arXiv subjects

Salvatore Pontarelli

Publications and source records attributed to Salvatore Pontarelli.

12 recordsLinked to original sources

arXiv2026

NET4EXA: Pioneering the Future of Interconnects for Supercomputing and AI

NET4EXA aims to develop a next-generation high-performance interconnect for HPC and AI systems, addressing the increasing demands of large-scale infrastructures, such as those required for training Large Language Models. Building upon the proven BXI (Bull eXascale Interconnect) European technology used in TOP15 supercomputers, NET4EXA will deliver the new BXI release, BXIv3, a complete hardware and software interconnect solution, including switch and network interface components. The project will integrate a fully functional pilot system at TRL 8, ready for deployment into upcoming exascale and post-exascale systems from 2025 onward. Leveraging prior research from European initiatives like RED-SEA, the previous achievements of consortium partners and over 20 years of expertise from BULL, NET4EXA also lays the groundwork for the future generation of BXI, BXIv4, providing analysis and preliminary design. The project will use a hybrid development and co-design approach, combining commercial switch technology with custom IP and FPGA-based NICs. Performances of NET4EXA BXIv3 interconnect will be evaluated using a broad portfolio of benchmarks, scientific scalable applications, and AI workloads.

cs.NI↗

arXiv2021

Metronome: adaptive and precise intermittent packet retrieval in DPDK

The increasing performance requirements of modern applications place a significant burden on software-based packet processing. Most of today's software input/output accelerations achieve high performance at the expense of reserving CPU resources dedicated to continuously poll the Network Interface Card. This is specifically the case with DPDK (Data Plane Development Kit), probably the most widely used framework for software-based packet processing today. The approach presented in this paper, descriptively called Metronome, has the dual goals of providing CPU utilization proportional to the load, and allowing flexible sharing of CPU resources between I/O tasks and applications. Metronome replaces DPDK's continuous polling with an intermittent sleep&wake mode, and revolves around a new multi-threaded operation, which improves service continuity. Since the proposed operation trades CPU usage with buffering delay, we propose an analytical model devised to dynamically adapt the sleep&wake parameters to the actual traffic load, meanwhile providing a target average latency. Our experimental results show a significant reduction of the CPU cycles, improvements in power usage, and robustness to CPU sharing even when challenged with CPU-intensive applications.

cs.NI↗

arXiv2020

hXDP: Efficient Software Packet Processing on FPGA NICs

FPGA accelerators on the NIC enable the offloading of expensive packet processing tasks from the CPU. However, FPGAs have limited resources that may need to be shared among diverse applications, and programming them is difficult. We present a solution to run Linux's eXpress Data Path programs written in eBPF on FPGAs, using only a fraction of the available hardware resources while matching the performance of high-end CPUs. The iterative execution model of eBPF is not a good fit for FPGA accelerators. Nonetheless, we show that many of the instructions of an eBPF program can be compressed, parallelized or completely removed, when targeting a purpose-built FPGA executor, thereby significantly improving performance. We leverage that to design hXDP, which includes (i) an optimizing-compiler that parallelizes and translates eBPF bytecode to an extended eBPF Instruction-set Architecture defined by us; a (ii) soft-CPU to execute such instructions on FPGA; and (iii) an FPGA-based infrastructure to provide XDP's maps and helper functions as defined within the Linux kernel. We implement hXDP on an FPGA NIC and evaluate it running real-world unmodified eBPF programs. Our implementation is clocked at 156.25MHz, uses about 15% of the FPGA resources, and can run dynamically loaded programs. Despite these modest requirements, it achieves the packet processing throughput of a high-end CPU core and provides a 10x lower packet forwarding latency.

