arXiv subjects

Sal J. Bosman

Publications and source records attributed to Sal J. Bosman.

7 recordsLinked to original sources

arXiv2017

Convergence of the multimode quantum Rabi model of circuit quantum electrodynamics

Circuit quantum electrodynamics (QED) studies the interaction of artificial atoms, open transmission lines and electromagnetic resonators fabricated from superconducting electronics. While the theory of an artificial atom coupled to one mode of a resonator is well studied, considering multiple modes leads to divergences which are not well understood. Here, we introduce a first-principles model of a multimode resonator coupled to a Josephson junction atom. Studying the model in the absence of any cutoff, in which the coupling rate to mode number $n$ scales as $\sqrt{n}$ for $n$ up to $\infty$, we find that quantities such as the Lamb shift do not diverge due to a natural rescaling of the bare atomic parameters that arises directly from the circuit analysis. Introducing a cutoff in the coupling from a non-zero capacitance of the Josephson junction, we provide a physical interpretation of the decoupling of higher modes in the context of circuit analysis. In addition to explaining the convergence of the quantum Rabi model with no cutoff, our work also provides a useful framework for analyzing the ultra-strong coupling regime of multimode circuit QED.

quant-ph↗

arXiv2017

Incorporation of a dc bias in a high-Q 3d microwave cavity

We report a technique for applying a dc bias in a 3d microwave cavity. This is achieved by isolating the two halves of the cavity with a dielectric and directly using them as dc electrodes. By embedding a variable capacitance diode in the cavity, we tune the resonant frequency with a dc voltage at room temperature, demonstrating the introduction of a dc bias into the 3d cavity without compromising its high quality factor.

cond-mat.mes-hall↗

arXiv2017

A split-cavity design for the incorporation of a DC bias in a 3D microwave cavity

We report on a technique for applying a DC bias in a 3D microwave cavity. We achieve this by isolating the two halves of the cavity with a dielectric and directly using them as DC electrodes. As a proof of concept, we embed a variable capacitance diode in the cavity and tune the resonant frequency with a DC voltage, demonstrating the incorporation of a DC bias into the 3D cavity with no measurable change in its quality factor at room temperature. We also characterize the architecture at millikelvin temperatures and show that the split cavity design maintains a quality factor $Q_\text{i} \sim 8.8 \times 10^5$, making it promising for future quantum applications.

cond-mat.mes-hall↗

arXiv2017

Multi-mode ultra-strong coupling in circuit quantum electrodynamics

With the introduction of superconducting circuits into the field of quantum optics, many novel experimental demonstrations of the quantum physics of an artificial atom coupled to a single-mode light field have been realized. Engineering such quantum systems offers the opportunity to explore extreme regimes of light-matter interaction that are inaccessible with natural systems. For instance the coupling strength $g$ can be increased until it is comparable with the atomic or mode frequency $ω_{a,m}$ and the atom can be coupled to multiple modes which has always challenged our understanding of light-matter interaction. Here, we experimentally realize the first Transmon qubit in the ultra-strong coupling regime, reaching coupling ratios of $g/ω_{m}=0.19$ and we measure multi-mode interactions through a hybridization of the qubit up to the fifth mode of the resonator. This is enabled by a qubit with 88% of its capacitance formed by a vacuum-gap capacitance with the center conductor of a coplanar waveguide resonator. In addition to potential applications in quantum information technologies due to its small size and localization of electric fields in vacuum, this new architecture offers the potential to further explore the novel regime of multi-mode ultra-strong coupling.

quant-ph↗

arXiv2017

Approaching ultra-strong coupling in Transmon circuit-QED using a high-impedance resonator

In this experiment, we couple a superconducting Transmon qubit to a high-impedance $645\ Ω$ microwave resonator. Doing so leads to a large qubit-resonator coupling rate $g$, measured through a large vacuum Rabi splitting of $2g\simeq 910$ MHz. The coupling is a significant fraction of the qubit and resonator oscillation frequencies $ω$, placing our system close to the ultra-strong coupling regime ($\bar{g}=g/ω=0.071$ on resonance). Combining this setup with a vacuum-gap Transmon architecture shows the potential of reaching deep into the ultra-strong coupling $\bar{g} \sim 0.45$ with Transmon qubits.

quant-ph↗

arXiv2015

Broadband architecture for galvanically accessible superconducting microwave resonators

In many hybrid quantum systems, a superconducting circuit is required that combines DC-control with a coplanar waveguide (CPW) microwave resonator. The strategy thus far for applying a DC voltage or current bias to microwave resonators has been to apply the bias through a symmetry point in such a way that it appears as an open circuit for certain frequencies. Here, we introduce a microwave coupler for superconducting CPW cavities in the form of a large shunt capacitance to ground. Such a coupler acts as a broadband mirror for microwaves while providing galvanic connection to the center conductor of the resonator. We demonstrate this approach with a two-port $λ/4$-transmission resonator with linewidths in the MHz regime ($Q\sim10^3$) that shows no spurious resonances and apply a voltage bias up to $80$ V without affecting the quality factor of the resonator. This resonator coupling architecture, which is simple to engineer, fabricate and analyse, could have many potential applications in experiments involving superconducting hybrid circuits.

cond-mat.mes-hall↗

arXiv2014

Molybdenum-Rhenium alloy based high-$Q$ superconducting microwave resonators

Superconducting microwave resonators (SMR) with high quality factors have become an important technology in a wide range of applications. Molybdenum-Rhenium (MoRe) is a disordered superconducting alloy with a noble surface chemistry and a relatively high transition temperature. These properties make it attractive for SMR applications, but characterization of MoRe SMR has not yet been reported. Here, we present the fabrication and characterization of SMR fabricated with a MoRe 60-40 alloy. At low drive powers, we observe internal quality-factors as high as 700,000. Temperature and power dependence of the internal quality-factors suggest the presence of the two level systems from the dielectric substrate dominating the internal loss at low temperatures. We further test the compatibility of these resonators with high temperature processes such as for carbon nanotube CVD growth, and their performance in the magnetic field, an important characterization for hybrid systems.

cond-mat.mes-hall↗