arXiv subjects

S. Massaglia

Publications and source records attributed to S. Massaglia.

At least 19 recordsLinked to original sources

arXiv2026

Simulations of Protostar-Driven Photoionization in Herbig-Haro Jets

Recent studies showed that observations of line emission from shocks in YSO jets require a substantial amount of ionization of the pre-shock matter. Photoionization from X-ray emitted close to the central source may be responsible for the initial ionization fraction. The aim of our work is to study the effect of X-ray photoionization, coming from the vicinity of the central star, on the ionization fraction inside the jet that can be advected at large distances. For this purpose we have performed axisymmetric MHD jet launching simulations including photoionization and optically thin losses using PLUTO. For typical X-ray luminosities in classical T-Tauri stars, we see that the photoionization is responsible for ionizing to 10 % -20 % the jet close to the star.

astro-ph.SR↗

arXiv2024

FR0 jets and recollimation-induced instabilities

The recently discovered population of faint FR0 radiogalaxies has been interpreted as the extension to low power of the classical FRI sources. Their radio emission appears to be concentrated in very compact (pc-scale) cores, any extended emission is very weak or absent and VLBI observations show that jets are already mildly or sub-relativistic at pc scales. Based on these observational properties we propose here that the jets of FR0s are strongly decelerated and disturbed at pc scale by hydrodynamical instabilities.}{With the above scenario in mind, we study the dynamics of a low-power relativistic jet propagating into a confining external medium, focusing on the effects of entrainment and mixing promoted by the instabilities developing at the jet-environment interface downstream of a recollimation shock. We perform a 3D relativistic hydrodynamical simulation of a recollimated jet by means of the state-of-the-art code PLUTO. The jet is initially conical, relativistic (with initial Lorentz Factor $Γ$=5), cold and light with respect to the confining medium, whose pressure is assumed to slowly decline with distance. The magnetic field is assumed to be dynamically unimportant. The 3D simulation shows that, after the first recollimation/reflection shock system, a rapidlygrowing instability develops, as a result of the interplay between recollimation-induced instabilities and Richtmyer-Meshkov modes. In turn, the instabilities promote strong mixing and entrainment that rapidly lead to the deceleration of the jet and spread its momentum to slowly moving, highly turbulent external gas. We argue that this mechanism could account for the peculiarities of the low-power FR0 jets. For outflows with higher power, Lorentz factor or magnetic field, we expect that the destabilizing effects are less effective, allowing the survival of the jet up to the kpc scale, as observed in FRIs.

astro-ph.HE↗

arXiv2021

Making Fanaroff-Riley I radio sources III. The effects of the magnetic field on relativistic jets' propagation and source morphologies

Extragalactic radio sources appear under different morphologies, the most frequent ones are classified as Fanaroff-Riley type I (FR I), typically with lower luminosities, and Fanaroff-Riley type II, (FR II), typically more luminous. This simple classification, however, has many exceptions that we intend to investigate. Following previous analyses in the three-dimensional Hydrodynamic and Magneto-Hydrodynamic limits, we extend the numerical investigation to the Relativistic Magneto-Hydrodynamic regime, to include sources whose jet kinetic power sets in the range that separates FR Is from FR IIs. We consider weakly and mildly relativistic, underdense, supersonic jets that propagate in a stratified medium. In the model, the ambient temperature increases with distance from the jet origin maintaining constant pressure. We present three cases with low, high and intermediate kinetic luminosity that evolve into different morphologies. We find that the resulting morphology can be highly time dependent and that, apart from the jet power, the jet-to-ambient density ratio and the magnetization parameter play a crucial role in the jet evolution as well.

astro-ph.HE↗

arXiv2020

The different flavors of extragalactic jets: the role of relativistic flow deceleration

