arXiv subjects

S. Ostanin

Publications and source records attributed to S. Ostanin.

At least 19 recordsLinked to original sources

arXiv2025

Re-entrant superconductivity at an oxide heterointerface

A magnetic field typically suppresses superconductivity by either breaking Cooper pairs via the Zeeman effect or inducing vortex formation. However, under certain circumstances, a magnetic field can stabilize superconductivity instead. This seemingly counterintuitive phenomenon is associated with magnetic interactions and has been extensively studied in three-dimensional materials. By contrast, this phenomenon, hinting at unconventional superconductivity, remains largely unexplored in two-dimensional systems, with moir\'e-patterned graphene being the only known example. Here, we report the observation of re-entrant superconductivity (RSC) at the epitaxial (110)-oriented LaTiO3-KTaO3 interface. This phenomenon occurs across a wide range of charge carrier densities, which, unlike in three-dimensional materials, can be tuned in-situ via electrostatic gating. We attribute the re-entrant superconductivity to the interplay between a strong spin-orbit coupling and a magnetic-field driven modification of the Fermi surface. Our findings offer new insights into re-entrant superconductivity and establish a robust platform for exploring novel effects in two-dimensional superconductors.

cond-mat.supr-con↗

arXiv2024

Fragile altermagnetism and orbital disorder in Mott insulator LaTiO$_3$

Based on ab initio calculations, we demonstrate that a Mott insulator LaTiO$_3$ (LTO), not inspected previously as an altermagnetic material, shows the characteristic features of altermagnets, i.e., (i) fully compensated antiferromagnetism and (ii) $\mathbf{k}$-dependent spin-split electron bands in the absence of spin-orbit coupling. The altermagnetic ground state of LTO is protected by the crystal symmetry and specifically ordered $d$-orbitals of Ti ions with the orbital momentum $l=2.$ The altermagnetism occurs when sites of Ti pair in the unit cell are occupied by single electrons with $m=-1,s_{z}=+1/2$ and $m=+1,s_{z}=-1/2$ per site, with $m$ and $s_{z}-$ being the $z-$ component of the orbital momentum and spin, respectively. By further simulating orbital disorder within the Green's function method, we disclose its damaging character on the spin splitting and the resulting altermagnetism. When the single-electron spin-polarized state at each Ti site is contributed almost equally by two or three $t_{2g}$ orbitals, LTO becomes antiferromagnetic. The effect of the spin-orbit coupling, which can cause orbital disorder and suppress altermagnetism, is discussed.

cond-mat.mtrl-sci↗

arXiv2024

Emerging two-dimensional conductivity at Mott-band insulator interface

Intriguingly conducting perovskite interfaces between ordinary band insulators are widely explored, whereas similar interfaces with Mott insulators are still not quite understood. Here we address the (001), (110), and (111) interfaces between the LaTiO$_{3}$ Mott- and large band gap KTaO$_{3}$ insulators. Based on first-principles calculations, we reveal a mechanism of interfacial conductivity, which is distinct from a formerly studied one applicable to interfaces between polar wide band insulators. Here the key factor causing conductivity is the matching of oxygen octahedra tilting in KTaO$_{3}$ and LaTiO$_{3}$ which, due to a small gap in the LaTiO$_{3}$ results in its sensitivity to the crystal structure, yields metalization of its overlayer and following charge transfer from Ti to Ta. Our findings, also applicable to other Mott insulators interfaces, shed light on the emergence of conductivity observed in LaTiO$_{3}$/KTaO$_{3}$~(110) where the ''polar`` arguments are not applicable and on the emergence of superconductivity in these structures.

