arXiv subjects

S. T. Maddison

Publications and source records attributed to S. T. Maddison.

At least 19 recordsLinked to original sources

arXiv2020

High-resolution survey for planetary companions to young stars in the Taurus Molecular Cloud

Direct imaging in the infrared at the diffraction limit of large telescopes is a unique probe of the properties of young planetary systems. We survey 55 single class I and class II stars in Taurus in the L' filter using natural and laser guide star adaptive optics and the near-infrared camera (NIRC2) of the Keck II telescope, in order to search for planetary mass companions. We use both reference star differential imaging and kernel phase techniques, achieving typical 5-sigma contrasts of ~6 magnitudes at separations of 0.2" and ~8 magnitudes beyond 0.5". Although we do not detect any new faint companions, we constrain the frequency of wide separation massive planets, such as HR 8799 analogues. We find that, assuming hot-start models and a planet distribution with power-law mass and semi-major axis indices of -0.5 and -1, respectively, less than 20% of our target stars host planets with masses >2 MJ at separations >10 AU.

astro-ph.EP↗

arXiv2017

New constraints on the millimetre emission of six debris disks

The presence of dusty debris around main sequence stars denotes the existence of planetary systems. Such debris disks are often identified by the presence of excess continuum emission at infrared and (sub-)millimetre wavelengths, with measurements at longer wavelengths tracing larger and cooler dust grains. The exponent of the slope of the disk emission at sub-millimetre wavelengths, `q', defines the size distribution of dust grains in the disk. This size distribution is a function of the rigid strength of the dust producing parent planetesimals. As part of the survey `PLAnetesimals around TYpical Pre-main seqUence Stars' (PLATYPUS) we observed six debris disks at 9-mm using the Australian Telescope Compact Array. We obtain marginal (~3-σ) detections of three targets: HD 105, HD 61005, and HD 131835. Upper limits for the three remaining disks, HD20807, HD109573, and HD109085, provide further constraint of the (sub-)millimetre slope of their spectral energy distributions. The values of q (or their limits) derived from our observations are all smaller than the oft-assumed steady state collisional cascade model (q = 3.5), but lie well within the theoretically expected range for debris disks q ~ 3 to 4. The measured q values for our targets are all < 3.3, consistent with both collisional modelling results and theoretical predictions for parent planetesimal bodies being `rubble piles' held together loosely by their self-gravity.

astro-ph.EP↗

arXiv2017

Radio Monitoring of Protoplanetary Discs

Protoplanetary disc systems observed at radio wavelengths often show excess emission above that expected from a simple extrapolation of thermal dust emission observed at short millimetre wavelengths. Monitoring the emission at radio wavelengths can be used to help disentangle the physical mechanisms responsible for this excess, including free-free emission from a wind or jet, and chromospheric emission associated with stellar activity. We present new results from a radio monitoring survey conducted with Australia Telescope Compact Array over the course of several years with observation intervals spanning days, months and years, where the flux variability of 11 T Tauri stars in the Chamaeleon and Lupus star forming regions was measured at 7 and 15 mm and 3 and 6 cm. Results show that for most sources are variable to some degree at 7 mm, indicating the presence of emission mechanisms other than thermal dust in some sources. Additionally, evidence of grain growth to cm-sized pebbles was found for some sources that also have signs of variable flux at 7 mm. We conclude that multiple processes contributing to the emission are common in T Tauri stars at 7 mm and beyond, and that a detection at a single epoch at radio wavelengths should not be used to determine all processes contributing to the emission.

astro-ph.EP↗

arXiv2016

Numerical search for a potential planet sculpting the young disc of HD 115600

Radial and azimuthal features (such as disc offsets and eccentric rings) seen in high resolution images of debris discs, provide us with the unique opportunity of finding potential planetary companions which betray their presence by gravitationally sculpting such asymmetric features. The young debris disc around HD 115600, imaged recently by the Gemini Planet Imager, is such a disc with an eccentricity 0.1<e<0.2 and a projected offset from the star of 4 AU. Using our modified N-body code which incorporates radiation forces, we firstly aim to determine the orbit of a hidden planetary companion potentially responsible for shaping the disc. We run a suite of simulations covering a broad range of planetary parameters using a Monte Carlo Markov Chain sampling method and create synthetic images from which we extract the geometric disc parameters to be compared with the observed and model-derived quantities. We then repeat the study using a traditional grid to explore the planetary parameter space and aim secondly to compare the efficiency of both sampling methods. We find a planet of 7.8 Jupiter mass orbiting at 30 AU with an eccentricity of e = 0.2 to be the best fit to the observations of HD 115600. Technically, such planet has a contrast detectable by direct imaging, however the system's orientation does not favour such detection. In this study, at equal number of explored planetary configurations, the Monte Carlo Markov Chain not only converges faster but provides a better fit than a traditional grid.

