arXiv subjects

S. Oslowski

Publications and source records attributed to S. Oslowski.

At least 19 recordsLinked to original sources

arXiv2023

Single-pulse studies of three millisecond pulsars

Single-pulse studies are important to understand the pulsar emission mechanism and the noise floor in precision timing. We study total intensity and polarimetry properties of three bright millisecond pulsars - PSRs J1022+1001, J1713+0747, and B1855+09 - that have detectable single pulses at multiple frequencies. We report for the first time the detection of single pulses from PSRs J1022+1001 and J1713+0747 at 4.5 GHz. In addition, for those two pulsars the fraction of linear polarization in the average profile is significantly reduced at 4.5 GHz, compared to 1.38 GHz, which could support the expected deviation from a dipolar field closer to the pulsar surface. There is a hint of orthogonal modes in the single pulses of PSR J1713+0747. More sensitive multi-frequency observations may be useful to confirm these findings. The jitter noise contributions at 1.38 GHz, scaled to one hour, for PSRs J1022+1001, J1713+0747 and B1855+09 are ~135 ns, ~45 ns, and ~60 ns respectively and are consistent with previous studies. We also show that selective bright-pulse timing of PSR J1022+1001 yields improved root-mean-square residuals of ~22 $μ$s, which is a factor of ~3 better than timing using single pulses alone.

astro-ph.HE↗

arXiv2021

Pulsar Timing Array Experiments

Pulsar timing is a technique that uses the highly stable spin periods of neutron stars to investigate a wide range of topics in physics and astrophysics. Pulsar timing arrays (PTAs) use sets of extremely well-timed pulsars as a Galaxy-scale detector with arms extending between Earth and each pulsar in the array. These challenging experiments look for correlated deviations in the pulsars' timing that are caused by low-frequency gravitational waves (GWs) traversing our Galaxy. PTAs are particularly sensitive to GWs at nanohertz frequencies, which makes them complementary to other space- and ground-based detectors. In this chapter, we will describe the methodology behind pulsar timing; provide an overview of the potential uses of PTAs; and summarise where current PTA-based detection efforts stand. Most predictions expect PTAs to successfully detect a cosmological background of GWs emitted by supermassive black-hole binaries and also potentially detect continuous-wave emission from binary supermassive black holes, within the next several years.

astro-ph.IM↗

arXiv2021

The Relativistic Binary Programme on MeerKAT: Science objectives and first results

We describe the ongoing Relativistic Binary programme (RelBin), a part of the MeerTime large survey project with the MeerKAT radio telescope. RelBin is primarily focused on observations of relativistic effects in binary pulsars to enable measurements of neutron star masses and tests of theories of gravity. We selected 25 pulsars as an initial high priority list of targets based on their characteristics and observational history with other telescopes. In this paper, we provide an outline of the programme, present polarisation calibrated pulse profiles for all selected pulsars as a reference catalogue along with updated dispersion measures. We report Faraday rotation measures for 24 pulsars, twelve of which have been measured for the first time. More than a third of our selected pulsars show a flat position angle swing confirming earlier observations. We demonstrate the ability of the Rotating Vector Model (RVM), fitted here to seven binary pulsars, including the Double Pulsar (PSR J0737$-$3039A), to obtain information about the orbital inclination angle. We present a high time resolution light curve of the eclipse of PSR J0737$-$3039A by the companion's magnetosphere, a high-phase resolution position angle swing for PSR J1141$-$6545, an improved detection of the Shapiro delay of PSR J1811$-$2405, and pulse scattering measurements for PSRs J1227$-$6208, J1757$-$1854, and J1811$-$1736. Finally, we demonstrate that timing observations with MeerKAT improve on existing data sets by a factor of, typically, 2-3, sometimes by an order of magnitude.

astro-ph.HE↗

arXiv2021

Measurements of pulse jitter and single-pulse variability in millisecond pulsars using MeerKAT

