arXiv subjects

S. Wen

Publications and source records attributed to S. Wen.

18 recordsLinked to original sources

arXiv2025

The intermediate-mass black hole 2XMM J123103.2+110648: a varying disc accretion rate during possible X-ray quasi-periodic eruptions?

We fit the evolving X-ray spectra of the variable and fading source 2XMM J123103.2+110648 (J1231), which is an intermediate-mass black hole (IMBH) candidate. Recent X-ray timing studies have proposed that J1231's quasi-periodic oscillation (QPO) observed at the peak of its X-ray lightcurve is a variant of the quasi-periodic eruptions (QPEs) observed in other sources. Here, we fit X-ray spectra from XMM-Newton, Swift, and Chandra using a slim disc model for the black hole's accretion disc, obtaining a best-fit black hole mass of ($6\pm3)\times10^{4}$ $M_\odot$ and spin of $>0.6$ at 2$\sigma$ confidence. This mass is consistent with past estimates, supporting the IMBH interpretation, and the spin measurement is new. Yet the nature of J1231 remains uncertain: its long-term variability (decade-long continuum evolution) could signal a tidal disruption event or active galactic nuclear variability. We find that the spectral evolution within the first three years after the source's detection can be well explained by either a varying disc accretion rate $\dot m$ or a varying disc inclination $\theta$. Meanwhile, we find that during the short-term variability (the QPO with a ~3.8hr period), each oscillation does not show the "hard-rise-soft-decay" typical of QPEs. We fit the average spectrum at the QPO lightcurve maxima and the average spectrum at its minima, finding that the spectral difference is well explained by $\dot m$ decreasing from peaks to valleys if $\theta<30^{\circ}$ and constant between all data epochs. This result suggests that the short-term QPO behaviour might also be driven by a varying disc $\dot m$.

astro-ph.HE↗

arXiv2024

Slim disk modeling reveals an accreting intermediate-mass black hole in the luminous fast blue optical transient AT2018cow

The origin of the most luminous subclass of the fast blue optical transients (LFBOTs) is still unknown. We present an X-ray spectral analysis of AT2018cow-the LFBOT archetype-using NuSTAR, Swift, and XMM-Newton data. The source spectrum can be explained by the presence of a slim accretion disk, and we find that the mass accretion rate decreases to sub-Eddington levels >~ 200 days after the source's discovery. Applying our slim disk model to data obtained at multiple observational epochs, we constrain the mass of the central compact object in AT2018cow to be log(M_BH/Msun)=2.4+0.6/-0.1 at the 68% confidence level. Our mass measurement is independent from, but consistent with, the results from previously employed methods. The mass constraint is consistent with both the tidal disruption and the black hole-star merger scenarios, if the latter model can be extrapolated to the measured black hole mass. Our work provides evidence for an accreting intermediate-mass black hole (10^2--10^6 Msun) as the central engine in AT2018cow, and, by extension, in LFBOT sources similar to AT2018cow.

astro-ph.HE↗

arXiv2024

In-Flight Performance of Spider's 280 GHz Receivers

SPIDER is a balloon-borne instrument designed to map the cosmic microwave background at degree-angular scales in the presence of Galactic foregrounds. SPIDER has mapped a large sky area in the Southern Hemisphere using more than 2000 transition-edge sensors (TESs) during two NASA Long Duration Balloon flights above the Antarctic continent. During its first flight in January 2015, SPIDER observed in the 95 GHz and 150 GHz frequency bands, setting constraints on the B-mode signature of primordial gravitational waves. Its second flight in the 2022-2023 season added new receivers at 280 GHz, each using an array of TESs coupled to the sky through feedhorns formed from stacks of silicon wafers. These receivers are optimized to produce deep maps of polarized Galactic dust emission over a large sky area, providing a unique data set with lasting value to the field. We describe the instrument's performance during SPIDER's second flight, focusing on the performance of the 280 GHz receivers. We include details on the flight, in-band optical loading at float, and an early analysis of detector noise.

astro-ph.IM↗

arXiv2024

Tidal disruption event AT2020ocn: early-time X-ray flares caused by a possible disc alignment process

