arXiv subjects

S. Mordijck

Publications and source records attributed to S. Mordijck.

7 recordsLinked to original sources

arXiv2026

Empirical impact of near-separatrix plasma and neutral transport on the pedestal in the transition between EDA and ELMy H-modes on Alcator C-Mod

The transition between the ELMy H-mode and the EDA H-mode is studied on Alcator C-Mod using an experimental database and predictive pedestal models. High-resolution Thomson scattering measurements are used to compare the pedestal density, $n_{e}^\mathrm{ped}$, and the separatrix density, $n_{e}^\mathrm{sep}$ with main chamber neutral measurements. $n_{e}^\mathrm{ped}$ is sensitive to neutral sources only in the ELMy H-mode regime and not in the EDA H-mode regime. Density fluctuation spectra reveal that quasi-coherent structures become stronger at higher densities and more coherent in the EDA relative to the inter-ELM phases of ELMy H-modes, before weakening again at the highest values of $n_{e}^\mathrm{ped}$. The Saarelma-Connor pedestal density prediction model is validated for ELMy H-modes up to $n_{e}^\mathrm{ped} = 2.0 \times 10^{20}$ m$^{-3}$. An additional transport channel driven by resistive ballooning modes (RBM), $D_\mathrm{RBM}$, scaling directly with $α_{t}$ and inversely with $k_\mathrm{RBM}^{2}\hat{q}_\mathrm{cyl}$ is shown to improve the prediction for EDA H-modes, finding good model agreement up to $n_{e}^\mathrm{ped} = 3.0 \times 10^{20}$ m$^{-3}$. EPED scans in $n_{e}^\mathrm{ped}$ are then performed at three values of $n_{e}^\mathrm{sep}/n_{e}^\mathrm{ped}$. Increasing this ratio moves the peeling-ballooning branch transition to lower $n_{e}^\mathrm{ped}$, increasing $p^\mathrm{ped}$ in the peeling branch and decreasing it in the ballooning branch. Agreement is found for large ELM H-modes. SPARC pedestal density predictions for an ELMy and an EDA/QCE-like H-mode are performed and found consistent with assumptions used in previous EPED modeling. Inclusion of $D_\mathrm{RBM}$ significantly weakens the density gradient near the separatrix, lowering $n_{e}^\mathrm{ped}$ by approximately 20%.

physics.plasm-ph↗

arXiv2026

Non-dimensional confinement scaling in similar negative triangularity plasmas on the DIII-D and TCV tokamaks

Similarity experiments were performed on the DIII-D and TCV tokamaks to explore the scaling of energy confinement in negative triangularity plasmas using non-dimensional variables. Near up-down symmetric plasmas with large top-bottom averaged negative triangularity were created in a lower single null configuration, with the shape of the separatrix being closely matched between the two devices. The normalized energy confinement is found to weakly improve at increasing collisionality and, between the two devices, shows a machine size scaling behavior between Bohm and gyro-Bohm. Engineering scaling on a large DIII-D dataset is in agreement with the non-dimensional experiment.

physics.plasm-ph↗

arXiv2024

Determination of confinement regime boundaries via separatrix parameters on Alcator C-Mod based on a model for interchange-drift-Alfvén turbulence

The separatrix operational space (SepOS) model [Eich \& Manz, \emph{Nuclear Fusion} (2021)] is shown to predict the L-H transition, the L-mode density limit, and the ideal MHD ballooning limit in terms of separatrix parameters for a wide range of Alcator C-Mod plasmas. The model is tested using Thomson scattering measurements across a wide range of operating conditions on C-Mod, spanning $\overline{n}_{e} = 0.3 - 5.5 \times 10^{20}$m$^{-3}$, $B_{t} = 2.5 - 8.0$ T, and $B_{p} = 0.1 - 1.2$ T. An empirical regression for the electron pressure gradient scale length, $λ_{p_{e}}$, against a turbulence control parameter, $α_{t}$, and the poloidal fluid gyroradius, $ρ_{s,p}$, for H-modes is constructed and found to require positive exponents for both regression parameters, indicating turbulence widening of near-SOL widths at high $α_{t}$ and an inverse scaling with $B_{p}$, consistent with results on AUG. The SepOS model is also tested in the unfavorable drift direction and found to apply well to all three boundaries, including the L-H transition as long as a correction to the Reynolds energy transfer term, $α_\mathrm{RS} < 1$ is applied. I-modes typically exist in the unfavorable drift direction for values of $α_{t} \lesssim 0.35$. Finally, an experiment studying the transition between the type-I ELMy and EDA H-mode is analyzed using the same framework. It is found that a recently identified boundary at $α_{t} = 0.55$ excludes most EDA H-modes but that the balance of wavenumbers responsible for the L-mode density limit, namely $k_\mathrm{EM} = k_\mathrm{RBM}$, may better describe the transition on C-Mod. The ensemble of boundaries validated and explored is then applied to project regime access and limit avoidance for the SPARC primary reference discharge parameters.

physics.plasm-ph↗

arXiv2024

Enhanced pedestal transport driven by edge collisionality on Alcator C-Mod and its role in regulating H-mode pedestal gradients