cond-mat.mtrl-sci↗

arXiv2023

Superconductivity at epitaxial LaTiO3-KTaO3 interfaces

Design of epitaxial interfaces is a pivotal way to engineer artificial structures where new electronic phases can emerge. Here we report a systematic emergence of interfacial superconducting state in epitaxial heterostructures of LaTiO3 and KTaO3. The superconductivity transition temperature increases with decreasing the thickness of LaTiO3. Such behavior is observed for both (110) and (111) crystal oriented structures. For thick samples, the finite resistance developing below the superconducting transition temperature increases with increasing LaTiO3 thickness. Consistent with previous reports, the (001) oriented heterointerface features high electron mobility of 250 cm2/Vs and shows no superconducting transition down to 40 mK. Our results imply a non-trivial impact of LaTiO3 on the superconducting state and indicate how superconducting KTaO3 interfaces can be integrated with other oxide materials.

cond-mat.mtrl-sci↗

arXiv2021

Atomic scale spectral control of thermal transport in phononic crystal superlattices

We present experimental and theoretical investigations of phonon thermal transport in (LaMnO$_3$)$_m$/(SrMnO$_3$)$_n$ superlattices (LMO/SMO SLs) with the thickness of individual layers $m,n = 3 - 10\;$ u.c. and the thickness ratio $m/n = 1, 2$. Optical transient thermal reflectivity measurements reveal a pronounced difference in the thermal conductivity between SLs with $m/n = 1$, and SLs with $m/n = 2$. State-of-the art electron microscopy techniques and ab-initio density functional calculations enables us to assign the origin of this difference to the absence ($m/n = 1$) or presence ($m/n = 2$) of spatially periodic, static oxygen octahedral rotation (OOR) inside the LMO layers. The experimental data analysis shows that the effective thermal conductance of the LMO/SMO interfaces strongly changes from $0.3$ GW/m$^2$K for $m/n = 2$ SLs with OOR to a surprisingly large value of $1.8$ GW/m$^2$K for $m/n = 1$ SLs without OOR. An instructive lattice dynamical model rationalizes our experimental findings as a result of coherent phonon transmission for $m/n = 1$ versus coherent phonon blocking in SLs with $m/n = 2$. We briefly discuss the possibilities to exploit these results for atomic-scale engineering of a crystalline phonon insulator. The thermal resistivity of this proposal for a thermal metamaterial surpasses the amorphous limit, although phonons still propagate coherently.

cond-mat.mtrl-sci↗

arXiv2020

Perovskite-type cobalt oxide at the multiferroic Co/Pb Zr$_{0.2}$Ti$_{0.8}$O$_{3}$ interface

Magnetic Tunnel Junctions whose basic element consists of two ferromagnetic electrodes separated by an insulating non-magnetic barrier have become intensely studied and used in non-volatile spintronic devices. Since ballistic tunnel of spin-polarized electrons sensitively depends on the chemical composition and the atomic geometry of the lead/barrier interfaces their proper design is a key issue for achieving the required functionality of the devices such as e.g. a high tunnel magneto resistance. An important leap in the development of novel spintronic devices is to replace the insulating barrier by a ferroelectric which adds new additional functionality induced by the polarization direction in the barrier giving rise to the tunnel electro resistance (TER). The multiferroic tunnel junction Co/PbZr$_{0.2}$Ti$_{0.8}$O$_{3}$/La$_{2/3}$Sr$_{1/3}$MnO$_3$ (Co/PZT/LSMO) represents an archetype system for which - despite intense studies - no consensus exists for the interface geometry and their effect on transport properties. Here we provide the first analysis of the Co/PZT interface at the atomic scale using complementary techniques, namely x-ray diffraction and extended x-ray absorption fine structure in combination with x-ray magnetic circular dichroism and ab-initio calculations. The Co/PZT interface consists of one perovskite-type cobalt oxide unit cell [CoO$_{2}$/CoO/Ti(Zr)O$_{2}$] on which a locally ordered cobalt film grows. Magnetic moments (m) of cobalt lie in the range between m=2.3 and m=2.7$μ_{B}$, while for the interfacial titanium atoms they are small (m=+0.005 $μ_{B}$) and parallel to cobalt which is attributed to the presence of the cobalt-oxide interface layers. These insights into the atomistic relation between interface and magnetic properties is expected to pave the way for future high TER devices.

