arXiv subjects

Salvador Barraza-Lopez

Publications and source records attributed to Salvador Barraza-Lopez.

At least 37 records · Page 2Linked to original sources

arXiv2020

Microscopic manipulation of ferroelectric domains in SnSe monolayers at room temperature

Two-dimensional (2D) van der Waals ferroelectrics provide an unprecedented architectural freedom for the creation of artificial multiferroics and non-volatile electronic devices based on vertical and co-planar heterojunctions of 2D ferroic materials. Nevertheless, controlled microscopic manipulation of ferroelectric domains is still rare in monolayer-thick 2D ferroelectrics with in-plane polarization. Here we report the discovery of robust ferroelectricity with a critical temperature close to 400 K in SnSe monolayer plates grown on graphene, and the demonstration of controlled room temperature ferroelectric domain manipulation by applying appropriate bias voltage pulses to the tip of a scanning tunneling microscope (STM). This study shows that STM is a powerful tool for detecting and manipulating the microscopic domain structures in 2D ferroelectric monolayers, which is difficult for conventional approaches such as piezoresponse force microscopy, thus facilitating the hunt for other 2D ferroelectric monolayers with in-plane polarization with important technological applications.

cond-mat.mtrl-sci↗

arXiv2020

Tuning energy barriers by doping 2D group-IV monochalcogenides

Structural degeneracies underpin the ferroic behavior of next-generation two-dimensional materials, and lead to peculiar two-dimensional structural transformations under external fields, charge doping and/or temperature. The most direct indicator of the ease of these transformations is an {\em elastic energy barrier}, defined as the energy difference between the (degenerate) structural ground state unit cell, and a unit cell with an increased structural symmetry. Proximity of a two-dimensional material to a bulk substrate can affect the magnitude of the critical fields and/or temperature at which these transformations occur, with the first effect being a relative charge transfer, which could trigger a structural quantum phase transition. With this physical picture in mind, we report the effect of modest charge doping (within $-0.2$ and $+0.2$ electrons per unit cell) on the elastic energy barrier of ferroelastic black phosphorene and nine ferroelectric monochalcogenide monolayers. The elastic energy barrier $J_s$ is the energy needed to create a $Pnm2_1\to P4/nmm$ two-dimensional structural transformation. Similar to the effect on the elastic energy barrier of ferroelastic SnO monolayers, group-IV monochalcogenide monolayers show a tunable elastic energy barrier for similar amounts of doping: a decrease (increase) of $J_s$ can be engineered under a modest hole (electron) doping of no more than one tenth of an electron or a hole per atom.

cond-mat.mes-hall↗

arXiv2020

Topology of atomically thin soft ferroelectric membranes at finite temperature

One account of two-dimensional (2D) structural transformations in 2D ferroelectrics predicts an evolution from a structure with Pnm2$_1$ symmetry into a structure with square P4/nmm symmetry and is consistent with experimental evidence, while another argues for a transformation into a structure with rectangular Pnmm symmetry. An analysis of the assumptions made in these models is provided here, and six fundamental results concerning these transformations are contributed as follows: (i) Softened phonon modes produce rotational modes in these materials. (ii) The transformation to a structure with P4/nmm symmetry occurs at the lowest critical temperature $T_c$. (iii) The hypothesis that one unidirectional optical vibrational mode underpins the 2D transformation is unwarranted. (iv) Being successively more constrained, a succession of critical temperatures ($T_c<T_c'<T_c''$) occurs in going from molecular dynamics calculations with the NPT and NVT ensembles onto the model with unidirectional oscillations. (v) The choice of exchange-correlation functional impacts the estimate of the critical temperature. (vi) Crucially, the correct physical picture of these transformations is one in which rotational modes confer a topological character to the 2D transformation via the proliferation of vortices.

cond-mat.soft↗

arXiv2019

Group-IV monochalcogenide monolayers: two-dimensional ferroelectrics with weak intra-layer bonds and a phosphorene-like monolayer dissociation energy