A tidal disruption event (TDE) may occur when a star is torn apart by the tidal force of a black hole (BH). Eventually, an accretion disc is thought to form out of stellar debris falling back towards the BH. If the star's orbital angular momentum vector prior to disruption is not aligned with the BH spin angular momentum vector, the disc will be tilted with respect to the BH equatorial plane. The disc will eventually be drawn into the BH equatorial plane due to a combination of the Bardeen-Petterson effect and internal torques. Here, we analyse the X-ray and UV observations of the TDE AT2020ocn obtained by Swift, XMM-Newton, and NICER. The X-ray light curve shows strong flares during the first $\approx100$ days, while, over the same period, the UV emission decays gradually. We find that the X-ray flares can be explained by a model that also explains the spectral evolution. This model includes a slim disc viewed under a variable inclination plus an inverse-Comptonisation component processing the slim disc emission. A scenario where the ongoing Lense-Thirring precession during the disc alignment process is responsible for the observed inclination variations is consistent with the data. In later observations, we find that the X-ray spectrum of AT2020ocn becomes harder, while the mass accretion rate remains at super-Eddington levels, suggesting the formation of a corona in line with accretion onto other compact objects. We constrain the BH mass to be $(7^{+13}_{-3})\times10^{5}$ M$_\odot$ at the 1$\sigma$ (68%) confidence level.

astro-ph.HE↗

arXiv2024

AT2018fyk: Candidate Tidal Disruption Event by a (Super)massive Black Hole Binary

The tidal disruption event (TDE) AT2018fyk has unusual X-ray, UV, and optical light curves that decay over the first $\sim$600d, rebrighten, and decay again around 1200d. We explain this behavior as a one-off TDE associated with a massive black hole (BH) \emph{binary}. The sharp drop-offs from $t^{-5/3}$ power laws at around 600d naturally arise when one BH interrupts the debris fallback onto the other BH. The BH mass $M_\bullet$ derived from fitting X-ray spectra with a slim disk accretion model and, independently, from fitting the early UV/optical light curves, is smaller by two orders of magnitude than predicted from the $M_\bullet$--$\sigma_*$ host galaxy relation, suggesting that the debris is accreted onto the secondary, with fallback cut off by the primary. Furthermore, if the rebrightening were associated with the primary, it should occur around 5000d, not the observed 1200d. The secondary's mass and dimensionless spin is $M_{\bullet,{\rm s}}=2.7^{+0.5}_{-1.5} \times 10^5 M_\odot$ and $a_{\bullet,{\rm s}}>0.3$ (X-ray spectral fitting), while the primary's mass is $M_{\bullet,{\rm p}}=10^{7.7\pm0.4}M_\odot$ ($M_\bullet$-$\sigma_*$ relation). An intermediate mass BH secondary is consistent with the observed UV/optical light curve decay, i.e., the secondary's outer accretion disk is too faint to produce a detectable emission floor. The time of the first accretion cutoff constrains the binary separation to be $(6.7\pm 1.2) \times 10^{-3}~{\rm pc}$. X-ray spectral fitting and timing analysis indicate that the hard X-rays arise from a corona above the secondary's disk. The early UV/optical emission, suggesting a super-Eddington phase for the secondary, possibly originates from shocks arising from debris circularization.

astro-ph.HE↗

arXiv2023

XMM-Newton-discovered Fast X-ray Transients: Host galaxies and limits on contemporaneous detections of optical counterparts

Extragalactic fast X-ray transients (FXTs) are a class of soft (0.3-10 keV) X-ray transients lasting a few hundred seconds to several hours. Several progenitor mechanisms have been suggested to produce FXTs, including supernova shock breakouts, binary neutron star mergers, or tidal disruptions involving an intermediate-mass black hole and a white dwarf. We present detailed host studies, including spectroscopic observations of the host galaxies of 7 XMM-Newton-discovered FXTs. The candidate hosts lie at redshifts 0.0928 $< z <$ 0.645 implying peak X-ray luminosities of 10$^{43}$ erg s$^{-1}$ $< L_X <$ 10$^{45}$ erg s$^{-1}$,and physical offsets of 1 kpc < $r_\mathrm{proj}$ < 22 kpc. These observations increase the number of FXTs with a spectroscopic redshift measurement by a factor of 2, although we note that one event is re-identified as a Galactic flare star. We infer host star formation rates and stellar masses by fitting the combined spectroscopic and archival photometric data. We also report on a contemporaneous optical counterpart search to the FXTs in Pan-STARRS and ATLAS by performing forced photometry at the position of the FXTs. We do not find any counterpart in our search. Given our constraints, including peak X-ray luminosities, optical limits, and host properties, we find that XRT 110621 is consistent with a SN SBO event. Spectroscopic redshifts of likely host galaxies for four events imply peak X-ray luminosities that are too high to be consistent with SN SBOs, but we are unable to discard either the BNS or WD-IMBH TDE scenarios for these FXTs.

