arXiv subjects

Sae Woo Nam

Publications and source records attributed to Sae Woo Nam.

At least 19 recordsLinked to original sources

arXiv2026

Quantum Position Verification with Remote Untrusted Devices

Position information underpins many modern technologies, from navigation and timing to authentication and critical infrastructure. However, classical methods of proving that information originates from a particular position are vulnerable to spoofing. This limitation can be overcome with quantum technologies but current protocols rely on trust in quantum hardware that can be undermined, or require quantum computers and bounds on adversarial computation. Nevertheless, there has been significant interest in experimental demonstrations, and aspects of these protocols have been implemented. Here we introduce and experimentally demonstrate the Bell-test quantum position verification protocol for device-independent quantum position verification that guarantees security with only observed correlations from a loophole-free Bell test across a quantum network. We experimentally implement a version of this device-independent protocol against adversaries who, before each trial, are weakly entangled. Our demonstration achieves a one-dimensional localization 2.47(2) times smaller than the best, necessarily non-remote, classical localization protocol. Compared to classical protocols with identical latencies, the localization volume is 4.53(5) times smaller, and represents a certifiable quantum advantage. The general Bell-test protocol is loss tolerant and secure against adversaries with significant quantum resources. This work allows digital security to be anchored to physically trusted locations, enabling new position-based authentication protocols for applications such as financial transactions, legal agreements, and securing critical infrastructure.

quant-ph↗

arXiv2026

Tungsten Germanide Superconducting Nanowire Single-Photon Detectors with Saturated Internal Detection Efficiency at Wavelengths up to 29 μm

Superconducting nanowire single-photon detectors (SNSPDs) are among the most sensitive single-photon detectors available and have the potential to transform fields ranging from infrared astrophysics to molecular spectroscopy. However, extending their performance into the mid-infrared spectral region - crucial for applications such as exoplanet transit spectroscopy and vibrational fingerprinting of molecules - has remained a major challenge, primarily due to material limitations and scalability constraints. Here, we report on the development of SNSPDs based on tungsten germanide, a novel material system that combines high mid-infrared sensitivity with compatibility for large-scale fabrication. Our detectors exhibit saturated internal detection efficiency at wavelengths up to 29 μm, while using 2.7x thicker films (8 nm vs 3 nm) and up to 4.5x wider nanowires (360 nm vs 80 nm) compared to mid-infrared-optimized SNSPDs fabricated from tungsten silicide. This advance will enable scalable, high-performance single-photon detection in a spectral region that was previously inaccessible, opening new frontiers in remote sensing, thermal imaging, environmental monitoring, molecular physics, and astronomy.

physics.ins-det↗

arXiv2026

WSi weak link element with a non-sinusoidal current-phase relation

Nonlinearity is an essential ingredient for encoding quantum states with non-uniform energy spacing, implementing coherent quantum gates, reading out qubits, amplifying, and mixing electromagnetic signals. In this work, we demonstrate the nonlinear behavior of a constriction fabricated from an amorphous, high-kinetic inductance material, tungsten silicide, embedded in a three-dimensional RF-SQUID. We find that the results are consistent with the weak link behaving as a Josephson junction with a sawtooth-like current-phase relation or a quantum phase slip element. Finally, we measure relaxation times of the metastable, persistent-current states trapped in the local minima of the potential.

quant-ph↗

arXiv2025

Localized quasiparticles in a fluxonium with quasi-two-dimensional amorphous kinetic inductors

Disordered superconducting materials with high kinetic inductance are an important resource to generate nonlinearity in quantum circuits and create high-impedance environments. In thin films fabricated from these materials, the combination of disorder and the low effective dimensionality leads to increased order parameter fluctuations and enhanced kinetic inductance values. Among the challenges of harnessing these compounds in coherent devices are their proximity to the superconductor-insulator phase transition, the presence of broken Cooper pairs, and the two-level systems located in the disordered structure. In this work, we fabricate tungsten silicide wires from quasi-two-dimensional films with one spatial dimension smaller than the superconducting coherence length and embed them into microwave resonators and fluxonium qubits, where the kinetic inductance provides the inductive part of the circuits. We study the dependence of loss on the frequency, disorder, and geometry of the device, and find that the loss increases with the level of disorder and is dominated by the localized quasiparticles trapped in the spatial variations of the superconducting gap.

