arXiv subjects

S. Lagarde

Publications and source records attributed to S. Lagarde.

At least 19 recordsLinked to original sources

arXiv2026

CHARA/SPICA: The six-telescope visible combiner and near-infrared fringe tracker for the CHARA Array

The suite called Stellar Parameters and Images with a Cophased Array (SPICA) has two interferometric instruments installed at the focus of the CHARA Array located at Mount Wilson, CA. SPICA is made of SPICA-VIS, a fiber-fed six-beam visible spectrograph with three spectral resolutions, and SPICA-FT, a six-beam near-infrared fringe tracker for the fast stabilization of the fringes. SPICA is opening access to imaging in the visible domain with an unprecedented angular resolution down to 0.2 milliarcseconds. It has been designed around a large survey of fundamental parameters of stars over the Hertzsprung- Russell diagram, aiming at understanding the deviations from the standard empirical relations of stellar physics as a function of activity: limb darkening, multiplicity, rotation, winds, and environments. SPICA makes use of the advanced technologies in electron multiplying detectors in the visible and electron- avalanche photodiode arrays in the near-infrared. It benefits from the newly commissioned adaptive optics on the one-meter telescopes of the array. The modules of the visible instrument, SPICA-VIS, optimize the injection of light into single-mode fibers for spatial filtering before spectral dispersion in the image plane. The fringe tracker, SPICA-FT, performs group-delay and phase-delay tracking for six beams in the H band. SPICA-FT can use an all-in-one or ABCD encoding of the fringe signals. SPICA is operational on sky and is close to reaching the expected performance in low spectral resolution, in particular, for the Interferometric Survey of Stellar Parameters (ISSP). More work is still needed to achieve the ultimate performance in terms of sensitivity and to allow operations with higher spectral resolutions.

astro-ph.IM↗

arXiv2026

ANDES, the high-resolution spectrograph of the ELT: simulated performance of the CORO module and overview of the high-contrast capabilities for exoplanet observations

We present the simulated performance of the coronagraph (CORO) module for ANDES, the Extremely Large Telescope (ELT) high-resolution spectrograph. ANDES aims to address a broad range of science cases, including the characterization of the atmosphere of exoplanets. With a first light envisioned by 2035, the instrument baseline features a modular fiber-fed echelle spectrograph with visible and near-infrared ultra-stable spectral arms to provide a simultaneous spectral range of 0.4-1.8\,$\mu$m with a spectral resolving power up to 100,000. ANDES also includes an Integral Field Unit (IFU) mode-fed by a single-conjugate adaptive optics (SCAO) module and an insertable CORO module, enabling the combination of high-contrast imaging and high-dispersion spectroscopy (R=100,000) for the study of exoplanet properties. In this contribution, the ANDES CORO design, its main features and its simulated performance are detailed in the presence of SCAO residual errors to probe exoplanet atmospheres with the spectro-imager mode at high-spatial resolution and with unprecedented angular resolution. We show the preliminary simulation results on the predicted contrast and the expected detection performance with ANDES performance unfolded (APU), the simulation tool to determine the yield of exoplanets that will be detected in emitted and possibly reflected light. The characterization operation of the instrument will be discussed to assess the ANDES ability to detect atomic and molecular signatures connected to the exoplanet atmosphere characteristics.