cs.AR↗

arXiv2018

CuCoTrack: Cuckoo Filter Based Connection Tracking

This paper introduces CuCoTrack, a cuckoo hash based data structure designed to efficiently implement connection tracking. The proposed scheme exploits the fact that queries always match one existing connection to compress the 5-tuple that identifies the connection. This reduces significantly the amount of memory needed to store the connections and also the memory bandwidth needed for lookups. CuCoTrack uses a dynamic fingerprint to avoid collisions thus ensuring that queries are completed in at most two memory accesses and facilitating a hardware implementation. The proposed scheme has been analyzed theoretically and validated by simulation. The results show that using 16 bits for the fingerprint is enough to avoid collisions in practical configurations.

cs.DS↗

arXiv2017

Adaptive Cuckoo Filters

We introduce the adaptive cuckoo filter (ACF), a data structure for approximate set membership that extends cuckoo filters by reacting to false positives, removing them for future queries. As an example application, in packet processing queries may correspond to flow identifiers, so a search for an element is likely to be followed by repeated searches for that element. Removing false positives can therefore significantly lower the false positive rate. The ACF, like the cuckoo filter, uses a cuckoo hash table to store fingerprints. We allow fingerprint entries to be changed in response to a false positive in a manner designed to minimize the effect on the performance of the filter. We show that the ACF is able to significantly reduce the false positive rate by presenting both a theoretical model for the false positive rate and simulations using both synthetic data sets and real packet traces.

cs.DS↗

arXiv2017

EMOMA: Exact Match in One Memory Access

An important function in modern routers and switches is to perform a lookup for a key. Hash-based methods, and in particular cuckoo hash tables, are popular for such lookup operations, but for large structures stored in off-chip memory, such methods have the downside that they may require more than one off-chip memory access to perform the key lookup. Although the number of off-chip memory accesses can be reduced using on-chip approximate membership structures such as Bloom filters, some lookups may still require more than one off-chip memory access. This can be problematic for some hardware implementations, as having only a single off-chip memory access enables a predictable processing of lookups and avoids the need to queue pending requests. We provide a data structure for hash-based lookups based on cuckoo hashing that uses only one off-chip memory access per lookup, by utilizing an on-chip pre-filter to determine which of multiple locations holds a key. We make particular use of the flexibility to move elements within a cuckoo hash table to ensure the pre-filter always gives the correct response. While this requires a slightly more complex insertion procedure and some additional memory accesses during insertions, it is suitable for most packet processing applications where key lookups are much more frequent than insertions. An important feature of our approach is its simplicity. Our approach is based on simple logic that can be easily implemented in hardware, and hardware implementations would benefit most from the single off-chip memory access per lookup.

cs.DS↗

arXiv2017

Relaxing state-access constraints in stateful programmable data planes

Supporting the programming of stateful packet forwarding functions in hardware has recently attracted the interest of the research community. When designing such switching chips, the challenge is to guarantee the ability to program functions that can read and modify data plane's state, while keeping line rate performance and state consistency. Current state-of-the-art designs are based on a very conservative all-or-nothing model: programmability is limited only to those functions that are guaranteed to sustain line rate, with any traffic workload. In effect, this limits the maximum time to execute state update operations. In this paper, we explore possible options to relax these constraints by using simulations on real traffic traces. We then propose a model in which functions can be executed in a larger but bounded time, while preventing data hazards with memory locking. We present results showing that such flexibility can be supported with little or no throughput degradation.

cs.NI↗

arXiv2017

Relaxing constraints in stateful network data plane design

Supporting programmable states in the data plane of a forwarding element, e.g., a switch or a NIC, has recently attracted the interest of the research community, which is now looking for the right abstraction to enable the programming of stateful network functions in hardware at line rate. We challenge the conservative assumptions of state-of-the-art abstractions in this field, e.g. always assuming minimum size packets arriving back-to-back. Using trace-based simulations we show that by making more realistic assumptions on the traffic characteristics, e.g. larger average packet size, we can relax the design constraints that currently limit the set of functions that can be implemented at line rate, allowing for more complex functions, with no harm for performance.