We performed density functional theory calculations with self-consistent van der Waals corrected exchange-correlation (XC) functionals to capture the structure of black phosphorus and twelve monochalcogenide monolayers and find the following results: (a) The in-plane unit cell changes its area in going from the bulk to a monolayer. The change of in-plane distances implies that bonds weaker than covalent or ionic ones are at work within the monolayers themselves. This observation is relevant for the prediction of the critical temperature $T_c$. (b) There is a hierarchy of independent parameters that uniquely define a ground state ferroelectric unit cell (and square and rectangular paraelectric unit cells as well): only 5 optimizable parameters are needed to establish the unit cell vectors and the four basis vectors of the ferroelectric ground state unit cell, while square and rectangular paraelectric structures are defined by only 3 or 2 independent optimizable variables, respectively. (c) The reduced number of independent structural variables correlates with larger elastic energy barriers on a rectangular paraelectric unit cell when compared to the elastic energy barrier of a square paraelectric structure. This implies that $T_c$ obtained on a structure that keeps the lattice parameters fixed (for example, using an NVT ensemble) should be larger than the transition temperature on a structure that is allowed to change in-plane lattice vectors (for example, using the NPT ensemble). (d) The dissociation energy (bulk cleavage energy) of these materials is similar to the energy required to exfoliate graphite and MoS$_2$. (e) There exists a linear relation among the square paraelectric unit cell lattice parameter and the lattice parameters of the rectangular ferroelectric ground state unit cell. These results highlight the subtle atomistic structure of these novel 2D ferroelectrics.

cond-mat.mes-hall↗

arXiv2019

Injection current in ferroelectric group-IV monochalcogenide monolayers

We study the injection current response tensor (also known as circular photogalvanic effect or ballistic current) in ferrolectric monolayer GeS, GeSe, SnS, and SnSe. We find that the injection current is perpendicular to the spontaneous in-plane polarization and could reach peak (bulk) values of the order of $10^{10}$A/V$^{2}$s in the visible spectrum. The magnitude of the injection current is the largest reported in the literature to date for a two dimensional material. To rationalize the large injection current, we correlate the injection current spectrum with the joint density of states, electric polarization, strain, etc. We find that various factors such as anisotropy, in-plane polarization and wave function delocalization are important in determining the injection current tensor in these materials. We also find that compression along the polar axis can increase the injection current (or change its sign), and hence strain can be an effective control knob for their nonlinear optical response. Conversely, the injection current can be a sensitive probe of the crystal structure.

cond-mat.mes-hall↗

arXiv2019

From atomic layer to the bulk: low-temperature atomistic structure, ferroelectric and electronic properties of SnTe films

SnTe hosts ferroelectricity that competes with its weak non-trivial band topology: in the high-symmetry rocksalt structure--in which its intrinsic electric dipole is quenched--this material develops metallic surface bands, but in its rhombic ground-state configuration--that hosts a non-zero spontaneous electric dipole--the crystalline symmetry is lowered and the presence of surface electronic bands is not guaranteed. Here, the type of ferroelectric coupling and the atomistic and electronic structure of SnTe films ranging from 2 to 40 ALs are examined on freestanding samples, to which atomic layers were gradually added. 4 AL SnTe films are antiferroelectrically-coupled, while thicker freestanding SnTe films are ferroelectrically-coupled. The electronic band gap reduces its magnitude in going from 2 ALs to 40 ALs but it does not close due to the rhombic nature of the structure. These results bridge the structure of SnTe films from the monolayer to the bulk.

cond-mat.mes-hall↗

arXiv2019

Evolution of elastic moduli through a two-dimensional structural transformation

We use a classical analytical and separable elastic energy landscape describing SnO monolayers to estimate the softening of elastic moduli through a mechanical instability occurring at finite temperature in this material. Although not strictly applicable to this material due to its low energy barrier $J$ that leads to a quantum paraelastic phase, the present exercise is relevant as it establishes a conceptual procedure to estimate such moduli straight from a two-dimensional elastic energy landscape. As additional support for the existence of a quantum paraelastic phase, we carry a qualitative WKB analysis to estimate escape times from an individual well on the landscape; escape times increase exponentially with the height of the barrier $J$. We also provide arguments against an additional transformation onto a planar lattice due to its high energy cost. These results continue to establish a case for the usefulness of soft matter concepts in two-dimensional materials, and of the potential lurking of quantum effects into soft matter.

