arXiv subjects

Samantha Walker

Publications and source records attributed to Samantha Walker.

At least 19 recordsLinked to original sources

arXiv2026

CCAT: The Prime-Cam Instrument for the Fred Young Submillimeter Telescope -- Overview and Status

Prime-Cam is a first-generation science instrument for the CCAT Observatory's six-meter aperture Fred Young Submillimeter Telescope (FYST), under construction at an elevation of 5600 m on Cerro Chajnantor in Chile's Atacama Desert. Prime-Cam will deliver over ten times greater mapping speed at submillimeter wavelengths than current facilities for unprecedented broadband and spectroscopic measurements in windows between 1.4 -- 0.3 mm (220 -- 850 GHz). When fully populated, Prime-Cam will field over 100,000 kinetic inductance detectors across seven independently optimized instrument modules. With Prime-Cam, the CCAT Collaboration will address a suite of science goals, from Big Bang cosmology, to galaxy evolution and star formation over cosmic time. Prime-Cam is scheduled for integration in FYST in late 2026, followed by a year of early science observations with the 280 and 350 GHz instrument modules. We discuss the design and in-lab testing of the 1.8-m diameter Prime-Cam receiver and 280 GHz instrument module, and give an update on deployment status and early science plans.

astro-ph.IM↗

arXiv2026

CCAT: Design and Characterization of the 350 GHz Instrument Module

The CCAT Collaboration's Prime-Cam instrument will soon be deployed to the Fred Young Submillimeter Telescope (FYST) in Chile's Atacama Desert. Featuring prominently in Prime-Cam's calibration and early science observations will be the 350 GHz instrument module, a broadband camera that will field more than 10,000 microwave kinetic inductance detectors (KIDs) across three detector arrays. Forecasts show this module will be capable of making the most sensitive to-date measurements of polarized dust emission over a large fraction of the sky at this frequency, enabling new galactic polarization science and improved understanding of cosmological foregrounds. In this work we discuss the design of the 350 GHz instrument module, covering aspects of the optics, readout, and detector arrays. We then report on the results of in-lab testing of the fully-integrated module, achieving stable cryogenic performance with a 100 mK focal plane, high detector yield, and a passband comparable to designed specifications. Upon completion of these tests, this module was shipped to the telescope site in Chile for integration in Prime-Cam.

astro-ph.IM↗

arXiv2026

Plasma Dynamics of Radiative Cooling Accretion Flow in AM Herculis with XRISM

We present XRISM/Resolve high-resolution X-ray spectroscopy of the prototypical magnetic cataclysmic variable AM Herculis. All satellite lines of highly ionized Fe are fully resolved. Lighter element lines (Si, S, Ca) show 2 - 3 eV widths consistent with purely thermal broadening, while the broader 6 - 7 eV Fe lines require additional bulk Doppler broadening. Spin-phase-resolved modulations are clearly detected in the Fe XXV and Fe XXVI lines, with semi-amplitudes of $81.8\pm6$ km s$^{-1}$ and $132.5\pm9$ km s$^{-1}$, and mean velocities of $143.6\pm6$ km s$^{-1}$ and $225.6\pm8$ km s$^{-1}$, respectively. After removing these bulk Doppler shifts, we obtain intrinsic Doppler widths of $5.23_{-0.15}^{+0.16}$ eV for Fe XXV and $6.23_{-0.18}^{+0.19}$ eV for Fe XXVI, directly revealing gradients of bulk velocity and temperature in the cooling-flow plasma. We additionally examined the resonance anisotropy predicted by Terada et al. (1999, 2001): the equivalent widths of the Fe XXV and Fe XXVI resonance lines increase at the pole-on phase by factors of 1.30 - 1.35, in positive correlation with their oscillator strengths. Combining XRISM with simultaneous NuSTAR data and PSAC/MCVSPEC plasma models, we derive a self-consistent shock temperature of $24.0\pm0.1$ keV and shock velocity of $1,116\pm2$ km s$^{-1}$. Radiative transfer simulations of the resonance lines further constrain the shock density to about $(5 - 6)\times10^{15}$ cm$^{-3}$, providing a new density diagnostic for accretion columns. The resulting accretion column geometry has a height of 200 - 300 km and a radius of 200 - 400 km.

