SearcharxivSearch

arXiv subjects

Sabit Ekin

Publications and source records attributed to Sabit Ekin.

At least 19 recordsLinked to original sources

Quantifying the Reality Gap for RL-Based UAV Placement at mmWave and Sub-THz

Reinforcement learning (RL) policies for unmanned aerial vehicle (UAV) placement in mmWave and sub-terahertz networks are typically trained on simplified analytical channels. We quantify the resulting sim-to-real gap on a real urban map of Doha, Qatar, at carriers {28, 140, 183, 300} GHz and altitudes {50, 75, 100, 125} m, evaluating three channel pipelines: an analytical model (FSPL + atmospheric absorption + cuboid LoS), full Monte-Carlo ray tracing in Sionna RT with ITU-R P.676-13 absorption, and a deterministic-LoS hybrid that reuses Sionna's mesh under a closed-form path-gain expression. We formalize the gap on the spatial SNR distribution via four metrics, namely bias, RMSE, Jensen-Shannon divergence, and optimum-deployment displacement. Three findings emerge: at 28/140 GHz, $\sim$70% of the apparent -5.6/-4.8 dB Sionna bias is Monte-Carlo undersampling and shrinks to -1.7/-1.5 dB after mitigation; at 183 GHz a -9.2 dB residual isolates the atmospheric absorption / ITU-R P.676 line-shape disagreement; at 300 GHz the stochastic ray tracer agrees with the analytical model only coincidentally, with a +3.8 dB structural offset exposed by the deterministic-LoS pipeline. Across all carriers the linear-domain regret of the analytical-trained policy stays $\geq$ 0.93, indicating practical near-optimality but with a carrier-resolved SNR bias that warrants explicit reporting.

eess.SY

The Anatomy of RF Chains: Metrics, Measures, and Operating Efficiency

In 1958, Haus and Adler [1] introduced the concept of noise measure. Noise measure is a single quantitative metric that provides a comprehensive basis for comparing devices (individual circuits or outcomes of optimization iterations) in terms of their contribution to overall system noise by incorporating both noise factor and available power gain. Unlike noise factor alone, which reflects how much a device degrades the signal-to-noise ratio, noise measure captures the trade-off between noise and gain, making it a system-aware metric. This distinction is especially important when comparing devices in multistage systems, where both parameters jointly influence the overall system noise. Building on Haus and Adler's work, this article aims to advance RF system design by extending traditional device metrics, such as noise factor and noise measure, with new system-aware metrics: linearity, dynamic range, power efficiency, and waste measures. These new measures are interpretable, computable, and cascadable, making them well-suited for comparing the impact of individual devices or tracking the convergence of circuit design iterations on overall system-level performance. Additionally, a new metric--operating efficiency--is introduced, which unifies power efficiency, dynamic range, and data rate by incorporating signal statistics and variability in communication circuits and systems. Operating efficiency enables robust evaluation of devices under realistic and transient operating conditions, including interference, modulated signals, and adaptive modulation schemes.

eess.SY

Bypassing the CSI Bottleneck: MARL-Driven Spatial Control for Reflector Arrays

Reconfigurable Intelligent Surfaces (RIS) are pivotal for next-generation smart radio environments, yet their practical deployment is severely bottlenecked by the intractable computational overhead of Channel State Information (CSI) estimation. To bypass this fundamental physical-layer barrier, we propose an AI-native, data-driven paradigm that replaces complex channel modeling with spatial intelligence. This paper presents a fully autonomous Multi-Agent Reinforcement Learning (MARL) framework to control mechanically adjustable metallic reflector arrays. By mapping high-dimensional mechanical constraints to a reduced-order virtual focal point space, we deploy a Centralized Training with Decentralized Execution (CTDE) architecture. Using Multi-Agent Proximal Policy Optimization (MAPPO), our decentralized agents learn cooperative beam-focusing strategies relying on user coordinates, achieving CSI-free operation. High-fidelity ray-tracing simulations in dynamic non-line-of-sight (NLOS) environments demonstrate that this multi-agent approach rapidly adapts to user mobility, yielding up to a 26.86 dB enhancement over static flat reflectors and outperforming single-agent and hardware-constrained DRL baselines in both spatial selectivity and temporal stability. Crucially, the learned policies exhibit good deployment resilience, sustaining stable signal coverage even under 1.0-meter localization noise. These results validate the efficacy of MARL-driven spatial abstractions as a scalable, highly practical pathway toward AI-empowered wireless networks.