quant-ph↗

arXiv2025

Heterogeneous tantala photonic integrated circuits for sub-micron wavelength applications

Atomic and trapped-ion systems are the backbone of a new generation of quantum-based positioning, navigation, and timing (PNT) technologies. The miniaturization of such quantum systems offers tremendous technological advantages, especially the reduction of system size, weight, and power consumption. Yet, this has been limited by the absence of compact, standalone photonic integrated circuits (PICs) at the wavelengths suitable for these instruments. Mobilizing such photonic systems requires development of fully integrated, on-chip, active components at sub-micrometer wavelengths. We demonstrate heterogeneous photonic integrated circuits operating at 980 nm based on wafer-scale bonding of InGaAs quantum well active regions to tantalum pentoxide passive components. This high-yield process provides > 95 % surface area yield and enables integration of > 1300 active components on a 76.2 mm (3 inch) silicon wafer. We present a diverse set of functions, including semiconductor optical amplifiers, Fabry-Perot lasers, and distributed feedback lasers with 43 dB side-mode suppression ratio and > 250 GHz single-mode tuning range. We test the precise wavelength control and system level functionality of the on-chip lasers by pumping optical parametric oscillation processes in microring resonators fabricated on the same platform, generating short-wavelength signals at 778 nm and 752 nm. These results provide a pathway to realize fully functional integrated photonic engines for operation of compact quantum sensors based on atomic and trapped-ion systems.

physics.optics↗

arXiv2024

Kinetic inductance current sensor for visible to near-infrared wavelength transition-edge sensor readout

Single-photon detectors based on the superconducting transition-edge sensor are used in a number of visible to near-infrared applications, particularly for photon-number-resolving measurements in quantum information science. To be practical for large-scale spectroscopic imaging or photonic quantum computing applications, the size of visible to near-infrared transition-edge sensor arrays and their associated readouts must be increased from a few pixels to many thousands. In this manuscript, we introduce the kinetic inductance current sensor, a scalable readout technology that exploits the nonlinear kinetic inductance in a superconducting resonator to make sensitive current measurements. Kinetic inductance current sensors can replace superconducting quantum interference devices for many applications because of their ability to measure fast, high slew-rate signals, their compatibility with standard microwave frequency-division multiplexing techniques, and their relatively simple fabrication. Here, we demonstrate the readout of a visible to near-infrared transition-edge sensor using a kinetic inductance current sensor with 3.7 MHz of bandwidth. We measure a readout noise of 1.4 pA/$\sqrt{\text{Hz}}$, considerably below the detector noise at frequencies of interest, and an energy resolution of $(0.137 \pm 0.001)$ eV at 0.8 eV, comparable to resolutions observed with non-multiplexed superconducting quantum interference device readouts.

physics.ins-det↗

arXiv2024

Traceable random numbers from a nonlocal quantum advantage

The unpredictability of random numbers is fundamental to both digital security and applications that fairly distribute resources. However, existing random number generators have limitations-the generation processes cannot be fully traced, audited, and certified to be unpredictable. The algorithmic steps used in pseudorandom number generators are auditable, but they cannot guarantee that their outputs were a priori unpredictable given knowledge of the initial seed. Device-independent quantum random number generators can ensure that the source of randomness was unknown beforehand, but the steps used to extract the randomness are vulnerable to tampering. Here, for the first time, we demonstrate a fully traceable random number generation protocol based on device-independent techniques. Our protocol extracts randomness from unpredictable non-local quantum correlations, and uses distributed intertwined hash chains to cryptographically trace and verify the extraction process. This protocol is at the heart of a public traceable and certifiable quantum randomness beacon that we have launched. Over the first 40 days of operation, we completed the protocol 7434 out of 7454 attempts -- a success rate of 99.7%. Each time the protocol succeeded, the beacon emitted a pulse of 512 bits of traceable randomness. The bits are certified to be uniform with error times actual success probability bounded by $2^{-64}$. The generation of certifiable and traceable randomness represents one of the first public services that operates with an entanglement-derived advantage over comparable classical approaches.