astro-ph.HE↗

arXiv2022

The Rapidly Spinning Intermediate-Mass Black Hole 3XMM J150052.0+015452

A star tidally disrupted by a black hole can form an accretion disc with a super-Eddington mass accretion rate; the X-ray emission produced by the inner disc provides constraints on the black hole mass $M_\bullet$ and dimensionless spin parameter $a_\bullet$. Previous studies have suggested that the $M_\bullet$ responsible for the tidal disruption event 3XMM J150052.0+015452 (hereafter J150052) is $\sim$10$^{5} M_{\odot}$, in the intermediate black hole (IMBH) regime. Fitting multi-epoch XMM-Newton and Chandra X-ray spectra obtained after 2008 during the source's decade-long decay, with our latest slim accretion disc model gives $M_\bullet = 2.0^{+1.0}_{-0.3}\times10^{5} M_{\odot}$ (at 68% confidence) and $a_\bullet > 0.97$ (a 84.1% confidence lower limit). The spectra obtained between 2008-2014 are significantly harder than those after 2014, an evolution that can be well explained by including the effects of inverse-Comptonisation by a corona on the early-time spectra. The corona is present when the source accretion rate is super-Eddington, while there is no evidence for its effect in data obtained after 2014, when the mass accretion rate is around the Eddington-limit. Based on our spectral study, we infer that the corona is optically thick and warm ($kT_e=2.3^{+2.7}_{-0.8}$ keV). Our mass and spin measurements of J150052 confirm it as an IMBH and point to a rapid, near extremal, spin. These $M_\bullet$ and $a_\bullet$ values rule out both vector bosons and axions of masses $\sim10^{-16}$ eV.

astro-ph.HE↗

arXiv2022

Live to die another day: the rebrightening of AT2018fyk as a repeating partial tidal disruption event

Stars that interact with supermassive black holes (SMBHs) can either be completely or partially destroyed by tides. In a partial tidal disruption event (TDE) the high-density core of the star remains intact, and the low-density, outer envelope of the star is stripped and feeds a luminous accretion episode. The TDE AT2018fyk, with an inferred black hole mass of $10^{7.7\pm0.4}$ M$_{\odot}$, experienced an extreme dimming event at X-ray (factor of $>$6000) and UV (factor $\sim$15) wavelengths $\sim$500--600 days after discovery. Here we report on the re-emergence of these emission components roughly 1200 days after discovery. We find that the source properties are similar to those of the pre-dimming accretion state, suggesting that the accretion flow was rejuvenated to a similar state. We propose that a repeating partial TDE, where the partially disrupted star is on a $\sim 1200$ day orbit about the SMBH and is periodically stripped of mass during each pericenter passage, powers its unique lightcurve. This scenario provides a plausible explanation for AT2018fyk's overall properties, including the rapid dimming event and the rebrightening at late times. We also provide testable predictions for the behavior of the accretion flow in the future: if the second encounter was also a partial disruption then we predict another strong dimming event around day 1800 (August 2023), and a subsequent rebrightening around day 2400 (March 2025). This source provides strong evidence of the partial disruption of a star by a SMBH.

astro-ph.HE↗

arXiv2022

In-flight gain monitoring of SPIDER's transition-edge sensor arrays

Experiments deploying large arrays of transition-edge sensors (TESs) often require a robust method to monitor gain variations with minimal loss of observing time. We propose a sensitive and non-intrusive method for monitoring variations in TES responsivity using small square waves applied to the TES bias. We construct an estimator for a TES's small-signal power response from its electrical response that is exact in the limit of strong electrothermal feedback. We discuss the application and validation of this method using flight data from SPIDER, a balloon-borne telescope that observes the polarization of the cosmic microwave background with more than 2000 TESs. This method may prove useful for future balloon- and space-based instruments, where observing time and ground control bandwidth are limited.

astro-ph.IM↗

arXiv2022

A Simulation-Based Method for Correcting Mode Coupling in CMB Angular Power Spectra

Modern CMB analysis pipelines regularly employ complex time-domain filters, beam models, masking, and other techniques during the production of sky maps and their corresponding angular power spectra. However, these processes can generate couplings between multipoles from the same spectrum and from different spectra, in addition to the typical power attenuation. Within the context of pseudo-$C_\ell$ based, MASTER-style analyses, the net effect of the time-domain filtering is commonly approximated by a multiplicative transfer function, $F_{\ell}$, that can fail to capture mode mixing and is dependent on the spectrum of the signal. To address these shortcomings, we have developed a simulation-based spectral correction approach that constructs a two-dimensional transfer matrix, $J_{\ell\ell'}$, which contains information about mode mixing in addition to mode attenuation. We demonstrate the application of this approach on data from the first flight of the SPIDER balloon-borne CMB experiment.

