arXiv subjects

Sabrina Garattoni

Publications and source records attributed to Sabrina Garattoni.

10 recordsLinked to original sources

arXiv2026

Two-Level System Spectroscopy from Correlated Multilevel Relaxation in Superconducting Qubits

Transmon qubits are a cornerstone of modern superconducting quantum computing platforms. Temporal fluctuations of energy relaxation in these qubits are widely attributed to microscopic two-level systems (TLSs) in device dielectrics and interfaces, yet isolating individual defects typically relies on tuning the qubit or the TLS into resonance. We demonstrate a novel spectroscopy method for fixed-frequency transmons based on multilevel relaxation: repeated preparation of the second excited state and simultaneous $T_1$ extraction of the first and second excited states reveals characteristic correlations in the decay rates of adjacent transitions. From these correlations we identify one or more dominant TLSs and reconstruct their frequency drift over time. Remarkably, we find that TLSs detuned by $\gtrsim 100\,\mathrm{MHz}$ from the qubit transition can still significantly influence relaxation. The proposed method provides a powerful tool for TLS spectroscopy without the need to tune the transmon frequency, either via a flux-tunable inductor or AC-Stark shifts.

quant-ph↗

arXiv2026

Effect of metal encapsulation on bulk superconducting properties of niobium thin films used in qubits

Niobium metal occupies nearly 100\% of the volume of a typical 2D transmon device. While the aluminum Josephson junction is of utmost importance, maintaining quantum coherence across the entire device means that pair-breaking in Nb leads, capacitive pads, and readout resonators can be a major source of decoherence. The established contributors are surface oxides and hydroxides, as well as absorbed hydrogen and oxygen. Metal encapsulation of freshly grown surfaces with non-oxidizing metals, preferably without breaking the vacuum, is a successful strategy to mitigate these issues. While the positive effects of encapsulation are undeniable, it is important to understand its impact on the macroscopic behavior of niobium films. We present a comprehensive study of the bulk superconducting properties of Nb thin films encapsulated with gold and palladium/gold, and compare them to those of bare Nb films. Magneto-optical imaging, magnetization, resistivity, and London and Campbell penetration depth measurements reveal significant differences in encapsulated samples. Both sputtered, and epitaxial Au-capped films exhibit the highest residual resistivity ratio and superconducting transition temperature, as well as the lowest upper critical field, London penetration depth, and critical current. These results are in good agreement with the microscopic theory of anisotropic normal and superconducting states of Nb. We conclude that pair-breaking in the bulk of niobium films, driven by disorder throughout the film rather than just at the surface, is a significant source of quantum decoherence in transmons. We also conclude that gold capping not only passivates the surface but also affects the properties of the entire film, significantly reducing the scattering rate due to defects likely induced by surface diffusion if the film is not protected immediately after fabrication.

cond-mat.supr-con↗

arXiv2026

Oxygen distribution and segregation at grain boundaries in Nb and Ta-encapsulated Nb thin films for superconducting qubits

We report on atomic-scale analyses of oxygen distribution and segregation at grain boundaries (GBs) of Nb and Ta-encapsulated Nb (Ta/Nb) thin films for superconducting qubits using atom-probe tomography (APT) and transmission electron microscopy (TEM). We observe oxygen segregation at grain boundaries (GBs) relative to the oxygen concentration within the grains for both Nb and Ta-capped Nb thin films for superconducting qubits and find that higher oxygen concentration in the interior of Nb grains lead to greater oxygen segregation levels at GBs. This finding emphasizes that controlling oxygen impurities in Nb during film deposition and fabrication processing is important to reduce the level of oxygen segregation at GBs in Nb. The enrichment factor (Cgb/Cgrain) for oxygen segregation at GBs in Nb is 2.7 (error bar: 0.3) for Nb films, and Ta-capped Nb thin films exhibit slightly reduced Nb GB enrichment factors of 2.3 (error bar: 0.3) while GBs in the Ta capping layer itself possess higher enrichment factors of 3.0 (error bar: 0.3). We hypothesize that the Ta capping layer can trap oxygen and thereby affect oxygen in-diffusion and segregation at GBs in the underlying Nb thin films. Finally, we find that increases in the oxygen concentration in both Nb grains and GBs correlate with a suppression in the critical temperature for superconductivity (Tc). Together, our comparative chemical and charge transport property analyses provide atomic-scale insights into a potential mechanism contributing to decoherence in superconducting qubits.

cond-mat.supr-con↗

arXiv2025

A Cryogenic Muon Tagging System Based on Kinetic Inductance Detectors for Superconducting Quantum Processors