quant-ph↗

arXiv2024

Gated InAs quantum dots embedded in surface acoustic wave cavities for low-noise optomechanics

Self-assembled InAs quantum dots (QDs) are promising optomechanical elements due to their excellent photonic properties and sensitivity to local strain fields. Microwave-frequency modulation of photons scattered from these efficient quantum emitters has been recently demonstrated using surface acoustic wave (SAW) cavities. However, for optimal performance, a gate structure is required to deterministically control the charge state and reduce charge noise of the QDs. Here, we integrate gated QDs and SAW cavities using molecular beam epitaxy and nanofabrication. We demonstrate that with careful design of the substrate layer structure, integration of the two systems can be accomplished while retaining the optimal performance of each subsystem. These results mark a critical step toward efficient and low-noise optomechanical systems for microwave-to-optical quantum transduction.

quant-ph↗

arXiv2024

Precisely determining photon-number in real-time

Superconducting transition-edge sensors (TES) are extremely sensitive microcalorimeters used as photon detectors with unparalleled energy resolution. They have found application from measuring astronomical spectra through to determining the quantum property of photon-number, $\hat{n} {=} \hat{a}^† \hat{a}$, for energies from 0.6-2.33eV. However, achieving optimal energy resolution requires considerable data acquisition -- on the order of 1GB/min -- followed by post-processing, which does not allow access to energy information in real time. Here we use a custom hardware processor to process TES pulses while new detections are still being registered, allowing photon-number to be measured in real time as well as reducing data requirements by orders-of-magnitude. We resolve photon number up to n=16 -- achieving up to parts-per-billion discrimination for low photon numbers on the fly -- providing transformational capacity for applications of TES detectors from astronomy through to quantum technology.

physics.ins-det↗

arXiv2024

Coherent Control of an Optical Quantum Dot Using Phonons and Photons

Genuine quantum-mechanical effects are readily observable in modern optomechanical systems comprising bosonic ("classical") optical resonators. Here we describe unique features and advantages of optical two-level systems, or qubits, for optomechanics. The qubit state can be coherently controlled using both phonons and resonant or detuned photons. We experimentally demonstrate this using charge-controlled InAs quantum dots (QDs) in surface-acoustic-wave resonators. Time-correlated single-photon counting measurements reveal the control of QD population dynamics using engineered optical pulses and mechanical motion. As a first example, at moderate acoustic drive strengths, we demonstrate the potential of this technique to maximize fidelity in quantum microwave-to-optical transduction. Specifically, we tailor the scheme so that mechanically assisted photon scattering is enhanced over the direct detuned photon scattering from the QD. Spectral analysis reveals distinct scattering channels related to Rayleigh scattering and luminescence in our pulsed excitation measurements which lead to time-dependent scattering spectra. Quantum-mechanical calculations show good agreement with our experimental results, together providing a comprehensive description of excitation, scattering and emission in a coupled QD-phonon optomechanical system.

quant-ph↗

arXiv2024

Detecting Light Dark Matter with Kinetic Inductance Detectors

Superconducting detectors are a promising technology for probing dark matter at extremely low masses, where dark matter interactions are currently unconstrained. Realizing the potential of such detectors requires new readout technologies to achieve the lowest possible thresholds for deposited energy. Here we perform a prototype search for dark matter--electron interactions with kinetic inductance detectors (KIDs), a class of superconducting detector originally designed for infrared astronomy applications. We demonstrate that existing KIDs can achieve effective thresholds as low as 0.2 eV, and we use existing data to set new dark matter constraints. The relative maturity of the technology underlying KIDs means that this platform can be scaled significantly with existing tools, enabling powerful new searches in the coming years.

