Searcharxiv⌕ Search

arXiv subjects

S. Smith

Publications and source records attributed to S. Smith.

At least 19 recordsLinked to original sources
arXiv2025

Gamma-Ray and AntiMatter Survey(GRAMS) experiment

The Gamma-Ray and AntiMatter Survey (GRAMS) is a next-generation experiment using a Liquid Argon Time Projection Chamber (LArTPC) detector to measure MeV gamma rays and antiparticles. MeV gamma-ray observations are important for understanding multi-messenger and time-domain astronomy, enabling exploration of the universe's most potent events, such as supernovae and neutron star mergers. Despite the significance of MeV gamma-rays, GRAMS could also explore the so-called 'MeV gap' region to improve MeV gamma-ray measurement sensitivity that was restricted by the challenge of accurately reconstructing Compton events. Aside from gamma-ray detection, the GRAMS proposed method also serves as an antiparticle spectrometer, targeting the low-energy range of cosmic antinuclei measurements. This work will provide updates on the current status and progress towards the prototype balloon flight with a small-scale LArTPC (pGRAMS) scheduled for early 2026, as well as the recent progress on antihelium-3 sensitivity calculation.

hep-ex↗
arXiv2025

Adaptive Task Space Non-Singular Terminal Super-Twisting Sliding Mode Control of a 7-DOF Robotic Manipulator

This paper presents a new task-space Non-singular Terminal Super-Twisting Sliding Mode (NT-STSM) controller with adaptive gains for robust trajectory tracking of a 7-DOF robotic manipulator. The proposed approach addresses the challenges of chattering, unknown disturbances, and rotational motion tracking, making it suited for high-DOF manipulators in dexterous manipulation tasks. A rigorous boundedness proof is provided, offering gain selection guidelines for practical implementation. Simulations and hardware experiments with external disturbances demonstrate the proposed controller's robust, accurate tracking with reduced control effort under unknown disturbances compared to other NT-STSM and conventional controllers. The results demonstrated that the proposed NT-STSM controller mitigates chattering and instability in complex motions, making it a viable solution for dexterous robotic manipulations and various industrial applications.

eess.SY↗
arXiv2025

Antihelium-3 Sensitivity for the GRAMS Experiment

The Gamma-Ray and AntiMatter Survey (GRAMS) is a next-generation balloon/satellite mission utilizing a Liquid Argon Time Projection Chamber (LArTPC) detector to measure both MeV gamma rays and antinuclei produced by dark matter annihilation or decay. The GRAMS can identify antihelium-3 events based on the measurements of X-rays and charged pions from the decay of the exotic atoms, Time of Flight (TOF), energy deposition, and stopping range. This paper shows the antihelium-3 sensitivity estimation using a GEANT4 Monte Carlo simulation. For the proposed long-duration balloon (LDB) flight program (35 days $ \times $ 3 flights) and future satellite mission (2-year observation / 10-year observation), the sensitivities become 1.47 $\times$ 10$^{-7}$ [m$^2$ s sr GeV/n]$^{-1}$ and 1.55 $\times$ 10$^{-9}$ [m$^2$ s sr GeV/n]$^{-1}$ / $3.10\times10^{-10}$ [m$^2$ s sr GeV/n]$^{-1}$, respectively. The results indicate that GRAMS can extensively investigate various dark matter models through the antihelium-3 measurements.

hep-ex↗
arXiv2024

First operation of LArTPC in the stratosphere as an engineering GRAMS balloon flight (eGRAMS)

GRAMS (Gamma-Ray and AntiMatter Survey) is a next-generation balloon/satellite experiment utilizing a LArTPC (Liquid Argon Time Projection Chamber), to simultaneously target astrophysical observations of cosmic MeV gamma-rays and conduct an indirect dark matter search using antimatter. While LArTPCs are widely used in particle physics experiments, they have never been operated at balloon altitudes. An engineering balloon flight with a small-scale LArTPC (eGRAMS) was conducted on July 27th, 2023, to establish a system for safely operating a LArTPC at balloon altitudes and to obtain cosmic-ray data from the LArTPC. The flight was launched from the Japan Aerospace Exploration Agency's (JAXA) Taiki Aerospace Research Field in Hokkaido, Japan. The total flight duration was 3 hours and 12 minutes, including a level flight of 44 minutes at a maximum altitude of 28.9 km. The flight system was landed on the sea and successfully recovered. The LArTPC was successfully operated throughout the flight, and about 0.5 million events of the cosmic-ray data including muons, protons, and Compton scattering gamma-ray candidates, were collected. This pioneering flight demonstrates the feasibility of operating a LArTPC in high-altitude environments, paving the way for future GRAMS missions and advancing our capabilities in MeV gamma-ray astronomy and dark matter research.