Using the state-of-the-art SKA precursor, the MeerKAT radio telescope, we explore the limits to precision pulsar timing of millisecond pulsars achievable due to pulse stochasticity (jitter). We report new jitter measurements in 15 of the 29 pulsars in our sample and find that the levels of jitter can vary dramatically between them. For some, like the 2.2~ms pulsar PSR J2241--5236, we measure an implied jitter of just $\sim$ 4~ns/hr, while others like the 3.9~ms PSR J0636--3044 are limited to $\sim$ 100 ns/hr. While it is well known that jitter plays a central role to limiting the precision measurements of arrival times for high signal-to-noise ratio observations, its role in the measurement of dispersion measure (DM) has not been reported, particularly in broad-band observations. Using the exceptional sensitivity of MeerKAT, we explored this on the bright millisecond pulsar PSR J0437--4715 by exploring the DM of literally every pulse. We found that the derived single pulse DMs vary by typically 0.0085 cm$^{-3}$ pc from the mean, and that the best DM estimate is limited by the differential pulse jitter across the band. We postulate that all millisecond pulsars will have their own limit on DM precision which can only be overcome with longer integrations. Using high-time resolution filterbank data of 9 $μ$s, we also present a statistical analysis of single pulse phenomenology. Finally, we discuss optimization strategies for the MeerKAT pulsar timing program and its role in the context of the International Pulsar Timing Array (IPTA).

astro-ph.HE↗

arXiv2020

A census of baryons in the Universe from localized fast radio bursts

More than three quarters of the baryonic content of the Universe resides in a highly diffuse state that is difficult to observe, with only a small fraction directly observed in galaxies and galaxy clusters. Censuses of the nearby Universe have used absorption line spectroscopy to observe these invisible baryons, but these measurements rely on large and uncertain corrections and are insensitive to the majority of the volume, and likely mass. Specifically, quasar spectroscopy is sensitive either to only the very trace amounts of Hydrogen that exists in the atomic state, or highly ionized and enriched gas in denser regions near galaxies. Sunyaev-Zel'dovich analyses provide evidence of some of the gas in filamentary structures and studies of X-ray emission are most sensitive to gas near galaxy clusters. Here we report the direct measurement of the baryon content of the Universe using the dispersion of a sample of localized fast radio bursts (FRBs), thus utilizing an effect that measures the electron column density along each sight line and accounts for every ionised baryon. We augment the sample of published arcsecond-localized FRBs with a further four new localizations to host galaxies which have measured redshifts of 0.291, 0.118, 0.378 and 0.522, completing a sample sufficiently large to account for dispersion variations along the line of sight and in the host galaxy environment to derive a cosmic baryon density of $Ω_{b} = 0.051_{-0.025}^{+0.021} \, h_{70}^{-1}$ (95% confidence). This independent measurement is consistent with Cosmic Microwave Background and Big Bang Nucleosynthesis values.

astro-ph.CO↗

arXiv2020

Which bright fast radio bursts repeat?

A handful of fast radio bursts (FRBs) are now known to repeat. However, the question remains --- do they all? We report on an extensive observational campaign with the Australian Square Kilometre Array Pathfinder (ASKAP), Parkes, and Robert C. Byrd Green Bank Telescope, searching for repeat bursts from FRBs detected by the Commensal Real-time ASKAP Fast Transients survey. In 383.2 hr of follow-up observations covering 27 FRBs initially detected as single bursts, only two repeat bursts from a single FRB, FRB 171019, were detected, which have been previously reported by Kumar et al. We use simulations of repeating FRBs that allow for clustering in burst arrival times to calculate new estimates for the repetition rate of FRB 171019, finding only slight evidence for incompatibility with the properties of FRB 121102. Our lack of repeat bursts from the remaining FRBs set limits on the model of all bursts being attributable to repeating FRBs. Assuming a reasonable range of repetition behaviour, at most 60% (90% C.L.) of these FRBs having an intrinsic burst distribution similar to FRB~121102. This result is shown to be robust against different assumptions on the nature of repeating FRB behaviour, and indicates that if indeed all FRBs repeat, the majority must do so very rarely.

