arXiv subjects

S. Scuderi

Publications and source records attributed to S. Scuderi.

At least 19 recordsLinked to original sources

arXiv2025

The New Architecture of the Online Observation Quality System for the ASTRI Mini-Array Project

The ASTRI Mini-Array is an international collaboration led by the Italian National Institute for Astrophysics. The project aims to construct and operate an array of nine Imaging Atmospheric Cherenkov Telescopes to study gamma-ray sources at very high energy (TeV) and perform stellar intensity interferometry observations. We describe the updated Online Observation Quality System (OOQS) software architecture. The OOQS is one of the subsystems of the Supervisory Control and Data Acquisition (SCADA) system. It aims to execute real-time data quality checks on the data acquired by the Cherenkov cameras and intensity interferometry instruments and provide feedback to both SCADA and the Operator about abnormal conditions detected. The data quality results are stored in the Quality Archive for further investigation and sent to the Operator Human Machine Interface (HMI) through Kafka.

astro-ph.IM↗

arXiv2024

End-to-End simulation framework for astronomical spectrographs: SOXS, CUBES and ANDES

We present our numerical simulation approach for the End-to-End (E2E) model applied to various astronomical spectrographs, such as SOXS (ESO-NTT), CUBES (ESO-VLT), and ANDES (ESO-ELT), covering multiple wavelength regions. The E2E model aim at simulating the expected astronomical observations starting from the radiation of the scientific sources (or calibration sources) up to the raw-frame data produced by the detectors. The comprehensive description includes E2E architecture, computational models, and tools for rendering the simulated frames. Collaboration with Data Reduction Software (DRS) teams is discussed, along with efforts to meet instrument requirements. The contribution to the cross-correlation algorithm for the Active Flexure Compensation (AFC) system of CUBES is detailed.

astro-ph.IM↗

arXiv2024

Final Alignment and Image Quality Test for the Acquisition and Guiding System of SOXS

SOXS (Son Of X-Shooter) will be the new medium-resolution (R 4500 for 1 slit), high-efficiency, wide-band spectrograph for the ESO NTT at La Silla Observatory, Chile. It will be dedicated to the follow-up of any kind of transient events, ensuring fast time, high efficiency, and availability. It consists of a central structure (common path) that supports two spectrographs optimized for the UV-Visible and a Near-Infrared range. Attached to the common path is the Acquisition and Guiding Camera system (AC), equipped with a filter wheel that can provide science-grade imaging and moderate high-speed photometry. The AC Unit was integrated and aligned during the summer months of 2022 and has since been mounted in the NTTs telescope simulator. This work gives an update on the Acquisition Camera Unit status, describes the Image Quality Tests that were performed, and discusses the AC Optical Performance.

astro-ph.IM↗

arXiv2024

SOXS NIR: Optomechanical integration and alignment, optical performance verification before full instrument assembly

This paper presents the opto-mechanical integration and alignment, functional and optical performance verification of the NIR arm of Son Of X-Shooter (SOXS) instrument. SOXS will be a single object spectroscopic facility for the ESO-NTT 3.6-m telescope, made by two arms high efficiency spectrographs, able to cover the spectral range 350 2050 nm with a mean resolving power R~4500. In particular the NIR arm is a cryogenic echelle cross-dispersed spectrograph spanning the 780-2050 nm range. We describe the integration and alignment method performed to assemble the different opto-mechanical elements and their installation on the NIR vacuum vessel, which mostly relies on mechanical characterization. The tests done to assess the image quality, linear dispersion and orders trace in laboratory conditions are summarized. The full optical performance verification, namely echellogram format, image quality and resulting spectral resolving power in the whole NIR arm (optical path and science detector) is detailed. Such verification is one of the most relevant prerequisites for the subsequent full instrument assembly and provisional acceptance in Europe milestone, foreseen in 2024.