cond-mat.soft↗

arXiv2018

Quantum paraelastic two-dimensional materials

We study the elastic energy landscape of two-dimensional tin oxide (SnO) monolayers and demonstrate a transition temperature of $T_c=8.5\pm 1.8$ K using ab-initio molecular dynamics (MD), that is close to the value of the elastic energy barrier $J$ derived from $T=0$ K density functional theory calculations. The power spectra of the velocity autocorrelation throughout the MD evolution permits identifying soft phonon modes likely responsible for the structural transformation. The mean atomic displacements obtained from a Bose-Einstein occupation of the phonon modes suggest the existence of a quantum paraelastic phase that could be tuned with charge doping: SnO monolayers could be 2D quantum paraelastic materials with a charge-tunable quantum phase transition.

cond-mat.mes-hall↗

arXiv2018

Water splits to degrade two-dimensional group-IV monochalcogenides in nanoseconds

The experimental exfoliation of layered group-IV monochalcogenides --semiconductors isostructural to black phosphorus-- using processes similar to those followed in the production of graphene or phosphorene has turned out unsuccessful thus far, as if the chemical degradation observed in black phosphorus was aggravated in these monochalcogenides. Here, we document a facile dissociation of water by these materials within ten nanoseconds from room-temperature Car-Parrinello molecular dynamics calculations under standard temperature and pressure conditions. These results suggest that humidity must be fully eradicated to exfoliate monolayers successfully, for instance, by placing samples in a hydrophobic solution during mechanical exfoliation. From another materials perspective, these two-dimensional materials that create individual hydrogen ions out of water without illumination may become relevant for applications in hydrogen production and storage.

cond-mat.mtrl-sci↗

arXiv2018

Exfoliation energy, quasi-particle bandstructure, and excitonic properties of selenium and tellurium atomic chains

Effects that are not captured by the generalized-gradient density-functional theory play a prominent effect on the structural binding, and on the electronic and optical properties of reduced-dimensional and weakly-bound materials. Here, we report the exfoliation energy of selenium and tellurium atomic chains with non-empirical van der Waals corrections, and their electronic and optical properties with the GW and Bethe-Salpeter formalisms. The exfoliation energy is found to be within 0.547 to 0.719 eV/u.c. for the selenium atomic chain, and 0.737 to 0.926 eV/u.c. for the tellurium atomic chain (u.c. stands for unit cell), depending on the approximation for the van der Waals interaction and the numerical tool chosen. The GW electronic bandgap turned out to be 5.22--5.47 (4.44--4.59) eV for the Se (Te) atomic chains, with the lowest bound obtained with the Godby-Needs (GB), and the upper bound to the Hybertsen-Louie (HL) plasmon-pole models (PPMs). The binding energy of the ground-state excitonic state ranges between 2.69 to 2.72 eV for selenium chains within the HL and GB PPM, respectively, and turned out to be 2.35 eV for tellurium chains with both approximations. The ground state excitonic wave function is localized within 50 Å along the axis for both types of atomic chains, and its energy lies within the visible spectrum: blue [2.50(GN)--2.78(HL) eV] for selenium, and yellow--green [2.09(GN)--2.28(HL) eV] for tellurium, which could be useful for LED applications in the visible spectrum.

cond-mat.mes-hall↗

arXiv2017

Tuning the ferro- to para-electric transition temperature and dipole orientation of group-IV monochalcogenide monolayers

Coordination-related, two-dimensional (2D) structural phase transitions are a fascinating and novel facet of two-dimensional materials with structural degeneracies. Nevertheless, a unified theoretical account of these transitions remains absent, and the following points are established through {\em ab-initio} molecular dynamics and 2D discrete clock models here: Group-IV monochalcogenide (GeSe, SnSe, SnTe, ...) monolayers have four degenerate structural ground states, and a 2D phase transition from a three-fold coordinated onto a five-fold coordinated structure takes place at finite temperature. On unstrained samples, the 2D phase transition requires lattice parameters to freely evolve. A fundamental energy scale permits understanding this transition. The transition temperature $T_c$ and the orientation of the in-plane intrinsic electric dipole can be controlled by moderate uniaxial tensile strain, and a modified discrete clock model describes the transition on strained samples. These results establish a general underlying theoretical background to understand structural phase transitions in 2D materials and their effects on material properties.

