arXiv subjects

S. Roddaro

Publications and source records attributed to S. Roddaro.

At least 19 recordsLinked to original sources

arXiv2026

Background of the BULLKID detector array operated with moderate shield on surface

We present the operation with moderate radiation shield in a surface laboratory of BULLKID (BULky and Low-threshold Kinetic Inductance Detector), a cryogenic detector for searches of light Dark Matter or Coherent Elastic Neutrino-Nucleus Scattering. The detector consists of an array of 60 cubic silicon particle absorbers of 0.34 g each, sensed by cryogenic kinetic inductance detectors. The analysis presented focuses on data from 15 elements of the array, with two central units used to evaluate the background and with their surrounding elements used as veto. The low energy spectrum resulting from an exposure of 290 hours to ambient backgrounds, acquired with the use of external and internal radiation shields, is compatible with the simulations at the level of $(6.8\pm0.4\,{\rm stat.}\pm0.1\,{\rm syst.})\times10^4$ counts / keV kg days from 2 keV down to an energy of 600 eV. The region between 225 eV and 600 eV shows a rise in background in disagreement with the simulations, while not sharing some of the key traits of the low energy excess observed in other cryogenic experiments. The high energy spectrum shape is in overall agreement with the simulations and displays the typical particle-induced X-ray emission of the surrounding lead.

hep-ex↗

arXiv2026

Projected sensitivity to light WIMP-like particles of the BULLKID-DM experiment

BULLKID-DM is an experiment designed for the direct searches of particle dark matter candidates with mass around 1 GeV, or below, and cross-section with nucleons smaller than $10^{-40}$ cm$^2$. The detector consists of a stack of diced silicon wafers, acting as arrays of particle absorbers, sensed by multiplexed Kinetic Inductance Detectors. The target will amount to 800 g subdivided in more than 2000 silicon dice, with the aim of controlling the background from natural radioactivity by creating a fully active structure and by applying fiducialization techniques. In this work we present the projected sensitivity of BULLKID-DM to light WIMP-like particles considering also the other future experiments in the field.

physics.ins-det↗

arXiv2025

Energy calibration of bulk events in the BULLKID detector

BULLKID is a cryogenic, solid-state detector designed for direct searches of particle Dark Matter candidates, with mass $\lesssim 1$ GeV/c$^2$, and coherent neutrino-nucleus scattering. It is based on an array of dice carved in 5 mm thick silicon crystal, sensed by phonon-mediated Kinetic Inductance Detectors. In previous works, the array was calibrated with bursts of optical photons, which are absorbed in the first hundreds nanometers of the dice and give rise to surface events. In this work, we present the reconstruction of bulk events through the 59.5 keV $\gamma$-ray generated by an $^{241}$Am source, which emulates more closely the interaction of Dark Matter and neutrinos. The peak resolution is $5\%~(\sigma)$ and its position is shifted by less than $10\%$ with respect to the optical calibration. We observe that the resolution is further improved by a factor $2$ combining the signal from neighboring dice. These results confirm the performance of the detector in view of the physics goals of the BULLKID-DM experiment for dark matter search.

physics.ins-det↗

arXiv2025

Real-Time Readout System Design for the BULLKID-DM Experiment: Enhancing Dark Matter Search Capabilities

The BULLKID-DM experiment aims to detect WIMP-like potential Dark Matter particles with masses below 1 GeV/c^2. Sensing these particles is challenging, as it requires nuclear recoil detectors characterized by high exposure and an energy threshold in the order of 100 eV, thus exceeding the capabilities of conventional semiconductor detectors. BULLKID-DM intends to tackle this challenge by using cryogenic Kinetic Inductance Detectors (MKIDs) with exceptional energy thresholds to sense a target with a total mass of 800 g across 16 wafers, divided into over 2000 individually instrumented silicon dice. The MKIDs on each wafer are coupled to a single transmission line and read using a frequency division multiplexing approach by the room-temperature data acquisition. In this contribution, we describe and assess the design of the room-temperature readout electronics system, including the selected hardware components and the FPGA firmware which contains the real-time signal processing stages for tone generation, frequency demultiplexing, and event triggering. We evaluate the system on the ZCU216 board, a commercial evaluation card built around a Radio-Frequency System-on-Chip (RFSoC) with integrated high-speed DACs and ADCs, and connected it to a custom-designed analog front-end for signal conditioning.