astro-ph.HE↗

arXiv2026

CCAT: Mod-Cam Readout Overview and Flexible Stripline Performance

The CCAT Observatory's primary science instrument, Prime-Cam, is nearing readiness for deployment to the Fred Young Submillimeter Telescope (FYST) in the Atacama Desert in northern Chile. When fully deployed, Prime-Cam will field approximately 100,000 kinetic inductance detectors (KIDs) across seven instrument modules making both broadband and polarimetric measurements. Meanwhile, in-lab characterization of the first CCAT instrument module, a 280 GHz broadband camera fielding over 10,000 KIDs, is currently underway in the testbed instrument Mod-Cam. Both Mod-Cam and Prime-Cam will employ 46 cm long low-thermal-conductivity flexible circuits ("stripline") between 4 K and 300 K to connect large-format arrays of multiplexed KIDs in each instrument module to readout electronics. The 280 GHz camera currently installed in Mod-Cam uses six of these striplines to read out its over 10,000 detectors. We have examined the thermal and electrical performance of the stripline installed in Mod-Cam. We begin by characterizing the OFHC copper in the stripline traces, allowing for the estimation of thermal loading through these flexible circuits in their configurations in both Mod-Cam and Prime-Cam. We then directly measure the thermal conductivity of the stripline, finding it is best described by $kA = 22\pm6~T^{0.84\pm0.09}~\mathrm{μ~W~m~K^{-1}}$ for temperature ranges of 6 K < T < 20 K and $kA~=~0.6\pm0.3~T^{-0.4\pm0.1}~\mathrm{mW~m~K^{-1}}$ for ranges from 20 K < T < 80 K. Following our thermal characterizations, we report on the transmission and crosstalk properties of the Mod-Cam readout chain, isolating elevated crosstalk to SMP-SMA transition printed circuit boards (PCBs) that interface with the stripline. This finding validates the stripline circuit as a viable high-density cabling option for large-format array readout.

astro-ph.IM↗

arXiv2026

Imaging the Superconducting Proximity Effect in S-S'-S Transition Edge Sensors

Proximity effects at superconducting interfaces, between different superconductors (S-S') or between superconductors and normal metals (S-N), are fundamental to the performance of superconducting electronics, yet only few experiments have directly probed the spatial structure of proximity effects within a device. This is particularly relevant for transition edge sensors (TESs), where the interplay of direct and inverse proximity effects governs detector sensitivity. Here, we use scanning superconducting interference device (SQUID) susceptometry to directly image the local diamagnetic response in functional S-S'-S TES structures. We resolve long range proximity coupling extending over tens of micrometers, revealing that the local transition temperature is dramatically tuned by neighboring regions, being either enhanced by superconducting (S) leads or suppressed by normal metal (N) contacts. Our observations are quantitatively supported by Ginzburg Landau modeling of the device geometry and calculations of the temperature dependent diamagnetism based on self-consistent Usadel equations. By providing spatially resolved measurements of the interplay of proximity effects in TES devices, this work establishes a framework for understanding and controlling superconducting states in heterogeneous superconducting structures.

cond-mat.supr-con↗

arXiv2026

CCAT: Magnetic Sensitivity Measurements of Kinetic Inductance Detectors

The CCAT Observatory is a ground-based submillimeter to millimeter experiment located on Cerro Chajnantor in the Atacama Desert, at an altitude of 5,600 meters. CCAT features the 6-meter Fred Young Submillimeter Telescope (FYST), which will cover frequency bands from 210 GHz to 850 GHz using its first-generation science instrument, Prime-Cam. The detectors used in Prime-Cam are feedhorn-coupled, lumped-element superconducting microwave kinetic inductance detectors (KIDs). The telescope will perform wide-area surveys at speeds on the order of degrees per second. During telescope operation, the KIDs are exposed to changes in the magnetic field caused by the telescope's movement through Earth's magnetic field and internal sources within the telescope. We present and compare measurements of the magnetic sensitivity of three different CCAT KID designs at 100 mK. The measurements are conducted in a dilution refrigerator (DR) with a set of room temperature Helmholtz coils positioned around the DR. We discuss the implications of these results for CCAT field operations.