cs.AI

Learning to Focus: CSI-Free Hierarchical MARL for Reconfigurable Reflectors

Reconfigurable Intelligent Surfaces (RIS) have the potential to engineer smart radio environments for next-generation millimeter-wave (mmWave) networks. However, the prohibitive computational overhead of Channel State Information (CSI) estimation and the dimensionality explosion inherent in centralized optimization severely hinder practical large-scale deployments. To overcome these bottlenecks, we introduce a per-element CSI-free paradigm powered by a Hierarchical Multi-Agent Reinforcement Learning (HMARL) architecture to control mechanically reconfigurable reflective surfaces. By substituting pilot-based channel estimation for each element of the device with accessible user localization data, our framework leverages spatial intelligence for macro-scale wave propagation management. The control problem is decomposed into a two-tier neural architecture: a high-level controller executes temporally extended, discrete user-to-reflector allocations, while low-level controllers autonomously optimize continuous focal points using Multi-Agent Proximal Policy Optimization (MAPPO) under a Centralized Training with Decentralized Execution (CTDE) scheme. Comprehensive deterministic ray-tracing evaluations in an indoor mmWave scenario demonstrate that this hierarchical framework achieves received signal strength indicator (RSSI) improvements of up to 7.79 dB over centralized Proximal Policy Optimization (PPO) baselines. Furthermore, the system maintains resilient beam-focusing performance under practical sub-meter localization tracking errors for up to four users and two reflector arrays. By eliminating execution-time CSI overhead while preserving high-fidelity signal redirection, this work provides a scalable and cost-effective step toward intelligent indoor wireless environments.

cs.AI

Learning to Reflect: Hierarchical Multi-Agent Reinforcement Learning for CSI-Free mmWave Beam-Focusing

Reconfigurable Intelligent Surfaces promise to transform wireless environments, yet practical deployment is hindered by the prohibitive overhead of Channel State Information (CSI) estimation and the dimensionality explosion inherent in centralized optimization. This paper proposes a Hierarchical Multi-Agent Reinforcement Learning (HMARL) framework for the control of mechanically reconfigurable reflective surfaces in millimeter-wave (mmWave) systems. We introduce a "CSI-free" paradigm that substitutes pilot-based channel estimation with readily available user localization data. To manage the massive combinatorial action space, the proposed architecture utilizes Multi-Agent Proximal Policy Optimization (MAPPO) under a Centralized Training with Decentralized Execution (CTDE) paradigm. The proposed architecture decomposes the control problem into two abstraction levels: a high-level controller for user-to-reflector allocation and decentralized low-level controllers for low-level focal point optimization. Comprehensive ray-tracing evaluations demonstrate that the framework achieves 2.81-7.94 dB RSSI improvements over centralized baselines, with the performance advantage widening as system complexity increases. Scalability analysis reveals that the system maintains sustained efficiency, exhibiting minimal per-user performance degradation and stable total power utilization even when user density doubles. Furthermore, robustness validation confirms the framework's viability across varying reflector aperture sizes (45-99 tiles) and demonstrates graceful performance degradation under localization errors up to 0.5 m. By eliminating CSI overhead while maintaining high-fidelity beam-focusing, this work establishes HMARL as a practical solution for intelligent mmWave environments.

cs.LG

Masked Symbol Modeling for Demodulation of Oversampled Baseband Communication Signals in Impulsive Noise-Dominated Channels