Experimental measurements of plasma and neutral profiles across the pedestal are used in conjunction with 2D edge modeling to examine pedestal stiffness in Alcator C-Mod H-mode plasmas. Experiments on Alcator C-Mod observed pedestal degradation and loss in confinement below a critical value of net power crossing the separatrix, $P_\mathrm{net} = P_\mathrm{net}^\mathrm{crit} \approx 2.3$ MW. New analysis of ionization and particle flux profiles reveal saturation of the pedestal electron density, $n_{e}^\mathrm{ped}$ despite continuous increases in ionization throughout the pedestal, inversely related to $P_\mathrm{net}$. A limit to the pedestal $\nabla n_{e}$ emerges as the particle flux, $Γ_{D}$ continues to grow, implying increases in the effective particle diffusivity, $D_\mathrm{eff}$. This is well-correlated with the separatrix collisionality, $ν^{*}_\mathrm{sep}$ and a turbulence control parameter, $α_{t}$, implying a possible transition in type of turbulence. The transition is well correlated with the experimentally observed value of $P_\mathrm{net}^\mathrm{crit}$. SOLPS-ITER modeling is performed for select discharges from the power scan, constrained with experimental electron and neutral densities, measured at the outer midplane. The modeling confirms general growth in $D_\mathrm{eff}$, consistent with experimental findings, and additionally suggests even larger growth in $χ_{e}$ at the same $P_\mathrm{net}^\mathrm{crit}$.

physics.plasm-ph↗

arXiv2024

Particle control via cryopumping and its impact on the edge plasma profiles of Alcator C-Mod

At the high $n_{e}$ proposed for high-field fusion reactors, it is uncertain whether ionization, as opposed to plasma transport, will be most influential in determining $n_{e}$ at the pedestal and separatrix. A database of Alcator C-Mod discharges is analyzed to evaluate the impact of source modification via cryopumping. The database contains similarly-shaped H-modes at fixed $I_{p} =$ 0.8 MA and $B_{t} =$ 5.4 T, spanning a large range in $P_\mathrm{net}$ and ionization. Measurements from an edge Thomson Scattering system are combined with those from a midplane-viewing Ly$_α$ camera to evaluate changes to $n_{e}$ and $T_{e}$ in response to changes to ionization rates, $S_\mathrm{ion}$. $n_{e}^\mathrm{sep}$ and $T_{e}^\mathrm{ped}$ are found to be most sensitive to changes to $S_\mathrm{ion}^\mathrm{sep}$, as opposed to $n_{e}^\mathrm{ped}$ and $T_{e}^\mathrm{sep}$. Dimensionless quantities, namely $α_\mathrm{MHD}$ and $ν^{*}$, are found to regulate attainable pedestal values. Select discharges at different values of $P_\mathrm{net}$ and in different pumping configurations are analyzed further using SOLPS-ITER. It is determined that changes to plasma transport coefficients are required to self-consistently model both plasma and neutral edge dynamics. Pumping is found to modify the poloidal distribution of atomic neutral density, $n_{0}$, along the separatrix, increasing $n_{0}$ at the active X-point. Opaqueness to neutrals from high $n_{e}$ in the divertor is found to play a role in mediating neutral penetration lengths and hence, the poloidal distribution of neutrals along the separatrix. Pumped discharges thus require a larger particle diffusion coefficient than that inferred purely from 1D experimental profiles at the outer midplane.

physics.plasm-ph↗

arXiv2021

Experimental Inference of Neutral and Impurity Transport in Alcator C-Mod Using High-Resolution X-Ray and Ultra-Violet Spectra

We present experimental inferences of cross-field impurity transport coefficients for Alcator C-Mod plasmas using a novel forward model for the entire Ca K-alpha spectrum, including satellite lines within the spectral range, to compare to high-resolution X-ray Imaging Crystal Spectroscopy (XICS). These measurements are complemented by Extreme Ultra-Violet (EUV) spectroscopy that constrains transport closer to the edge. Using new atomic data sets for both XICS and EUV analysis has enabled consideration of line ratios across both spectral ranges and has increased the accuracy of inferred transport coefficients. Inclusion of charge exchange between edge thermal neutrals and impurities is shown to be extremely important in C-Mod pedestals. We obtain D atomic neutral densities from experimental D Ly-alpha measurements at the midplane and compare these to SOLPS-ITER simulations, finding good agreement. Bayesian inferences of impurity transport coefficients are presented for L-, EDA H-, and I-mode discharges, making use of the Aurora package for forward modeling and combining our spectroscopic constraints. Experimentally inferred diffusion profiles are found to match turbulent transport models at midradius within uncertainties, using both quasilinear gyro-fluid TGLF SAT-1 and nonlinear ion-scale gyrokinetic CGYRO simulations. Significant discrepancies in convection are observed in some cases, suggesting difficulties in predictions of flat or hollow impurity profiles.

physics.plasm-ph↗

arXiv2021

Modeling of Particle Transport, Neutrals and Radiation in Magnetically-Confined Plasmas with Aurora

We present Aurora, an open-source package for particle transport, neutrals and radiation modeling in magnetic confinement fusion plasmas. Aurora's modern multi-language interface enables simulations of 1.5D impurity transport within high-performance computing frameworks, particularly for the inference of particle transport coefficients. A user-friendly Python library allows simple interaction with atomic rates from the Atomic Data and Atomic Structure database as well as other sources. This enables a range of radiation predictions, both for power balance and spectroscopic analysis. We discuss here the superstaging approximation for complex ions, as a way to group charge states and reduce computational cost, demonstrating its wide applicability within the Aurora forward model and beyond. Aurora also facilitates neutral particle analysis, both from experimental spectroscopic data and other simulation codes. Leveraging Aurora's capabilities to interface SOLPS-ITER results, we demonstrate that charge exchange is unlikely to affect the total radiated power from the ITER core during high performance operation. Finally, we describe the ImpRad module in the OMFIT framework, developed to enable experimental analysis and transport inferences on multiple devices using Aurora.

physics.plasm-ph↗