astro-ph.CO↗

arXiv2021

The XFaster Power Spectrum and Likelihood Estimator for the Analysis of Cosmic Microwave Background Maps

We present the XFaster analysis package. XFaster is a fast, iterative angular power spectrum estimator based on a diagonal approximation to the quadratic Fisher matrix estimator. XFaster uses Monte Carlo simulations to compute noise biases and filter transfer functions and is thus a hybrid of both Monte Carlo and quadratic estimator methods. In contrast to conventional pseudo-$C_\ell$ based methods, the algorithm described here requires a minimal number of simulations, and does not require them to be precisely representative of the data to estimate accurate covariance matrices for the bandpowers. The formalism works with polarization-sensitive observations and also data sets with identical, partially overlapping, or independent survey regions. The method was first implemented for the analysis of BOOMERanG data, and also used as part of the Planck analysis. Here, we describe the full, publicly available analysis package, written in Python, as developed for the analysis of data from the 2015 flight of the SPIDER instrument. The package includes extensions for self-consistently estimating null spectra and for estimating fits for Galactic foreground contributions. We show results from the extensive validation of XFaster using simulations, and its application to the SPIDER data set.

astro-ph.CO↗

arXiv2021

A Constraint on Primordial $B$-Modes from the First Flight of the SPIDER Balloon-Borne Telescope

We present the first linear polarization measurements from the 2015 long-duration balloon flight of SPIDER, an experiment designed to map the polarization of the cosmic microwave background (CMB) on degree angular scales. Results from these measurements include maps and angular power spectra from observations of 4.8% of the sky at 95 and 150 GHz, along with the results of internal consistency tests on these data. While the polarized CMB anisotropy from primordial density perturbations is the dominant signal in this region of sky, Galactic dust emission is also detected with high significance; Galactic synchrotron emission is found to be negligible in the SPIDER bands. We employ two independent foreground-removal techniques in order to explore the sensitivity of the cosmological result to the assumptions made by each. The primary method uses a dust template derived from Planck data to subtract the Galactic dust signal. A second approach, employing a joint analysis of SPIDER and Planck data in the harmonic domain, assumes a modified-blackbody model for the spectral energy distribution of the dust with no constraint on its spatial morphology. Using a likelihood that jointly samples the template amplitude and $r$ parameter space, we derive 95% upper limits on the primordial tensor-to-scalar ratio from Feldman-Cousins and Bayesian constructions, finding $r<0.11$ and $r<0.19$, respectively. Roughly half the uncertainty in $r$ derives from noise associated with the template subtraction. New data at 280 GHz from SPIDER's second flight will complement the Planck polarization maps, providing powerful measurements of the polarized Galactic dust emission.

astro-ph.CO↗

arXiv2020

Design and pre-flight performance of SPIDER 280 GHz receivers

In this work we describe upgrades to the Spider balloon-borne telescope in preparation for its second flight, currently planned for December 2021. The Spider instrument is optimized to search for a primordial B-mode polarization signature in the cosmic microwave background at degree angular scales. During its first flight in 2015, Spider mapped ~10% of the sky at 95 and 150 GHz. The payload for the second Antarctic flight will incorporate three new 280 GHz receivers alongside three refurbished 95- and 150 GHz receivers from Spider's first flight. In this work we discuss the design and characterization of these new receivers, which employ over 1500 feedhorn-coupled transition-edge sensors. We describe pre-flight laboratory measurements of detector properties, and the optical performance of completed receivers. These receivers will map a wide area of the sky at 280 GHz, providing new information on polarized Galactic dust emission that will help to separate it from the cosmological signal.

astro-ph.IM↗

arXiv2019

First test of a $\mathrm{CdMoO_4}$ scintillating bolometer for neutrinoless double beta decay experiments with $\mathrm{{}^{116}Cd}$ and $\mathrm{{}^{100}Mo}$ nuclides

A large cylindrical cadmium molybdate crystal with natural isotopic abundance has been used to fabricate a scintillating bolometer. The measurement was performed above ground at milli-Kelvin temperature, with simultaneous readout of the heat and the scintillation light. The energy resolution as FWHM has achieved from 5 keV (at 238 keV) to 13 keV (at 2615 keV). We present the results of the $α$ versus $β$/$γ$ events discrimination. The low internal trace contamination of the $\mathrm{CdMoO_4}$ crystal was evaluated as well. The detector performance with preliminary positive indications proves that cadmium molybdate crystal is a promising absorber for neutrinoless double beta decay scintillating bolometric experiments with $\mathrm{{}^{116}Cd}$ and $\mathrm{{}^{100}Mo}$ nuclides in the next-generation technique.