We perform three-dimensional numerical simulations of relativistic (with a Lorentz factor of 10), non magnetized jets propagating in a uniform density environment, in order to study the effect of the entrainment and the consequent deceleration. Our simulations investigate the jet propagation inside the galaxy core, where, most likely, the deceleration occurs more efficiently. We compare cases with different density and pressure ratios with respect to the ambient medium finding that low density jets are efficiently decelerated and reach a quasi steady state in which, over a length of 600 jet radii, slow down from highly to sub-relativistic velocities. At the opposite, denser jets keep highly relativistic velocity over the same length. We discuss these results in relation to the Faranoff Riley (FR) radio-sources classification. We infer that lower density jets can give rise to FR 0 and FR I radio-sources, while higher density jets may be connected to FR II radio-sources.

astro-ph.HE↗

arXiv2019

Making Faranoff-Riley I radio sources II. The effects of jet magnetization

Radio sources of low power are the most common in the universe. Their jets typically move at nonrelativistic velocity and show plume-like morphologies that in many instances appear distorted and bent. We investigate the role of magnetic field on the propagation and evolution of low-power jets and the connection between the field intensity and the resulting morphology. The problem is addressed by means of three-dimensional magnetohydrodynamic (MHD) simulations. We consider supersonic jets that propagate in a stratified medium. The ambient temperature increases with distance from the jet origin maintaining constant pressure. Jets with low magnetization show an enhanced collimation at small distances with respect to hydrodynamic (HD) cases studied in a previous paper. These jets eventually evolve in a way similar to the HD cases. Jets with higher magnetization are affected by strong nonaxisymmetric modes that lead to the sudden jet energy release. From there on, distorted plumes of jet material move at subsonic velocities. This transition is associated with the formation of structures reminiscent of the `warm spots' observed in wide-angle-tail (WAT) sources.

astro-ph.HE↗

arXiv2017

3D Relativistic MHD numerical simulations of X-shaped radio sources

A significant fraction of extended radio sources presents a peculiar X-shaped radio morphology: in addition to the classical double lobed structure, radio emission is also observed along a second axis of simmetry in the form of diffuse wings or tails. In a previous investigation we showed the existence of a connection between the radio morphology and the properties of the host galaxies. Motivated by this connection we performed two-dimensional numerical simulations showing that X-shaped radio sources may naturally form as a jet propagates along the major axis a highly elliptical density distribution, because of the fast expansion of the cocoon along the minor axis of the distribution. We intend to extend our analysis by performing three-dimensional numerical simulations and investigating the role of different parameters is determining the formation of the X-shaped morphology. The problem is addressed by numerical means, carrying out three-dimensional relativistic magnetohydrodynamic simulations of bidirectional jets propagating in a triaxial density distribution. We show that only jets with power $\lesssim 10^{44}$ erg s$^{-1}$ can give origin to an X-shaped morphology and that a misalignment of $30^o$ between the jet axis and the major axis of the density distribution is still favourable to the formation of this kind of morphology. In addition we compute synthetic radio emission maps and polarization maps. In our scenario for the formation of X-shaped radio sources only low power FRII can give origin to such kind of morphology. Our synthetic emission maps show that the different observed morphologies of X-shaped sources can be the result of similar structures viewed under different perspectives.

astro-ph.GA↗

arXiv2016

Making Fanaroff-Riley I radio sources. Numerical Hydrodynamic 3D Simulations of Low Power Jets

Extragalactic radio sources have been classified into two classes, Fanaroff-Riley I and II, which differ in morphology and radio power. Strongly emitting sources belong to the edge-brightened FR II class, and weakly emitting sources to the edge-darkened FR I class. The origin of this dichotomy is not yet fully understood. Numerical simulations are successful in generating FR II morphologies, but they fail to reproduce the diffuse structure of FR Is. By means of hydro-dynamical 3D simulations of supersonic jets, we investigate how the displayed morphologies depend on the jet parameters. Bow shocks and Mach disks at the jet head, which are probably responsible for the hot spots in the FR II sources, disappear for a jet kinetic power L_kin < 10^43 erg/s. This threshold compares favorably with the luminosity at which the FR I/FR II transition is observed. The problem is addressed by numerical means carrying out 3D HD simulations of supersonic jets that propagate in a non-homogeneous medium with the ambient temperature that increases with distance from the jet origin, which maintains constant pressure. The jet energy in the lower power sources, instead of being deposited at the terminal shock, is gradually dissipated by the turbulence. The jets spread out while propagating, and they smoothly decelerate while mixing with the ambient medium and produce the plumes characteristic of FR I objects. Three-dimensionality is an essential ingredient to explore the FR I evolution because the properties of turbulence in two and three dimensions are very different, since there is no energy cascade to small scales in two dimensions, and two-dimensional simulations with the same parameters lead to FRII-like behavior.

