arXiv subjects

S. M. Girvin

Publications and source records attributed to S. M. Girvin.

At least 19 recordsLinked to original sources

arXiv2025

Co-Designing Spectral Transformation Oracles with Hybrid Oscillator-Qubit Quantum Processors: From Algorithms to Compilation

We co-design a family of quantum eigenvalue transformation oracles that can be efficiently implemented on hybrid discrete/continuous-variable (qubit/qumode) hardware. To illustrate the oracle's representation-theoretic power and near-term experimental accessibility, we encode a Gaussian imaginary time evolution spectral filter. As a result, we define a continuous linear combination of unitaries block-encoding. Due to the ancillary qumode's infinite-dimensional nature, continuous variable qumodes constitute a powerful compilation tool for encoding continuous spectral functions without discretization errors while minimizing resource requirements. We then focus on the ubiquitous task of preparing eigenstates in quantum spin models. For completeness, we provide an end-to-end compilation which expresses high-level oracles in terms of an experimentally realizable instruction set architecture in both 1D and 2D. Finally, we examine the leading-order effects of physical errors and highlight open research directions. Our algorithms scale linearly with the spatial extent of the target system and are applicable to both near-term and large-scale quantum processors.

quant-ph↗

arXiv2025

Leveraging Hamiltonian Simulation Techniques to Compile Operations on Bosonic Devices

Circuit QED enables the combined use of qubits and oscillator modes. Despite a variety of available gate sets, many hybrid qubit-boson (i.e., oscillator) operations are realizable only through optimal control theory (OCT) which is oftentimes intractable and uninterpretable. We introduce an analytic approach with rigorously proven error bounds for realizing specific classes of operations via two matrix product formulas commonly used in Hamiltonian simulation, the Lie--Trotter and Baker--Campbell--Hausdorff product formulas. We show how this technique can be used to realize a number of operations of interest, including polynomials of annihilation and creation operators, i.e., $a^p {a^\dagger}^q$ for integer $p, q$. We show examples of this paradigm including: obtaining universal control within a subspace of the entire Fock space of an oscillator, state preparation of a fixed photon number in the cavity, simulation of the Jaynes--Cummings Hamiltonian, simulation of the Hong-Ou-Mandel effect and more. This work demonstrates how techniques from Hamiltonian simulation can be applied to better control hybrid boson-qubit devices.

quant-ph↗

arXiv2024

Faulty towers: recovering a functioning quantum random access memory in the presence of defective routers

Proposals for quantum random access memory (QRAM) generally have a binary-tree structure, and thus require hardware that is exponential in the depth of the QRAM. For solid-state based devices, a fabrication yield that is less than $100\%$ implies that certain addresses at the bottom of the tree become inaccessible if a router in the unique path to that address is faulty. We discuss how to recover a functioning QRAM in the presence of faulty routers. We present the \texttt{IterativeRepair} algorithm, which constructs QRAMs layer by layer until the desired depth is reached. This algorithm utilizes ancilla flag qubits which reroute queries to faulty routers. We present a classical algorithm \texttt{FlagQubitMinimization} that attempts to minimize the required number of such ancilla. For a router failure rate of $1\%$ and a QRAM of depth $n=13$, we expect that on average 430 addresses need repair: we require only 1.5 ancilla flag qubits on average to perform this rerouting.

quant-ph↗

arXiv2024

Constant-depth preparation of matrix product states with adaptive quantum circuits

Adaptive quantum circuits, which combine local unitary gates, midcircuit measurements, and feedforward operations, have recently emerged as a promising avenue for efficient state preparation, particularly on near-term quantum devices limited to shallow-depth circuits. Matrix product states (MPS) comprise a significant class of many-body entangled states, efficiently describing the ground states of one-dimensional gapped local Hamiltonians and finding applications in a number of recent quantum algorithms. Recently, it was shown that the AKLT state -- a paradigmatic example of an MPS -- can be exactly prepared with an adaptive quantum circuit of constant-depth, an impossible feat with local unitary gates due to its nonzero correlation length [Smith et al., PRX Quantum 4, 020315 (2023)]. In this work, we broaden the scope of this approach and demonstrate that a diverse class of MPS can be exactly prepared using constant-depth adaptive quantum circuits, outperforming optimal preparation protocols that rely on unitary circuits alone. We show that this class includes short- and long-ranged entangled MPS, symmetry-protected topological (SPT) and symmetry-broken states, MPS with finite Abelian, non-Abelian, and continuous symmetries, resource states for MBQC, and families of states with tunable correlation length. Moreover, we illustrate the utility of our framework for designing constant-depth sampling protocols, such as for random MPS or for generating MPS in a particular SPT phase. We present sufficient conditions for particular MPS to be preparable in constant time, with global on-site symmetry playing a pivotal role. Altogether, this work demonstrates the immense promise of adaptive quantum circuits for efficiently preparing many-body entangled states and provides explicit algorithms that outperform known protocols to prepare an essential class of states.