astro-ph.HE↗

arXiv2019

An ultra-wide bandwidth (704 to 4032 MHz) receiver for the Parkes radio telescope

We describe an ultra-wide-bandwidth, low-frequency receiver ("UWL") recently installed on the Parkes radio telescope. The receiver system provides continuous frequency coverage from 704 to 4032 MHz. For much of the band (~60%) the system temperature is approximately 22K and the receiver system remains in a linear regime even in the presence of strong mobile phone transmissions. We discuss the scientific and technical aspects of the new receiver including its astronomical objectives, as well as the feed, receiver, digitiser and signal-processor design. We describe the pipeline routines that form the archive-ready data products and how those data files can be accessed from the archives. The system performance is quantified including the system noise and linearity, beam shape, antenna efficiency, polarisation calibration and timing stability.

astro-ph.IM↗

arXiv2019

A pulsar-based timescale from the International Pulsar Timing Array

We have constructed a new timescale, TT(IPTA16), based on observations of radio pulsars presented in the first data release from the International Pulsar Timing Array (IPTA). We used two analysis techniques with independent estimates of the noise models for the pulsar observations and different algorithms for obtaining the pulsar timescale. The two analyses agree within the estimated uncertainties and both agree with TT(BIPM17), a post-corrected timescale produced by the Bureau International des Poids et Mesures (BIPM). We show that both methods could detect significant errors in TT(BIPM17) if they were present. We estimate the stability of the atomic clocks from which TT(BIPM17) is derived using observations of four rubidium fountain clocks at the US Naval Observatory. Comparing the power spectrum of TT(IPTA16) with that of these fountain clocks suggests that pulsar-based timescales are unlikely to contribute to the stability of the best timescales over the next decade, but they will remain a valuable independent check on atomic timescales. We also find that the stability of the pulsar-based timescale is likely to be limited by our knowledge of solar-system dynamics, and that errors in TT(BIPM17) will not be a limiting factor for the primary goal of the IPTA, which is to search for the signatures of nano-Hertz gravitational waves.

astro-ph.IM↗

arXiv2019

The International Pulsar Timing Array: Second data release

In this paper, we describe the International Pulsar Timing Array second data release, which includes recent pulsar timing data obtained by three regional consortia: the European Pulsar Timing Array, the North American Nanohertz Observatory for Gravitational Waves, and the Parkes Pulsar Timing Array. We analyse and where possible combine high-precision timing data for 65 millisecond pulsars which are regularly observed by these groups. A basic noise analysis, including the processes which are both correlated and uncorrelated in time, provides noise models and timing ephemerides for the pulsars. We find that the timing precisions of pulsars are generally improved compared to the previous data release, mainly due to the addition of new data in the combination. The main purpose of this work is to create the most up-to-date IPTA data release. These data are publicly available for searches for low-frequency gravitational waves and other pulsar science.

astro-ph.HE↗

arXiv2019

Timing of young radio pulsars I: Timing noise, periodic modulation and proper motion

The smooth spin-down of young pulsars is perturbed by two non-deterministic phenomenon, glitches and timing noise. Although the timing noise provides insights into nuclear and plasma physics at extreme densities, it acts as a barrier to high-precision pulsar timing experiments. An improved methodology based on Bayesian inference is developed to simultaneously model the stochastic and deterministic parameters for a sample of 85 high-$\dot{E}$ radio pulsars observed for $\sim$ 10 years with the 64-m Parkes radio telescope. Timing noise is known to be a red process and we develop a parametrization based on the red-noise amplitude ($A_{\rm red}$) and spectral index ($β$). We measure the median $A_{\rm red}$ to be $-10.4^{+1.8}_{-1.7}$ yr$^{3/2}$ and $β$ to be $-5.2^{+3.0}_{-3.8}$ and show that the strength of timing noise scales proportionally to $ν^{1}|\dotν|^{-0.6\pm0.1}$, where $ν$ is the spin frequency of the pulsar and $\dotν$ its spin-down rate. Finally, we measure significant braking indices for 19 pulsars, proper motions for two pulsars and discuss the presence of periodic modulation in the arrival times of five pulsars.