cond-mat.mtrl-sci↗

arXiv2020

Ab initio design of quaternary Heusler compounds for reconfigurable magnetic tunnel diodes and transistors

Reconfigurable magnetic tunnel diodes and transistors are a new concept in spintronics. The realization of such a device requires the use of materials with unique spin-dependent electronic properties such as half-metallic magnets (HMMs) and spin-gapless semiconductors (SGSs). Quaternary Heusler compounds offer a unique platform to design within the same family of compounds HMMs and SGSs with similar lattice constants to make coherent growth of the consecutive spacers of the device possible. Employing state-of-the-art first-principles calculations, we scan the quaternary Heusler compounds and identify suitable candidates for these spintronic devices combining the desirable properties: (i) HMMs with sizable energy gap or SGSs with spin gaps both below and above the Fermi level, (ii) high Curie temperature, (iii) convex hull energy distance less than 0.20 eV, and (iv) negative formation energies. Our results pave the way for the experimental realization of the proposed magnetic tunnel diodes and transistors.

cond-mat.mtrl-sci↗

arXiv2015

Study of electronic and magnetic properties and related x-ray absorption spectroscopy of ultrathin Co films on BaTiO$_3$

We present a first-principles study of electronic and magnetic properties of thin Co films on a BaTiO$_3$(001) single crystal. The crystalline structure of 1, 2, and 3 monolayer thick Co films was determined and served as input for calculations of the electronic and magnetic properties of the films. The estimation of exchange constants indicates that the Co films are ferromagnetic with a high critical temperature, which depends on the film thickness and the interface geometry. In addition, we calculated x-ray absorption spectra, related magnetic circular dichroism (XMCD) and linear dichroism (XLD) of the Co L$_{2,3}$ edges as a function of Co film thickness and ferroelectric polarization of BaTiO$_3$. We found characteristic features, which depend strongly on the magnetic properties and the structure of the film. While there is only a weak dependence of XMCD spectra on the ferroelectric polarization, the XLD of the films is much more sensitive to the polarization switching, which could possibly be observed experimentally.

cond-mat.mtrl-sci↗

arXiv2015

Impact of oxygen doping and oxidation state of iron on the electronic and magnetic properties of BaFeO$_{3-δ}

We studied structural, electronic and magnetic properties of a cubic perovskite BaFeO$_{3-δ}$ ($0 \le δ\le 0.5$) within the density functional theory using a generalized gradient approximation and a GGA+U method. According to our calculations, BaFeO$_3$ in its stoichiometric cubic structure should be half-metallic and strongly ferromagnetic, with extremely high Curie temperature ($T_C$) of 700 - 900 K. However, a such estimate of $T_C$ disagrees with all available experiments, which report that $T_C$ of the BaFeO$_3$ and undoped BaFeO$_{3-δ}$ films varies between 111 K and 235 K or, alternatively, that no ferromagnetic order was detected there. Fitting the calculated x-ray magnetic circular dichroism spectra to the experimental features seen for BaFeO$_3$, we concluded that the presence of oxygen vacancies in our model enables a good agreement. Thus, the relatively low $T_C$ measured in BaFeO$_3$ can be explained by oxygen vacancies intrinsically presented in the material. Since iron species near the O vacancy change their oxidation state from $4+$ to $3+$, the interaction between Fe$^{4+}$ and Fe$^{3+}$, which is antiferromagnetic, weakens the effective magnetic interaction in the system, which is predominantly ferromagnetic. With increasing $δ$ in BaFeO$_{3-δ}$, its $T_C$ decreases down to the critical value when the magnetic order becomes antiferromagnetic. Our calculations of the electronic structure of BaFeO$_{3-δ}$ illustrate how the ferromagnetism originates and also how one can keep this cubic perovskite robustly ferromagnetic far above the room temperature.