quant-ph↗

arXiv2024

Quantum random access memory architectures using superconducting cavities

Quantum random access memory (QRAM) is a common architecture resource for algorithms with many proposed applications, including quantum chemistry, windowed quantum arithmetic, unstructured search, machine learning, and quantum cryptography. Here we propose two bucket-brigade QRAM architectures based on high-coherence superconducting resonators, which differ in their realizations of the conditional-routing operations. In the first, we directly construct controlled-$\mathsf{SWAP}$ ($\textsf{CSWAP}$) operations, while in the second we utilize the properties of giant-unidirectional emitters (GUEs). For both architectures we analyze single-rail and dual-rail implementations of a bosonic qubit. In the single-rail encoding we can detect first-order ancilla errors, while the dual-rail encoding additionally allows for the detection of photon losses. For parameter regimes of interest the post-selected infidelity of a QRAM query in a dual-rail architecture is nearly an order of magnitude below that of a corresponding query in a single-rail architecture. These findings suggest that dual-rail encodings are particularly attractive as architectures for QRAM devices in the era before fault tolerance.

quant-ph↗

arXiv2023

Error Suppression for Arbitrary-Size Black Box Quantum Operations

Efficient suppression of errors without full error correction is crucial for applications with NISQ devices. Error mitigation allows us to suppress errors in extracting expectation values without the need for any error correction code, but its applications are limited to estimating expectation values, and cannot provide us with high-fidelity quantum operations acting on arbitrary quantum states. To address this challenge, we propose to use error filtration (EF) for gate-based quantum computation, as a practical error suppression scheme without resorting to full quantum error correction. The result is a general-purpose error suppression protocol where the resources required to suppress errors scale independently of the size of the quantum operation, and does not require any logical encoding of the operation. The protocol provides error suppression whenever an error hierarchy is respected -- that is, when the ancilliary cSWAP operations are less noisy than the operation to be corrected. We further analyze the application of EF to quantum random access memory, where EF offers hardware-efficient error suppression.

quant-ph↗

arXiv2023

High-fidelity parametric beamsplitting with a parity-protected converter

Fast, high-fidelity operations between microwave resonators are an important tool for bosonic quantum computation and simulation with superconducting circuits. An attractive approach for implementing these operations is to couple these resonators via a nonlinear converter and actuate parametric processes with RF drives. It can be challenging to make these processes simultaneously fast and high fidelity, since this requires introducing strong drives without activating parasitic processes or introducing additional decoherence channels. We show that in addition to a careful management of drive frequencies and the spectrum of environmental noise, leveraging the inbuilt symmetries of the converter Hamiltonian can suppress unwanted nonlinear interactions, preventing converter-induced decoherence. We demonstrate these principles using a differentially-driven DC-SQUID as our converter, coupled to two high-Q microwave cavities. Using this architecture, we engineer a highly-coherent beamsplitter and fast ($\sim$ 100 ns) swaps between the cavities, limited primarily by their intrinsic single-photon loss. We characterize this beamsplitter in the cavities' joint single-photon subspace, and show that we can detect and post-select photon loss events to achieve a beamsplitter gate fidelity exceeding 99.98$\%$, which to our knowledge far surpasses the current state of the art.

quant-ph↗

arXiv2023

A high on-off ratio beamsplitter interaction for gates on bosonically encoded qubits