astro-ph.IM↗

arXiv2025

The complex inner disk of the Herbig Ae star HD 100453 with VLTI/MATISSE

The inner regions of planet-forming disks hold invaluable insights for our understanding of planet formation. The disk around the Herbig star HD 100453 presents one such environment, with an inner disk that is significantly misaligned with respect to the outer disk. This paper expands the existing H-band (PIONIER) and K-band (GRAVITY) interferometric studies of the HD 100453 inner disk to the L-band with the MATISSE VLTI instrument. With snapshot data spanning approximately four years we aim for a more comprehensive understanding of the inner disk structures and their potential time evolution. Based on the MATISSE data obtained, we use a combination of analytical models and image reconstruction to constrain the disk structure. Additionally, we fit a temperature gradient model to the selected wavelength range of PIONIER, GRAVITY and MATISSE to derive physical properties of the inner regions. Our parametric model finds an inclination of $\sim 47.5^\circ$ and a position angle of $\sim 83.6^\circ$, which corroborates the case of strong inner-outer disk misalignment. From the symmetric temperature gradient we derive an inner disk radius around $\sim0.27$ au, with dust surface densities of $\Sigma_{\rm{subl}} \approx 10^{-3.2}$ g/cm$^2$ and vertical optical depth $\tau_{\rm{z, subl}} \approx 0.1-0.06$. Same-night MATISSE and GRAVITY observations indicate the necessity for higher-order asymmetries to explain the interferometric signals, which is further supported by a MATISSE snapshot image reconstruction. The chromatic interferometric data reveal the likely need for higher-order asymmetries to explain the inner disk of HD~100453, suggesting a possible origin in dynamic interactions or disk instabilities. Coordinated multi-wavelength infrared interferometric observations with GRAVITY and MATISSE will be crucial to confirm these findings and uncover its underlying nature.

astro-ph.SR↗

arXiv2025

The MATISSE view of the inner region of the RY Tau protoplanetary disk

The T-Tauri type young stellar object RY Tau exhibits a dust depleted inner cavity characteristic of a transition disk. We constrain the spatial distribution and mineralogy of dust in the RY Tau protoplanetary disk in the inner few astronomical units using spectrally resolved interferometric observations in the L, M, and N bands obtained with VLTI/MATISSE. Employing a 2D temperature gradient model we estimate the orientation of the inner disk finding no evidence of significant misalignment between the inner and outer disk of RY Tau. Successively, we analyze the chemical composition of silicates depending on spatial region in the disk and identify several silicate species commonly found in protoplanetary disks. Additionally, a depletion of amorphous dust grains toward the central protostar is observed. Monte Carlo radiative transfer simulations show that hot dust close to the protostar and in the line of sight to the observer, either in the uppermost disk layers of a strongly flared disk or in a dusty envelope, is necessary to model the observations. The shadow cast by a dense innermost disk midplane on the dust further out explains the observed closure phases in the L band and to some extent in the M band. However, the closure phases in the N band are underestimated by our model, hinting at an additional asymmetry in the flux density distribution not visible at shorter wavelengths.

astro-ph.EP↗

arXiv2025

Multi-band infrared imaging reveals dusty spiral arcs around the binary B[e] star 3 Puppis

3 Puppis is the brightest known B[e] star. Recent work classifies this A-type object as a supergiant, yet the impact of its binarity on the circumstellar environment (CE) remains hard to characterize. To resolve its dusty region at 5-10 mas, we obtained mid-IR interferometric observations with VLTI/MATISSE over 3-12 {\mu}m. Because the (u,v) coverage supports imaging, we introduce a statistical interferometric-imaging workflow based on MiRA to generate averaged images: this systematic approach enables the selection of an optimal set of reconstructions, improving the robustness and fidelity of the recovered features. We also use SPARCO, an independent tool well suited to bright central objects embedded in fainter extended emission. Images from both tools in the L, M, and N bands agree and reveal an asymmetric, elongated feature ~17 mas (~10 au at 631 pc) southeast of the star with ~20% density contrast. A second northwest asymmetry and a skewed inner rim are detected. Simple geometric modelling, guided by the MATISSE images, constrains the morphology, location, and flux of the CE and its asymmetries. The images are consistent with earlier VLTI measurements but expose a more complex CE with large-scale clumps in the southeast and northwest parts of the disc. Hydrodynamic modelling indicates that tidal spiral-wake perturbations from the central binary, dynamically excited at Lindblad resonances in the circumbinary disc, best explain the radial extent and curvature of the elongated structures seen in all bands.