astro-ph.HE↗

arXiv2019

On the usefulness of existing Solar-wind models for pulsar timing corrections

Dispersive delays due to the Solar wind introduce excess noise in high-precision pulsar timing experiments, and must be removed in order to achieve the accuracy needed to detect, e.g., low-frequency gravitational waves. In current pulsar timing experiments, this delay is usually removed by approximating the electron density distribution in the Solar wind either as spherically symmetric, or with a two-phase model that describes the contributions from both high- and low-speed phases of the Solar wind. However, no dataset has previously been available to test the performance and limitations of these models over extended timescales and with sufficient sensitivity. Here we present the results of such a test with an optimal dataset of observations of pulsar J0034-0534, taken with the German stations of LOFAR. We conclude that the spherical approximation performs systematically better than the two-phase model at almost all angular distances, with a residual root-mean-square (rms) given by the two-phase model being up to 28% larger than the result obtained with the spherical approximation. Nevertheless, the spherical approximation remains insufficiently accurate in modelling the Solar-wind delay (especially within 20 degrees of angular distance from the Sun), as it leaves timing residuals with rms values that reach the equivalent of 0.3 microseconds at 1400 MHz. This is because a spherical model ignores the large daily variations in electron density observed in the Solar wind. In the short term, broadband observations or simultaneous observations at low frequencies are the most promising way forward to correct for Solar-wind induced delay variations.

astro-ph.HE↗

arXiv2019

The 2018 X-ray and Radio Outburst of Magnetar XTE J1810-197

We present the earliest X-ray observations of the 2018 outburst of XTE J1810-197, the first outburst since its 2003 discovery as the prototypical transient and radio-emitting anomalous X-ray pulsar (AXP). The Monitor of All-sky X-ray Image (MAXI) detected XTE J1810-197 immediately after a November 20-26 visibility gap, contemporaneous with its reactivation as a radio pulsar, first observed on December 8. On December 13 the Nuclear Spectroscopic Telescope Array (NUSTAR) detected X-ray emission up to at least 30 keV, with a spectrum well-characterized by a blackbody plus power-law model with temperature kT = 0.74+/-0.02 keV and photon index Gamma = 4.4+/-0.2 or by a two-blackbody model with kT = 0.59+/-0.04 keV and kT = 1.0+/-0.1 keV, both including an additional power-law component to account for emission above 10 keV, with Gamma_h = -0.2+/-1.5 and Gamma_h = 1.5+/-0.5, respectively. The latter index is consistent with hard X-ray flux reported for the non-transient magnetars. In the 2-10 keV bandpass, the absorbed flux is 2E-10 erg/s/cm^2, a factor of 2 greater than the maximum flux extrapolated for the 2003 outburst. The peak of the sinusoidal X-ray pulse lags the radio pulse by approx. 0.13 cycles, consistent with their phase relationship during the 2003 outburst. This suggests a stable geometry in which radio emission originates on magnetic field lines containing currents that heat a spot on the neutron star surface. However, a measured energy-dependent phase shift of the pulsed X-rays suggests that all X-ray emitting regions are not precisely co-aligned.