Recent breakthroughs in natural language processing show that attention mechanism in Transformer networks, trained via masked-token prediction, enables models to capture the semantic context of the tokens and internalize the grammar of language. While the application of Transformers to communication systems is a burgeoning field, the notion of context within physical waveforms remains under-explored. This paper addresses that gap by re-examining inter-symbol contribution (ISC) caused by pulse-shaping overlap. Rather than treating ISC as a nuisance, we view it as a deterministic source of contextual information embedded in oversampled complex baseband signals. We propose Masked Symbol Modeling (MSM), a framework for the physical (PHY) layer inspired by Bidirectional Encoder Representations from Transformers methodology. In MSM, a subset of symbol aligned samples is randomly masked, and a Transformer predicts the missing symbol identifiers using the surrounding "in-between" samples. Through this objective, the model learns the latent syntax of complex baseband waveforms. We illustrate MSM's potential by applying it to the task of demodulating signals corrupted by impulsive noise, where the model infers corrupted segments by leveraging the learned context. Our results suggest a path toward receivers that interpret, rather than merely detect communication signals, opening new avenues for context-aware PHY layer design.

eess.SP

Theoretical Foundations of Waste Factor and Waste Figure with Applications to Fixed Wireless Access and Relay Systems

The exponential rise in energy consumption across wireless communication systems, particularly in anticipation of next-generation wireless systems, necessitates rigorous frameworks for evaluating and optimizing energy efficiency. This paper revisits and expands the concept of the Waste Factor (W), or Waste Figure (WF) in decibel scale, as a unifying metric that captures both utilized and wasted power in cascaded communication systems. Building upon its foundation in system-level power modeling, we integrate the Waste Factor into a refined formulation of the Consumption Factor (CF), the ratio of data rate to total consumed power, linking it directly to Shannon's theoretical limit on energy per bit. This analysis introduces additive energy waste into the classical energy-per-bit derivation through the Waste Factor term. We derive closed-form expressions for energy-per-bit expenditure in both direct and relay-assisted links and develop a decision rule to determine which communication path is more energy efficient under given conditions. While not modeled explicitly, Reflective Intelligent Surfaces (RIS) can be interpreted as a special case of relay-based architectures within this unified formulation, suggesting broader applicability of the Waste Factor framework to emerging 6G use cases. The framework is then extended to a Fixed Wireless Access (FWA) scenario, where uplink and downlink asymmetries, traffic directionality, and component inefficiencies are jointly considered to analyze energy-optimal deployment strategies.

eess.SY

Signal Whisperers: Enhancing Wireless Reception Using DRL-Guided Reflector Arrays

This paper presents a multi-agent reinforcement learning (MARL) approach for controlling adjustable metallic reflector arrays to enhance wireless signal reception in non-line-of-sight (NLOS) scenarios. Unlike conventional reconfigurable intelligent surfaces (RIS) that require complex channel estimation, our system employs a centralized training with decentralized execution (CTDE) paradigm where individual agents corresponding to reflector segments autonomously optimize reflector element orientation in three-dimensional space using spatial intelligence based on user location information. Through extensive ray-tracing simulations with dynamic user mobility, the proposed multi-agent beam-focusing framework demonstrates substantial performance improvements over single-agent reinforcement learning baselines, while maintaining rapid adaptation to user movement within one simulation step. Comprehensive evaluation across varying user densities and reflector configurations validates system scalability and robustness. The results demonstrate the potential of learning-based approaches for adaptive wireless propagation control.

eess.SP

Block Phase Tracking Reference Signal (PTRS) Allocation for DFT-s-OFDM

This study introduces a Block Phase Tracking Reference Signal (PTRS) allocation approach for Discrete Fourier Transform-spread-Orthogonal Frequency Division Multiplexing (DFT-s-OFDM) systems to enhance phase noise tracking and compensation. Our proposed block allocation methodology leverages the concepts of multiresolution time-frequency tiling for more effective sampling, thereby mitigating aliasing effects and improving phase noise resilience. A key contribution of our approach is a novel modulation and demodulation scheme, incorporating a dedicated DFT-s-OFDM symbol, a modulator branch for block PTRS generation, and a dedicated demodulator for accurate phase noise estimation and correction.

eess.SP

Simulation-Based Optimistic Policy Iteration For Multi-Agent MDPs with Kullback-Leibler Control Cost

