arXiv subjects

S. Koike

Publications and source records attributed to S. Koike.

4 recordsLinked to original sources

arXiv2015

A'Campo curvature bumps and the Dirac phenomenon near a singular point

The level curves of an analytic function germ almost always have bumps at unexpected points near the singularity. This profound discovery of N. A'Campo is fully explored in this paper for $f(z,w)\in \C\{z,w\}$, using the Newton-Puiseux infinitesimals and the notion of gradient canyon. Equally unexpected is the Dirac phenomenon: as $c\ra 0$, the total Gaussian curvature of $f(z,w)=c$ accumulates in the gradient canyons.

math.AG↗

arXiv2015

Development and operational experience of magnetic horn system for T2K experiment

A magnetic horn system to be operated at a pulsed current of 320 kA and to survive high-power proton beam operation at 750 kW was developed for the T2K experiment. The first set of T2K magnetic horns was operated for over 12 million pulses during the four years of operation from 2010 to 2013, under a maximum beam power of 230 kW, and $6.63\times10^{20}$ protons were exposed to the production target. No significant damage was observed throughout this period. This successful operation of the T2K magnetic horns led to the discovery of the $ν_μ\rightarrowν_e$ oscillation phenomenon in 2013 by the T2K experiment. In this paper, details of the design, construction, and operation experience of the T2K magnetic horns are described.

physics.ins-det↗

arXiv2013

A Study of Cooling Time Reduction of Interferometric Cryogenic Gravitational Wave Detectors Using a High-Emissivity Coating

In interferometric cryogenic gravitational wave detectors, there are plans to cool mirrors and their suspension systems (payloads) in order to reduce thermal noise, that is, one of the fundamental noise sources. Because of the large payload masses (several hundred kg in total) and their thermal isolation, a cooling time of several months is required. Our calculation shows that a high-emissivity coating (e.g. a diamond-like carbon (DLC) coating) can reduce the cooling time effectively by enhancing radiation heat transfer. Here, we have experimentally verified the effect of the DLC coating on the reduction of the cooling time.

gr-qc↗

arXiv2000

Fabrication Process of Rounded Damped Detuned Structure

Following the successful design and fabrication of Damped Detuned Structures (DDS), the JLC/NLC linear collider project advanced to Rounded Damped Detuned Structures (RDDS) with curved cross section of the cavity shape for increased shunt impedance. Various advanced techniques for fabricating RDDS1 disks comparing to those for DDS were established to satisfy the dimension accuracy of +-1 micron over the entire surface made by ultra-precision turning. These disks were assembled with almost the same stacking and bonding jigs and processes as those of DDS3 assembly. In consequence, the assembly showed little disk-to-disk misalignment within 1 micron before and after the process. Though, it had 200 micron smooth bowing, which was subsequently corrected as DDS3, and flares at both ends.

hep-ex↗