physics.ins-det↗

arXiv2024

Enhanced sensitivity of sub-THz thermomechanical bolometers exploiting vibrational nonlinearity

A common approach to detecting weak signals or minute quantities involves leveraging the localized spectral features of resonant modes, whose sharper lines (i.e. high Q-factors) enhance transduction sensitivity. However, maximizing the Q-factor often introduces technical challenges in fabrication and design. In this work, we propose an alternative strategy to achieve sharper spectral features by using interference and nonlinearity, all while maintaining a constant dissipation rate. Using far-infrared thermomechanical detectors as a test case, we demonstrate that signal transduction along an engineered response curve slope effectively reduces the detector's noise equivalent power (NEP), achieving $\mathrm{\sim 30 \, pW/\sqrt{Hz}}$ NEP for electrical read-out, sub-THz detectors with an optimized absorbing layer.

physics.optics↗

arXiv2022

Light emission properties of mechanical exfoliation induced extended defects in hexagonal boron nitride flakes

Recently hBN has become an interesting platform for quantum optics due to the peculiar defect-related luminescence properties. Concomitantly, hBN was established as the ideal insulating support for realizing 2D materials device, where, on the contrary, defects can affect the device performance. In this work, we study the light emission properties of hBN flakes obtained by mechanical exfoliation with particular focus on extended defects generated in the process. In particular, we tackle different issues as the light emission in hBN flakes of different thicknesses in the range of hundreds of nm, revealing a higher concentration of deep level emission in thinner area of the flake. We recognize the effect of crystal deformation in some areas of the flake with an important blue-shift (130 meV) of the room temperature near band edge emission of hBN and the concurrent presence of a novel emission at 2.36 eV related to the formation of array of dislocations. We studied the light emission properties by means of cathodoluminescence and sub-bandgap excitation photoluminescence of thickness steps with different crystallographic orientations, revealing the presence of different concentration of radiative centers. CL mapping allows to detect buried thickness steps, invisible to the SEM and AFM morphological analysis.

cond-mat.mtrl-sci↗

arXiv2019

Going beyond copper: wafer-scale synthesis of graphene on sapphire

The adoption of graphene in electronics, optoelectronics and photonics is hindered by the difficulty in obtaining high quality material on technologically-relevant substrates, over wafer-scale sizes and with metal contamination levels compatible with industrial requirements. To date, the direct growth of graphene on insulating substrates has proved to be challenging, usually requiring metal-catalysts or yielding defective graphene. In this work, we demonstrate a metal-free approach implemented in commercially available reactors to obtain high-quality monolayer graphene on c-plane sapphire substrates via chemical vapour deposition (CVD). We identify via low energy electron diffraction (LEED), low energy electron microscopy (LEEM) and scanning tunneling microscopy (STM) measurements the Al-rich reconstruction root31R9 of sapphire to be crucial for obtaining epitaxial graphene. Raman spectroscopy and electrical transport measurements reveal high-quality graphene with mobilities consistently above 2000 cm2/Vs. We scale up the process to 4-inch and 6-inch wafer sizes and demonstrate that metal contamination levels are within the limits for back-end-of-line (BEOL) integration. The growth process introduced here establishes a method for the synthesis of wafer-scale graphene films on a technologically viable basis.

physics.app-ph↗

arXiv2018

Classical effects in the weak-field magnetoresistance of InGaAs/InAlAs quantum wells

We observe an unusual behavior of the low-temperature magnetoresistance of the high-mobility two-dimensional electron gas in InGaAs/InAlAs quantum wells in weak perpendicular magnetic fields. The observed magnetoresistance is qualitatively similar to that expected for the weak localization and anti-localization but its quantity exceeds significantly the scale of the quantum corrections. The calculations show that the obtained data can be explained by the classical effects in electron motion along the open orbits in a quasiperiodic potential relief manifested by the presence of ridges on the quantum well surface.