hep-ph↗

arXiv2023

Programmable Superconducting Optoelectronic Single-Photon Synapses with Integrated Multi-State Memory

The co-location of memory and processing is a core principle of neuromorphic computing. A local memory device for synaptic weight storage has long been recognized as an enabling element for large-scale, high-performance neuromorphic hardware. In this work, we demonstrate programmable superconducting synapses with integrated memories for use in superconducting optoelectronic neural systems. Superconducting nanowire single-photon detectors and Josephson junctions are combined into programmable synaptic circuits that exhibit single-photon sensitivity, memory cells with more than 400 internal states, leaky integration of input spike events, and 0.4 fJ programming energies (including cooling power). These results are attractive for implementing a variety of supervised and unsupervised learning algorithms and lay the foundation for a new hardware platform optimized for large-scale spiking network accelerators.

physics.app-ph↗

arXiv2023

Monolithic Integration of Superconducting-Nanowire Single-Photon Detectors with Josephson Junctions for Scalable Single-photon Sensing

We demonstrate superconducting single-photon detectors that integrate signals locally at each pixel. This capability is realized by the monolithic integration of superconducting-nanowire single-photon detectors with Josephson electronics. The motivation is to realize superconducting sensor elements with integrating capabilities similar to their CMOS-sensor counterparts. The pixels can operate in several modes. First, we demonstrate that photons can be counted individually, with each detection event adding an identical amount of supercurrent to an integrating element. Second, we demonstrate an active gain control option, in which the signal added per detection event can be dynamically adjusted to account for variable light conditions. Additionally, the pixels can either retain signal indefinitely to record all counts incurred over an integration period, or the pixels can record a fading signal of detection events within a decay time constant. We describe additional semiconductor readout circuitry that will be used in future work to realize scalable, large-format sensor arrays of superconducting single photon detectors compatible with CMOS array readout architectures.

physics.app-ph↗

arXiv2023

Monolithic Polarizing Circular Dielectric Gratings on Bulk Substrates for Improved Photon Collection from InAs Quantum Dots

III-V semiconductor quantum dots (QDs) are near-ideal and versatile single-photon sources. Because of the capacity for monolithic integration with photonic structures as well as optoelectronic and optomechanical systems, they are proving useful in an increasingly broad application space. Here, we develop monolithic circular dielectric gratings on bulk substrates -- as opposed to suspended or wafer-bonded substrates -- for greatly improved photon collection from InAs quantum dots. The structures utilize a unique two-tiered distributed Bragg reflector (DBR) structure for vertical electric field confinement over a broad angular range. Opposing ``openings" in the cavities induce strongly polarized QD luminescence without harming collection efficiencies. We describe how measured enhancements depend critically on the choice of collection optics. This is important to consider when evaluating the performance of any photonic structure that concentrates farfield emission intensity. Our cavity designs are useful for integrating QDs with other quantum systems that require bulk substrates, such as surface acoustic wave phonons.

physics.optics↗

arXiv2023

A 64-pixel mid-infrared single-photon imager based on superconducting nanowire detectors

A large-format mid-infrared single-photon imager with very low dark count rates would enable a broad range of applications in fields like astronomy and chemistry. Superconducting nanowire single-photon detectors (SNSPDs) are a mature photon-counting technology as demonstrated by their figures of merit. However, scaling SNSPDs to large array sizes for mid-infrared applications requires sophisticated readout architectures in addition to superconducting materials development. In this work, an SNSPD array design that combines a thermally coupled row-column multiplexing architecture with a thermally coupled time-of-flight transmission line was developed for mid-infrared applications. The design requires only six cables and can be scaled to larger array sizes. The demonstration of a 64-pixel array shows promising results for wavelengths between $\mathrm{3.4\,μm}$ and $\mathrm{10\,μm}$, which will enable the use of this single-photon detector technology for a broad range of new applications.