Encoding a qubit in a high quality superconducting microwave cavity offers the opportunity to perform the first layer of error correction in a single device, but presents a challenge: how can quantum oscillators be controlled while introducing a minimal number of additional error channels? We focus on the two-qubit portion of this control problem by using a 3-wave mixing coupling element to engineer a programmable beamsplitter interaction between two bosonic modes separated by more than an octave in frequency, without introducing major additional sources of decoherence. Combining this with single-oscillator control provided by a dispersively coupled transmon provides a framework for quantum control of multiple encoded qubits. The beamsplitter interaction $g_\text{bs}$ is fast relative to the timescale of oscillator decoherence, enabling over $10^3$ beamsplitter operations per coherence time, and approaching the typical rate of the dispersive coupling $χ$ used for individual oscillator control. Further, the programmable coupling is engineered without adding unwanted interactions between the oscillators, as evidenced by the high on-off ratio of the operations, which can exceed $10^5$. We then introduce a new protocol to realize a hybrid controlled-SWAP operation in the regime $g_{bs}\approxχ$, in which a transmon provides the control bit for the SWAP of two bosonic modes. Finally, we use this gate in a SWAP test to project a pair of bosonic qubits into a Bell state with measurement-corrected fidelity of $95.5\% \pm 0.2\%$.

quant-ph↗

arXiv2023

Deterministic constant-depth preparation of the AKLT state on a quantum processor using fusion measurements

The ground state of the spin-1 Affleck, Kennedy, Lieb and Tasaki (AKLT) model is a paradigmatic example of both a matrix product state and a symmetry-protected topological phase, and additionally holds promise as a resource state for measurement-based quantum computation. Having a nonzero correlation length, the AKLT state cannot be exactly prepared by a constant-depth unitary circuit composed of local gates. In this work, we demonstrate that this no-go limit can be evaded by augmenting a constant-depth circuit with fusion measurements, such that the total preparation time is independent of system size and entirely deterministic. We elucidate our preparation scheme using the language of tensor networks, and furthermore show that the $\mathbb{Z}_2\times\mathbb{Z}_2$ symmetry of the AKLT state directly affords this speed-up over previously known preparation methods. To demonstrate the practical advantage of measurement-assisted preparation on noisy intermediate-scale quantum (NISQ) devices, we carry out our protocol on an IBM Quantum processor. We measure both the string order and entanglement spectrum of prepared AKLT chains and, employing these as metrics, find improved results over the known (purely unitary) sequential preparation approach. We conclude with a demonstration of quantum teleportation using the AKLT state prepared by our measurement-assisted scheme. This work thus serves to provide an efficient strategy to prepare a specific resource in the form of the AKLT state and, more broadly, experimentally demonstrates the possibility for realizable improvement in state preparation afforded by measurement-based circuit depth reduction strategies on NISQ-era devices.

quant-ph↗

arXiv2022

Real-time quantum error correction beyond break-even

The ambition of harnessing the quantum for computation is at odds with the fundamental phenomenon of decoherence. The purpose of quantum error correction (QEC) is to counteract the natural tendency of a complex system to decohere. This cooperative process, which requires participation of multiple quantum and classical components, creates a special type of dissipation that removes the entropy caused by the errors faster than the rate at which these errors corrupt the stored quantum information. Previous experimental attempts to engineer such a process faced an excessive generation of errors that overwhelmed the error-correcting capability of the process itself. Whether it is practically possible to utilize QEC for extending quantum coherence thus remains an open question. We answer it by demonstrating a fully stabilized and error-corrected logical qubit whose quantum coherence is significantly longer than that of all the imperfect quantum components involved in the QEC process, beating the best of them with a coherence gain of $G = 2.27 \pm 0.07$. We achieve this performance by combining innovations in several domains including the fabrication of superconducting quantum circuits and model-free reinforcement learning.

quant-ph↗

arXiv2022

The squeezed Kerr oscillator: spectral kissing and phase-flip robustness

By applying a microwave drive to a specially designed Josephson circuit, we have realized an elementary quantum optics model, the squeezed Kerr oscillator. This model displays, as the squeezing amplitude is increased, a cross-over from a single ground state regime to a doubly-degenerate ground state regime. In the latter case, the ground state manifold is spanned by Schrödinger-cat states, i.e. quantum superpositions of coherent states with opposite phases. For the first time, having resolved up to the tenth excited state in a spectroscopic experiment, we confirm that the proposed emergent static effective Hamiltonian correctly describes the system, despite its driven character. We also find that the lifetime of the coherent state components of the cat states increases in steps as a function of the squeezing amplitude. We interpret the staircase pattern as resulting from pairwise level kissing in the excited state spectrum. Considering the Kerr-cat qubit encoded in this ground state manifold, we achieve for the first time quantum nondemolition readout fidelities greater than 99%, and enhancement of the phase-flip lifetime by more than two orders of magnitude, while retaining universal quantum control. Our experiment illustrates the crucial role of parametric drive Hamiltonian engineering for hardware-efficient quantum computation.