astro-ph.IM↗

arXiv2024

Walking with SOXS towards the transient sky

SOXS (Son Of X-Shooter) is the new ESO instrument that is going to be installed on the 3.58-m New Technology Telescope at the La Silla Observatory. SOXS is a single object spectrograph offering a wide simultaneous spectral coverage from U- to H-band. Although such an instrument may have potentially a large variety of applications, the consortium designed it with a clear science case: it is going to provide the spectroscopic counterparts to the ongoing and upcoming imaging surveys, becoming one of the main follow-up instruments in the Southern hemisphere for the classification and characterization of transients. The NTT+SOXS system is specialized to observe all transients and variable sources discovered by imaging surveys with a flexible schedule maintained by the consortium, based on a remote scheduler which will interface with the observatory software infrastructure. SOXS is realized timely to be highly synergic with transients discovery machines like the Vera C. Rubin Observatory. The instrument has been integrated and tested in Italy, collecting and assembling subsystems coming from all partners spread over six countries in three continents. The first preparatory activities in Chile have been completed at the telescope. This article gives an updated status of the project before the shipping of the instrument to Chile.

astro-ph.IM↗

arXiv2024

Characterisation and assessment of the SOXS Spectrograph UV-VIS Detector System

The SOXS spectrograph, designed for the ESO NTT telescope, operates in both the optical (UV-VIS: 350-850 nm) and NIR (800-2000 nm) bands. This article provides an overview of the final tests conducted on the UV-VIS camera system using a telescope simulator. It details the system's performance evaluation, including key metrics such as gain, readout noise, and linearity, and highlights the advancements made in the upgraded acquisition system. The testing process, conducted in the Padua laboratory, involved comprehensive simulations of the telescope environment to ensure the results closely resemble those expected at the ESO-NTT telescope. The successful completion of these tests confirms the system's readiness for deployment to Chile, where it will be installed on the NTT telescope, marking a significant milestone in the SOXS project.

astro-ph.IM↗

arXiv2024

The Online Observation Quality System Implementation for the ASTRI Mini-Array Project

The ASTRI Mini-Array project, led by the Italian National Institute for Astrophysics, aims to construct and operate nine Imaging Atmospheric Cherenkov Telescopes for high-energy gamma-ray source study and stellar intensity interferometry. Located at the Teide Astronomical Observatory in Tenerife, the project's software is essential for remote operation, emphasizing the need for prompt feedback on observations. This contribution introduces the Online Observation Quality System (OOQS) as part of the Supervisory Control And Data Acquisition (SCADA) software. OOQS performs real-time data quality checks on data from Cherenkov cameras and Intensity Interferometry instruments. It provides feedback to SCADA and operators, highlighting abnormal conditions and ensuring quick corrective actions for optimal observations. Results are archived for operator visualization and further analysis. The OOQS data quality pipeline prototype utilizes a distributed application with three main components to handle the maximum array data rate of 1.15 Gb/s. The first is a Kafka consumer that manages the data stream from the Array Data Acquisition System through Apache Kafka, handling the data serialization and deserialization involved in the transmission. The data stream is divided into batches of data written in files. The second component monitors new files and conducts analyses using the Slurm workload scheduler, leveraging its parallel processing capabilities and scalability. Finally, the process results are collected by the last component and stored in the Quality Archive.

astro-ph.IM↗

arXiv2023

The Online Observation Quality System Software Architecture for the ASTRI Mini-Array Project

The ASTRI Mini-Array is an international collaboration led by the Italian National Institute for Astrophysics. This project aims to construct and operate an array of nine Imaging Atmospheric Cherenkov Telescopes to study gamma-ray sources at very high energy (TeV) and perform stellar intensity interferometry observations. We describe the software architecture and the technologies used to implement the Online Observation Quality System (OOQS) for the ASTRI Mini-Array project. The OOQS aims to execute data quality checks on the data acquired in real-time by the Cherenkov cameras and intensity interferometry instruments, and provides feedback to both the Central Control System and the Operator about abnormal conditions detected. The OOQS can notify other sub-systems, triggering their reaction to promptly correct anomalies. The results from the data quality analyses (e.g. camera plots, histograms, tables, and more) are stored in the Quality Archive for further investigation and they are summarised in reports available to the Operator. Once the OOQS results are stored, the operator can visualize them using the Human Machine Interface. The OOQS is designed to manage the high data rate generated by the instruments (up to 4.5 GB/s) and received from the Array Data Acquisition System through the Kafka service. The data are serialized and deserialized during the transmission using the Avro framework. The Slurm workload scheduler executes the analyses exploiting key features such as parallel analyses and scalability.

