arXiv subjects

Sahil R. Patel

Publications and source records attributed to Sahil R. Patel.

5 recordsLinked to original sources

arXiv2026

Enhanced Mid-Infrared Single-Photon Detection with Antenna-Coupled Superconducting Nanowires

Scaling the photon-detection area of superconducting nanowire single-photon detectors (SNSPDs) has traditionally been achieved by nanowire meandering. However, material inhomogeneities and fabrication-induced defects, such as line-edge roughness, increase with nanowire length, leading to reduced internal photon-detection efficiency and elevated dark-count rates. This trade-off becomes increasingly pronounced as nanowires are scaled to sub-100 nm widths and sub-5 nm thicknesses required for mid- to far-infrared sensitivity. Here, we demonstrate an antenna-coupled SNSPD architecture that enhances the effective photon-detection area without increasing nanowire length. A crossed bowtie antenna integrated with an 80 nm-wide, 3 nm-thick WSi nanowire yields 15.7$\times$ increase in effective detection area at 7.4 $μ$m compared to a bare nanowire of identical geometric footprint, while maintaining the same internal detection efficiency and dark-count rate. Antenna coupling provides a scalable approach to increasing photon-detection area while reducing the noise-equivalent power, offering performance benefits for applications in astronomy, biological imaging, and molecular spectroscopy.

physics.optics↗

arXiv2026

Reaching the intrinsic performance limits of superconducting nanowire single-photon detectors up to 0.1 mm wide

Superconducting nanowire single-photon detectors (SNSPDs) combine high detection efficiency, low noise, and excellent timing resolution, making them a leading platform for photon-counting applications. However, despite decades of materials and fabrication research, detector performance has never been shown to match theoretical performance expectations. Here, we demonstrate for the first time in situ tuning of a detector from its typical, suboptimal operation, to a regime limited only by material quality, allowing the device to reach its intrinsic performance limit. Our approach is based on current-biased superconducting "rails" placed on either side of the detector that redistribute current across its width to achieve its peak performance. This technique reduces the dark count rate by ten orders of magnitude. Further, we show operation at this intrinsic performance limit for devices up to 0.1 mm wide, and also demonstrate near-unity internal detection efficiency (IDE) at a wavelength of 4um for a 20um-wide detector--a factor of 20 wider than the current state of the art. This work enables future detectors to overcome the Pearl limit for device width, paving the way for arbitrarily large detectors.

cond-mat.supr-con↗

arXiv2026

Tungsten Germanide Superconducting Nanowire Single-Photon Detectors with Saturated Internal Detection Efficiency at Wavelengths up to 29 μm

Superconducting nanowire single-photon detectors (SNSPDs) are among the most sensitive single-photon detectors available and have the potential to transform fields ranging from infrared astrophysics to molecular spectroscopy. However, extending their performance into the mid-infrared spectral region - crucial for applications such as exoplanet transit spectroscopy and vibrational fingerprinting of molecules - has remained a major challenge, primarily due to material limitations and scalability constraints. Here, we report on the development of SNSPDs based on tungsten germanide, a novel material system that combines high mid-infrared sensitivity with compatibility for large-scale fabrication. Our detectors exhibit saturated internal detection efficiency at wavelengths up to 29 μm, while using 2.7x thicker films (8 nm vs 3 nm) and up to 4.5x wider nanowires (360 nm vs 80 nm) compared to mid-infrared-optimized SNSPDs fabricated from tungsten silicide. This advance will enable scalable, high-performance single-photon detection in a spectral region that was previously inaccessible, opening new frontiers in remote sensing, thermal imaging, environmental monitoring, molecular physics, and astronomy.

physics.ins-det↗

arXiv2024

Improvements of readout signal integrity in mid-infrared superconducting nanowire single photon detectors

Superconducting nanowire single-photon detectors (SNSPDs) with high timing resolution and low background counts in the mid infrared (MIR) have the potential to open up numerous opportunities in fields such as exoplanet searches, direct dark matter detection, physical chemistry, and remote sensing. One challenge in pushing SNSPD sensitivity to the MIR is a decrease in the signal-to-noise ratio (SNR) of the readout signal as the critical currents become increasingly smaller. We overcome this trade-off with a new device architecture that employs impedance matching tapers and superconducting nanowire avalanche photodetectors to demonstrate increased SNR while maintaining saturated internal detection efficiency at 7.4 μm and getting close to saturation at 10.6 μm. This work provides a novel platform for pushing SNSPD sensitivity to longer wavelengths while improving the scalability of the readout electronics.

physics.ins-det↗

arXiv2023

Low-noise single-photon counting superconducting nanowire detectors at infrared wavelengths up to 29 $μ$m

We report on the extension of the spectral sensitivity of superconducting nanowire single-photon detectors to a wavelength of 29 $μ$m. This represents the first demonstration of a time correlated single-photon counting detector at these long infrared wavelengths. We achieve saturated internal detection efficiency from 10 to 29 $μ$m, whilst maintaining dark count rates below 0.1 counts per second. Extension of superconducting nanowire single-photon detectors to this spectral range provides low noise and high timing resolution photon counting detection, effectively providing a new class of single-photon sensitive detector for these wavelengths. These detectors are important for applications such as exoplanet spectroscopy, infrared astrophysics, physical chemistry, remote sensing and direct dark-matter detection.

quant-ph↗