arXiv subjects

Sam Sullivan-Allsop

Publications and source records attributed to Sam Sullivan-Allsop.

9 recordsLinked to original sources

arXiv2026

Moir\'e-induced lattice reconstruction at buried atomic interfaces

Atomic reconstruction at twisted two-dimensional interfaces governs many of their emergent optical, electronic, and mechanical properties, including sliding ferroelectricity. Despite recent progress in understanding lattice reconstruction in suspended twisted bilayers, structural changes at van der Waals heterointerfaces between multilayer crystals remain largely unexplored. Here we use multi-slice electron ptychography to non-invasively recover the three-dimensional atomic structure at marginally twisted rhombohedral interfaces between thick transition-metal dichalcogenide crystals. With a position precision of ~3 pm and a depth resolution ~1 nm, we resolve the twist-induced lattice reconstruction field per layer, and the resulting dislocation network at the buried interface. Despite the bulk nature, we observe markedly strong in-plane interfacial reconstruction due to suppression of the out-of-plane bending by outer layers, exceeding predictions from our three-dimensional modelling. Furthermore, we extract the strain tensor evolution during the decay of the reconstruction into the bulk, providing a structural foundation for understanding multi-layer moir\'e systems.

cond-mat.mes-hall↗

arXiv2026

Atomic-resolution imaging of gold species at organic liquid-solid interfaces

Understanding solid-liquid interfaces at the atomic-scale is key to improved performance of heterogeneous catalysts, electrodes and membranes. Here we combine unique specimen design, record atomic resolution in situ electron microscopy, and artificial intelligence-enabled analysis to achieve a step change in quantitative understanding of interfacial atomic behaviour. We create the first graphene liquid cells with organic solvents and employ them to track over 106 gold adatoms and clusters at a graphene surface immersed in acetone and cyclohexanone. We reveal dynamic correlated behaviour of gold adatom monomers, dimers, trimers and clusters, strongly influenced by each other, the solvent properties, and the atomic lattice of the substrate, in good agreement with theoretical calculations. We use the results to interpret differences in catalytic activity towards the industrially important acetylene hydrochlorination reaction. This new capability for exploration of atomic scale chemistry could enable rational design of future catalysts, membranes and electrodes with improved functionality.

cond-mat.mtrl-sci↗

arXiv2026

Atomic imaging of 2D transition metal dihalides

Transition metal di-iodides such as FeI2, NiI2 and CoI2 are an emerging class of 2D magnets exhibiting rich and diverse magnetic behaviour, but their study at the monolayer limit has been severely hindered by fabrication challenges due to their air-sensitivity. Here, we introduce a polymer-free method for clean, rapid, and high-yield assembly of hermetically encapsulated suspended samples of air-sensitive monolayers. Applying it to di-iodides enables atomic resolution characterisation of thin samples - down to the monolayer limit - for the first time. Our imaging, combined with complementary first-principles calculations, reveals an unusually small energy barrier between alternate stable stacking polytypes in few-layer films, enabling extrinsic control of the stacking phase. We also observe stable isolated iodine vacancies that do not aggregate to form extended structures, and identify and verify the stability of the various edge configurations of thin samples. These results establish the unique structural characteristics of these materials in the thin limit, and more broadly demonstrate the utility of our transfer platform for creating atomically clean suspended vdW heterostructures.

cond-mat.mtrl-sci↗

arXiv2026

Noise2Void for Denoising Atomic Resolution Scanning Transmission Electron Microscopy Images

The Noise2Void technique is demonstrated for successful denoising of atomic-resolution scanning transmission electron microscopy (STEM) images. The technique is applied to denoising atomic resolution images and videos of gold adatoms on a graphene surface within a graphene liquid cell, with the denoised experimental data qualitatively demonstrating improved visibility of both the Au adatoms and the graphene lattice. The denoising performance is quantified by comparison to similar simulated data and the approach is found to significantly outperform both total variation and simple Gaussian blurring. Compared to other denoising methods, the Noise2Void technique has the combined advantages that it requires no manual intervention during training or denoising, no prior knowledge of the sample and is compatible with real time data acquisition rates of at least 45 frames per second.

cond-mat.mtrl-sci↗

arXiv2025

Phase engineering of 1T$'$ and 1T CrS2 and Cr2S3 by MOCVD

Layered Cr-chalcogenides compounds offer a rich range of crystal phases with different magnetic properties some of which have been predicted only but not experimentally verified. Here we demonstrate a previously unreported crystal phase of CrS2, namely the distorted octahedral (1T$'$) structure, synthesized via metal-organic chemical vapour deposition (MOCVD). We achieved the tuneable synthesis of either 1T$'$ or 1T phase CrS2. The structure were identified using polarized Raman spectroscopy, density functional perturbation theory (DFPT), as well as scanning electron diffraction (4D-STEM). 4D-STEM reveals that 1T$'$ crystals grow from an originally nucleated kinetically favoured 1T phase which then transform into the thermodynamically stable 1T$'$ phase. Magneto-optic Kerr imaging reveals that the 1T$'$ CrS2 crystals have soft ferromagnetic nature at low temperature. Our MOCVD growth of complex phases of 2D CrS2 with long-range magnetic order paves the way for the scalable synthesis of 2D magnets for ultrathin magnetic memories for logic-in-memory applications and spintronics.

