arXiv subjects

S. Lagomarsino

Publications and source records attributed to S. Lagomarsino.

9 recordsLinked to original sources

arXiv2021

Scalable creation of silicon-vacancy color centers in diamond by ion implantation through a 1-$μ$m pinhole

The controlled creation of quantum emitters in diamond represents a major research effort in the fabrication of single-photon devices. Here, we present the scalable production of silicon-vacancy (SiV) color centers in single-crystal diamond by ion implantation. The lateral position of the SiV is spatially controlled by a 1-$μ$m pinhole placed in front of the sample, which can be moved nanometer precise using a piezo stage. The initial implantation position is controlled by monitoring the ion beam position with a camera. Hereby, silicon ions are implanted at the desired spots in an area comparable to the diffraction limit. We discuss the role of ions scattered by the pinhole and the activation yield of the SiV color centers for the creation of single quantum emitters.

quant-ph↗

arXiv2021

Photoluminescence of nitrogen-vacancy and silicon-vacancy color centers in phosphorus-doped diamond at room and higher temperatures

Phosphorus-doped diamond is relevant for applications in sensing, optoelectronics and quantum photonics, since the unique optical properties of color centers in diamond can be combined with the n-type conductivity attained by the inclusion of phosphorus. Here, we investigate the photoluminescence signal of the nitrogen-vacancy and silicon-vacancy color centers in phosphorus-doped diamond as a function of temperature starting from ambient conditions up to about 100$^\circ$ Celsius, focusing on the zero-phonon line (ZPL). We find that the wavelength and width of the ZPL of the two color centers exhibit a comparable dependence on temperature, despite the strong difference in the photoluminescence spectra. Moreover, the temperature sensitivity of the ZPL of the silicon-vacancy center is not significantly affected by phosphorus-doping, as we infer by comparison with silicon-vacancy centers in electronic-grade single-crystal diamond.

physics.app-ph↗

arXiv2020

Optical properties of silicon-implanted polycrystalline diamond membranes

We investigate the optical properties of polycrystalline diamond membranes containing silicon-vacancy (SiV) color centers in combination with other nano-analytical techniques. We analyze the correlation between the Raman signal, the SiV emission, and the background luminescence in the crystalline grains and in the grain boundaries, identifying conditions for the addressability of single SiV centers. Moreover, we perform a scanning transmission electron microscopy (STEM) analysis, which associates the microscopic structure of the membranes and the evolution of the diamond crystal along the growth direction with the photoluminescence properties, as well as a time-of-flight secondary ion mass spectrometry (ToF-SIMS) to address the distribution of silicon in implanted and un-implanted membranes. The results of the STEM and ToF-SIMS studies are consistent with the outcome of the optical measurements and provide useful insight into the preparation of polycrystalline samples for quantum nano-optics.

physics.app-ph↗

arXiv2019

Recent Results from Polycrystalline CVD Diamond Detectors

Diamond is a material in use at many nuclear and high energy facilities due to its inherent radiation tolerance and ease of use. We have characterized detectors based on chemical vapor deposition (CVD) diamond before and after proton irradiation. We present preliminary results of the spatial resolution of unirradiated and irradiated CVD diamond strip sensors. In addition, we measured the pulse height versus particle rate of unirradiated and irradiated polycrystalline CVD (pCVD) diamond pad detectors up to a particle flux of $20\,\mathrm{MHz/cm^2}$ and a fluence up to $4 \times 10^{15}\,n/\mathrm{cm^2}$.

physics.ins-det↗

arXiv2016

Finite element analysis of ion-implanted diamond surface swelling

We present experimental results and numerical Finite Element analysis to describe surface swelling due to the creation of buried graphite-like inclusions in diamond substrates subjected to MeV ion implantation. Numerical predictions are compared to experimental data for MeV proton and helium implantations, performed with scanning ion microbeams. Swelling values are measured with white light interferometric profilometry in both cases. Simulations are based on a model which accounts for the through-the-thickness variation of mechanical parameters in the material, as a function of ion type, fluence and energy. Surface deformation profiles and internal stress distributions are analyzed and numerical results are seen to adequately fit experimental data. Results allow us to draw conclusions on structural damage mechanisms in diamond for different MeV ion implantations.

cond-mat.mtrl-sci↗

arXiv2016

Controlled variation of the refractive index in ion-damaged diamond

A fine control of the variation of the refractive index as a function of structural damage is essential in the fabrication of diamond-based optical and photonic devices. We report here about the variation of the real part of the refractive index at lambda=632.8 nm in high quality single crystal diamond damaged with 2 and 3 MeV protons at low-medium fluences (10^13 - 10^17 ions cm^-2). After implanting the samples in 125x125 um^2 areas with a raster scanning ion microbeam, the variation of optical thickness of the implanted regions was measured with laser interferometric microscopy. The results were analyzed with a model based on the specific damage profile. The technique allows the direct fabrication of optical structures in bulk diamond based on the localized variation of the refractive index, which will be explored in future works.

cond-mat.mtrl-sci↗

arXiv2016

Micro-beam and pulsed laser beam techniques for the micro-fabrication of diamond surface and bulk structures

Micro-fabrication in diamond is involved in a wide set of emerging technologies, exploiting the exceptional characteristics of diamond for application in bio-physics, photonics, radiation detection. Micro ion-beam irradiation and pulsed laser irradiation are complementary techniques, which permit the implementation of complex geometries, by modification and functionalization of surface and/or bulk material, modifying the optical, electrical and mechanical characteristics of the material. In this article we summarize the work done in Florence (Italy) concerning ion beam and pulsed laser beam micro-fabrication in diamond.

cond-mat.mtrl-sci↗

arXiv2016

Evidence of light guiding in ion-implanted diamond

We demonstrate the feasibility of fabricating light-waveguiding microstructures in bulk single-crystal diamond by means of direct ion implantation with a scanning microbeam, resulting in the modulation of the refractive index of the ion-beam damaged crystal. Direct evidence of waveguiding through such buried microchannels is obtained with a phase-shift micro-interferometric method allowing the study of the multi-modal structure of the propagating electromagnetic field. The possibility of defining optical and photonic structures by direct ion writing opens a range of new possibilities in the design of quantum-optical devices in bulk single crystal diamond.

physics.optics↗

arXiv2016

Complex refractive index variation in proton-damaged diamond

An accurate control of the optical properties of single crystal diamond during microfabrication processes such as ion implantation plays a crucial role in the engineering of integrated photonic devices. In this work we present a systematic study of the variation of both real and imaginary parts of the refractive index of single crystal diamond, when damaged with 2 and 3 MeV protons at low-medium fluences (range: 10^15 - 10^17 cm^-2). After implanting in 125x125 um^2 areas with a scanning ion microbeam, the variation of optical pathlength of the implanted regions was measured with laser interferometric microscopy, while their optical transmission was studied using a spectrometric set-up with micrometric spatial resolution. On the basis of a model taking into account the strongly non-uniform damage profile in the bulk sample, the variation of the complex refractive index as a function of damage density was evaluated.

cond-mat.mtrl-sci↗