for P-odd/T-odd interactions in ($\vec{n}+^{139}\vec{\rm La}$) forward transmission.

nucl-ex↗

arXiv2023

Spin dependence in the $p$-wave resonance of ${^{139}\vec{\rm{La}}+\vec{n}}$

We measured the spin dependence in a neutron-induced $p$-wave resonance by using a polarized epithermal neutron beam and a polarized nuclear target. Our study focuses on the 0.75~eV $p$-wave resonance state of $^{139}$La+$n$, where largely enhanced parity violation has been observed. We determined the partial neutron width of the $p$-wave resonance by measuring the spin dependence of the neutron absorption cross section between polarized $^{139}\rm{La}$ and polarized neutrons. Our findings serve as a foundation for the quantitative study of the enhancement effect of the discrete symmetry violations caused by mixing between partial amplitudes in the compound nuclei.

nucl-ex↗

arXiv2020

Application of the independent component analysis to the iKAGRA data

We apply the independent component analysis (ICA) to the real data from a gravitational wave detector for the first time. Specifically we use the iKAGRA data taken in April 2016, and calculate the correlations between the gravitational wave strain channel and 35 physical environmental channels. Using a couple of seismic channels which are found to be strongly correlated with the strain, we perform ICA. Injecting a sinusoidal continuous signal in the strain channel, we find that ICA recovers correct parameters with enhanced signal-to-noise ratio, which demonstrates usefulness of this method. Among the two implementations of ICA used here, we find the correlation method yields the optimal result for the case environmental noises act on the strain channel linearly.

astro-ph.IM↗

arXiv2019

First cryogenic test operation of underground km-scale gravitational-wave observatory KAGRA

KAGRA is a second-generation interferometric gravitational-wave detector with 3-km arms constructed at Kamioka, Gifu in Japan. It is now in its final installation phase, which we call bKAGRA (baseline KAGRA), with scientific observations expected to begin in late 2019. One of the advantages of KAGRA is its underground location of at least 200 m below the ground surface, which brings small seismic motion at low frequencies and high stability of the detector. Another advantage is that it cools down the sapphire test mass mirrors to cryogenic temperatures to reduce thermal noise. In April-May 2018, we have operated a 3-km Michelson interferometer with a cryogenic test mass for 10 days, which was the first time that km-scale interferometer was operated at cryogenic temperatures. In this article, we report the results of this "bKAGRA Phase 1" operation. We have demonstrated the feasibility of 3-km interferometer alignment and control with cryogenic mirrors.

astro-ph.IM↗

arXiv2018

KAGRA: 2.5 Generation Interferometric Gravitational Wave Detector

The recent detections of gravitational waves (GWs) reported by LIGO/Virgo collaborations have made significant impact on physics and astronomy. A global network of GW detectors will play a key role to solve the unknown nature of the sources in coordinated observations with astronomical telescopes and detectors. Here we introduce KAGRA (former name LCGT; Large-scale Cryogenic Gravitational wave Telescope), a new GW detector with two 3-km baseline arms arranged in the shape of an "L", located inside the Mt. Ikenoyama, Kamioka, Gifu, Japan. KAGRA's design is similar to those of the second generations such as Advanced LIGO/Virgo, but it will be operating at the cryogenic temperature with sapphire mirrors. This low temperature feature is advantageous for improving the sensitivity around 100 Hz and is considered as an important feature for the third generation GW detector concept (e.g. Einstein Telescope of Europe or Cosmic Explorer of USA). Hence, KAGRA is often called as a 2.5 generation GW detector based on laser interferometry. The installation and commissioning of KAGRA is underway and its cryogenic systems have been successfully tested in May, 2018. KAGRA's first observation run is scheduled in late 2019, aiming to join the third observation run (O3) of the advanced LIGO/Virgo network. In this work, we describe a brief history of KAGRA and highlights of main feature. We also discuss the prospects of GW observation with KAGRA in the era of O3. When operating along with the existing GW detectors, KAGRA will be helpful to locate a GW source more accurately and to determine the source parameters with higher precision, providing information for follow-up observations of a GW trigger candidate.