astro-ph.IM↗

arXiv2023

The CCD Controller and Detector

All the scientific instruments of the Italian National Telescope "Galileo" (TNG). as well as the tracking systems and the Shack-Hartmann wavefront systems use CCDs as detectors. The CCD procurement is crucial to optimize the instruments performance, and, of course, equal importance assumes the design and realization of controllers able to drive various kinds of CCDs with a very low readout noise. Detectors characterization is of fundamental importance when they have to be used in scientific instrumentation. Various CCDs have been assembled in cryostats and tested at our laboratory in order to select the suitable detector for the optical instruments of the TNG. The relevant phases of the group activity are here described, as well as the commissioning at the telescope and the work that is in progress.

astro-ph.IM↗

arXiv2023

OIG and Sarg CCD's characterization

CCDs characterization is the preliminary step to perform before the CCD can be properly used at the telescope. Most of the scientific instrumentation at the Italian National Telescope Galileo use CCDs as detectors. In particular the optical imager (OIG) and the high resolution spectrograph (SARG) use a mosaic of two 2k X 4k CCD manufactured by EEV (EEV 4280). The technical characteristics of the EEV4280 can be found in Cosentino et al (these proceedings).

astro-ph.IM↗

arXiv2023

SARG control system

The control system and the entire architecture of the High Resolution Spectrograph (SARG) for the Italian National Telescope "Galileo" (TNG) are here described. The concept of SARG instrument controls is similar to that of the other TNG instruments, in particular the CCD detector driving and the image acquisition use the same TNG standard boards and the same selected bus: the VME. The link between the SARG VME and the other telescope components is based on the same GATE software that guarantees the compatibility with the entire distributed TNG software. The control of the moving parts as well as the other parts of instrument that is the lamp controller and the temperature sensors, is based on a commercial controller connected to the system through a serial link. Furthermore a specialized software running on a PC has been realized to test the rotating tables independently of the VME system. Test of accuracy and repeatability of the positioning were done and some results are presented.

astro-ph.IM↗

arXiv2023

CCDs for the instrumentation of the Telescopio Nazionale Galileo

Most of the scientific instrumentation as well as the tracking systems and the Shack- Hartmann wavefront analysers at the Italian National Telescope Galileo use CCDs as detectors. The characterization of detectors is of fundamental importance for their correct utilization in scientific instrumentation. We report on the measurement of the electro-optical characteristics of CCDs that will be used in the scientific instrumentation at the Italian National Telescope. In particular we will show and compare the quantum eÆciency, the charge transfer eÆciency, the dark current, the read out noise the uniformity and the linearity of two sets of CCDs manufactured by EEV and LORAL. Finally, we will show the preliminary tests done at the telescope with the optical imager that has a mosaic of two EEV chips.

astro-ph.IM↗

arXiv2023

The ASTRI Cherenkov Camera: from the prototype to the industrial version for the Mini-Array

The observation of energetic astronomical sources emitting very high-energy gamma-rays in the TeV spectral range (as e.g. supernova remnants or blazars) is mainly based on detecting the Cherenkov light induced by relativistic particles in the showers produced by the photon interaction with the Earth atmosphere. The ASTRI Mini-Array is an INAF-led project aimed observing such celestial objects in the 1 - 100 TeV energy range. It consists of an array of nine innovative imaging atmospheric Cherenkov telescopes that are an evolution of the dual-mirror aplanatic ASTRI-Horn telescope operating at the INAF "M.C. Fracastoro" observing station (Serra La Nave, Mount Etna, Italy). The ASTRI Mini-Array is currently under construction at the Observatorio del Teide (Tenerife, Spain). In this paper, we present the compact (diameter 660mm, height 520mm, weight 73kg) ASTRI-Horn prototype Cherenkov Camera based on a modular multipixel Silicon Photon Multiplier (SiPM) detector, has been acquiring data since 2016 and allowing us to obtain both scientific data and essential lessons. In this contribution, we report the main features of the camera and its evolution toward the new Cherenkov camera, which will be installed on each ASTRI Mini-Array telescope to cover an unprecedented field of view of 10.5°.

astro-ph.IM↗

arXiv2022

Progress on the simulation tools for the SOXS spectrograph: Exposure time calculator and End-to-End simulator