astro-ph.EP↗

arXiv2016

A cavity and further radial substructures in the disk around HD~97048

Context: Gaps, cavities and rings in circumstellar disks are signposts of disk evolution and planet-disk interactions. We follow the recent suggestion that Herbig Ae/Be disks with a flared disk harbour a cavity, and investigate the disk around HD~97048. Aims: We aim to resolve the 34$\pm$ 4 au central cavity predicted by Maaskant et al. (2013) and to investigate the structure of the disk. Methods: We image the disk around HD~97048 using ALMA at 0.85~mm and 2.94~mm, and ATCA (multiple frequencies) observations. Our observations also include the 12CO J=1-0, 12CO J=3-2 and HCO+ J=4-3 emission lines. Results: A central cavity in the disk around HD~97048 is resolved with a 40-46 au radius. Additional radial structure present in the surface brightness profile can be accounted for either by an opacity gap at ~90 au or by an extra emitting ring at ~150 au. The continuum emission tracing the dust in the disk is detected out to 355 au. The 12CO J=3-2 disk is detected 2.4 times farther out. The 12CO emission can be traced down to $\approx$ 10 au scales. Non-Keplerian kinematics are detected inside the cavity via the HCO+ J=4-3 velocity map. The mm spectral index measured from ATCA observations suggests that grain growth has occurred in the HD~97048 disk. Finally, we resolve a highly inclined disk out to 150 au around the nearby 0.5~$M_{\odot}$ binary ISO-ChaI 126. Conclusions: The data presented here reveal a cavity in the disk of HD 97048, and prominent radial structure in the surface brightness. The cavity size varies for different continuum frequencies and gas tracers. The gas inside the cavity follows non-Keplerian kinematics seen in HCO+ emission. The variable cavity size along with the kinematical signature suggests the presence of a substellar companion or massive planet inside the cavity.

astro-ph.SR↗

arXiv2016

Numerical predictions for planets in the debris discs of HD 202628 and HD 207129

Resolved debris disc images can exhibit a range of radial and azimuthal structures, including gaps and rings, which can result from planetary companions shaping the disc by their gravitational influence. Currently there are no tools available to determine the architecture of potential companions from disc observations. Recent work by Rodigas et al. (2014) presents how one can estimate the maximum mass and minimum semi major axis of a hidden planet empirically from the width of the disc in scattered light. In this work, we use the predictions of Rodigas et al. applied to two debris discs HD 202628 and HD 207129. We aim to test if the predicted orbits of the planets can explain the features of their debris disc, such as eccentricity and sharp inner edge. We first run dynamical simulations using the predicted planetary parameters of Rodigas et al., and then numerically search for better parameters. Using a modified N-body code including radiation forces, we perform simulations over a broad range of planet parameters and compare synthetics images from our simulations to the observations. We find that the observational features of HD 202628 can be reproduced with a planet five times smaller than expected, located 30 AU beyond the predicted value, while the best match for HD 207129 is for a planet located 5-10 AU beyond the predicted location with a smaller eccentricity. We conclude that the predictions of Rodigas et al. provide a good starting point but should be complemented by numerical simulations.

astro-ph.EP↗

arXiv2015

An ATCA survey of debris disks at 7 millimeters

We present ATCA continuum observations at a wavelength of 6.8 mm of five debris disks: $β$ Pictoris, q$^1$ Eridani, HD 107146, HD 181327, and HD 95086. These observations provide the detection at the longest wavelengths obtained to date for all these debris disks. By combining our 6.8 mm data with previous detections at shorter sub-millimeter/millimeter wavelengths we measure the long wavelength spectral index of these sources. We then use previous estimates for the temperature of the emitting dust to derive the spectral index of the dust emissivity. Under the assumption that all the detected flux comes from dust only, we constrain the slope of the solid size distribution, assumed to be a power-law. The values that we infer for the slope of the size distribution range between about 3.36 and 3.50. We compare our findings with the case of the Fomalhaut debris disk and use these results to test the predictions of collisional cascades of planetesimal belts.