cond-mat.mes-hall↗

arXiv2017

Layered material GeSe and vertical GeSe/MoS2 p-n heterojunctions

Group-IV monochalcogenides are emerging as a new class of layered materials beyond graphene, transition metal dichalcogenides (TMDCs), and black phosphorus (BP). In this paper, we report experimental and theoretical investigations of the band structure and transport properties of GeSe and its heterostructures. We find that GeSe exhibits a markedly anisotropic electronic transport, with maximum conductance along the armchair direction. Density functional theory calculations reveal that the effective mass is 2.7 times larger along the zigzag direction than the armchair direction; this mass anisotropy explains the observed anisotropic conductance. The crystallographic orientation of GeSe is confirmed by angleresolved polarized Raman measurements, which are further supported by calculated Raman tensors for the orthorhombic structure. Novel GeSe/MoS2 p-n heterojunctions are fabricated, combining the natural p-type doping in GeSe and n-type doping in MoS2. The temperature dependence of the measured junction current reveals that GeSe and MoS2 have a type-II band alignment with a conduction band offset of ~0.234 eV. The anisotropic conductance of GeSe may enable the development of new electronic and optoelectronic devices, such as high-efficiency thermoelectric devices and plasmonic devices with resonance frequency continuously tunable through light polarization direction. The unique GeSe/MoS2 p-n junctions with type-II alignment may become essential building blocks of vertical tunneling field-effect transistors for low-power applications. The novel p-type layered material GeSe can also be combined with n-type TMDCs to form heterogeneous complementary metal oxide semiconductor (CMOS) circuits.

cond-mat.mes-hall↗

arXiv2017

Electronic and optical properties of strained graphene and other strained 2D materials: a review

This review presents the state of the art in strain and ripple-induced effects on the electronic and optical properties of graphene. It starts by providing the crystallographic description of mechanical deformations, as well as the diffraction pattern for different kinds of representative deformation fields. Then, the focus turns to the unique elastic properties of graphene, and to how strain is produced. Thereafter, various theoretical approaches used to study the electronic properties of strained graphene are examined, discussing the advantages of each. These approaches provide a platform to describe exotic properties, such as a fractal spectrum related with quasicrystals, a mixed Dirac-Schrödinger behavior, emergent gravity, topological insulator states, in molecular graphene and other 2D discrete lattices. The physical consequences of strain on the optical properties are reviewed next, with a focus on the Raman spectrum. At the same time, recent advances to tune the optical conductivity of graphene by strain engineering are given, which open new paths in device applications. Finally, a brief review of strain effects in multilayered graphene and other promising 2D materials like silicene and materials based on other group-IV elements, phosphorene, dichalcogenide- and monochalcogenide-monolayers is presented, with a brief discussion of interplays among strain, thermal effects, and illumination in the latter material family.

cond-mat.mes-hall↗

arXiv2017

Photostrictive two-dimensional materials in the monochalcogenide family

Photostriction is predicted for SnS and SnSe monolayers, two-dimensional ferroelectrics with rectangular unit cells (the lattice vector $\mathbf{a}_1$ is larger than $\mathbf{a}_2$) and an intrinsic dipole moment parallel to $\mathbf{a}_1$. Photostriction in these two-dimensional materials is found to be induced by a screened electric polarization in the photoexcited electronic state (i.e., a converse piezoelectric effect) that leads to a compression of $a_1$ and a comparatively smaller increase of $a_2$ for a reduced unit cell area. The structural change documented here is ten times larger than that observed in BiFeO$_3$, making monochalcogenide monolayers an ultimate platform for this effect. This structural modification should be observable under experimentally feasible densities of photexcited carriers on samples that have been grown already, having a potential usefulness for light-induced, remote mechano-opto-electronic applications.

cond-mat.mes-hall↗

arXiv2016

Structural phase transition and material properties of few-layer monochalcogenides