gr-qc↗

arXiv2017

Construction of KAGRA: an Underground Gravitational Wave Observatory

Major construction and initial-phase operation of a second-generation gravitational-wave detector KAGRA has been completed. The entire 3-km detector is installed underground in a mine in order to be isolated from background seismic vibrations on the surface. This allows us to achieve a good sensitivity at low frequencies and high stability of the detector. Bare-bones equipment for the interferometer operation has been installed and the first test run was accomplished in March and April of 2016 with a rather simple configuration. The initial configuration of KAGRA is named {\it iKAGRA}. In this paper, we summarize the construction of KAGRA, including the study of the advantages and challenges of building an underground detector and the operation of the iKAGRA interferometer together with the geophysics interferometer that has been constructed in the same tunnel.

gr-qc↗

arXiv2017

The status of KAGRA underground cryogenic gravitational wave telescope

KAGRA is a 3-km interferometric gravitational wave telescope located in the Kamioka mine in Japan. It is the first km-class gravitational wave telescope constructed underground to reduce seismic noise, and the first km-class telescope to use cryogenic cooling of test masses to reduce thermal noise. The construction of the infrastructure to house the interferometer in the tunnel, and the initial phase operation of the interferometer with a simple 3-km Michelson configuration have been completed. The first cryogenic operation is expected in 2018, and the observing runs with a full interferometer are expected in 2020s. The basic interferometer configuration and the current status of KAGRA are described.

gr-qc↗

arXiv2009

Development of displacement- and frequency-noise-free interferometer in 3-D configuration for gravitational wave detection

The displacement- and frequency-noise-free interferometer (DFI) is a multiple laser interferometer array for gravitational wave detection free from both the displacement noise of optics and laser frequency noise. So far, partial experimental demonstrations of DFI have been done in 2-D table top experiments. In this paper, we report the complete demonstration of a 3-D DFI. The DFI consists of four Mach-Zehnder interferometers with four mirrors and two beamsplitters. The displacement noises both of mirrors and beamsplitters were suppressed by up to 40 dB. The non-vanishing DFI response to a gravitational wave was successfully confirmed using multiple electro-optic modulators and computing methods.

gr-qc↗

arXiv2008

Development of signal-extraction scheme for Resonant Sideband Extraction

As a future plan, an advanced gravitational-wave detector will employ an optical configuration of resonant sideband extraction (RSE), achieved with an additional mirror at the signal-detection port of the power-recycled Fabry-Perot Michelson interferometer. To control the complex coupled cavity system, one of the most important design issues is how to extract the longitudinal control signals of the cavities. We developed a new signal-extraction scheme which provides an appropriate sensing matrix. The new method uses two sets of sidebands: one of the sideband components satisfies the critical coupling ondition for the RSE interferometer and reaches the signal-extraction port, and the other sideband is completely reflected by the Michelson interferometer. They provide a diagonalized sensing matrix and enable the RSE control to be robust.

gr-qc↗

arXiv2007

Frequency noise and intensity noise of next-generation gravitational-wave detectors with RF/DC readout schemes

The sensitivity of next-generation gravitational-wave detectors such as Advanced LIGO and LCGT should be limited mostly by quantum noise with an expected technical progress to reduce seismic noise and thermal noise. Those detectors will employ the optical configuration of resonant-sideband-extraction that can be realized with a signal-recycling mirror added to the Fabry-Perot Michelson interferometer. While this configuration can reduce quantum noise of the detector, it can possibly increase laser frequency noise and intensity noise. The analysis of laser noise in the interferometer with the conventional configuration has been done in several papers, and we shall extend the analysis to the resonant-sideband-extraction configuration with the radiation pressure effect included. We shall also refer to laser noise in the case we employ the so-called DC readout scheme.

gr-qc↗

arXiv1999

Observational Limit on Gravitational Waves from Binary Neutron Stars in the Galaxy

Using optimal matched filtering, we search 25 hours of data from the LIGO 40-meter prototype laser interferometric gravitational-wave detector for gravitational-wave chirps emitted by coalescing binary systems within our Galaxy. This is the first test of this filtering technique on real interferometric data. An upper limit on the rate R of neutron star binary inspirals in our Galaxy is obtained: with 90% confidence, R< 0.5/hour. Similar experiments with LIGO interferometers will provide constraints on the population of tight binary neutron star systems in the Universe.

gr-qc↗