Ionizing radiation has emerged as a potential limiting factor for superconducting quantum processors, inducing quasiparticle bursts and correlated errors that challenge fault-tolerant operation. Atmospheric muons are particularly problematic due to their high energy and penetration power, making passive shielding ineffective. Therefore, monitoring the real-time muon flux is crucial to guide the development of alternative error-correction or mitigation strategies. We present the design, simulation, and first operation of a cryogenic muon-tagging system based on Kinetic Inductance Detectors (KIDs), developed as a stand-alone cryogenic particle-tagging module for superconducting quantum processors. The system consists of two KIDs arranged in a vertical stack and operated at $\sim$20 mK. Monte Carlo simulations based on Geant4 guided the prototype design and provided reference expectations for muon-tagging efficiency and accidental coincidences due to ambient $\gamma$-rays. We observed a muon-induced coincidence rate among the top and bottom detectors of (192 $\pm$ 9)$\times10^{-3}$ events/s, in excellent agreement with the Monte Carlo prediction. The prototype achieves a muon-tagging efficiency of about 90% with negligible dead time. These results demonstrate the feasibility of operating a muon-tagging system at millikelvin temperatures and represent a key step toward the integration of cryogenic veto systems with multi-qubit chips to mitigate muon-induced errors.

quant-ph↗

arXiv2025

Correlating Superconducting Qubit Performance Losses to Sidewall Near-Field Scattering via Terahertz Nanophotonics

Elucidating dielectric losses, structural heterogeneity, and interface imperfections is critical for improving coherence in superconducting qubits. However, most diagnostics rely on destructive electron microscopy or low-throughput millikelvin quantum measurements. Here, we demonstrate noninvasive terahertz (THz) nano-imaging/-spectroscopy of encapsulated niobium transmon qubits, revealing sidewall near-field scattering that correlates with qubit coherence. We further employ a THz hyperspectral line scan to probe dielectric responses and field participation at Al junction interfaces. These findings highlight the promise of THz near-field methods as a high-throughput proxy characterization tool for guiding material selection and optimizing processing protocols to improve qubit and quantum circuit performance.

cond-mat.mes-hall↗

arXiv2025

Ultracoherent superconducting cavity-based multiqudit platform with error-resilient control

Realizing the promise of quantum computing requires simultaneously increasing Hilbert-space size and coherence times. While qubit-based architectures have long been the dominant paradigm, large local Hilbert spaces enable qudits, which offer more compact circuits and natural representations for quantum simulation in chemistry, condensed matter, and high-energy physics. Superconducting radio-frequency (SRF) cavities are attractive building blocks for qudit-based quantum technologies because of their exceptionally low dissipation and large bosonic Hilbert spaces, but turning them into programmable modules requires extra effort because the nonlinear circuitry required for control and measurement often introduces loss and noise that erode the memory advantage. Here we demonstrate a two-mode SRF cavity module weakly coupled to an ancillary transmon circuit and engineered to suppress controller-induced dissipation and dephasing, achieving single-photon lifetimes of 20.6 ms and 15.6 ms and a dephasing time exceeding 40 ms. Using sideband interactions together with error-resilient protocols incorporating measurement-based correction and post-selection, we prepare Fock states up to $N=20$ with fidelities exceeding 95% and generate two-mode entanglement near the coherence limit, approaching 99.9%. By combining ultracoherent storage with high-fidelity control, this work moves cavity-based hardware beyond memory-only operation and establishes a practical route toward high-dimensional encodings and scalable modular quantum information processing.

quant-ph↗

arXiv2025

Identifying Materials-Level Sources of Performance Variation in Superconducting Transmon Qubits

The Superconducting Materials and Systems (SQMS) Center, a DOE National Quantum Information Science Research Center, has conducted a comprehensive and coordinated study using superconducting transmon qubit chips with known performance metrics to identify the underlying materials-level sources of device-to-device performance variation. Following qubit coherence measurements, these qubits of varying base superconducting metals and substrates have been examined with various nondestructive and invasive material characterization techniques at Northwestern University, Ames National Laboratory, and Fermilab as part of a blind study. We find trends in variations of the depth of the etched substrate trench, the thickness of the surface oxide, and the geometry of the sidewall, which when combined, lead to correlations with the T$_1$ lifetime across different devices. In addition, we provide a list of features that varied from device to device, for which the impact on performance requires further studies. Finally, we identify two low-temperature characterization techniques that may potentially serve as proxy tools for qubit measurements. These insights provide materials-oriented solutions to not only reduce performance variations across neighboring devices, but also to engineer and fabricate devices with optimal geometries to achieve performance metrics beyond the state-of-the-art values.