cs.NI↗

arXiv2016

Towards a Stateful Forwarding Abstraction to Implement Scalable Network Functions in Software and Hardware

An effective packet processing abstraction that leverages software or hardware acceleration techniques can simplify the implementation of high-performance virtual network functions. In this paper, we explore the suitability of SDN switches' stateful forwarding abstractions to model accelerated functions in both software and hardware accelerators, such as optimized software switches and FPGA-based NICs. In particular, we select an Extended Finite State Machine abstraction and demonstrate its suitability by implementing the Linux's iptables interface. By doing so, we provide the acceleration of functions such as stateful firewalls, load balancers and dynamic NATs. We find that supporting a flow-level programming consistency model is an important feature of a programming abstraction in this context. Furthermore, we demonstrate that such a model simplifies the scaling of the system when implemented in software, enabling efficient multi-core processing without harming state consistency.

cs.NI↗

arXiv2016

Open Packet Processor: a programmable architecture for wire speed platform-independent stateful in-network processing

This paper aims at contributing to the ongoing debate on how to bring programmability of stateful packet processing tasks inside the network switches, while retaining platform independency. Our proposed approach, named "Open Packet Processor" (OPP), shows the viability (via an hardware prototype relying on commodity HW technologies and operating in a strictly bounded number of clock cycles) of eXtended Finite State Machines (XFSM) as low-level data plane programming abstraction. With the help of examples, including a token bucket and a C4.5 traffic classifier based on a binary tree, we show the ability of OPP to support stateful operation and flow-level feature tracking. Platform independence is accomplished by decoupling the implementation of hardware primitives (registries, conditions, update instructions, forwarding actions, matching facilities) from their usage by an application formally described via an abstract XFSM. We finally discuss limitations and extensions.

cs.NI↗

arXiv2014

Towards Wire-speed Platform-agnostic Control of OpenFlow Switches

The possibility to offload, via a platform-agnostic specification, the execution of (some/part of the) control functions down to the switch and operate them at wire speed based on packet level events, would yield significant benefits in terms of control latency and reaction times, meanwhile retaining the SDN-type ability to program and instantiate a desired network operation from a central controller. While programmability inside the switches, at wire speed and using platform-independent abstractions, of "any possible'" control function seems well beyond the OpenFlow capabilities, in this paper we argue that a non trivial sub-class of stateful control functions, namely those that can be abstracted in terms of Mealy (Finite State) Machines, is already compatible with off-the-shelf OpenFlow version 1.1+ Hardware with marginal architectural modifications. With minimal additional hardware circuitry, the above sub-class can be extended to include support for bidirectional/cross-flow state handling. We demonstrate the viability of our proposed approach via two proof-of-concept implementations (hardware and software), and we show how some stateful control functionalities frequently exploited in network protocols are readily deployed using our application programming interface.

cs.NI↗

arXiv2013

StreaMon: a data-plane programming abstraction for Software-defined Stream Monitoring

The fast evolving nature of modern cyber threats and network monitoring needs calls for new, "software-defined", approaches to simplify and quicken programming and deployment of online (stream-based) traffic analysis functions. StreaMon is a carefully designed data-plane abstraction devised to scalably decouple the "programming logic" of a traffic analysis application (tracked states, features, anomaly conditions, etc.) from elementary primitives (counting and metering, matching, events generation, etc), efficiently pre-implemented in the probes, and used as common instruction set for supporting the desired logic. Multi-stage multi-step real-time tracking and detection algorithms are supported via the ability to deploy custom states, relevant state transitions, and associated monitoring actions and triggering conditions. Such a separation entails platform-independent, portable, online traffic analysis tasks written in a high level language, without requiring developers to access the monitoring device internals and program their custom monitoring logic via low level compiled languages (e.g., C, assembly, VHDL). We validate our design by developing a prototype and a set of simple (but functionally demanding) use-case applications and by testing them over real traffic traces.

cs.NI↗