cond-mat.mes-hall↗

arXiv2016

Dephasing in strongly anisotropic black phosphorus

Weak localization was observed and determined in a black phosphorus (bP) field-effect transistor 65 nm thick. The weak localization behaviour was found to be in excellent agreement with the Hikami-Larkin-Nagaoka model for fields up to 1~T, from which characteristic scattering lengths could be inferred. The dephasing length $L_ϕ$ was found to increase linearly with increasing hole density attaining a maximum value of 55 nm at a hole density of approximately $10^{13} cm^{-2}$ inferred from the Hall effect. The temperature dependence of $L_ϕ$ was also investigated and above 1~K, it was found to decrease weaker than the $L_ϕ\propto T^{-\frac{1}{2}}$ dependence characteristic of electron-electron scattering in the presence of elastic scattering in two dimensions. Rather, the observed power law was found to be close to that observed previously in other quasi-one-dimensional systems such as metallic nanowires and carbon nanotubes. We attribute our result to the crystal structure of bP which host a `puckered' honeycomb lattice forming a strongly anisotropic medium

cond-mat.mes-hall↗

arXiv2016

Local noise in a diffusive conductor

The control and measurement of local non-equilibrium configurations is of utmost importance in applications on energy harvesting, thermoelectrics and heat management in nano-electronics. This challenging task can be achieved with the help of various local probes, prominent examples including superconducting or quantum dot based tunnel junctions, classical and quantum resistors, and Raman thermography. Beyond time-averaged properties, valuable information can also be gained from spontaneous fluctuations of current (noise). From these perspective, however, a fundamental constraint is set by current conservation, which makes noise a characteristic of the whole conductor, rather than some part of it. Here we demonstrate how to remove this obstacle and pick up a local noise temperature of a current biased diffusive conductor with the help of a miniature noise probe. This approach is virtually noninvasive and extends primary local measurements towards strongly non-equilibrium regimes.

cond-mat.mes-hall↗

arXiv2016

Noise thermometry applied to thermoelectric measurements in InAs nanowires

We apply noise thermometry to characterize charge and thermoelectric transport in single InAs nanowires (NWs) at a bath temperature of 4.2 K. Shot noise measurements identify elastic diffusive transport in our NWs with negligible electron-phonon interaction. This enables us to set up a measurement of the diffusion thermopower. Unlike in previous approaches, we make use of a primary electronic noise thermometry to calibrate a thermal bias across the NW. In particular, this enables us to apply a contact heating scheme, which is much more efficient in creating the thermal bias as compared to conventional substrate heating. The measured thermoelectric Seebeck coefficient exhibits strong mesoscopic fluctuations in dependence on the back-gate voltage that is used to tune the NW carrier density. We analyze the transport and thermoelectric data in terms of approximate Mott's thermopower relation and to evaluate a gate-voltage to Fermi energy conversion factor.

cond-mat.mes-hall↗

arXiv2016

Transport in strongly-coupled graphene-LaAlO3/SrTiO3 hybrid systems

We report on the transport properties of hybrid devices obtained by depositing graphene on a LaAlO3/SrTiO3 oxide junction hosting a 4 nm-deep two-dimensional electron system. At low graphene-oxide inter-layer bias the two electron systems are electrically isolated, despite their small spatial separation, and very efficient reciprocal gating is shown. A pronounced rectifying behavior is observed for larger bias values and ascribed to the interplay between electrostatic depletion and tunneling across the LaAlO3 barrier. The relevance of these results in the context of strongly-coupled bilayer systems is discussed.

cond-mat.mes-hall↗

arXiv2016

Magnetically-driven colossal supercurrent enhancement in InAs nanowire Josephson junctions

The Josephson effect is a fundamental quantum phenomenon consisting in the appearance of a dissipationless supercurrent in a weak link between two superconducting (S) electrodes. While the mechanism leading to the Josephson effect is quite general, i.e., Andreev reflections at the interface between the S electrodes and the weak link, the precise physical details and topology of the junction drastically modify the properties of the supercurrent. Specifically, a strong enhancement of the critical supercurrent $I_C$ is expected to occur when the topology of the junction allows the emergence of Majorana bound states. Here we report charge transport measurements in mesoscopic Josephson junctions formed by InAs nanowires and Ti/Al superconducting leads. Our main observation is a colossal enhancement of the critical supercurrent induced by an external magnetic field applied perpendicular to the substrate. This striking and anomalous supercurrent enhancement cannot be ascribed to any known conventional phenomenon existing in Josephson junctions including, for instance, Fraunhofer-like diffraction or a $π$-state behavior. We also investigate an unconventional model related to inhomogenous Zeeman field caused by magnetic focusing, and note that it can not account for the observed behaviour. Finally, we consider these results in the context of topological superconductivity, and show that the observed $I_C$ enhancement is compatible with a magnetic field-induced topological transition of the junction.

cond-mat.mes-hall↗

arXiv2015

Pb/InAs nanowire Josephson junction with high critical current and magnetic flux focusing