cond-mat.mtrl-sci↗

arXiv2025

Isotopically Selected Single Antimony Molecule Doping

A reliable route to the deterministic fabrication of impurity ion donors in silicon is required to advance quantum computing architectures based upon such systems. This paper reports the ability to dope isotopically-defined unique (${}^{121}\mathrm{Sb}{}^{123}\mathrm{Sb}$) clusters into silicon with measured detection efficiencies of 94% being obtained. Atomically resolved imaging of the doped clusters reveals a Sb-to-Sb separation of ~2 nm post-implantation, thus indicating suitability to form coupled qudit systems. The method used is fully compatible with integration into processing that includes pre-enrichment of the silicon host to < 3ppm ${}^{29}\mathrm{Si}$ levels. As such, we present a potential pathway to the creation of scaled qudit arrays within silicon platforms for quantum computing.

cond-mat.mtrl-sci↗

arXiv2025

Dynamics of single Au nanoparticles on graphene simultaneously in real- and diffraction space by time-series convergent beam electron diffraction

Convergent beam electron diffraction (CBED) on two-dimensional materials allows simultaneous recording of the real-space image (tens of nanometers in size) and diffraction pattern of the same sample in one single-shot intensity measurement. In this study, we employ time-series CBED to visualize single Au nanoparticles deposited on graphene. The real-space image of the probed region, with the amount, size, and positions of single Au nanoparticles, is directly observed in the zero-order CBED disk, while the atomic arrangement of the Au nanoparticles is available from the intensity distributions in the higher-order CBED disks. From the time-series CBED patterns, the movement of a single Au nanoparticle with rotation up to 4{\deg} was recorded. We also observed facet diffraction lines - intense bright lines formed between the CBED disks of the Au nanoparticle, which we explain by diffraction at the Au nanoparticle's facets. This work showcases CBED as a useful technique for studying adsorbates on graphene using Au nanoparticles as a model platform, and paves the way for future studies of different objects deposited on graphene.

cond-mat.other↗

arXiv2024

One-step synthesis of graphene containing topological defects

Chemical vapour deposition enables large-domain growth of ideal graphene, yet many applications of graphene require the controlled inclusion of specific defects. We present a one-step chemical vapour deposition procedure aimed at retaining the precursor topology when incorporated into the grown carbonaceous film. When azupyrene, the molecular analogue of the Stone-Wales defect in graphene, is used as a precursor, carbonaceous monolayers with a range of morphologies are produced as a function of the copper substrate growth temperature. The higher the substrate temperature during deposition, the closer the resulting monolayer is to ideal graphene. Analysis, with a set of complementary materials characterisation techniques, reveals morphological changes closely correlated with changes in the atomic adsorption heights, network topology, and concentration of 5-/7-membered carbon rings. The engineered defective carbon monolayers can be transferred to different substrates, potentially enabling applications in nanoelectronics, sensorics, and catalysis.

cond-mat.mtrl-sci↗

arXiv2023

Ultra-clean assembly of van der Waals heterostructures

Layer-by-layer assembly of van der Waals (vdW) heterostructures underpins new discoveries in solid state physics, material science and chemistry. Despite the successes, all current 2D material (2DM) transfer techniques rely on the use of polymers which limit the cleanliness, ultimate electronic performance, and potential for optoelectronic applications of the heterostructures. In this article, we present a novel polymer-free platform for rapid and facile heterostructure assembly which utilises re-usable flexible silicon nitride membranes. We demonstrate that this allows fast and reproducible production of 2D heterostructures using both exfoliated and CVD-grown materials with perfect interfaces free from interlayer contamination and correspondingly excellent electronic behaviour, limited only by the size and intrinsic quality of the crystals used. Furthermore, removing the need for polymeric carriers allows new possibilities for vdW heterostructure fabrication: assembly at high temperatures up to 600{\deg}C, and in different environments including ultra-high vacuum (UHV) and when the materials are fully submerged in liquids. We demonstrate UHV heterostructure assembly for the first time, and show the reliable creation of graphene moir\'e superlattices with more than an order of magnitude improvement in their structural homogeneity. We believe that broad adaptation of our novel inorganic 2D materials assembly strategy will allow realisation of the full potential of vdW heterostructures as a platform for new physics and advanced optoelectronic technologies.

physics.app-ph↗