astro-ph.IM↗
arXiv2022

ATHENA X-IFU Demonstration Model: First joint operation of the main TES Array and its Cryogenic AntiCoincidence Detector (CryoAC)

The X-IFU is the cryogenic spectrometer onboard the future ATHENA X-ray observatory. It is based on a large array of TES microcalorimeters, which works in combination with a Cryogenic AntiCoincidence detector (CryoAC). This is necessary to reduce the particle background level thus enabling part of the mission science goals. Here we present the first joint test of X-IFU TES array and CryoAC Demonstration Models, performed in a FDM setup. We show that it is possible to operate properly both detectors, and we provide a preliminary demonstration of the anti-coincidence capability of the system achieved by the simultaneous detection of cosmic muons.

astro-ph.IM↗
arXiv2021

Modeling of Particle Transport, Neutrals and Radiation in Magnetically-Confined Plasmas with Aurora

We present Aurora, an open-source package for particle transport, neutrals and radiation modeling in magnetic confinement fusion plasmas. Aurora's modern multi-language interface enables simulations of 1.5D impurity transport within high-performance computing frameworks, particularly for the inference of particle transport coefficients. A user-friendly Python library allows simple interaction with atomic rates from the Atomic Data and Atomic Structure database as well as other sources. This enables a range of radiation predictions, both for power balance and spectroscopic analysis. We discuss here the superstaging approximation for complex ions, as a way to group charge states and reduce computational cost, demonstrating its wide applicability within the Aurora forward model and beyond. Aurora also facilitates neutral particle analysis, both from experimental spectroscopic data and other simulation codes. Leveraging Aurora's capabilities to interface SOLPS-ITER results, we demonstrate that charge exchange is unlikely to affect the total radiated power from the ITER core during high performance operation. Finally, we describe the ImpRad module in the OMFIT framework, developed to enable experimental analysis and transport inferences on multiple devices using Aurora.

physics.plasm-ph↗
arXiv2020

The Laser-hybrid Accelerator for Radiobiological Applications

The `Laser-hybrid Accelerator for Radiobiological Applications', LhARA, is conceived as a novel, uniquely-flexible facility dedicated to the study of radiobiology. The technologies demonstrated in LhARA, which have wide application, will be developed to allow particle-beam therapy to be delivered in a completely new regime, combining a variety of ion species in a single treatment fraction and exploiting ultra-high dose rates. LhARA will be a hybrid accelerator system in which laser interactions drive the creation of a large flux of protons or light ions that are captured using a plasma (Gabor) lens and formed into a beam. The laser-driven source allows protons and ions to be captured at energies significantly above those that pertain in conventional facilities, thus evading the current space-charge limit on the instantaneous dose rate that can be delivered. The laser-hybrid approach, therefore, will allow the vast ``terra incognita'' of the radiobiology that determines the response of tissue to ionising radiation to be studied with protons and light ions using a wide variety of time structures, spectral distributions, and spatial configurations at instantaneous dose rates up to and significantly beyond the ultra-high dose-rate `FLASH' regime. It is proposed that LhARA be developed in two stages. In the first stage, a programme of in vitro radiobiology will be served with proton beams with energies between 10MeV and 15MeV. In stage two, the beam will be accelerated using a fixed-field accelerator (FFA). This will allow experiments to be carried out in vitro and in vivo with proton beam energies of up to 127MeV. In addition, ion beams with energies up to 33.4MeV per nucleon will be available for in vitro and in vivo experiments. This paper presents the conceptual design for LhARA and the R&D programme by which the LhARA consortium seeks to establish the facility.

physics.acc-ph↗
arXiv2019

Determining Individual Origin Similarity (DInOS): Binary Classification of Authors Using Stylometric Features

Author similarity and detection is an integral first step in detecting state-led disinformation campaigns in an automated fashion. Current detection techniques require an analyst or subject matter expert to hand-curate accounts. Stylometric features have a rich history in identifying authorship of unknown documents, but little exploration has been done to compare authors to one another. We have adapted a select handful of stylometric features for use in author similarity metrics, and show their >0.96 F-1 performance on a curated author classification task, across both traditional machine learning and deep learning models. These features should contribute to the expanding field of author similarity research, and expedite the process of detecting and mitigating large-scale social media disinformation campaigns.