astro-ph.HE↗

arXiv2015

Astrophysical fluid simulations of thermally ideal gases with non-constant adiabatic index: numerical implementation

An Equation of State (\textit{EoS}) closes the set of fluid equations. Although an ideal EoS with a constant \textit{adiabatic index} $Γ$ is the preferred choice due to its simplistic implementation, many astrophysical fluid simulations may benefit from a more sophisticated treatment that can account for diverse chemical processes. Here, we first review the basic thermodynamic principles of a gas mixture in terms of its thermal and caloric EoS by including effects like ionization, dissociation as well as temperature dependent degrees of freedom such as molecular vibrations and rotations. The formulation is revisited in the context of plasmas that are either in equilibrium conditions (local thermodynamic- or collisional excitation- equilibria) or described by non-equilibrium chemistry coupled to optically thin radiative cooling. We then present a numerical implementation of thermally ideal gases obeying a more general caloric EoS with non-constant adiabatic index in Godunov-type numerical schemes.We discuss the necessary modifications to the Riemann solver and to the conversion between total energy and pressure (or vice-versa) routinely invoked in Godunov-type schemes. We then present two different approaches for computing the EoS.The first one employs root-finder methods and it is best suited for EoS in analytical form. The second one leans on lookup table and interpolation and results in a more computationally efficient approach although care must be taken to ensure thermodynamic consistency. A number of selected benchmarks demonstrate that the employment of a non-ideal EoS can lead to important differences in the solution when the temperature range is $500-10^4$ K where dissociation and ionization occur. The implementation of selected EoS introduces additional computational costs although using lookup table methods can significantly reduce the overhead by a factor $3\sim 4$.

astro-ph.IM↗

arXiv2013

Young stellar object jet models: From theory to synthetic observations

Astronomical observations, analytical solutions and numerical simulations have provided the building blocks to formulate the current theory of young stellar object jets. Although each approach has made great progress independently, it is only during the last decade that significant efforts are being made to bring the separate pieces together. Building on previous work that combined analytical solutions and numerical simulations, we apply a sophisticated cooling function to incorporate optically thin energy losses in the dynamics. On the one hand, this allows a self-consistent treatment of the jet evolution and on the other, it provides the necessary data to generate synthetic emission maps. Firstly, analytical disk and stellar outflow solutions are properly combined to initialize numerical two-component jet models inside the computational box. Secondly, magneto-hydrodynamical simulations are performed in 2.5D, following properly the ionization and recombination of a maximum of $29$ ions. Finally, the outputs are post-processed to produce artificial observational data. The first two-component jet simulations, based on analytical models, that include ionization and optically thin radiation losses demonstrate promising results for modeling specific young stellar object outflows. The generation of synthetic emission maps provides the link to observations, as well as the necessary feedback for the further improvement of the available models.

astro-ph.SR↗

arXiv2013

Large-eddy simulation of hypersonic flows. Selective procedure to activate the sub-grid model only where small scale turbulence is present

A new method for the localization of the regions where small scale turbulent fluctuations are present in hypersonic flows is applied to the large-eddy simulation (LES) of a compressible turbulent jet with an initial Mach number equal to 5. The localization method used is called selective LES and is based on the exploitation of a scalar probe function $f$ which represents the magnitude of the stretching-tilting term of the vorticity equation normalized with the enstrophy (Tordella et al. 2007). For a fully developed turbulent field of fluctuations, statistical analysis shows that the probability that $f$ is larger than 2 is almost zero, and, for any given threshold, it is larger if the flow is under-resolved. By computing the spatial field of $f$ in each instantaneous realization of the simulation it is possible to locate the regions where the magnitude of the normalized vortical stretching-tilting is anomalously high. The sub-grid model is then introduced into the governing equations in such regions only. The results of the selective LES simulation are compared with those of a standard LES, where the sub-grid terms are used in the whole domain, and with those of a standard Euler simulation with the same resolution. The comparison is carried out by assuming as reference field a higher resolution Euler simulation of the same jet. It is shown that the selective LES modifies the dynamic properties of the flow to a lesser extent with respect to the classical LES. In particular, the prediction of the enstrophy, mean velocity and density distributions and of the energy and density spectra are substantially improved.