We have studied mesoscopic Josephson junctions formed by highly $n$-doped InAs nanowires and superconducting Ti/Pb source and drain leads. The current-voltage properties of the system are investigated by varying temperature and external out-of-plane magnetic field. Superconductivity in the Pb electrodes persists up to $ \sim 7$ K and with magnetic field values up to 0.4 T. Josephson coupling at zero backgate voltage is observed up to 4.5 K and the critical current is measured to be as high as 615 nA. The supercurrent suppression as a function of the magnetic field reveals a diffraction pattern that is explained by a strong magnetic flux focusing provided by the superconducting electrodes forming the junction.

cond-mat.mes-hall↗

arXiv2013

Selective control of edge-channel trajectories by scanning gate microscopy

Electronic Mach-Zehnder interferometers in the Quantum Hall (QH) regime are currently discussed for the realization of quantum information schemes. A recently proposed device architecture employs interference between two co-propagating edge channels. Here we demonstrate the precise control of individual edge-channel trajectories in quantum point contact devices in the QH regime. The biased tip of an atomic force microscope is used as a moveable local gate to pilot individual edge channels. Our results are discussed in light of the implementation of multi-edge interferometers.

cond-mat.mes-hall↗

arXiv2011

A Josephson Quantum Electron Pump

A macroscopic fluid pump works according to the law of Newtonian mechanics and transfers a large number of molecules per cycle (of the order of 10^23). By contrast, a nano-scale charge pump can be thought as the ultimate miniaturization of a pump, with its operation being subject to quantum mechanics and with only few electrons or even fractions of electrons transfered per cycle. It generates a direct current in the absence of an applied voltage exploiting the time-dependence of some properties of a nano-scale conductor. The idea of pumping in nanostructures was discussed theoretically a few decades ago [1-4]. So far, nano-scale pumps have been realised only in system exhibiting strong Coulombic effects [5-12], whereas evidence for pumping in the absence of Coulomb-blockade has been elusive. A pioneering experiment by Switkes et al. [13] evidenced the difficulty of modulating in time the properties of an open mesoscopic conductor at cryogenic temperatures without generating undesired bias voltages due to stray capacitances [14,15]. One possible solution to this problem is to use the ac Josephson effect to induce periodically time-dependent Andreev-reflection amplitudes in a hybrid normal-superconducting system [16]. Here we report the experimental detection of charge flow in an unbiased InAs nanowire (NW) embedded in a superconducting quantum interference device (SQUID). In this system, pumping may occur via the cyclic modulation of the phase of the order parameter of different superconducting electrodes. The symmetry of the current with respect to the enclosed magnetic flux [17,18] and bias SQUID current is a discriminating signature of pumping. Currents exceeding 20 pA are measured at 250 mK, and exhibit symmetries compatible with a pumping mechanism in this setup which realizes a Josephson quantum electron pump (JQEP).

cond-mat.mes-hall↗

arXiv2010

InAs nanowire hot-electron Josephson transistor

At a superconductor (S)-normal metal (N) junction pairing correlations can "leak-out" into the N region. This proximity effect [1, 2] modifies the system transport properties and can lead to supercurrent flow in SNS junctions [3]. Recent experimental works showed the potential of semiconductor nanowires (NWs) as building blocks for nanometre-scale devices [4-7], also in combination with superconducting elements [8-12]. Here, we demonstrate an InAs NW Josephson transistor where supercurrent is controlled by hot-quasiparticle injection from normal-metal electrodes. Operational principle is based on the modification of NW electron-energy distribution [13-20] that can yield reduced dissipation and high-switching speed. We shall argue that exploitation of this principle with heterostructured semiconductor NWs opens the way to a host of out-of-equilibrium hybrid-nanodevice concepts [7, 21].

cond-mat.mes-hall↗

arXiv2008

Analyzing capacitance-voltage measurements of vertical wrapped-gated nanowires

The capacitance of arrays of vertical wrapped-gate InAs nanowires are analyzed. With the help of a Poisson-Schr"odinger solver, information about the doping density can be obtained directly. Further features in the measured capacitance-voltage characteristics can be attributed to the presence of surface states as well as the coexistence of electrons and holes in the wire. For both scenarios, quantitative estimates are provided. It is furthermore shown that the difference between the actual capacitance and the geometrical limit is quite large, and depends strongly on the nanowire material.

cond-mat.other↗