astro-ph.EP↗

arXiv2015

Compact dust concentration in the MWC 758 protoplanetary disk

The formation of planetesimals requires that primordial dust grains grow from micron- to km-sized bodies. Dust traps caused by gas pressure maxima have been proposed as regions where grains can concentrate and grow fast enough to form planetesimals, before radially migrating onto the star. We report new VLA Ka & Ku observations of the protoplanetary disk around the Herbig Ae/Be star MWC 758. The Ka image shows a compact emission region in the outer disk indicating a strong concentration of big dust grains. Tracing smaller grains, archival ALMA data in band 7 continuum shows extended disk emission with an intensity maximum to the north-west of the central star, which matches the VLA clump position. The compactness of the Ka emission is expected in the context of dust trapping, as big grains are trapped more easily than smaller grains in gas pressure maxima. We develop a non-axisymmetric parametric model inspired by a steady state vortex solution with parameters adequately selected to reproduce the observations, including the spectral energy distribution. Finally, we compare the radio continuum with SPHERE scattered light data. The ALMA continuum spatially coincides with a spiral-like feature seen in scattered light, while the VLA clump is offset from the scattered light maximum. Moreover, the ALMA map shows a decrement that matches a region devoid of scattered polarised emission. Continuum observations at a different wavelength are necessary to conclude if the VLA-ALMA difference is an opacity or a real dust segregation.

astro-ph.EP↗

arXiv2015

The impact of initial conditions in N-body simulations of debris discs

Numerical simulations are a crucial tool to understand the relationship between debris discs and planetary companions. However, simulations throughout the literature have been conducted with various initial conditions often with little or no justification. In this paper, we aim to study the dependence on the initial conditions of N-body simulations modelling the interaction between a massive and eccentric planet on an exterior debris disc. To achieve this, we first classify three broad approaches used in the literature and provide some physical context for when each category should be used. We then run a series of N-body simulations, that include radiation forces acting on small grains, with varying initial conditions across the three categories. We test the influence of the initial parent body belt width, eccentricity, and alignment with the planet on the resulting debris disc structure and compare the final peak emission location, disc width and offset of synthetic disc images produced with a radiative transfer code. We also track the evolution of the forced eccentricity of the dust grains induced by the planet, as well as resonance dust trapping. We find that an initially broad parent body belt always results in a broader debris disc than an initially narrow parent body belt. While simulations with a parent body belt with low initial eccentricity (e ~ 0) and high initial eccentricity (0 < e < 0.3) resulted in similar broad discs, we find that purely secular forced initial conditions, where the initial disc eccentricity is set to the forced value and the disc is aligned with the planet, always result in a narrower disc. We conclude that broad debris discs can be modelled by using either a dynamically cold or dynamically warm parent belt, while in contrast eccentric narrow debris rings are reproduced using a secularly forced parent body belt.

astro-ph.EP↗

arXiv2015

The accumulation and trapping of grains at planet gaps: effects of grain growth and fragmentation

We model the dust evolution in protoplanetary disks with full 3D, Smoothed Particle Hydrodynamics (SPH), two-phase (gas+dust) hydrodynamical simulations. The gas+dust dynamics, where aerodynamic drag leads to the vertical settling and radial migration of grains, is consistently treated. In a previous work, we characterized the spatial distribution of non-growing dust grains of different sizes in a disk containing a gap-opening planet and investigated the gap's detectability with the Atacama Large Millimeter/submillimeter Array (ALMA). Here we take into account the effects of grain growth and fragmentation and study their impact on the distribution of solids in the disk. We show that rapid grain growth in the two accumulation zones around planet gaps is strongly affected by fragmentation. We discuss the consequences for ALMA observations.

astro-ph.EP↗

arXiv2014

A dynamical test for terrestrial planets in the habitable zone of HD 204313

With improvements in exoplanet detection techniques, the number of multiple planet systems discovered is increasing, while the detection of potentially habitable Earth-mass planets remains complicated and thus requires new search strategies. Dynamical studies of known multiple planet systems are therefore a vital tool in the search for stable and habitable planet candidates. Here, we present a dynamical study of the three-planet system HD 204313 to determine whether it could harbour an Earth-like planet within its habitable zone for a sufficient time to develop life. We found two semi-stable regions in the system, but neither prove stable for long enough for a terrestrial planet to develop life. Our investigations suggest that overlapping weak and high order resonances may be responsible for these semi-stable regions. This study established a framework for a larger project that will study the dynamical stability of the habitable zone of multiple planet systems, providing a list of interesting targets for future habitable low-mass planet searches.