astro-ph.SR↗

arXiv2025

First Light for the GRAVITY+ Adaptive Optics: Extreme Adaptive Optics for the Very Large Telescope Interferometer

GRAVITY+ improves by orders of magnitude the sensitivity, sky-coverage and contrast of the Very Large Telescope Interferometer (VLTI). A central part of this project is the development of Gravity Plus Adaptive Optics (GPAO), a dedicated high-order and laser-guide star Adaptive Optics (AO) system for VLTI. GPAO consists of four state-of-the-art AO systems equipping all 8m-class Unit Telescopes (UTs) for the wavefront correction of the VLTI instruments. It offers both visible and infrared Natural Guide Star (NGS) and Laser Guide Star (LGS) operations. The paper presents the design, operations and performances of GPAO. We illustrate the improvement brought by GPAO with interferometric observations obtained during the commissioning of the NGS mode end-2024. These science results include the first optical interferometry observations of a redshift $z\sim4$ quasar, the spectroscopy of a cool brown-dwarf with magnitude $K\sim 21.0$, the first observations of a Class I young star with GRAVITY, and the first sub-micro arcsecond differential astrometry in the optical. Together with the entire GRAVITY+ project, the implementation of GPAO is a true paradigm shift for observing the optical Universe at very high angular resolution.

astro-ph.IM↗

arXiv2025

The mid-infrared spectrum of $\beta$ Pictoris b. First VLTI/MATISSE interferometric observations of an exoplanet

Few spectra of directly-imaged exoplanets have been obtained in the mid-infrared (> 3 $\mu$m). This region is particularly rich in molecular spectral signatures, whose measurements can help recover atmospheric parameters and provide a better understanding of giant planet formation and atmospheric dynamics. In the past years, exoplanet interferometry with the VLTI/GRAVITY instrument has provided medium-resolution spectra of a dozen substellar companions in the near infrared. The 100-meter interferometric baselines allow for the stellar and planetary signals to be efficiently disentangled at close angular separations (< 0.3''). We aim to extend this technique to the mid-infrared using MATISSE, the VLTI's mid-infrared spectro-interferometer. We take advantage of the fringe tracking and off-axis pointing capabilities recently brought by the GRA4MAT upgrade. Using this new mode, we observed the giant planet $\beta$ Pictoris b in L and M bands (2.75-5 $\mu$m) at a spectral resolution of 500. We developed a method to correct chromatic dispersion and non-common paths effects in the fringe phase and modelled the planet astrometry and stellar contamination. We obtained a high-signal-to-noise spectrum of $\beta$ Pictoris b, showing the planet continuum in L (for the first time) and M bands, which contains broad absorption features of H$_2$O and CO. In conjunction with a new GRAVITY spectrum, we modelled it with the ForMoSA nested sampling tool and the Exo-REM grid of atmospheric models, and found a solar carbon-to-oxygen ratio in the planet atmosphere. This study opens the way to the characterization of fainter and closer-in planets with MATISSE, which could complement the JWST at angular separations too close for it to obtain exoplanet spectra. Starting in 2025, the new adaptive optics system brought by the GRAVITY+ upgrade will further extend the detection limits of MATISSE.

astro-ph.EP↗

arXiv2024

GRAVITY+ Wavefront Sensors: High-Contrast, Laser Guide Star, Adaptive Optics systems for the VLTI

We present the Wavefront Sensor units of the Gravity Plus Adaptive Optics (GPAO) system, which will equip all 8m class telescopes of the VLTI and is an instrumental part of the GRAVITY+ project. It includes two modules for each Wavefront Sensor unit: a Natural Guide Star sensor with high-order 40x40 Shack-Hartmann and a Laser Guide Star 30x30 sensor. The state-of-the-art AO correction will considerably improve the performance for interferometry, in particular high-contrast observations for NGS observations and all-sky coverage with LGS, which will be implemented for the first time on VLTI instruments. In the following, we give an overview of the Wavefront Sensor units system after completion of their integration and characterization.