We present the progresses of the simulation tools, the Exposure Time Calculator (ETC) and End-to-End simulator (E2E), for the Son Of X-Shooter (SOXS) instrument at the ESO-NTT 3.58-meter telescope. The SOXS will be a single object spectroscopic facility, made by a two-arms high-efficiency spectrograph, able to cover the spectral range 350-2000 nanometer with a mean resolving power R$\approx$4500. While the purpose of the ETC is the estimate, to the best possible accuracy, of the Signal-to-Noise ratio (SNR), the E2E model allows us to simulate the propagation of photons, starting from the scientific target of interest, up to the detectors. We detail the ETC and E2E architectures, computational models and functionalities. The interface of the E2E with external simulation modules and with the pipeline are described, too. Synthetic spectral formats, related to different seeing and observing conditions, and calibration frames to be ingested by the pipeline are also presented.

astro-ph.IM↗

arXiv2022

The vacuum and cryogenics system of the SOXS spectrograph

SOXS (Son Of X-Shooter) is a single object spectrograph built by an international consortium for the ESO NTT telescope. SOXS is based on the heritage of the X-Shooter at the ESO-VLT with two arms (UV-VIS and NIR) working in parallel, with a Resolution-Slit product of about 4500, capable of simultaneously observing over the entire band the complete spectral range from the U- to the H-band. SOXS will carry out rapid and long-term Target of Opportunity requests on a variety of astronomical objects. The SOXS vacuum and cryogenic control system has been designed to evacuate, cool down and maintain the UV-VIS detector and the entire NIR spectrograph to their operating temperatures. The design chosen allows the two arms to be operated independently. This paper describes the final design of the cryo-vacuum control system, its functionalities and the tests performed in the integration laboratories.

astro-ph.IM↗

arXiv2022

Progress on the SOXS transients chaser for the ESO-NTT

SOXS (Son Of X-Shooter) is a single object spectrograph offering a simultaneous spectral coverage from U- to H-band, built by an international consortium for the 3.58-m ESO New Technology Telescope at the La Silla Observatory. It is designed to observe all kind of transients and variable sources discovered by different surveys with a highly flexible schedule maintained by the consortium, based on the Target of Opportunity concept. SOXS is going to be a fundamental spectroscopic partner for any kind of imaging survey, becoming one of the premier transient follow-up instruments in the Southern hemisphere. This paper gives an updated status of the project, when the instrument is in the advanced phase of integration and testing in Europe, prior to the activities in Chile.

astro-ph.IM↗

arXiv2022

The internal alignment and validation of a powered ADC for SOXS

The Son Of X-Shooter (SOXS) is a two-channel spectrograph along with imaging capabilities, characterized by a wide spectral coverage (350nm to 2000nm), designed for the NTT telescope at the La Silla Observatory. Its main scientific goal is the spectroscopic follow-up of transients and variable objects. The UV-VIS arm, of the Common Path sub-system, is characterized by the presence of a powered Atmospheric Dispersion Corrector composed (ADC) by two counter-rotating quadruplets, two prisms, and two lenses each. The presence of powered optics in both the optical groups represents an additional challenge in the alignment procedures. We present the characteristics of the ADC, the analysis after receiving the optics from the manufacturer, the emerging issues, the alignment strategies we followed, and the final results of the ADC in dispersion and optical quality.

astro-ph.IM↗

arXiv2022

SOXS mechanical integration and verification in Italy

SOXS (SOn of X-Shooter) is a medium resolution (~4500) wide-band (0.35 - 2.0 μm) spectrograph which passed the Final Design Review in 2018. The instrument is in the final integration phase and it is planned to be installed at the NTT in La Silla by next year. It is mainly composed of five different optomechanical subsystems (Common Path, NIR spectrograph, UV-VIS spectrograph, Camera, and Calibration) and other mechanical subsystems (Interface flange, Platform, cable corotator, and cooling system). A brief overview of the optomechanical subsystems is presented here as more details can be found in the specific proceedings while a more comprehensive discussion is dedicated to the other mechanical subsystems and the tools needed for the integration of the instrument. Moreover, the results obtained during the acceptance of the various mechanical elements are presented together with the experiments performed to validate the functionality of the subsystems. Finally, the mechanical integration procedure is shown here, along with all the modifications applied to correct the typical problems happening in this phase.

astro-ph.IM↗