Searcharxiv⌕ Search

arXiv subjects

S. Sree Harsha

Publications and source records attributed to S. Sree Harsha.

4 recordsLinked to original sources

Sign-switchable and tunable macroscopic curvature of liquid jets by microscopic laser-induced cavitation

Localized forcing of liquid jets can trigger Rayleigh-Plateau breakup at low perturbation amplitudes or explosive fragmentation at high amplitudes, while controlled bending in the intermediate regime has remained unexplored. We show that femtosecond-laser-induced cavitation, seeded at the interface of a 100 micrometre-diameter water jet, produces a selectable curvature in 0.4-1 mm long segments. Cavitation rupturing at the liquid-air interface drives fast outward jetting and induces a slower recoil on the opposite boundary, which evolves on the capillary-inertial timescale and results in curving of the liquid segment. The curvature is governed by three laser parameters. Off-axis laser illumination on the jet shifts the refractive caustics and redistributes energy deposition between the front and rear interfaces. The resulting recoil imbalance determines the curvature sign, with a straight configuration in the balanced case. Laser energy offers additional control over the recoil impulse via plasma defocusing and nonlinear absorption in the liquid jet, where the response is bounded by axisymmetric deformation at low energy and explosive vaporization at high energy. Repetition rate sets the spacing between successive cavitation events and hence the length of the bent segment. Curvature extends across the segment for lengths of 6-10 jet diameters; shorter segments undergo Rayleigh-Plateau breakup, whereas longer ones bend mainly near their retracting ends. Our results offer a platform for optofluidic control of switchable and tunable macroscopic curvature in flowing liquid jets.

physics.flu-dyn↗

Micrometer-thin liquid sheets from single-jet impact on a sharp edge for multi-kHz laser-plasma experiments

We present a simple and robust method for generating freely suspended liquid sheets by directing a single laminar liquid jet onto the sharp edge of an inclined plate. By optimizing liquid composition, impact geometry, and flow conditions, we identify a 60:40 ethylene-glycol-deionized-water volumetric mixture for stable sheet formation. The resulting sheets span 8 mm in height and 3 mm in width, with thicknesses from 1.1 to 4.8 micrometers measured by spatial and spectral interferometry. Operated in vacuum as continuously renewed plasma mirrors, these targets demonstrate stable performance from 0.5 to 10 kHz using 175-fs Yb:KGW laser pulses, reaching a maximum S-polarized reflectivity of 66.5% at an intensity of 4 x 10^14 W/cm^2. At higher intensities using 25-fs Ti:sapphire pulses at 1 kHz, maximum S-polarized reflectivity reaches 77% at 2 x 10^16 W/cm^2. The reflected beam exhibits high temporal stability, with angular pointing fluctuations of 18.19 +/- 0.53 microradians. Our results demonstrate a tunable, continuously renewed liquid-sheet target for multi-kHz laser-plasma experiments.

physics.plasm-ph↗

Femtosecond laser-induced cavitation seeds liquid-jet breakup beyond the Rayleigh-Plateau stability limit

The Rayleigh-Plateau instability predicts that infinitesimal perturbations of a liquid jet grow only for kR < 1, with kR = 1 marking the classical stability boundary. Here, we show that femtosecond-laser-induced cavitation generates a localized, impulsive recoil perturbation on a flowing liquid jet, enabling a two-dimensional map of jet breakup across the (kR, epsilon/R) plane. The perturbation's spacing (wavelength) and strength (amplitude) are set independently by the laser repetition rate and pulse energy, respectively. At low amplitudes, tuning the repetition rate recovers the classical Rayleigh-Plateau dispersion relation and its kR = 1 cutoff, while increasing the wavelength enables controlled generation of monodisperse droplet trains, bidisperse droplet populations, and ultimately isolated single droplets. Along the amplitude axis, low pulse energies produce a seed that amplifies only the imposed wavenumber, whereas above a critical energy Ec, the seed broadens to excite many wavenumbers simultaneously. At still higher amplitudes, we demonstrate deterministic breakup for kR > 1, extending to kR = 1.9, with laser-synchronized droplet production rates up to 0.2 MHz. These results establish localized femtosecond-laser-induced cavitation as a route to controlled Rayleigh-Plateau breakup both within and beyond the classical linear-stability boundary.

physics.flu-dyn↗

Caustic-Driven Fluidic Microlenses for Enhanced Nonlinear and High-Energy-Density Physics

We demonstrate that caustic microlensing occurring in a liquid jet efficiently drives linear, nonlinear, and high-energy-density phenomena. In the linear regime, caustics provide localized focusing, distinct from external high-NA optics. In the nonlinear regime, they enhance the input field at the liquid-air interface and boost surface-sensitive processes. In the high-energy-density domain, caustic-driven localized laser absorption generates gigapascal shocks using microjoule femtosecond pulses, with scalability up to repetition rates of 0.2 MHz. Caustic-driven fluidic microlensing offers opportunities for surface nonlinear optics, ultrafast science, and high-energy-density physics.

physics.optics↗