cs.SI↗
arXiv2019

Automated Assignment of Backbone Resonances Using Residual Dipolar Couplings Acquired from a Protein with Known Structure

Resonance assignment is a critical first step in the investigation of protein structures using NMR spectroscopy. The development of assignment methods that require less experimental data is possible with prior knowledge of the macromolecular structure. Automated methods of performing the task of resonance assignment can significantly reduce the financial cost and time requirement for protein structure determination. Such methods can also be beneficial in validating a protein's solution state structure. Here we present a new approach to the assignment problem. Our approach uses only RDC data to assign backbone resonances. It provides simultaneous order tensor estimation and assignment. Our approach compares independent order tensor estimates to determine when the correct order tensor has been found. We demonstrate the algorithm's viability using simulated data from the protein domain 1A1Z.

q-bio.BM↗
arXiv2019

SLAC UED LLRF System Upgrade

The SLAC mega-electron-volt (MeV) ultrafast electron diffraction (UED) instrument is a powerful "electron camera" for the study of time-resolved, ultrafast atomic & molecular dynamics in chemical and solid-state systems. The UED laser timing synchronization is upgraded to SLAC (Advanced Telecommunications Computing Architecture) ATCA based femtosecond laser timing synchronization system. UED radio frequency (RF) gun cavity low level RF (LLRF) control is also being upgraded to SLAC ATCA based LLRF system to provide improved performance and maintainability. The new laser timing synchronization and LLRF control are implemented in one ATCA crate located in the laser room. A 2nd ATCA crate is set up to monitor the Klystron and sub-booster performance. With the ATCA based RF control system, the laser timing jitter has achieved 10 fs. The UED operation beam rate is being upgraded from 180 Hz to 360 Hz, which paves the way for a further upgrade of operation beam rate to 1 kHz in the future. In this paper, we present design details and characterization results of the implementation.

physics.acc-ph↗
arXiv2019

Increasing the Discovery Space in Astrophysics - A Collation of Six Submitted White Papers

We write in response to the call from the 2020 Decadal Survey to submit white papers illustrating the most pressing scientific questions in astrophysics for the coming decade. We propose exploration as the central question for the Decadal Committee's discussions.The history of astronomy shows that paradigm changing discoveries are not driven by well formulated scientific questions, based on the knowledge of the time. They were instead the result of the increase in discovery space fostered by new telescopes and instruments. An additional tool for increasing the discovery space is provided by the analysis and mining of the increasingly larger amount of archival data available to astronomers. Revolutionary observing facilities, and the state of the art astronomy archives needed to support these facilities, will open up the universe to new discovery. Here we focus on exploration for compact objects and multi messenger science. This white paper includes science examples of the power of the discovery approach, encompassing all the areas of astrophysics covered by the 2020 Decadal Survey.

astro-ph.GA↗
arXiv2018

HEP Software Foundation Community White Paper Working Group - Data and Software Preservation to Enable Reuse

In this chapter of the High Energy Physics Software Foundation Community Whitepaper, we discuss the current state of infrastructure, best practices, and ongoing developments in the area of data and software preservation in high energy physics. A re-framing of the motivation for preservation to enable re-use is presented. A series of research and development goals in software and other cyberinfrastructure that will aid in the enabling of reuse of particle physics analyses and production software are presented and discussed.

physics.comp-ph↗
arXiv2018

SLAC Microresonator Radio Frequency (SMuRF) Electronics for Read Out of Frequency-Division-Multiplexed Cryogenic Sensors

Large arrays of cryogenic sensors for various imaging applications ranging across x-ray, gamma-ray, Cosmic Microwave Background (CMB), mm/sub-mm, as well as particle detection increasingly rely on superconducting microresonators for high multiplexing factors. These microresonators take the form of microwave SQUIDs that couple to Transition-Edge Sensors (TES) or Microwave Kinetic Inductance Detectors (MKIDs). In principle, such arrays can be read out with vastly scalable software-defined radio using suitable FPGAs, ADCs and DACs. In this work, we share plans and show initial results for SLAC Microresonator Radio Frequency (SMuRF) electronics, a next-generation control and readout system for superconducting microresonators. SMuRF electronics are unique in their implementation of specialized algorithms for closed-loop tone tracking, which consists of fast feedback and feedforward to each resonator's excitation parameters based on transmission measurements. Closed-loop tone tracking enables improved system linearity, a significant increase in sensor count per readout line, and the possibility of overcoupled resonator designs for enhanced dynamic range. Low-bandwidth prototype electronics were used to demonstrate closed-loop tone tracking on twelve 300-kHz-wide microwave SQUID resonators, spaced at $\sim$6 MHz with center frequencies $\sim$5-6 GHz. We achieve multi-kHz tracking bandwidth and demonstrate that the noise floor of the electronics is subdominant to the noise intrinsic in the multiplexer.