astro-ph.IM↗

arXiv2024

GRAVITY for MATISSE -- Improving the MATISSE performance with the GRAVITY fringe tracker

Context: MATISSE, the mid-infrared spectro-imaging instrument of VLTI, was designed to deliver its advertised performance when paired with an external second generation fringe tracker. Science observation started in 2019, demonstrating imaging capabilities and faint science target observations. Now, The GRAVITY fringe tracker stabilizes the MATISSE fringes which allows using all spectroscopic modes and improves sensitivity and data accuracy. Aims: We present how the MATISSE and GRAVITY instruments were adapted to make the GRAVITY fringe tracker work with MATISSE, under the umbrella of the aptly-named GRA4MAT project, led by ESO in collaboration with the two instrument consortia. Methods: We detail the software modifications needed to implement an acquisition and observing sequence specific to GRA4MAT, including simultaneous fringe tracking and chopping and a narrow off-axis capability inspired by the galactic center and exoplanet capability of GRAVITY. We explain the modified data collection and reduction processes. We show how we leveraged the recent fringe tracker upgrade to implement features specific to its use with MATISSE, e.g. fringe jumps mitigation with an improved group delay control and simultaneous fringe tracking and chopping with a new state machine. Results: We successfully demonstrate significant improvements to the MATISSE instrument. Observations can now be performed at higher spectral resolutions of up to $R\sim3300$ and across the full LM bands at once. Long detector integration times, made possible with stabilized fringes, have improved the LM-bands sensitivity by a factor of 10. Low flux biases in coherently-reduced N-band data have been eliminated. The L-band transfer function is now higher and more stable. We finally illustrate the scientific potential of GRA4MAT with a preview of the first exoplanet observation made by MATISSE on $\beta$ Pictoris b.

astro-ph.IM↗

arXiv2024

A dynamical measure of the black hole mass in a quasar 11 billion years ago

Tight relationships exist in the local universe between the central stellar properties of galaxies and the mass of their supermassive black hole. These suggest galaxies and black holes co-evolve, with the main regulation mechanism being energetic feedback from accretion onto the black hole during its quasar phase. A crucial question is how the relationship between black holes and galaxies evolves with time; a key epoch to probe this relationship is at the peaks of star formation and black hole growth 8-12 billion years ago (redshifts 1-3). Here we report a dynamical measurement of the mass of the black hole in a luminous quasar at a redshift of 2, with a look back time of 11 billion years, by spatially resolving the broad line region. We detect a 40 micro-arcsecond (0.31 pc) spatial offset between the red and blue photocenters of the H$\alpha$ line that traces the velocity gradient of a rotating broad line region. The flux and differential phase spectra are well reproduced by a thick, moderately inclined disk of gas clouds within the sphere of influence of a central black hole with a mass of 3.2x10$^{8}$ solar masses. Molecular gas data reveal a dynamical mass for the host galaxy of 6x10$^{11}$ solar masses, which indicates an under-massive black hole accreting at a super-Eddington rate. This suggests a host galaxy that grew faster than the supermassive black hole, indicating a delay between galaxy and black hole formation for some systems.

astro-ph.GA↗

arXiv2024

Images of Betelgeuse with VLTI/MATISSE across the Great Dimming

From Nov. 2019 to May 2020, the red supergiant star Betelgeuse experienced an unprecedented drop of brightness in the visible domain called the great dimming event. Large atmospheric dust clouds and large photospheric convective features are suspected to be responsible for it. To better understand the dimming event, we used mid-infrared long-baseline spectro-interferometric measurements of Betelgeuse taken with the VLTI/MATISSE instrument before (Dec. 2018), during (Feb. 2020), and after (Dec. 2020) the GDE. We present data in the 3.98 to 4.15\,$\mu$m range to cover SiO spectral features molecules as well as adjacent continuum. We have employed geometrical models, image reconstruction, as well as radiative transfer models to monitor the spatial distribution of SiO over the stellar surface. We find a strongly in-homogeneous spatial distribution of SiO that appears to be looking very different between our observing epochs, indicative of a vigorous activity in the stellar atmosphere. The contrast of our images is small in the pseudo-continuum for all epochs, implying that our MATISSE observations support both cold spot and dust cloud model.