quant-ph↗

arXiv2022

Stabilizing the Laughlin state of light: dynamics of hole fractionalization

Particle loss is the ultimate challenge for preparation of strongly correlated many-body states of photons. An established way to overcome the loss is to employ a stabilization setup that autonomously injects new photons in place of the lost ones. However, as we show, the effectiveness of such a stabilization setup is compromised for fractional quantum Hall states. There, a hole formed by a lost photon can separate into several remote quasiholes none of which can be refilled by injecting a photon locally. By deriving an exact expression for the steady-state density matrix, we demonstrate that isolated quasiholes proliferate in the steady state which damages the quality of the state preparation. The motion of quasiholes leading to their separation is allowed by a repeated process in which a photon is first lost and then quickly refilled in the vicinity of the quasihole. We develop the theory of this dissipative quasihole dynamics and show that it has diffusive character. Our results demonstrate that fractionalization might present an obstacle for both creation and stabilization of strongly-correlated states with photons.

cond-mat.mes-hall↗

arXiv2022

Engineering Strong Beamsplitter Interaction between Bosonic Modes via Quantum Optimal Control Theory

In continuous-variable quantum computing with qubits encoded in the infinite-dimensional Hilbert space of bosonic modes, it is a difficult task to realize strong and on-demand interactions between the qubits. One option is to engineer a beamsplitter interaction for photons in two superconducting cavities by driving an intermediate superconducting circuit with two continuous-wave drives, as demonstrated in a recent experiment. Here, we show how quantum optimal control theory (OCT) can be used in a systematic way to improve the beamsplitter interaction between the two cavities. We find that replacing the two-tone protocol by a three-tone protocol accelerates the effective beamsplitter rate between the two cavities. The third tone's amplitude and frequency are determined by gradient-free optimization and make use of cavity-transmon sideband couplings. We show how to further improve the three-tone protocol via gradient-based optimization while keeping the optimized drives experimentally feasible. Our work exemplifies how to use OCT to systematically improve practical protocols in quantum information applications.

quant-ph↗

arXiv2022

Drive-induced nonlinearities of cavity modes coupled to a transmon ancilla

High-Q microwave cavity modes coupled to transmon ancillas provide a hardware-efficient platform for quantum computing. Due to their coupling, the cavity modes inherit finite nonlinearity from the transmons. In this work, we theoretically and experimentally investigate how an off-resonant drive on the transmon ancilla modifies the nonlinearities of cavity modes in qualitatively different ways, depending on the interrelation among cavity-transmon detuning, drive-transmon detuning and transmon anharmonicity. For a cavity-transmon detuning that is smaller than or comparable to the drive-transmon detuning and transmon anharmonicity, the off-resonant transmon drive can induce multiphoton resonances among cavity and transmon excitations that strongly modify cavity nonlinearities as drive parameters vary. For a large cavity-transmon detuning, the drive induces cavity-photon-number-dependent ac Stark shifts of transmon levels that translate into effective cavity nonlinearities. In the regime of weak transmon-cavity coupling, the cavity Kerr nonlinearity relates to the third-order nonlinear susceptibility function $χ^{(3)}$ of the driven ancilla. This susceptibility function provides a numerically efficient way of computing the cavity Kerr particularly for systems with many cavity modes controlled by a single transmon. It also serves as a diagnostic tool for identifying undesired drive-induced multiphoton resonance processes. Lastly, we show that by judiciously choosing the drive amplitude, a single off-resonant transmon drive can be used to cancel the cavity self-Kerr nonlinearity or the inter-cavity cross-Kerr. This provides a way of dynamically correcting the cavity Kerr nonlinearity during bosonic operations or quantum error correction protocols that rely on the cavity modes being linear.