GeSe and SnSe monochalcogenide monolayers and bilayers undergo a two-dimensional phase transition from a rectangular unit cell to a square unit cell at a temperature $T_c$ well below the melting point. Its consequences on material properties are studied within the framework of Car-Parrinello molecular dynamics and density-functional theory. No in-gap states develop as the structural transition takes place, so that these phase-change materials remain semiconducting below and above $T_c$. As the in-plane lattice transforms from a rectangle onto a square at $T_c$, the electronic, spin, optical, and piezo-electric properties dramatically depart from earlier predictions. Indeed, the $Y-$ and $X-$points in the Brillouin zone become effectively equivalent at $T_c$, leading to a symmetric electronic structure. The spin polarization at the conduction valley edge vanishes, and the hole conductivity must display an anomalous thermal increase at $T_c$. The linear optical absorption band edge must change its polarization as well, making this structural and electronic evolution verifiable by optical means. Much excitement has been drawn by theoretical predictions of giant piezo-electricity and ferroelectricity in these materials, and we estimate a pyroelectric response of about $3\times 10^{-12}$ $C/K m$ here. These results uncover the fundamental role of temperature as a control knob for the physical properties of few-layer group-IV monochalcogenides

cond-mat.mtrl-sci↗

arXiv2016

Two-dimensional disorder in black phosphorus and monochalcogenide monolayers

Ridged, orthorhombic two-dimensional atomic crystals with a bulk {\em Pnma} structure such as black phosphorus and monochalcogenide monolayers are an exciting and novel material platform for a host of applications. Key to their crystallinity, monolayers of these materials have a four-fold degenerate structural ground state, and a single energy scale $E_C$ (representing the elastic energy required to switch the longer lattice vector along the $x-$ or $y-$direction) determines how disordered these monolayers are at finite temperature. Disorder arises when nearest neighboring atoms become gently reassigned as the system is thermally excited beyond a critical temperature $T_c$ that is proportional to $E_C/k_B$. $E_C$ is tunable by chemical composition and it leads to a classification of these materials into two categories: (i) Those for which $E_C\ge k_BT_m$, and (ii) those having $k_BT_m>E_C\ge 0$, where $T_m$ is a given material's melting temperature. Black phosphorus and SiS monolayers belong to category (i): these materials do not display an intermediate order-disorder transition and melt directly. All other monochalcogenide monolayers with $E_C>0$ belonging to class (ii) will undergo a two-dimensional transition prior to melting. $E_C/k_B$ is slightly larger than room temperature for GeS and GeSe, and smaller than 300 K for SnS and SnSe monolayers, so that these materials transition near room temperature. The onset of this generic atomistic phenomena is captured by a planar Potts model up to the order-disorder transition. The order-disorder phase transition in two dimensions described here is at the origin of the {\em Cmcm} phase being discussed within the context of bulk layered SnSe.

cond-mat.mes-hall↗

arXiv2015

Preserving the 7x7 surface reconstruction of clean Si(111) by graphene adsorption

We employ room-temperature ultrahigh vacuum scanning tunneling microscopy (UHV STM) and {\em ab-initio} calculations to study graphene flakes that were adsorbed onto the Si(111)$-$7$\times$7 surface. The characteristic 7$\times$7 reconstruction of this semiconductor substrate can be resolved through graphene at all scanning biases, thus indicating that the atomistic configuration of the semiconducting substrate is not altered upon graphene adsorption. Large-scale {\em ab-initio} calculations confirm these experimental observations and point to a lack of chemical bonding among interfacial graphene and silicon atoms. Our work provides insight into atomic-scale chemistry between graphene and highly-reactive surfaces, directing future passivation and chemical interaction work in graphene-based heterostructures.

cond-mat.mtrl-sci↗

arXiv2015

Intrinsic defects, fluctuations of the local shape, and the photo-oxidation of black phosphorus

Black phosphorus is a monoatomic semiconducting layered material that degrades exothermically in the presence of light and ambient contaminants. Its degradation dynamics remain largely unknown. Even before degradation, local-probe studies indicate non-negligible local curvature --through a non-constant height distribution-- due to the unavoidable presence of intrinsic defects. We establish that these intrinsic defects are photo-oxidation sites because they lower the chemisorption barrier of ideal black phosphorus (> 10 eV and out of visible-range light excitations) right into the visible and ultra-violet range (1.6 to 6.8 eV), thus enabling photo-induced oxidation and dissociation of oxygen dimers. A full characterization of the material's shape and of its electronic properties at the early stages of the oxidation process is presented as well. This study thus provides fundamental insights into the degradation dynamics of this novel layered material.

cond-mat.mtrl-sci↗