astro-ph.SR↗

arXiv2022

Upgrading the high contrast imaging facility SPHERE: science drivers and instrument choices

SPHERE+ is a proposed upgrade of the SPHERE instrument at the VLT, which is intended to boost the current performances of detection and characterization for exoplanets and disks. SPHERE+ will also serve as a demonstrator for the future planet finder (PCS) of the European ELT. The main science drivers for SPHERE+ are 1/ to access the bulk of the young giant planet population down to the snow line ($3-10$ au), to bridge the gap with complementary techniques (radial velocity, astrometry); 2/ to observe fainter and redder targets in the youngest ($1-10$\,Myr) associations compared to those observed with SPHERE to directly study the formation of giant planets in their birth environment; 3/ to improve the level of characterization of exoplanetary atmospheres by increasing the spectral resolution in order to break degeneracies in giant planet atmosphere models. Achieving these objectives requires to increase the bandwidth of the xAO system (from $\sim$1 to 3\,kHz) as well as the sensitivity in the infrared (2 to 3\,mag). These features will be brought by a second stage AO system optimized in the infrared with a pyramid wavefront sensor. As a new science instrument, a medium resolution integral field spectrograph will provide a spectral resolution from 1000 to 5000 in the J and H bands. This paper gives an overview of the science drivers, requirements and key instrumental trade-off that were done for SPHERE+ to reach the final selected baseline concept.

astro-ph.IM↗

arXiv2022

Locating dust and molecules in the inner circumstellar environment of R~Sculptoris with MATISSE

AGB stars are one of the main sources of dust production in the Galaxy. However, it is not clear what this process looks like and where the dust is condensing in the circumstellar environment. By characterizing the location of the dust and the molecules in the close environment of an AGB star, we aim to achieve a better understanding the history of the dust formation process. We observed the carbon star R Scl with the VLTI-MATISSE instrument in L- and N-bands. The high angular resolution of the VLTI observations, combined with a large uv-plane coverage allowed us to use image reconstruction methods. To constrain the dust and molecules' location, we used two different methods: MIRA image reconstruction and the 1D code RHAPSODY. We found evidence of C2H2 and HCN molecules between 1 and 3.4 Rstar which is much closer to the star than the location of the dust (between 3.8 and 17.0 Rstar). We also estimated a mass-loss rate of 1.2+-0.4x10-6 Msun per yr. In the meantime, we confirmed the previously published characteristics of a thin dust shell, composed of amorphous carbon (amC) and silicon carbide (SiC). However, no clear SiC feature has been detected in the MATISSE visibilities. This might be caused by molecular absorption that can affect the shape of the SiC band at 11.3 micron. The appearance of the molecular shells is in good agreement with predictions from dynamical atmosphere models. For the first time, we co-located dust and molecules in the environment of an AGB star. We confirm that the molecules are located closer to the star than the dust. The MIRA images unveil the presence of a clumpy environment in the fuzzy emission region beyond 4.0 Rstar. Furthermore, with the available dynamic range and angular resolution, we did not detect the presence of a binary companion. Additional observations combining MATISSE and SAM-VISIR instrument should enable this detection in future studies.

astro-ph.SR↗

arXiv2022

First Light for GRAVITY Wide: Large Separation Fringe Tracking for the Very Large Telescope Interferometer