astro-ph.HE↗

arXiv2019

The Performance and Calibration of the CRAFT Fly's Eye Fast Radio Burst Survey

Since January 2017, the Commensal Real-time ASKAP Fast Transients survey (CRAFT) has been utilising commissioning antennas of the Australian SKA Pathfinder (ASKAP) to survey for fast radio bursts (FRBs) in fly's eye mode. This is the first extensive astronomical survey using phased array feeds (PAFs), and a total of 20 FRBs have been reported. Here we present a calculation of the sensitivity and total exposure of this survey, using the pulsars B1641-45 (J1644-4559) and B0833-45 (J0835-4510, i.e.\ Vela) as calibrators. The design of the survey allows us to benchmark effects due to PAF beamshape, antenna-dependent system noise, radio-frequency interference, and fluctuations during commissioning on timescales from one hour to a year. Observation time, solid-angle, and search efficiency are calculated as a function of FRB fluence threshold. Using this metric, effective survey exposures and sensitivities are calculated as a function of the source counts distribution. The implied FRB rate is significantly lower than the $37$\,sky$^{-1}$\,day$^{-1}$ calculated using nominal exposures and sensitivities for this same sample by \citet{craft_nature}. At the Euclidean power-law index of $-1.5$, the rate is $10.7_{-1.8}^{+2.7}\,{\rm (sys)} \, \pm \, 3\,{\rm (stat)}$\,sky$^{-1}$\,day$^{-1}$ above a threshold of $57\pm6\,{\rm (sys)}$\,Jy\,ms, while for the best-fit index for this sample of $-2.1$, it is $16.6_{-1.5}^{+1.9} \,{\rm (sys)}\, \pm 4.7\,{\rm (stat)}$\,sky$^{-1}$\,day$^{-1}$ above a threshold of $41.6\pm1.5\,{\rm (sys)}$\,Jy\,ms. This strongly suggests that these calculations be performed for other FRB-hunting experiments, allowing meaningful comparisons to be made between them.

astro-ph.HE↗

arXiv2018

The UTMOST pulsar timing programme I: overview and first results

We present an overview and the first results from a large-scale pulsar timing programme that is part of the UTMOST project at the refurbished Molonglo Observatory Synthesis Radio Telescope (MOST) near Canberra, Australia. We currently observe more than 400 mainly bright southern radio pulsars with up to daily cadences. For 205 (8 in binaries, 4 millisecond pulsars) we publish updated timing models, together with their flux densities, flux density variability, and pulse widths at 843 MHz, derived from observations spanning between 1.4 and 3 yr. In comparison with the ATNF pulsar catalogue, we improve the precision of the rotational and astrometric parameters for 123 pulsars, for 47 by at least an order of magnitude. The time spans between our measurements and those in the literature are up to 48 yr, which allows us to investigate their long-term spin-down history and to estimate proper motions for 60 pulsars, of which 24 are newly determined and most are major improvements. The results are consistent with interferometric measurements from the literature. A model with two Gaussian components centred at 139 and $463~\text{km} \: \text{s}^{-1}$ fits the transverse velocity distribution best. The pulse duty cycle distributions at 50 and 10 per cent maximum are best described by log-normal distributions with medians of 2.3 and 4.4 per cent, respectively. We discuss two pulsars that exhibit spin-down rate changes and drifting subpulses. Finally, we describe the autonomous observing system and the dynamic scheduler that has increased the observing efficiency by a factor of 2-3 in comparison with static scheduling.

astro-ph.HE↗

arXiv2018

Improving timing sensitivity in the microhertz frequency regime: limits from PSR J1713$+$0747 on gravitational waves produced by super-massive black-hole binaries

We search for continuous gravitational waves (CGWs) produced by individual super-massive black-hole binaries (SMBHBs) in circular orbits using high-cadence timing observations of PSR J1713$+$0747. We observe this millisecond pulsar using the telescopes in the European Pulsar Timing Array (EPTA) with an average cadence of approximately 1.6 days over the period between April 2011 and July 2015, including an approximately daily average between February 2013 and April 2014. The high-cadence observations are used to improve the pulsar timing sensitivity across the GW frequency range of $0.008-5$ $μ$Hz. We use two algorithms in the analysis, including a spectral fitting method and a Bayesian approach. For an independent comparison, we also use a previously published Bayesian algorithm. We find that the Bayesian approaches provide optimal results and the timing observations of the pulsar place a 95 per cent upper limit on the sky-averaged strain amplitude of CGWs to be $\lesssim3.5\times10^{-13}$ at a reference frequency of 1 $μ$Hz. We also find a 95 per cent upper limit on the sky-averaged strain amplitude of low-frequency CGWs to be $\lesssim1.4\times10^{-14}$ at a reference frequency of 20~nHz.