physics.ins-det↗

arXiv2017

280 GHz Focal Plane Unit Design and Characterization for the SPIDER-2 Suborbital Polarimeter

We describe the construction and characterization of the 280 GHz bolometric focal plane units (FPUs) to be deployed on the second flight of the balloon-borne SPIDER instrument. These FPUs are vital to SPIDER's primary science goal of detecting or placing an upper limit on the amplitude of the primordial gravitational wave signature in the cosmic microwave background (CMB) by constraining the B-mode contamination in the CMB from Galactic dust emission. Each 280 GHz focal plane contains a 16 x 16 grid of corrugated silicon feedhorns coupled to an array of aluminum-manganese transition-edge sensor (TES) bolometers fabricated on 150 mm diameter substrates. In total, the three 280 GHz FPUs contain 1,530 polarization sensitive bolometers (765 spatial pixels) optimized for the low loading environment in flight and read out by time-division SQUID multiplexing. In this paper we describe the mechanical, thermal, and magnetic shielding architecture of the focal planes and present cryogenic measurements which characterize yield and the uniformity of several bolometer parameters. The assembled FPUs have high yields, with one array as high as 95% including defects from wiring and readout. We demonstrate high uniformity in device parameters, finding the median saturation power for each TES array to be ~3 pW at 300 mK with a less than 6% variation across each array at one standard deviation. These focal planes will be deployed alongside the 95 and 150 GHz telescopes in the SPIDER-2 instrument, slated to fly from McMurdo Station in Antarctica in December 2018.

astro-ph.IM↗

arXiv2016

Seismic isolation of Advanced LIGO: Review of strategy, instrumentation and performance

Isolating ground-based interferometric gravitational wave observatories from environmental disturbances is one of the great challenges of the advanced detector era. In order to directly observe gravitational waves, the detector components and test masses must be highly inertially decoupled from the ground motion not only to sense the faint strain of space-time induced by gravitational waves, but also to maintain the resonance of the very sensitive 4 km interferometers. This article presents the seismic isolation instrumentation and strategy developed for Advanced LIGO interferometers. It reviews over a decade of research on active isolation in the context of gravitational wave detection, and presents the performance recently achieved with the Advanced LIGO observatory. Lastly, it discusses prospects for future developments in active seismic isolation and the anticipated benefits to astrophysical gravitational wave searches. Beyond gravitational wave research, the goal of this article is to provide detailed isolation strategy guidelines for sensitive ground-based physics experiments that may benefit from similar levels of inertial isolation.

physics.ins-det↗

arXiv2014

Free-flight experiments in LISA Pathfinder

The LISA Pathfinder mission will demonstrate the technology of drag-free test masses for use as inertial references in future space-based gravitational wave detectors. To accomplish this, the Pathfinder spacecraft will perform drag-free flight about a test mass while measuring the acceleration of this primary test mass relative to a second reference test mass. Because the reference test mass is contained within the same spacecraft, it is necessary to apply forces on it to maintain its position and attitude relative to the spacecraft. These forces are a potential source of acceleration noise in the LISA Pathfinder system that are not present in the full LISA configuration. While LISA Pathfinder has been designed to meet it's primary mission requirements in the presence of this noise, recent estimates suggest that the on-orbit performance may be limited by this `suspension noise'. The drift-mode or free-flight experiments provide an opportunity to mitigate this noise source and further characterize the underlying disturbances that are of interest to the designers of LISA-like instruments. This article provides a high-level overview of these experiments and the methods under development to analyze the resulting data.

gr-qc↗

arXiv2013

Hydraulic External Pre-Isolator System for LIGO

The Hydraulic External Pre-Isolator (HEPI) is the first 6 degrees of freedom active seismic isolation system implemented at the Laser Interferometer Gravitational Wave Observatory (LIGO). Implementation was first completed at the LIGO Livingston Observatory (LLO) prior to LIGO's 5th science run, successfully cutting down the disturbance seen by LLO's suspended optics in the two most prominent seismic disturbance bands, the microseism (0.1-0.3Hz) and the anthropogenic (1-3Hz) bands, by a factor of a few to tens. The improvement in seismic isolation contributed directly to LLO's much improved duty cycle of 66.7% and LIGO's triple coincident duty cycle of 53%. We report the design, control scheme, and isolation performance of HEPI at LLO in this paper. Aided with this success, funding for incorporating HEPI into the LIGO Hanford Observatory was approved and installation is currently underway.

gr-qc↗