GRAVITY+ is the upgrade of GRAVITY and the Very Large Telescope Interferometer (VLTI) with wide-separation fringe tracking, new adaptive optics, and laser guide stars on all four 8~m Unit Telescopes (UTs), for ever fainter, all-sky, high contrast, milliarcsecond interferometry. Here we present the design and first results of the first phase of GRAVITY+, called GRAVITY Wide. GRAVITY Wide combines the dual-beam capabilities of the VLTI and the GRAVITY instrument to increase the maximum separation between the science target and the reference star from 2 arcseconds with the 8 m UTs up to several 10 arcseconds, limited only by the Earth's turbulent atmosphere. This increases the sky-coverage of GRAVITY by two orders of magnitude, opening up milliarcsecond resolution observations of faint objects, and in particular the extragalactic sky. The first observations in 2019 - 2022 include first infrared interferometry of two redshift $z\sim2$ quasars, interferometric imaging on the binary system HD 105913A, and repeated observations of multiple star systems in the Orion Trapezium Cluster. We find the coherence loss between the science object and fringe-tracking reference star well described by the turbulence of the Earth's atmosphere. We confirm that the larger apertures of the UTs result in higher visibilities for a given separation due to larger overlap of the projected pupils on sky and give predictions for visibility loss as a function of separation to be used for future planning.

astro-ph.IM↗

arXiv2022

The disk of FU Orionis viewed with MATISSE/VLTI: first interferometric observations in $L$ and $M$ bands

The disk of FU Orionis is marginally resolved with MATISSE, suggesting that the region emitting in the thermal infrared is rather compact. An upper limit of $\sim1.3\pm0.1$ mas (in $L$) can be given for the diameter of the disk region probed in the $L$ band, corresponding to 0.5 au at the adopted Gaia EDR3 distance. This represents the hot, gaseous region of the accretion disk. The $N$-band data indicate that the dusty passive disk is silicate-rich. Only the innermost region of said dusty disk is found to emit strongly in the $N$ band, and it is resolved at an angular size of $\sim5$ mas, which translates to a diameter of about 2 au. The observations therefore place stringent constraints for the outer radius of the inner accretion disk. Dust radiative transfer simulations with RADMC-3D provide adequate fits to the spectral energy distribution from the optical to the submillimeter and to the interferometric observables when opting for an accretion rate $\dot{M}\sim 2\times 10^{-5}\, M_\odot$ yr$^{-1}$ and assuming $M_*=0.6\, M_\odot$. Most importantly, the hot inner accretion disk's outer radius can be fixed at 0.3 au. The outer radius of the dusty disk is placed at 100 au, based on constraints from scattered-light images in the literature. The dust mass contained in the disk is $2.4\times10^{-4}\, M_\odot$, and for a typical gas-to-dust ratio of 100, the total mass in the disk is approximately 0.02 $M_\odot$. We did not find any evidence for a nearby companion in the current interferometric data, and we tentatively explored the case of disk misalignment. For the latter, our modeling results suggest that the disk orientation is similar to that found in previous imaging studies by ALMA. Should there be an asymmetry in the very compact, inner accretion disk, this might be resolved at even smaller spatial scales ($\leq1$ mas).

astro-ph.SR↗

arXiv2022

Application limit of the photocentre displacement to fundamental stellar parameters of fast rotators -- Illustration on the edge-on fast rotator Regulus