astro-ph.EP↗

arXiv2013

Tidal stability of giant molecular clouds in the Large Magellanic Cloud

Star formation does not occur until the onset of gravitational collapse inside giant molecular clouds. However, the conditions that initiate cloud collapse and regulate the star formation process remain poorly understood. Local processes such as turbulence and magnetic fields can act to promote or prevent collapse. On larger scales, the galactic potential can also influence cloud stability and is traditionally assessed by the tidal and shear effects. In this paper, we examine the stability of giant molecular clouds (GMCs) in the Large Magellanic Cloud (LMC) against shear and the galactic tide using CO data from the Magellanic Mopra Assessment (MAGMA) and rotation curve data from the literature. We calculate the tidal acceleration experienced by individual GMCs and determine the minimum cloud mass required for tidal stability. We also calculate the shear parameter, which is a measure of a clouds susceptibility to disruption via shearing forces in the galactic disk. We examine whether there are correlations between the properties and star forming activity of GMCs and their stability against shear and tidal disruption. We find that the GMCs are in approximate tidal balance in the LMC, and that shear is unlikely to affect their further evolution. GMCs with masses close to the minimal stable mass against tidal disruption are not unusual in terms of their mass, location, or CO brightness, but we note that GMCs with large velocity dispersion tend to be more sensitive to tidal instability. We also note that GMCs with smaller radii, which represent the majority of our sample, tend to more strongly resist tidal and shear disruption. Our results demonstrate that star formation in the LMC is not inhibited by to tidal or shear instability.

astro-ph.GA↗

arXiv2012

Planet gaps in the dust layer of 3D protoplanetary disks. II. Observability with ALMA

[Abridged] Aims: We provide predictions for ALMA observations of planet gaps that account for the specific spatial distribution of dust that results from consistent gas+dust dynamics. Methods: In a previous work, we ran full 3D, two-fluid Smoothed Particle Hydrodynamics (SPH) simulations of a planet embedded in a gas+dust T Tauri disk for different planet masses and grain sizes. In this work, the resulting dust distributions are passed to the Monte Carlo radiative transfer code MCFOST to construct synthetic images in the ALMA wavebands. We then use the ALMA simulator to produce images that include thermal and phase noise for a range of angular resolutions, wavelengths, and integration times, as well as for different inclinations, declinations and distances. We also produce images which assume that gas and dust are well mixed with a gas-to-dust ratio of 100 to compare with previous ALMA predictions, all made under this hypothesis. Results: Our findings clearly demonstrate the importance of correctly incorporating the dust dynamics. We show that the gap carved by a 1 M_J planet orbiting at 40 AU is visible with a much higher contrast than the well-mixed assumption would predict. In the case of a 5 M_J planet, we clearly see a deficit in dust emission in the inner disk, and point out the risk of interpreting the resulting image as that of a transition disk with an inner hole if observed in unfavorable conditions. Planet signatures are fainter in more distant disks but declination or inclination to the line-of-sight have little effect on ALMA's ability to resolve the gaps. Conclusions: ALMA has the potential to see signposts of planets in disks of nearby star-forming regions. We present optimized observing parameters to detect them in the case of 1 and 5 M_J planets on 40 AU orbits.

astro-ph.EP↗

arXiv2012

Fomalhaut debris disk emission at 7 millimeters: constraints on the collisional models of planetesimals

We present new spatially resolved observations of the dust thermal emission at 7 mm from the Fomalhaut debris disk obtained with the Australia Telescope Compact Array. These observations provide the longest wavelength detection of the Fomalhaut debris disk to date. We combined the new data to literature sub-mm data to investigate the spectral index of the dust thermal emission in the sub-millimeter and constrained the $q$-slope of the power-law grain size distribution. We derived a value for $q = 3.48 \pm 0.14$ for grains with sizes around 1 mm. This is consistent with the classical prediction for a collisional cascade at the steady-state. The same value cannot be explained by more recent collisional models of planetesimals in which either the velocity distribution of the large bodies or their tensile strength is a strong function of the body size.

