SearcharxivSearch

arXiv subjects

S. Kret

Publications and source records attributed to S. Kret.

11 recordsLinked to original sources

Magnetic Phase Diagram of Mn3+xSn1-x Epitaxial Thin Films: Extending the Anomalous Hall Effect to Low Temperatures via Intrinsic Alloying

Antiferromagnets with broken time-reversal symmetry, such as Mn3Sn, have emerged as promising platforms for exploring topological and correlated electron physics. Mn3Sn is known to show two magnetic phase transitions: a non-collinear inverse triangular antiferromagnetic (IT-AFM) spin configuration is formed below its Neel temperature, whereas at T1 that usually locates below room temperature, it transits to an incommensurate spin state. Accordingly, intriguing properties such as a strong anomalous Hall effect, observed from TN to T1, disappear below T1, limiting its utility at low temperatures. While bulk Mn3Sn has been extensively studied, the magnetic phase transitions and their tunability in thin films remain largely unexplored. Here, we investigate the magnetic and magneto-transport properties of Mn3+xSn1-x epitaxial thin films prepared by magnetron sputtering, systematically varying the Mn-Sn composition. Our results reveal that intrinsic alloying with Mn provides us with a handle to tune T1, with the IT-AFM phase stabilized down to liquid helium temperatures for x > 0.15. From a magnetic phase diagram for epitaxial thin films, we also find a consistent magnetic anomaly ~55 K below TN, accompanied by thermal hysteresis. Furthermore, the reduction of TN in thin films relative to bulk values is shown to correlate with lattice parameter changes. These findings extend the accessible temperature range for Mn3Sn's topological properties, paving the way for novel applications and further investigations into the interplay of spin, lattice, and electronic degrees of freedom in thin-film geometries.

cond-mat.mtrl-sci

Size dependence of biexciton binding energy in strained ZnTe/(Zn,Mg)Te nanowire quantum dots

Nanowire quantum dots, i.e., heterostructures consisting of an axial insertion of low bandgap semiconductor within large band gap semiconductor nanowire, attract interest due to their emerging applications in the field of quantum communication technology. Here, we report on the fabrication of ZnTe/(Zn,Mg)Te nanowire quantum dots by molecular beam epitaxy and on a detailed investigation of the optical emission from individual structures by means of a combined study involving cathodoluminescence and micro-photoluminescence. A distinct dependence of the biexciton binding energy, defined as the spectral distance between the exciton and biexciton emission lines on the length of ZnTe axial insertions, is observed. With increasing dot length, not only does the biexciton binding energy value decrease distinctly, but also its character changes from binding to antibinding. The explanation of this effect relies on the appearance of a piezoelectric field along the nanowire axis, leading to a pronounced separation of electrons and holes. The change from a bound to an unbound character of biexciton energy can be well reproduced by theoretical calculations, which indicate an important contribution of excited hole states to this effect in the case of relatively large quantum dots.

cond-mat.mes-hall

PbTe/SnTe heterostructures -- candidate platform for studying spin-triplet superconductivity

This paper explores the potential for spin-triplet superconductivity in molecular beam epitaxy grown PbTe/SnTe semiconductor heterostructures. We present convincing evidence for spin-triplet pairing by soft point-contact spectroscopy experiments, using both spin-polarized and unpolarized electrons and additionally, by detailed analysis of the upper critical field, as inferred from the four probe resistance measurements. The experimental data are described in terms of the Anderson-Brinkman-Morel model of p-wave electron pairing. Our results confirm the predictions on strain-induced topological superconductivity by E.Tang and L. Fu (Nature Physics, 10, 964, 2014).

cond-mat.supr-con

HgTe quantum wells for QHE metrology under soft cryomagnetic conditions: permanent magnets and liquid ${^4He}$ temperatures

HgTe quantum wells with a thickness of ${\sim}$7 nm may have a graphene-like band structure and have been recently proposed to be potential candidates for quantum Hall effect (QHE) resistance standards under the condition of operation in the fields above certain critical field $B_c$, above which the topological phase (with parasitic edge conduction) disappears. We present experimental studies of the magnetoresistance of different of HgTe quantum wells as a function temperature and magnetic field, determining the critical magnetic field $B_c$. We demonstrate that for QWs of specific width $B_c$ becomes low enough to grant observation of remarkably wide QHE plateaus at the filling factor ${v=-1}$ (holes) in relaxed cryomagnetic conditions: while using commercial 0.82 T Neodymium permanent magnets and temperature of a few Kelvin provided by ${^4He}$ liquid system only. Band structure calculations allow us to explain qualitatively observed phenomena due to the interplay between light holes and heavy holes energy sub-bands (side maxima of the valence band). Our work clearly shows that the peculiar band structure properties of HgTe QWs with massless Dirac fermions make them an ideal platform for developing metrological devices with relaxed cryomagnetic conditions.