quant-ph↗

arXiv2022

Fast Universal Control of an Oscillator with Weak Dispersive Coupling to a Qubit

A controlled evolution generated by nonlinear interactions is required to perform full manipulation of a quantum system, and such control is only coherent when the rate of nonlinearity is large compared to the rate of decoherence. As a result, engineered quantum systems typically rely on a bare nonlinearity much stronger than all decoherence rates, and this hierarchy is usually assumed to be necessary. In this work, we challenge this assumption by demonstrating the universal control of a quantum system where the relevant rate of bare nonlinear interaction is comparable to the fastest rate of decoherence. We do this by introducing a novel noise-resilient protocol for the universal quantum control of a nearly-harmonic oscillator that takes advantage of an in-situ enhanced nonlinearity instead of harnessing a bare nonlinearity. Our experiment consists of a high quality-factor microwave cavity with weak-dispersive coupling to a much lower quality superconducting qubit. By using strong drives to temporarily excite the oscillator, we realize an amplified three-wave-mixing interaction, achieving typical operation speeds over an order of magnitude faster than expected from the bare dispersive coupling. Our demonstrations include preparation of a single-photon state with $98\pm 1(\%)$ fidelity and preparation of squeezed vacuum with a squeezing level of $11.1$ dB, the largest intracavity squeezing reported in the microwave regime. Finally, we also demonstrate fast measurement-free preparation of logical states for the binomial and Gottesman-Kitaev-Preskill (GKP) quantum error-correcting codes.

quant-ph↗

arXiv2022

Ancilla-Error-Transparent Controlled Beam Splitter Gate

In hybrid circuit QED architectures containing both ancilla qubits and bosonic modes, a controlled beam splitter gate is a powerful resource. It can be used to create (up to a controlled-parity operation) an ancilla-controlled SWAP gate acting on two bosonic modes. This is the essential element required to execute the `swap test' for purity, prepare quantum non-Gaussian entanglement and directly measure nonlinear functionals of quantum states. It also constitutes an important gate for hybrid discrete/continuous-variable quantum computation. We propose a new realization of a hybrid cSWAP utilizing `Kerr-cat' qubits -- anharmonic oscillators subject to strong two-photon driving. The Kerr-cat is used to generate a controlled-phase beam splitter (cPBS) operation. When combined with an ordinary beam splitter one obtains a controlled beam-splitter (cBS) and from this a cSWAP. The strongly biased error channel for the Kerr-cat has phase flips which dominate over bit flips. This yields important benefits for the cSWAP gate which becomes non-destructive and transparent to the dominate error. Our proposal is straightforward to implement and, based on currently existing experimental parameters, should achieve controlled beam-splitter gates with high fidelities comparable to current ordinary beam-splitter operations available in circuit QED.

quant-ph↗

arXiv2022

Swap-test interferometry with biased ancilla noise

The Mach--Zehnder interferometer is a powerful device for detecting small phase shifts between two light beams. Simple input states -- such as coherent states or single photons -- can reach the standard quantum limit of phase estimation while more complicated states can be used to reach Heisenberg scaling; the latter, however, require complex states at the input of the interferometer which are difficult to prepare. The quest for highly sensitive phase estimation therefore calls for interferometers with nonlinear devices which would make the preparation of these complex states more efficient. Here, we show that the Heisenberg scaling can be recovered with simple input states (including Fock and coherent states) when the linear mirrors in the interferometer are replaced with controlled-swap gates and measurements on ancilla qubits. These swap tests project the input Fock and coherent states onto NOON and entangled coherent states, respectively, leading to improved sensitivity to small phase shifts in one of the interferometer arms. We perform detailed analysis of ancilla errors, showing that biasing the ancilla towards phase flips offers a great advantage, and perform thorough numerical simulations of a possible implementation in circuit quantum electrodynamics. Our results thus present a viable approach to phase estimation approaching Heisenberg-limited sensitivity.

quant-ph↗

arXiv2021

Quantum control of bosonic modes with superconducting circuits

Bosonic modes have wide applications in various quantum technologies, such as optical photons for quantum communication, magnons in spin ensembles for quantum information storage and mechanical modes for reversible microwave-to-optical quantum transduction. There is emerging interest in utilizing bosonic modes for quantum information processing, with circuit quantum electrodynamics (circuit QED) as one of the leading architectures. Quantum information can be encoded into subspaces of a bosonic superconducting cavity mode with long coherence time. However, standard Gaussian operations (e.g., beam splitting and two-mode squeezing) are insufficient for universal quantum computing. The major challenge is to introduce additional nonlinear control beyond Gaussian operations without adding significant bosonic loss or decoherence. Here we review recent advances in universal control of a single bosonic code with superconducting circuits, including unitary control, quantum feedback control, driven-dissipative control and holonomic dissipative control. Various approaches to entangling different bosonic modes are also discussed.

quant-ph↗