astro-ph.IM↗

arXiv2025

CCAT: Optical Responsivity, Noise, and Readout Optimization of KIDs for Prime-Cam

The Prime-Cam instrument on the Fred Young Submillimeter Telescope (FYST) at the CCAT Observatory will conduct sensitive millimeter to submillimeter surveys for a range of astrophysical and cosmological sciences. Prime-Cam will use kinetic inductance detectors (KIDs) sensitive to multiple frequency bands spanning 280-850 GHz. With over 100,000 sensors under development, these KID arrays will soon form the largest submillimeter focal plane ever built. With fixed microwave tones probing amplitude and phase modulations in the KIDs due to incoming radiation, challenges arise in determining the optimal readout settings, especially under varying atmospheric loading. Realizing the science goals of FYST requires operating the detectors at optimal performance and determining accurate responsivities, which depend on readout tone placement and power. To address these challenges, we present laboratory measurements of sample pixels from the 280 GHz TiN and Al arrays using a blackbody cold load to simulate observing conditions. These measurements probe detector responsivity and noise across varying optical loading, tone power, and tone placement, providing the foundation to guide in situ calibration and operation of the >100,000 KIDs. We characterize detector sensitivity via the Noise Equivalent Power (NEP) as a function of readout tone power and placement, and measure the impact of detuning due to varying optical power on the NEP. Our test setup and methodology will inform the commissioning of Prime-Cam, in situ detector calibration procedures, the cadence of probe tone resetting, and potential design refinements for future arrays, supporting FYST's planned first light in 2026.

astro-ph.IM↗

arXiv2025

CCAT: Design, Implementation, and Testing of a System to Read Out over 10,000 280 GHz KIDs using RFSoC Electronics

Over the past decade, kinetic inductance detectors (KIDs) have emerged as a viable superconducting technology for astrophysics at millimeter and submillimeter wavelengths. KIDs spanning 210 - 850 GHz across seven instrument modules will be deployed in the Prime-Cam instrument of CCAT Observatory's Fred Young Submillimeter Telescope at an elevation of 5600 m on Cerro Chajnantor in Chile's Atacama Desert. The natural frequency-division multiplexed readout of KIDs allows hundreds of detectors to be coupled to a single radio frequency (RF) transmission line, but requires sophisticated warm readout electronics. The FPGA-based Xilinx ZCU111 radio frequency system on chip (RFSoC) offers a promising and flexible solution to the challenge of warm readout. CCAT uses custom packaged RFSoCs to read out KIDs in the Prime-Cam instrument. Each RFSoC can simultaneously read out four RF channels with up to 1,000 detectors spanning a 512 MHz bandwidth per channel using the current firmware. We use five RFSoCs to read out the >10,000 KIDs in the broadband 280 GHz instrument module. Here, we describe and demonstrate the readout hardware, software and pipeline for the RFSoC system. We present a detector position map of the 280 GHz module focal plane and preliminary averaged spectral responses of a small subset of detectors from the TiN and first Al arrays. These measurements demonstrate our ability to simultaneously readout thousands of detectors, validate the end-to-end performance of the readout and optical systems, and represent a critical step toward reading out the ~100,000 KIDs in Prime-Cam in its future full capacity configuration.