astro-ph.IM↗
arXiv2017

PERLE: Powerful Energy Recovery Linac for Experiments - Conceptual Design Report

A conceptual design is presented of a novel ERL facility for the development and application of the energy recovery technique to linear electron accelerators in the multi-turn, large current and large energy regime. The main characteristics of the powerful energy recovery linac experiment facility (PERLE) are derived from the design of the Large Hadron electron Collider, an electron beam upgrade under study for the LHC, for which it would be the key demonstrator. PERLE is thus projected as a facility to investigate efficient, high current (> 10 mA) ERL operation with three re-circulation passages through newly designed SCRF cavities, at 801.58 MHz frequency, and following deceleration over another three re-circulations. In its fully equipped configuration, PERLE provides an electron beam of approximately 1 GeV energy. A physics programme possibly associated with PERLE is sketched, consisting of high precision elastic electron-proton scattering experiments, as well as photo-nuclear reactions of unprecedented intensities with up to 30 MeV photon beam energy as may be obtained using Fabry-Perot cavities. The facility has further applications as a general technology test bed that can investigate and validate novel superconducting magnets (beam induced quench tests) and superconducting RF structures (structure tests with high current beams, beam loading and transients). Besides a chapter on operation aspects, the report contains detailed considerations on the choices for the SCRF structure, optics and lattice design, solutions for arc magnets, source and injector and on further essential components. A suitable configuration derived from the here presented design concept may next be moved forward to a technical design and possibly be built by an international collaboration which is being established.

physics.acc-ph↗
arXiv2014

Technical Design Report EuroGammaS proposal for the ELI-NP Gamma beam System

The machine described in this document is an advanced Source of up to 20 MeV Gamma Rays based on Compton back-scattering, i.e. collision of an intense high power laser beam and a high brightness electron beam with maximum kinetic energy of about 720 MeV. Fully equipped with collimation and characterization systems, in order to generate, form and fully measure the physical characteristics of the produced Gamma Ray beam. The quality, i.e. phase space density, of the two colliding beams will be such that the emitted Gamma ray beam is characterized by energy tunability, spectral density, bandwidth, polarization, divergence and brilliance compatible with the requested performances of the ELI-NP user facility, to be built in Romania as the Nuclear Physics oriented Pillar of the European Extreme Light Infrastructure. This document illustrates the Technical Design finally produced by the EuroGammaS Collaboration, after a thorough investigation of the machine expected performances within the constraints imposed by the ELI-NP tender for the Gamma Beam System (ELI-NP-GBS), in terms of available budget, deadlines for machine completion and performance achievement, compatibility with lay-out and characteristics of the planned civil engineering.

physics.acc-ph↗
arXiv2013

The new radiation-hard optical links for the ATLAS pixel detector

The ATLAS detector is currently being upgraded with a new layer of pixel based charged particle tracking and a new arrangement of the services for the pixel detector. These upgrades require the replacement of the opto-boards previously used by the pixel detector. In this report we give details on the design and production of the new opto-boards.

physics.ins-det↗
arXiv2013

Accelerator system for the PRISM based muon to electron conversion experiment

The next generation of lepton flavor violation experiments need high intensity and high quality muon beams. Production of such beams requires sending a short, high intensity proton pulse to the pion production target, capturing pions and collecting the resulting muons in the large acceptance transport system. The substantial increase of beam quality can be obtained by applying the RF phase rotation on the muon beam in the dedicated FFAG ring, which was proposed for the PRISM project.This allows to reduce the momentum spread of the beam and to purify from the unwanted components like pions or secondary protons. A PRISM Task Force is addressing the accelerator and detector issues that need to be solved in order to realize the PRISM experiment. The parameters of the required proton beam, the principles of the PRISM experiment and the baseline FFAG design are introduced. The spectrum of alternative designs for the PRISM FFAG ring are shown. Progress on ring main systems like injection and RF are presented. The current status of the study and its future directions are discussed.

physics.acc-ph↗