arXiv subjects

S. Nic Chormaic

Publications and source records attributed to S. Nic Chormaic.

12 recordsLinked to original sources

arXiv2025

Collective emission of atomic nanorings around an optical nanofiber

We theoretically investigate the collective emission of one and two circular arrays of two-level atoms surrounding an optical nanofiber. We show that the radiation eigenmodes of a single ring selectively couple to specific guided modes of the fiber, according to their symmetry, and study how the physical parameters of the system control their nature. In particular, we identify situations in which the emission toward radiation modes is highly suppressed with respect to fiber-guided modes while the lifetime of the atomic excitation is enhanced. We further address the case of two identical nanorings positioned at a distance from each other along the nanofiber. By contrast to free-space configurations, the rings can exchange excitations even at large separation through nanofiber guided modes resulting in enhanced sub- and super-radiance with respect to the single-ring case. Our findings suggest that the ring configuration is promising for the implementation of efficient and versatile light-matter nanofiber-based interfaces and the achievement of waveguide quantum electrodynamics.

quant-ph↗

arXiv2022

Interaction of two Rydberg atoms in the vicinity of an optical nanofibre

We consider two rubidium atoms, prepared in the same S or P Rydberg states near an optical nanofibre. We determine the van der Waals interaction between them and identify novel features, including the reshaping of the interaction anisotropy and the formation of an interaction potential well near the nanofibre for P states. We attribute these phenomena to the breaking of the rotation symmetry around the interatomic axis due to the presence of the fibre. Our work constitutes an important step in the assessment of Rydberg atom-nanofibre quantum interfaces and devices.

quant-ph↗

arXiv2020

Spontaneous emission and energy shifts of a Rydberg rubidium atom close to an optical nanofiber

In this paper, we report on numerical calculations of the spontaneous emission rates and Lamb shifts of a $^{87}\text{Rb}$ atom in a Rydberg-excited state $\left(n\leq30\right)$ located close to a silica optical nanofiber. We investigate how these quantities depend on the fiber's radius, the distance of the atom to the fiber, the direction of the atomic angular momentum polarization as well as the different atomic quantum numbers. We also study the contribution of quadrupolar transitions, which may be substantial for highly polarizable Rydberg states. Our calculations are performed in the macroscopic quantum electrodynamics formalism, based on the dyadic Green's function method. This allows us to take dispersive and absorptive characteristics of silica into account; this is of major importance since Rydberg atoms emit along many different transitions whose frequencies cover a wide range of the electromagnetic spectrum. Our work is an important initial step towards building a Rydberg atom-nanofiber interface for quantum optics and quantum information purposes.

quant-ph↗

arXiv2018

Probing decoherence in plasmonic waveguides in the quantum regime

We experimentally investigate the decoherence of single surface plasmon polaritons in metal stripe waveguides. In our study we use a Mach-Zehnder configuration previously considered for measuring decoherence in atomic, electronic and photonic systems. By placing waveguides of different length in one arm we are able to measure the amplitude damping time T_1 = 1.90 +/- 0.01 x 10^-14 s, pure phase damping time T_2^* = 11.19 +/- 4.89 x 10^-14 s and total phase damping time T_2 = 2.83 +/- 0.32 x 10^-14 s. We find that decoherence is mainly due to amplitude damping and thus loss arising from inelastic electron and photon scattering plays the most important role in the decoherence of plasmonic waveguides in the quantum regime. However, pure phase damping is not completely negligible. The results will be useful in the design of plasmonic waveguide systems for carrying out phase-sensitive quantum applications, such as quantum sensing. The probing techniques developed may also be applied to other plasmonic nanostructures, such as those used as nanoantennas, as unit cells in metamaterials and as nanotraps for cold atoms.

quant-ph↗

arXiv2014

Optical Micro- and Nanofiber Pulling Rig

We review the method of producing adiabatic optical micro- and nanofibers using a hydrogen/oxygen flame brushing technique. The flame is scanned along the fiber, which is being simultaneously stretched by two translation stages. The tapered fiber fabrication is reproducible and yields highly adiabatic tapers with either exponential or linear profiles. Details regarding the setup of the flame brushing rig and the various parameters used are presented. Information available from the literature is compiled and further details that are necessary to have a functioning pulling rig are included. This should enable the reader to fabricate various taper profiles, while achieving adiabatic transmission of ~ 99% for fundamental mode propagation. Using this rig, transmissions ranging from 85-95% for higher order modes in an optical nanofiber have been obtained.

physics.optics↗

arXiv2013

Measurements on release-recapture of cold Rb-85 atoms using an optical nanofibre in a magneto-optical trap