Differential Interferometry allows to obtain the differential visibility and phase, in addition to the spectrum. The differential phase contains important information about the structure and motion of stellar photosphere such as stellar spots and non-radial pulsations, and particularly the rotation. Thus, this interferometric observable strongly helps to constrain the stellar fundamental parameters of fast rotators. The spectro-astrometry mainly uses the photocentre displacements, which is a first approximation of the differential phase, and is applicable only for unresolved or marginally objects. We study here the sensitivity of relevant stellar parameters to the simulated photocentres using the SCIROCCO code: a semi-analytical algorithm dedicated to fast rotators, applied to two theoretical modeling stars based on Achernar and Regulus, in order to classify the importance of these parameters and their impact on the modeling. We compare our simulations with published VLTI/AMBER data. This current work sets the limits of application of photocentre displacements to fast rotators, and under which conditions we can use the photocentres and/or the differential phase, through a pre-established physical criterion. To validate our theoretical study, we apply our method of analysis on observed data of the edge-on fast rotator Regulus. For unresolved targets, with a visibility $V\sim 1$, the photocentre can constrain the main stellar fundamental parameters of fast rotators, whereas from marginally resolved objects ($0.8 \leq V < 1$), mainly the rotation axis position angle ($\rm PA_{\rm rot}$) can be directly deduced from the vectorial photocentre displacement, which is very important for young cluster studies.

astro-ph.SR↗

arXiv2022

Improving the diameters of interferometric calibrators with MATISSE

A good knowledge of the angular diameters of stars used to calibrate the observables in stellar interferometry is fundamental. As the available precision for giant stars is worse than the required per cent level, we aim to improve the knowledge of many diameters using MATISSE (Multiple AperTure mid-Infrared SpectroScopic Experiment) data in its different instrumental configurations. Using the squared visibility MATISSE observable, we compute the angular diameter value, which ensures the best-fitting curves, assuming an intensity distribution of a uniform disc. We take into account that the transfer function varies over the wavelength and is different from one instrumental configuration to another. The uncertainties on the diameters are estimated using the residual bootstrap method. Using the low spectral resolution mode in the L band, we observed a set of 35 potential calibrators selected in the Mid-infrared stellar Diameter and Flux Compilation Catalogue with diameters ranging from about 1 to 3 mas. We reach a precision on the diameter estimates in the range 0.6 per cent to 4.1 per cent. The study of the stability of the transfer function in visibility over two nights makes us confident in our results. In addition, we identify one star, 75 Vir initially present in the calibrator lists, for which our method does not converge, and prove to be a binary star. This leads us to the conclusion that our method is actually necessary to improve the quality of the astrophysical results obtained with MATISSE, and that it can be used as a useful tool for 'bad calibrator' detection.

astro-ph.IM↗

arXiv2021

The extended atmosphere and circumstellar environment of the cool evolved star VX Sagittarii as seen by MATISSE

Context. VX Sgr is a cool, evolved, and luminous red star whose stellar parameters are difficult to determine, which affects its classification. Aims. We aim to spatially resolve the photospheric extent as well as the circumstellar environment. Methods. We used interferometric observations obtained with the MATISSE instrument in the L (3 to 4 {\mu}m), M (4.5 to 5 {\mu}m), and N (8 to 13 {\mu}m) bands. We reconstructed monochromatic images using the MIRA software. We used 3D radiation-hydrodynamics (RHD) simulations carried out with CO5BOLD and a uniform disc model to estimate the apparent diameter and interpret the stellar surface structures. Moreover, we employed the radiative transfer codes Optim3D and Radmc3D to compute the spectral energy distribution for the L, M, and N bands, respectively. Results. MATISSE observations unveil, for the first time, the morphology of VX Sgr across the L, M, and N bands. The reconstructed images show a complex morphology with brighter areas whose characteristics depend on the wavelength probed. We measured the angular diameter as a function of the wavelength and showed that the photospheric extent in the L and M bands depends on the opacity through the atmosphere. In addition to this, we also concluded that the observed photospheric inhomogeneities can be interpreted as convection-related surface structures. The comparison in the N band yielded a qualitative agreement between the N band spectrum and simple dust radiative transfer simulations. However, it is not possible to firmly conclude on the interpretation of the current data because of the difficulty in constraing the model parameters using the limited accuracy of our absolute flux calibration. Conclusions. MATISSE observations and the derived reconstructed images unveil the appearance of the stellar surface and circumstellar environment across a very large spectral domain for the first time.

astro-ph.SR↗