cond-mat.mtrl-sci↗

arXiv2013

Exchange interaction and its tuning in magnetic binary chalcogenides

Using a first-principles Green's function approach we study magnetic properties of the magnetic binary chalcogenides Bi2Te3, Bi2Se3, and Sb2Te3. The magnetic coupling between transition-metal impurities is long-range, extends beyond a quintuple layer, and decreases with increasing number of d electrons per 3d atom. We find two main mechanisms for the magnetic interaction in these materials: the indirect exchange interaction mediated by free carriers and the indirect interaction between magnetic moments via chalcogen atoms. The calculated Curie temperatures of these systems are in good agreement with available experimental data. Our results provide deep insight into magnetic interactions in magnetic binary chalcogenides and open a way to design new materials for promising applications.

cond-mat.mtrl-sci↗

arXiv2010

Strong influence of the complex bandstructure on the tunneling electroresistance: A combined model and ab-initio study

The tunneling electroresistance (TER) for ferroelectric tunnel junctions (FTJs) with BaTiO_{3} (BTO) and PbTiO}_{3} (PTO) barriers is calculated by combining the microscopic electronic structure of the barrier material with a macroscopic model for the electrostatic potential which is caused by the ferroelectric polarization. The TER ratio is investigated in dependence on the intrinsic polarization, the chemical potential, and the screening properties of the electrodes. A change of sign in the TER ratio is obtained for both barrier materials in dependence on the chemical potential. The inverse imaginary Fermi velocity describes the microscopic origin of this effect; it qualitatively reflects the variation and the sign reversal of the TER. The quantity of the imaginary Fermi velocity allows to obtain detailed information on the transport properties of FTJs by analyzing the complex bandstructure of the barrier material.

cond-mat.mtrl-sci↗

arXiv2010

Tuning independently Fermi energy and spin splitting in Rashba systems: Ternary surface alloys on Ag(111)

By detailed first-principles calculations we show that the Fermi energy and the Rashba splitting in disordered ternary surface alloys (BiPbSb)/Ag(111) can be independently tuned by choosing the concentrations of Bi and Pb. The findings are explained by three fundamental mechanisms, namely the relaxation of the adatoms, the strength of the atomic spin-orbit coupling, and band filling. By mapping the Rashba characteristics,i.e.the splitting and the Rashba energy, and the Fermi energy of the surface states in the complete range of concentrations. Our results suggest to investigate experimentally effects which rely on the Rashba spin-orbit coupling in dependence on spin-orbit splitting and band filling.

cond-mat.mtrl-sci↗

arXiv2009

Silicon surface with giant spin-splitting

We demonstrate the induction of a giant Rashba-type spin-splitting on a semiconducting substrate by means of a Bi trimer adlayer on a Si(111) wafer. The in-plane inversion symmetry is broken so that the in-plane potential gradient induces a giant spin-splitting with a Rashba energy of about 140 meV, which is more than an order of magnitude larger than what has previously been reported for any semiconductor heterostructure. The separation of the electronic states is larger than their lifetime broadening, which has been directly observed with angular resolved photoemission spectroscopy. The experimental results are confirmed by relativistic first-principles calculations. We envision important implications for basic phenomena as well as for the semiconductor based technology.

cond-mat.mtrl-sci↗

arXiv2009

Magnetic Anisotropy and Magnetization Dynamics of Individual Atoms and Clusters of Fe and Co on Pt(111)

The recently discovered giant magnetic anisotropy of single magnetic Co atoms raises the hope of magnetic storage in small clusters. We present a joint experimental and theoretical study of the magnetic anisotropy and the spin dynamics of Fe and Co atoms, dimers, and trimers on Pt(111). Giant anisotropies of individual atoms and clusters as well as lifetimes of the excited states were determined with inelastic scanning tunneling spectroscopy. The short lifetimes due to hybridization-induced electron-electron scattering oppose the magnetic stability provided by the magnetic anisotropies.