We have performed release-recapture temperature measurements of laser-cooled Rb-85 atoms using an optical nanofibre (ONF) in a magneto-optical trap (MOT). The effects of changing the cooling laser light-shift parameter on the temperature of the cold atoms and spring constant of the trap are studied. By varying the cold atom number density near the ONF, the onset of the multiple scattering regime is observed without the need for an estimation of the atom cloud size. Moreover, this sensitive ONF assisted release-recapture technique is easily able to detect any optical misalignment of the cooling laser beams in the MOT.

physics.atom-ph↗

arXiv2009

Tapered optical fibers as tools for probing magneto-optical trap characteristics

We present a novel technique for measuring the characteristics of a magneto-optical trap for cold atoms by monitoring the spontaneous emission from trapped atoms coupled into the guided mode of a tapered optical nanofiber. We show that the nanofiber is highly sensitive to very small numbers of atoms close to its surface. The size and shape of the MOT, determined by translating the cold atom cloud across the tapered fiber, is in excellent agreement with measurements obtained using the conventional method of fluorescence imaging using a CCD camera. The coupling of atomic fluorescence into the tapered fiber also allows us to monitor the loading and lifetime of the trap. The results are compared to those achieved by focusing the MOT fluorescence onto a photodiode and it was seen that the tapered fiber gives slightly longer loading and lifetime measurements due to the sensitivity of the fiber, even when very few atoms are present.

quant-ph↗

arXiv2009

Trapping of a microsphere pendulum resonator in an optical potential

We propose a method to spatially confine or corral the movements of a micropendulum via the optical forces produced by two simultaneously excited optical modes of a photonic molecule comprising two microspherical cavities. We discuss how the cavity enhanced optical force generated in the photonic molecule can create an optomechanical potential of about 10 eV deep and 30 pm wide, which can be used to trap the pendulum at any given equilibrium position by a simple choice of laser frequencies. This result presents opportunities for very precise all-optical self-alignment of microsystems.

physics.optics↗

arXiv2007

Optical bistability in Er-Yb co-doped phosphate glass microspheres at room temperature

We experimentally demonstrate optical bistability in Er3+-Yb3+ phosphate glass microspheres at 295 K. Bistability is associated with both Er3+ fluorescence and lasing behavior, and chromatic switching. The chromatic switching results from an intrinsic mechanism exploiting the thermal coupling of closely-spaced energy levels, and occurs simultaneously with the intensity switching. A contrast ratio of 3.2 has been obtained for chromatic switching, and the intensity switching shows ratios of 2.4 for 550 nm and, 1.8 for the 660 nm fluorescence emissions, and 11 for the IR lasing at 1.5 um. Concurrent with these observations, we investigate a temperature dependent absorption of pump power which exhibits bistable behavior. The influences of the host matrix on lasing and fluorescence mechanisms are highlighted.

physics.optics↗

arXiv2007

A heat-and-pull rig for fiber taper fabrication

We describe a reproducible method of fabricating adiabatic tapers with 3-4 micron diameter. The method is based on a heat-and-pull rig, whereby a CO2 laser is continuously scanned across a length of fiber that is being pulled synchronously. Our system relies on a CO2 mirror mounted on a geared stepper motor in order to scan the laser beam across the taper region. We show that this system offers a reliable alternative to more traditional rigs incorporating galvanometer scanners. We have routinely obtained transmission losses between 0.1 and 0.3 dB indicating the satisfactory production of adiabatic tapers. The operation of the rig is described in detail and an analysis on the produced tapers is provided. The flexibility of the rig is demonstrated by fabricating prolate dielectric microresonators using a microtapering technique. Such a rig is of interest to a range of fields that require tapered fiber fabrication such as microcavity-taper coupling, atom guiding along a tapered fiber, optical fiber sensing and the fabrication of fused biconical tapered couplers.

physics.ins-det↗

arXiv2006

Controlled Creation of Spatial Superposition States for Single Atoms

We present a method for the controlled and robust generation of spatial superposition states of single atoms in micro-traps. Using a counter-intuitive positioning sequence for the individual potentials and appropriately chosen trapping frequencies, we show that it is possible to selectively create two different orthogonal superposition states, which can in turn be used for quantum information purposes.

quant-ph↗

arXiv1998

A magnetic guide for cold atoms

We propose a novel method for guiding cold, neutral atoms using static magnetic fields. A theoretical study of the magnetic field produced by a tube consisting of two identical, interwound solenoids carrying equal but opposite currents is presented. This field is almost zero throughout the centre of the tube, but it increases with exponential rapidity as one approaches the walls formed by the current carrying wires. Hence, cold atoms passing through the tube may be reflected by magnetic mirror effects near the walls. Applying this technique to a free-falling cloud of magneto-optically cooled caesium atoms we hope to construct atomic guides to facilitate the manipulation of cold atomic beams.

physics.atom-ph↗