astro-ph.HE↗

arXiv2018

MeerTime - the MeerKAT Key Science Program on Pulsar Timing

The MeerKAT telescope represents an outstanding opportunity for radio pulsar timing science with its unique combination of a large collecting area and aperture efficiency (effective area $\sim$7500 m$^2$), system temperature ($T<20$K), high slew speeds (1-2 deg/s), large bandwidths (770 MHz at 20cm wavelengths), southern hemisphere location (latitude $\sim -30^\circ$) and ability to form up to four sub-arrays. The MeerTime project is a five-year program on the MeerKAT array by an international consortium that will regularly time over 1000 radio pulsars to perform tests of relativistic gravity, search for the gravitational wave signature induced by supermassive black hole binaries in the timing residuals of millisecond pulsars, explore the interiors of neutron stars through a pulsar glitch monitoring programme, explore the origin and evolution of binary pulsars, monitor the swarms of pulsars that inhabit globular clusters and monitor radio magnetars. In addition to these primary programmes, over 1000 pulsars will have their arrival times monitored and the data made immediately public. The MeerTime pulsar backend comprises two server-class machines each of which possess four Graphics Processing Units. Up to four pulsars can be coherently dedispersed simultaneously up to dispersion measures of over 1000 pc cm$^{-3}$. All data will be provided in psrfits format. The MeerTime backend will be capable of producing coherently dedispersed filterbank data for timing multiple pulsars in the cores of globular clusters that is useful for pulsar searches of tied array beams. All MeerTime data will ultimately be made available for public use, and any published results will include the arrival times and profiles used in the results.

astro-ph.IM↗

arXiv2017

X-rays from the mode-switching PSR B0943+10

New simultaneous X-ray and radio observations of the archetypal mode-switching pulsar PSR B0943+10 have been carried out with XMM-Newton and the LOFAR, LWA and Arecibo radio telescopes in November 2014. They allowed us to better constrain the X-ray spectral and variability properties of this pulsar and to detect, for the first time, the X-ray pulsations also during the X-ray-fainter mode. The combined timing and spectral analysis indicates that unpulsed non-thermal emission, likely of magnetospheric origin, and pulsed thermal emission from a small polar cap are present during both radio modes and vary in a correlated way.

astro-ph.HE↗

arXiv2017

Follow up of GW170817 and its electromagnetic counterpart by Australian-led observing programs

The discovery of the first electromagnetic counterpart to a gravitational wave signal has generated follow-up observations by over 50 facilities world-wide, ushering in the new era of multi-messenger astronomy. In this paper, we present follow-up observations of the gravitational wave event GW170817 and its electromagnetic counterpart SSS17a/DLT17ck (IAU label AT2017gfo) by 14 Australian telescopes and partner observatories as part of Australian-based and Australian-led research programs. We report early- to late-time multi-wavelength observations, including optical imaging and spectroscopy, mid-infrared imaging, radio imaging, and searches for fast radio bursts. Our optical spectra reveal that the transient source afterglow cooled from approximately 6400K to 2100K over a 7-day period and produced no significant optical emission lines. The spectral profiles, cooling rate, and photometric light curves are consistent with the expected outburst and subsequent processes of a binary neutron star merger. Star formation in the host galaxy probably ceased at least a Gyr ago, although there is evidence for a galaxy merger. Binary pulsars with short (100 Myr) decay times are therefore unlikely progenitors, but pulsars like PSR B1534+12 with its 2.7 Gyr coalescence time could produce such a merger. The displacement (about 2.2 kpc) of the binary star system from the centre of the main galaxy is not unusual for stars in the host galaxy or stars originating in the merging galaxy, and therefore any constraints on the kick velocity imparted to the progenitor are poor.

astro-ph.HE↗