physics.flu-dyn↗

arXiv2012

Velocity asymmetries in YSO jets: Intrinsic and extrinsic mechanisms

It is a well established fact that some YSO jets (e.g. RW Aur) display different propagation speeds between their blue and red shifted parts, a feature possibly associated with the central engine or the environment in which the jet propagates. In order to understand the origin of asymmetric YSO jet velocities, we investigate the efficiency of two candidate mechanisms, one based on the intrinsic properties of the system and one based on the role of the external medium. In particular, a parallel or anti-parallel configuration between the protostellar magnetosphere and the disk magnetic field is considered and the resulting dynamics are examined both in an ideal and a resistive magneto-hydrodynamical (MHD) regime. Moreover, we explore the effects of a potential difference in the pressure of the environment, as a consequence of the non-uniform density distribution of molecular clouds. Ideal and resistive axisymmetric numerical simulations are carried out for a variety of models, all of which are based on a combination of two analytical solutions, a disk wind and a stellar outflow. We find that jet velocity asymmetries can indeed occur both when multipolar magnetic moments are present in the star-disk system as well as when non-uniform environments are considered. The latter case is an external mechanism that can easily explain the large time scale of the phenomenon, whereas the former one naturally relates it to the YSO intrinsic properties. [abridged]

astro-ph.SR↗

arXiv2009

Time-dependent MHD shocks and line intensity ratios in the HH 30 jet: A focus on cooling function and numerical resolution

The coupling between time-dependent, multidimensional MHD numerical codes and radiative line emission is of utmost importance in the studies of the interplay between dynamical and radiative processes in many astrophysical environments, with particular interest for problems involving radiative shocks. There is a widespread consensus that line emitting knots observed in Herbig-Haro jets can be interpreted as radiative shocks. In this paper we address two different aspects relevant to the time-dependent calculations of the line intensity ratios of forbidden transitions, resulting from the excitation by planar, time-dependent radiative shocks traveling in a stratified medium. The first one concerns the impact of the radiation and ionization processes included in the cooling model, and the second one the effects of the numerical grid resolution. In this paper we apply the AMR methodology to the treatment of radiating shocks and show how this method is able to vastly reduce the integration time. The technique is applied to the knots of the HH 30 jet to obtain the observed line intensity ratios and derive the physical parameters, such as density, temperature and ionization fraction. We consider the impact of two different cooling functions and different grid resolutions on the results. We conclude that the use of different cooling routines has effects on results whose weight depends upon the line ratio considered. Moreover, we find the minimum numerical resolution of the simulation grid behind the shock to achieve convergence in the results. This is crucial for the forthcoming 2D calculations of radiative shocks.

astro-ph.SR↗

arXiv2009

High Resolution 3D Relativistic MHD Simulations of Jets

Relativistic magnetized jets are key elements in Active Galactic Nuclei and in other astrophysical environments. Their structure and evolution involves a complex nonlinear physics that can be approached by numerical studies only. Still, owing to a number of challenging computational aspects, only a few numerical investigations have been undertaken so far. In this paper, we present high-resolution three dimensional numerical simulations of relativistic magnetized jets carrying an initially toroidal magnetic field. The presence of a substantial toroidal component of the field is nowadays commonly invoked and held responsible for the process of jet acceleration and collimation. We find that the typical nose cone structures, commonly observed in axisymmetric two-dimensional simulations, are not produced in the 3D case. Rather, the toroidal field gives rise to strong current driven kink instabilities leading to jet wiggling. However, it appears to be able to maintain an highly relativistic spine along its full length. By comparing low and high resolution simulations, we emphasize the impact of resolution on the jet dynamical properties.