cond-mat.mes-hall

Antiferromagnetic Hysteresis above the Spin Flop Field

Magnetocrystalline anisotropy is essential in the physics of antiferromagnets and commonly treated as a constant, not depending on an external magnetic field. However, we demonstrate that in CoO the anisotropy should necessarily depend on the magnetic field, which is shown by the spin Hall magnetoresistance of the CoO $|$ Pt device. Below the N\'eel temperature CoO reveals a spin-flop transition at 240 K at 7.0 T, above which a hysteresis in the angular dependence of magnetoresistance unexpectedly persists up to 30 T. This behavior is shown to agree with the presence of the unquenched orbital momentum, which can play an important role in antiferromagnetic spintronics.

cond-mat.mtrl-sci

Experimental search for the origin of low-energy modes in topological materials

Point-contact spectroscopy of several non-superconducting topological materials reveals a low temperature phase transition that is characterized by a Bardeen-Cooper-Schrieffer-type of criticality. We find such a behavior of differential conductance for topological surfaces of non-magnetic and magnetic Pb$_{1-y-x}$Sn$_y$Mn$_x$Te. We examine a possible contribution from superconducting nanoparticles, and show to what extent our data are consistent with Brzezicki's et al. theory [arXiv:1812.02168], assigning the observations to a collective state adjacent to atomic steps at topological surfaces.

cond-mat.supr-con

Defect-free SnTe topological crystalline insulator nanowires grown by molecular beam epitaxy on graphene

SnTe topological crystalline insulator nanowires have been grown by molecular beam epitaxy on graphene/SiC substrates. The nanowires have cubic rock-salt structure, they grow along [001] crystallographic direction and have four sidewalls consisting of {100} crystal planes known to host metallic surface states with Dirac dispersion. Thorough high resolution transmission electron microscopy investigations show that the nanowires grow on graphene in the van der Walls epitaxy mode induced when the catalyzing Au nanoparticle mixes with Sn delivered from SnTe flux, providing liquid Au-Sn alloy. The nanowires are totally free from structural defects, but their {001} sidewalls are prone to oxidation, which points out on necessity of depositing protective capping in view of exploiting the magneto-electric transport phenomena involving charge carriers occupying topologically protected states.

cond-mat.mtrl-sci

Wurtzite (Ga,Mn)As nanowire shells with ferromagnetic properties

(Ga,Mn)As in wurtzite crystal structure, is coherently grown by molecular beam epitaxy on the {1100} side facets of wurtizte (Ga,In)As nanowires and further encapsulated by (Ga,Al)As and low temperature GaAs. For the first time a true long-range ferromagnetic magnetic order is observed in non-planar (Ga,Mn)As, which is attributed to a more effective hole confinement in the shell containing Mn by a proper selection/choice of both the core and outer shell materials.

cond-mat.mtrl-sci

Engineering the hole confinement for CdTe-based quantum dot molecules

We demonstrate an efficient method to engineer the quantum confinement in a system of two quantum dots grown in a vertical stack. We achieve this by using materials with a different lattice constant for the growth of the outer and inner barriers. We monitor the resulting dot morphology with transmission electron microscopy studies and correlate the results with ensemble quantum dot photoluminescence. Furthermore, we embed the double quantum dots into diode structures and study photoluminescence as a function of bias voltage. We show that in properly engineered structures, it is possible to achieve a resonance of the hole states by tuning the energy levels with electric field. At the resonance, we observe signatures of a formation of a molecular state, hybridized over the two dots.

cond-mat.mes-hall

GaAs:Mn nanowires grown by molecular beam epitaxy of (Ga,Mn)As at MnAs segregation conditions

GaAs:Mn nanowires were obtained on GaAs(001) and GaAs(111)B substrates by molecular beam epitaxial growth of (Ga,Mn)As at conditions leading to MnAs phase separation. Their density is proportional to the density of catalyzing MnAs nanoislands, which can be controlled by the Mn flux and/or the substrate temperature. Being rooted in the ferromagnetic semiconductor (Ga,Mn)As, the nanowires combine one-dimensional properties with the magnetic properties of (Ga,Mn)As and provide natural, self assembled structures for nanospintronics.

cond-mat.mtrl-sci