This paper proposes an agent-based optimistic policy iteration (OPI) scheme for learning stationary optimal stochastic policies in multi-agent Markov Decision Processes (MDPs), in which agents incur a Kullback-Leibler (KL) divergence cost for their control efforts and an additional cost for the joint state. The proposed scheme consists of a greedy policy improvement step followed by an m-step temporal difference (TD) policy evaluation step. We use the separable structure of the instantaneous cost to show that the policy improvement step follows a Boltzmann distribution that depends on the current value function estimate and the uncontrolled transition probabilities. This allows agents to compute the improved joint policy independently. We show that both the synchronous (entire state space evaluation) and asynchronous (a uniformly sampled set of substates) versions of the OPI scheme with finite policy evaluation rollout converge to the optimal value function and an optimal joint policy asymptotically. Simulation results on a multi-agent MDP with KL control cost variant of the Stag-Hare game validates our scheme's performance in terms of minimizing the cost return.

cs.AI

Guiding Wireless Signals with Arrays of Metallic Linear Fresnel Reflectors: A Low-cost, Frequency-versatile, and Practical Approach

This study presents a novel mechanical metallic reflector array to guide wireless signals to the point of interest, thereby enhancing received signal quality. Comprised of numerous individual units, this device, which acts as a linear Fresnel reflector (LFR), facilitates the reflection of incoming signals to a desired location. Leveraging geometric principles, we present a systematic approach for redirecting beams from an Access Point (AP) toward User Equipment (UE) positions. This methodology is geared towards optimizing beam allocation, thereby maximizing the number of beams directed towards the UE. Ray tracing simulations conducted for two 3D wireless communication scenarios demonstrate significant increases in path gains and received signal strengths (RSS) by at least 50dB with strategically positioned devices.

eess.SP

Propeller Modulation Equalization via Reference Tones

Propeller modulation, also known as micro-Doppler modulation, presents a significant challenge in radio frequency (RF) inspection operations conducted via drones. This paper investigates the equalization of propeller modulation effects on RF signals, specifically targeting applications in navigation aids such as Instrument Landing Systems (ILS). By employing a continuous reference tone, the propeller-induced Doppler spread can be effectively captured and equalized, improving signal integrity and accuracy. Simulation results demonstrate that the proposed equalization method significantly reduces DDM deviation caused by propeller modulation, even under various propeller speeds. The findings suggest that incorporating such equalization techniques can enhance the reliability and efficiency of drone-based RF inspections.

eess.SP

A Perspective on the Impact of Group Delay Dispersion in Future Terahertz Wireless Systems

This article discusses the challenges and opportunities of managing group delay dispersion (GDD) and its relation to the performance standards of future sixth-generation (6G) wireless communication systems utilizing terahertz frequency waves. The unique susceptibilities of 6G systems to GDD are described, along with a quantitative description of the sources of GDD, including multipath, rough surface scattering, intelligent reflecting surfaces, and propagation through the atmosphere. An experimental case-study is presented that confirms previous models quantifying the impact of atmospheric GDD. Several GDD manipulation strategies are presented illustrating their hindered effectiveness in the 6G context. Conversely, some benefits of leveraging GDD to enhance 6G systems, such as improved security and simplified hardware, are also discussed. Finally, a perspective on using photonic GDD control devices is provided, revealing quantitative benefits that may unburden existing equalization schemes. The article argues that GDD will uniquely and significantly impact some 6G systems, but that its careful consideration along with new mitigation strategies, including photonic devices, will help optimize system performance. The conclusion provides a perspective to guide future research in this area.

eess.SP

Free-Space Optical Channel Turbulence Prediction: A Machine Learning Approach

Channel turbulence is a formidable obstacle for free-space optical (FSO) communication. Anticipation of turbulence levels is highly important for mitigating disruptions but has not been demonstrated without dedicated, auxiliary hardware. We show that machine learning (ML) can be applied to raw FSO data streams to rapidly predict channel turbulence levels with no additional sensing hardware. FSO was conducted through a controlled channel in the lab under six distinct turbulence levels, and the efficacy of using ML to classify turbulence levels was examined. ML-based turbulence level classification was found to be >98% accurate with multiple ML training parameters. Classification effectiveness was found to depend on the timescale of changes between turbulence levels but converges when turbulence stabilizes over about a one minute timescale.

