arXiv subjects

S. Kersten

Publications and source records attributed to S. Kersten.

4 recordsLinked to original sources

arXiv2022

System Integration of ATLAS ITK Pixel DCS ASICs

During the ATLAS phase II upgrade, the tracking system of the ATLAS experiment will be replaced by an all-silicon detector called the inner tracker (ITK) with a pixel detector as the most inner part. The monitoring data of the new system will be aggregated from an on-detector ASIC called Monitoring Of Pixel System (MOPS) and sent to the Detector Control System(DCS) using a new interface called MOPS-HUB. The hardware components of the MOPS-HUB, firmware specifications for the FPGA of MOPS-HUB and its integration plan will be presented. In addition, an irradiation plan for the new system will be introduced.

physics.ins-det↗

arXiv2008

Alignment of the Pixel and SCT Modules for the 2004 ATLAS Combined Test Beam

A small set of final prototypes of the ATLAS Inner Detector silicon tracker (Pixel and SCT) were used to take data during the 2004 Combined Test Beam. Data were collected from runs with beams of different flavour (electrons, pions, muons and photons) with a momentum range of 2 to 180 GeV/c. Four independent methods were used to align the silicon modules. The corrections obtained were validated using the known momenta of the beam particles and were shown to yield consistent results among the different alignment approaches. From the residual distributions, it is concluded that the precision attained in the alignment of the silicon modules is of the order of 5 micrometers in their most precise coordinate.

physics.ins-det↗

arXiv2006

System Tests of the ATLAS Pixel Detector

The innermost part of the ATLAS (A Toroidal LHC ApparatuS) experiment at the LHC (Large Hadron Collider) will be a pixel detector, which is presently under construction. Once installed into the experimental area, access will be extremely limited. To ensure that the integrated detector assembly operates as expected, a fraction of the detector which includes the power supplies and monitoring system, the optical readout, and the pixel modules themselves, has been assembled and operated in a laboratory setting for what we refer to as system tests. Results from these tests are presented.

physics.ins-det↗

arXiv2001

Development of a Detector Control System for the ATLAS Pixel Detector

The innermost part of the ATLAS experiment will be a pixel detector containing around 1750 individual detector modules. A detector control system (DCS) is required to handle thousands of I/O channels with varying characteristics. The main building blocks of the pixel DCS are the cooling system, the power supplies and the thermal interlock system, responsible for the ultimate safety of the pixel sensors. The ATLAS Embedded Local Monitor Board (ELMB), a multi purpose front end I/O system with a CAN interface, is foreseen for several monitoring and control tasks. The Supervisory, Control And Data Acquisition (SCADA) system will use PVSS, a commercial software product chosen for the CERN LHC experiments. We report on the status of the different building blocks of the ATLAS pixel DCS.

physics.ins-det↗