astro-ph.CO↗

arXiv2009

Two-component jet simulations: Combining analytical and numerical approaches

Recent observations as well as theoretical studies of YSO jets suggest the presence of two steady components: a disk wind type outflow needed to explain the observed high mass loss rates and a stellar wind type outflow probably accounting for the observed stellar spin down. In this framework, we construct numerical two-component jet models by properly mixing an analytical disk wind solution with a complementary analytically derived stellar outflow. Their combination is controlled by both spatial and temporal parameters, in order to address different physical conditions and time variable features. We study the temporal evolution and the interaction of the two jet components on both small and large scales. The simulations reach steady state configurations close to the initial solutions. Although time variability is not found to considerably affect the dynamics, flow fluctuations generate condensations, whose large scale structures have a strong resemblance to observed YSO jet knots.

astro-ph.GA↗

arXiv2009

Two-component jet simulations: II. Combining analytical disk and stellar MHD outflow solutions

Theoretical arguments along with observational data of YSO jets suggest the presence of two steady components: a disk wind type outflow needed to explain the observed high mass loss rates and a stellar wind type outflow probably accounting for the observed stellar spin down. Each component's contribution depends on the intrinsic physical properties of the YSO-disk system and its evolutionary stage. The main goal of this paper is to understand some of the basic features of the evolution, interaction and co-existence of the two jet components over a parameter space and when time variability is enforced. Having studied separately the numerical evolution of each type of the complementary disk and stellar analytical wind solutions in Paper I of this series, we proceed here to mix together the two models inside the computational box. The evolution in time is performed with the PLUTO code, investigating the dynamics of the two-component jets, the modifications each solution undergoes and the potential steady state reached.

astro-ph.GA↗

arXiv2008

Active Galactic Nuclei, Radio Jets and Acceleration of UHECRs

We present the general properties of the Active Galactic Nuclei (AGNs) and discuss the origin and structure of jets that are associated to a fraction of these objects. We then we address the problems of particle acceleration at highly relativistic energies and set limits on the luminosity of AGN jets for being origin of UHECRs.

astro-ph↗

arXiv2008

On the linear theory of Kelvin-Helmholtz instabilities of relativistic magnetohydrodynamic planar flows

We investigate the linear stability properties of the plane interface separating two relativistic magnetized flows in relative motion. The two flows are governed by the (special) relativistic equations for a magnetized perfect gas in the infinite conductivity approximation. By adopting the vortex-sheet approximation, the relativistic magnetohydrodynamics equations are linearized around the equilibrium state and the corresponding dispersion relation is derived and discussed. The behavior of the configuration and the regimes of instability are investigated following the effects of four physical parameters, namely: the flow velocity, the relativistic and Alfvénic Mach numbers and the inclination of the wave vector on the plane of the interface. From the numerical solution of the dispersion relation, we find in general two separate regions of instability, associated respectively with the slow and fast magnetosonic modes. Modes parallel to the flow velocity are destabilized only for sufficiently low magnetization. For the latter case, stabilization is attained, additionally, at sufficiently large relativistic velocities between the two flows in relative motion. The relevance of these results to the study of the stability of astrophysical jets is briefly commented.

astro-ph↗

arXiv2008

Simulating radiative astrophysical flows with the PLUTO code: A non-equilibrium, multi-species cooling function

Time-dependent cooling processes are of paramount importance in the evolution of astrophysical gaseous nebulae and, in particular, when radiative shocks are present. The present work introduces a necessary set of tools that can be used to model radiative astrophysical flows in the optically-thin plasma limit. We aim to provide reliable and accurate predictions of emission line ratios and radiative cooling losses in astrophysical simulations of shocked flows. Moreover, we discuss numerical implementation aspects to ease future improvements and implementation in other MHD numerical codes. The most important source of radiative cooling for our plasma conditions comes from the collisionally-excited line radiation. We evolve a chemical network, including 29 ion species, to compute the ionization balance in non-equilibrium conditions. After a series of validations and tests, typical astrophysical setups are simulated in 1D and 2D, employing both the present cooling model and a simplified one. The influence of the cooling model on structure morphologies can become important, especially for emission line diagnostic purposes.

astro-ph↗