quant-ph↗

arXiv2023

Scalable multiparty steering based on a single pair of entangled qubits

The distribution and verification of quantum nonlocality across a network of users is essential for future quantum information science and technology applications. However, beyond simple point-to-point protocols, existing methods struggle with increasingly complex state preparation for a growing number of parties. Here, we show that, surprisingly, multiparty loophole-free quantum steering, where one party simultaneously steers arbitrarily many spatially separate parties, is achievable by constructing a quantum network from a set of qubits of which only one pair is entangled. Using these insights, we experimentally demonstrate this type of steering between three parties with the detection loophole closed. With its modest and fixed entanglement requirements, this work introduces a scalable approach to rigorously verify quantum nonlocality across multiple parties, thus providing a practical tool towards developing the future quantum internet.

quant-ph↗

arXiv2023

A superconducting-nanowire single-photon camera with 400,000 pixels

For the last 50 years, superconducting detectors have offered exceptional sensitivity and speed for detecting faint electromagnetic signals in a wide range of applications. These detectors operate at very low temperatures and generate a minimum of excess noise, making them ideal for testing the non-local nature of reality, investigating dark matter, mapping the early universe, and performing quantum computation and communication. Despite their appealing properties, however, there are currently no large-scale superconducting cameras - even the largest demonstrations have never exceeded 20 thousand pixels. This is especially true for one of the most promising detector technologies, the superconducting nanowire single-photon detector (SNSPD). These detectors have been demonstrated with system detection efficiencies of 98.0%, sub-3-ps timing jitter, sensitivity from the ultraviolet (250nm) to the mid-infrared (10um), and dark count rates below 6.2e-6 counts per second (cps), but despite more than two decades of development they have never achieved an array size larger than a kilopixel. Here, we report on the implementation and characterization of a 400,000 pixel SNSPD camera, a factor of 400 improvement over the previous state-of-the-art. The array spanned an area 4x2.5 mm with a 5x5um resolution, reached unity quantum efficiency at wavelengths of 370 nm and 635 nm, counted at a rate of 1.1e5 cps, and had a dark count rate of 1e-4 cps per detector (corresponding to 0.13 cps over the whole array). The imaging area contains no ancillary circuitry and the architecture is scalable well beyond the current demonstration, paving the way for large-format superconducting cameras with 100% fill factors and near-unity detection efficiencies across a vast range of the electromagnetic spectrum.

quant-ph↗

arXiv2023

Large active-area superconducting microwire detector array with single-photon sensitivity in the near-infrared

Superconducting nanowire single photon detectors (SNSPDs) are the highest-performing technology for time-resolved single-photon counting from the UV to the near-infrared. The recent discovery of single-photon sensitivity in micrometer-scale superconducting wires is a promising pathway to explore for large active area devices with application to dark matter searches and fundamental physics experiments. We present 8-pixel $1 mm^2$ superconducting microwire single photon detectors (SMSPDs) with $1\,\mathrm{μm}$-wide wires fabricated from WSi and MoSi films of various stoichiometries using electron-beam and optical lithography. Devices made from all materials and fabrication techniques show saturated internal detection efficiency at 1064 nm in at least one pixel, and the best performing device made from silicon-rich WSi shows single-photon sensitivity in all 8 pixels and saturated internal detection efficiency in 6/8 pixels. This detector is the largest reported active-area SMSPD or SNSPD with near-IR sensitivity published to date, and the first report of an SMSPD array. By further optimizing the photolithography techniques presented in this work, a viable pathway exists to realize larger devices with $cm^2$-scale active area and beyond.

physics.ins-det↗