eess.SY

Large Language Models (LLMs) Assisted Wireless Network Deployment in Urban Settings

The advent of Large Language Models (LLMs) has revolutionized language understanding and human-like text generation, drawing interest from many other fields with this question in mind: What else are the LLMs capable of? Despite their widespread adoption, ongoing research continues to explore new ways to integrate LLMs into diverse systems. This paper explores new techniques to harness the power of LLMs for 6G (6th Generation) wireless communication technologies, a domain where automation and intelligent systems are pivotal. The inherent adaptability of LLMs to domain-specific tasks positions them as prime candidates for enhancing wireless systems in the 6G landscape. We introduce a novel Reinforcement Learning (RL) based framework that leverages LLMs for network deployment in wireless communications. Our approach involves training an RL agent, utilizing LLMs as its core, in an urban setting to maximize coverage. The agent's objective is to navigate the complexities of urban environments and identify the network parameters for optimal area coverage. Additionally, we integrate LLMs with Convolutional Neural Networks (CNNs) to capitalize on their strengths while mitigating their limitations. The Deep Deterministic Policy Gradient (DDPG) algorithm is employed for training purposes. The results suggest that LLM-assisted models can outperform CNN-based models in some cases while performing at least as well in others.

cs.AI

Anticipating Optical Availability in Hybrid RF/FSO Links Using RF Beacons and Deep Learning

Radio frequency (RF) communications offer reliable but low data rates and energy-inefficient satellite links, while free-space optical (FSO) promises high bandwidth but struggles with disturbances imposed by atmospheric effects. A hybrid RF/FSO architecture aims to achieve optimal reliability along with high data rates for space communications. Accurate prediction of dynamic ground-to-satellite FSO link availability is critical for routing decisions in low-earth orbit constellations. In this paper, we propose a system leveraging ubiquitous RF links to proactively forecast FSO link degradation prior to signal drops below threshold levels. This enables pre-calculation of rerouting to maximally maintain high data rate FSO links throughout the duration of weather effects. We implement a supervised learning model to anticipate FSO attenuation based on the analysis of RF patterns. Through the simulation of a dense lower earth orbit (LEO) satellite constellation, we demonstrate the efficacy of our approach in a simulated satellite network, highlighting the balance between predictive accuracy and prediction duration. An emulated cloud attenuation model is proposed which provides insight into the temporal profiles of RF signals and their correlation to FSO channel dynamics. Our investigation sheds light on the trade-offs between prediction horizon and accuracy arising from RF beacon proximity, achieving a prediction accuracy of 86\% with 16 RF beacons.

eess.SY

Respiratory Anomaly Detection using Reflected Infrared Light-wave Signals

In this study, we present a non-contact respiratory anomaly detection method using incoherent light-wave signals reflected from the chest of a mechanical robot that can breathe like human beings. In comparison to existing radar and camera-based sensing systems for vitals monitoring, this technology uses only a low-cost ubiquitous infrared light source and sensor. This light-wave sensing system recognizes different breathing anomalies from the variations of light intensity reflected from the chest of the robot within a 0.5m-1.5m range with an average classification accuracy of up to 96.6% using machine learning.

eess.SP

Evolutionary Optimization of 1D-CNN for Non-contact Respiration Pattern Classification

In this study, we present a deep learning-based approach for time-series respiration data classification. The dataset contains regular breathing patterns as well as various forms of abnormal breathing, obtained through non-contact incoherent light-wave sensing (LWS) technology. Given the one-dimensional (1D) nature of the data, we employed a 1D convolutional neural network (1D-CNN) for classification purposes. Genetic algorithm was employed to optimize the 1D-CNN architecture to maximize classification accuracy. Addressing the computational complexity associated with training the 1D-CNN across multiple generations, we implemented transfer learning from a pre-trained model. This approach significantly reduced the computational time required for training, thereby enhancing the efficiency of the optimization process. This study contributes valuable insights into the potential applications of deep learning methodologies for enhancing respiratory anomaly detection through precise and efficient respiration classification.

eess.SP