quant-ph↗

arXiv2025

Fast Sideband Control of a Weakly Coupled Multimode Bosonic Memory

Circuit quantum electrodynamics (cQED) with superconducting cavities coupled to nonlinear circuits like transmons offers a promising platform for hardware-efficient quantum information processing. We address critical challenges in realizing this architecture by weakening the dispersive coupling while also demonstrating fast, high-fidelity multimode control by dynamically amplifying gate speeds through transmon-mediated sideband interactions. This approach enables transmon-cavity SWAP gates, for which we achieve speeds up to 30 times larger than the bare dispersive coupling. Combined with transmon rotations, this allows for efficient, universal state preparation in a single cavity mode, though achieving unitary gates and extending control to multiple modes remains a challenge. In this work, we overcome this by introducing two sideband control strategies: (1) a shelving technique that prevents unwanted transitions by temporarily storing populations in sideband-transparent transmon states and (2) a method that exploits the dispersive shift to synchronize sideband transition rates across chosen photon-number pairs to implement transmon-cavity SWAP gates that are selective on photon number. We leverage these protocols to prepare Fock and binomial code states across any of ten modes of a multimode cavity with millisecond cavity coherence times. We demonstrate the encoding of a qubit from a transmon into arbitrary vacuum and Fock state superpositions, as well as entangled NOON states of cavity mode pairs\textemdash a scheme extendable to arbitrary multimode Fock encodings. Furthermore, we implement a new binomial encoding gate that converts arbitrary transmon superpositions into binomial code states in $\qty{4}{\micro\second}$ (less than $1/\chi$), achieving an average post-selected final state fidelity of $\qty{96.3}{\percent}$ across different fiducial input states.

quant-ph↗

arXiv2024

Disentangling the Impact of Quasiparticles and Two-Level Systems on the Statistics of Superconducting Qubit Lifetime

Temporal fluctuations in the superconducting qubit lifetime, $T_1$, bring up additional challenges in building a fault-tolerant quantum computer. While the exact mechanisms remain unclear, $T_1$ fluctuations are generally attributed to the strong coupling between the qubit and a few near-resonant two-level systems (TLSs) that can exchange energy with an assemble of thermally fluctuating two-level fluctuators (TLFs) at low frequencies. Here, we report $T_1$ measurements on the qubits with different geometrical footprints and surface dielectrics as a function of the temperature. By analyzing the noise spectrum of the qubit depolarization rate, $\Gamma_1 = 1/T_1$, we can disentangle the impact of TLSs, non-equilibrium quasiparticles (QPs), and equilibrium (thermally excited) QPs on the variance in $\Gamma_1$. We find that $\Gamma_1$ variances in the qubit with a small footprint are more susceptible to the QP and TLS fluctuations than those in the large-footprint qubits. Furthermore, the QP-induced variances in all qubits are consistent with the theoretical framework of QP diffusion and fluctuation. We suggest these findings can offer valuable insights for future qubit design and engineering optimization.

quant-ph↗

arXiv2024

Directional coupling to a $\lambda/5000$ nano-waveguide

Silicon-based micro-devices are considered promising candidates for consolidating several terahertz technologies into a common and practical platform. The practicality stems from the relatively low loss, device compactness, ease of fabrication, and wide range of available passive and active functionalities. Nevertheless, typical device footprints are limited by diffraction to several hundreds of micrometers, which hinders emerging nanoscale applications of terahertz frequencies. While metallic gap modes provide nanoscale terahertz confinement, efficiently coupling to them is difficult. Here we present and experimentally demonstrate a strategy for efficiently interfacing sub-terahertz radiation ({\lambda}=1 mm) to a waveguide formed by a nanogap, etched in a gold film, that is 200 nm ({\lambda}/5000) wide and up to 4.5 mm long. The design principle relies on phase matching dielectric and nanogap waveguide modes, resulting in efficient directional coupling between them when placed side-by-side. Broadband far field terahertz transmission experiments through the dielectric waveguide reveal a transmission dip near the designed wavelength due to resonant coupling. Near field measurements on the surface of the gold layer confirm that such a dip is accompanied by a transfer of power to the nanogap, with an estimated coupling efficiency of ~10%. Our approach provides a pathway for efficiently interfacing millimeter-wave and near-infrared photonic circuits, providing controlled and tailored nanoscale terahertz confinement, with important implications for on-chip nanospectroscopy, telecommunications, and quantum technologies.

physics.optics↗