cond-mat.mtrl-sci↗

arXiv2008

Effect of the surface polarization in polar perovskites studied from first principles

The (001) surfaces of polar perovskites BaTiO$_3$ and PbTiO$_3$ have been studied from first principles at T=0 K. For both cases of polarization, the most stable TiO-terminated interfaces show intrinsic ferroelectricity. In the topmost layer, where the O atoms are $>$0.1 Åabove Ti, this leads to metallic instead of the insulating behavior of the electronic states that may have important implications for multiferroic tunneling junctions.

cond-mat.mtrl-sci↗

arXiv2006

An ab-initio theory for the temperature dependence of magnetic anisotropy

We present a first-principles theory of the variation of magnetic anisotropy, K, with temperature, T, in metallic ferromagnets. It is based on relativistic electronic structure theory and calculation of magnetic torque. Thermally induced `local moment' magnetic fluctuations are described within the relativistic generalisation of the `disordered local moment' (R-DLM) theory from which the T dependence of the magnetisation, m, is found. We apply the theory to a uniaxial magnetic material with tetragonal crystal symmetry, L1_0-ordered FePd, and find its uniaxial K consistent with a magnetic easy axis perpendicular to the Fe/Pd layers for all m and proportional to m squared for a broad range of values of m. This is the same trend that we have previously found in L1_0-ordered FePt and which agrees with experiment. This account, however, differs qualitatively from that extracted from a single ion anisotropy model. We also study the magnetically soft cubic magnet, the Fe(50)Pt(50) solid solution, and find that its small magnetic anisotropy constant K_1 rapidly diminishes from 8 micro-eV to zero. K evolves from being proportional to the seventh power of m at low T to the fourth power near the Curie temperature.

cond-mat.mtrl-sci↗

arXiv2004

Temperature dependent magnetic anisotropy in metallic magnets from an ab-initio electronic structure theory: L1_0-ordered FePt

On the basis of a first-principles, relativistic electronic structure theory of finite temperature metallic magnetism, we investigate the variation of magnetic anisotropy, K, with magnetisation, M, in metallic ferromagnets. We apply the theory to the high magnetic anisotropy material, L1_0-ordered FePt, and find its uniaxial K consistent with a magnetic easy axis perpendicular to the Fe/Pt layering for all M and to be proportional to M^2 for a broad range of values of M. For small M, near the Curie temperature, the calculations pick out the easy axis for the onset of magnetic order. Our results are in good agreement with recent experimental measurements on this important magnetic material.

cond-mat.mtrl-sci↗

arXiv2004

An ab-initio theoretical investigation of the soft-magnetic properties of permalloys

We study Ni80Fe20-based permalloys with the relativistic spin-polarized Korringa-Kohn-Rostoker electronic structure method. Treating the compositional disorder with the coherent potential approximation, we investigate how the magnetocrystalline anisotropy, K, and magnetostriction, lambda, of Ni-rich Ni-Fe alloys vary with the addition of small amounts of non-magnetic transition metals, Cu and Mo. From our calculations we follow the trends in K and lambda and find the compositions of Ni-Fe-Cu and Ni-Fe-Mo where both are near zero. These high permeability compositions of Ni-Fe-Cu and Ni-Fe-Mo match well with those discovered experimentally. We monitor the connection of the magnetic anisotropy with the number of minority spin electrons, Nmin. By raising Nmin via artificially increasing the band-filling of Ni80Fe20, we are able to reproduce the key features that underpin the magnetic softening we find in the ternary alloys. The effect of band-filling on the dependence of magnetocrystalline anisotropy on atomic short-range order in Ni80Fe20 is also studied. Our calculations, based on a static concentration wave theory, indicate that the susceptibility of the high permeability of the Ni-Fe-Cu and Ni-Fe-Mo alloys to their annealing conditions is also strongly dependent on the alloys' compositions. An ideal soft magnet appears from these calculations.

cond-mat.mtrl-sci↗