astro-ph.GA↗

arXiv2011

An icy Kuiper-Belt around the young solar-type star HD 181327

HD 181327 is a young F5/F6V star belonging to the Beta Pictoris moving group (12 Myr). It harbors an optically thin belt of circumstellar material at 90 AU. We aim to study the dust properties in the belt in details, and to constrain the gas-to-dust ratio. We obtained far-IR observations with the Herschel/PACS instrument, and 3.2 mm observations with the ATCA array. The geometry of the belt is constrained with newly reduced HST/NICMOS images that break the degeneracy between the disk geometry and the dust properties. We use the radiative transfer code GRaTer to compute a large grid of models, and we identify the grain models that best reproduce the Spectral Energy Distribution through a Bayesian analysis. We attempt to detect the [OI] and [CII] lines with PACS spectroscopy, providing observables to our photochemical code ProDiMo. The HST observations confirm that the dust is confined in a narrow belt. The continuum is detected in the far-IR with PACS and the disk is resolved with both PACS and ATCA. A medium integration of the gas spectral lines only provides upper limits on the line fluxes. We show that the HD 181327 dust disk consists of micron-sized grains of porous amorphous silicates and carbonaceous material surrounded by an important layer of ice, for a total dust mass of 0.05 M\oplus (up to 1 mm). We discuss evidences that the grains are fluffy aggregates. The upper limits on the gas lines do not provide unambiguous constraints: only if the PAH abundance is high, the gas mass must be lower than 17 M\oplus. Despite the weak constraints on the gas disk, the age of HD 181327 and the properties of the dust disk suggest that it has passed the stage of gaseous planets formation. The dust reveals a population of icy planetesimals, similar to the primitive Kuiper Belt, that may be a source for the future delivery of water and volatiles onto forming terrestrial planets.

astro-ph.EP↗

arXiv2011

Microwave Observations of Edge-on Protoplanetary Disks: Program Overview and First Results

We are undertaking a multi-frequency Expanded Very Large Array (EVLA) survey of edge-on protoplanetary disks to probe the growth of solids in each disk, sedimentation of such material into the disk midplane, and the connection of these phenomena to the planet formation process. The projection of edge-on disk systems along our line of sight enables a study of the vertical stratification of large grains with fewer model dependencies than would be required for disks that are more face-on. Robust studies of the spatial distribution of grains up to ~1 cm in size are possible with the wavelength range and sensitivity of the EVLA. In this contribution we describe target selection and observational strategies. First results concerning the Class 0 source IRAS04368+2557 (L1527 IRS) are presented, including a study of this source's 8.46 GHz continuum variability over short and long time baselines and an indication that its protoplanetary disk may have a dearth of pebble-sized grains.

astro-ph.SR↗

arXiv2011

The Australia Telescope Compact Array Broadband Backend (CABB)

Here we describe the Compact Array Broadband Backend (CABB) and present first results obtained with the upgraded Australia Telescope Compact Array (ATCA). The 16-fold increase in observing bandwidth, from 2 x 128 MHz to 2 x 2048 MHz, high bit sampling, and addition of 16 zoom windows (each divided into a further 2048 channels) provide major improvements for all ATCA observations. The benefits of the new system are: (1) hugely increased radio continuum and polarization sensitivity as well as image fidelity, (2) substantially improved capability to search for and map emission and absorption lines over large velocity ranges, (3) simultaneous multi-line and continuum observations, (4) increased sensitivity, survey speed and dynamic range due to high-bit sampling, and (5) high velocity resolution, while maintaining full polarization output. The new CABB system encourages all observers to make use of both spectral line and continuum data to achieve their full potential. Given the dramatic increase of the ATCA capabilities in all bands (ranging from 1.1 to 105 GHz) CABB enables scientific projects that were not feasible before the upgrade, such as simultaneous observations of multiple spectral lines, on-the-fly mapping, fast follow-up of radio transients (e.g., the radio afterglow of new supernovae) and maser observations at high velocity resolution and full polarization. The first science results presented here include wide-band spectra, high dynamic-range images, and polarization measurements, highlighting the increased capability and discovery potential of the ATCA.

astro-ph.IM↗

arXiv2007

The effect of a planet on the dust distribution in a 3D protoplanetary disk

Aims: We investigate the behaviour of dust in protoplanetary disks under the action of gas drag in the presence of a planet. Our goal is twofold: to determine the spatial distribution of dust depending on grain size and planet mass, and therefore to provide a framework for interpretation of coming observations and future studies of planetesimal growth. Method: We numerically model the evolution of dust in a protoplanetary disk using a two-fluid (gas + dust) Smoothed Particle Hydrodynamics (SPH) code, which is non-self-gravitating and locally isothermal. The code follows the three dimensional distribution of dust in a protoplanetary disk as it interacts with the gas via aerodynamic drag. In this work, we present the evolution of a minimum mass solar nebula (MMSN) disk comprising 1% dust by mass in the presence of an embedded planet. We run a series of simulations which vary the grain size and planetary mass to see how they affect the resulting disk structure. Results: We find that gap formation is much more rapid and striking in the dust layer than in the gaseous disk and that a system with a given stellar, disk and planetary mass will have a completely different appearance depending on the grain size. For low mass planets in our MMSN disk, a gap can open in the dust disk while not in the gas disk. We also note that dust accumulates at the external edge of the planetary gap and speculate that the presence of a planet in the disk may enhance the formation of a second planet by facilitating the growth of planetesimals in this high density region.

astro-ph↗