astro-ph.IM↗

arXiv2025

CCAT: Mod-Cam Cryogenic Performance and its Impact on 280 GHz KID Array Noise

The CCAT Observatory's Fred Young Submillimeter Telescope (FYST) is designed to observe submillimeter astronomical signals with high precision, using receivers fielding state-of-the-art kinetic inductance detector (KID) arrays. Mod-Cam, a first-light instrument for FYST, serves as a testbed for instrument module characterization, including detailed evaluation of thermal behavior under operating conditions prior to deploying modules in the larger Prime-Cam instrument. Prime-Cam is a first generation multi-band, wide-field camera for FYST, designed to field up to seven instrument modules and provide unprecedented sensitivity across a broad frequency range. We present results from two key laboratory characterizations: an "optically open" cooldown to validate the overall thermal performance of the cryostat, and a "cold load" cooldown to measure the effect of focal plane temperature stability on detector noise. During the optically open test, we achieved stable base temperatures of 1.5 K on the 1 K stage and 85 mK at the detector stage. In the cold load configuration, we measured a detector focal plane RMS temperature stability of 3.2e-5 K. From this stability measurement, we demonstrate that the equivalent power from focal plane thermal fluctuations is only 0.0040% of a 5pW incident photon power for aluminum detectors and 0.0023% for titanium-nitride detectors, a negligible level for CCAT science goals. This highlights the success of the cryogenic system design and thermal management.

astro-ph.IM↗

arXiv2024

CCAT: LED Mapping and Characterization of the 280 GHz TiN KID Array

Prime-Cam, one of the primary instruments for the Fred Young Submillimeter Telescope (FYST) developed by the CCAT Collaboration, will house up to seven instrument modules, with the first operating at 280 GHz. Each module will include three arrays of superconducting microwave kinetic inductance detectors (KIDs). The first KID array fabricated for the 280 GHz module uses titanium-nitride (TiN) as the superconducting material and has 3,456 individual detectors, while the other two arrays use aluminum. This paper presents the design and laboratory characterization of the 280 GHz TiN array, which is cooled below its critical temperature to ~0.1 K and read out over six RF feedlines. LED mapping, a technique for matching the measured resonant frequency of a detector to its physical position, was performed on the array so that the results can be used to lithographically trim the KID capacitors and increase the yield of the array by reducing frequency collisions. We present the methods and results of LED mapping the 280 GHz TiN KID array before deployment on FYST.

astro-ph.IM↗

arXiv2024

Direct Imaging of Transition-Edge Sensors with Scanning SQUID Microscopy

Significant advancements have been made in understanding the physics of transition-edge sensors (TESs) over the past decade. However, key questions remain, particularly a detailed understanding of the current-dependent resistance of these detectors when biased within their superconducting transition. We use scanning superconducting quantum interference device (SQUID) microscopy (SSM) to image the local diamagnetic response of aluminum-manganese alloy (Al-Mn) transition-edge sensors (TESs) near their critical temperature of approximately 175 mK. By doing so, we gain insights into how the device dimensions influence TES transition width, which in turn affects device operation and informs optimal device design. Our images reveal that the Al-Mn thin film near the niobium (Nb) leads exhibits an excess diamagnetic response at temperatures several milli-Kelvin (mK) higher than the bulk of the film farther from the contacts. A possible origin of this behavior is a longitudinal proximity effect between the Nb and Al-Mn where the TES acts as a weak link between superconducting leads. We discuss how this effect shapes the temperature dependence of the resistance as the spacing between the leads decreases. This work demonstrates that magnetic imaging with SSM is a powerful tool for local characterization of superconducting detectors.

cond-mat.supr-con↗

arXiv2024

CCAT: Nonlinear effects in 280 GHz aluminum kinetic inductance detectors

Prime-Cam, a first-generation science instrument for the Atacama-based Fred Young Submillimeter Telescope, is being built by the CCAT Collaboration to observe at millimeter and submillimeter wavelengths using kinetic inductance detectors (KIDs). Prime-Cam's 280 GHz instrument module will deploy with two aluminum-based KID arrays and one titanium nitride-based KID array, totaling approximately 10,000 detectors at the focal plane, all of which have been fabricated and are currently undergoing testing. One complication of fielding large arrays of KIDs under dynamic loading conditions is tuning the detector tone powers to maximize signal-to-noise while avoiding bifurcation due to the nonlinear kinetic inductance. For aluminum-based KIDs, this is further complicated by additional nonlinear effects which couple tone power to resonator quality factors and resonant frequencies. While both nonequilibrium quasiparticle dynamics and two-level system fluctuations have been shown to give rise to qualitatively similar distortions, modeling these effects alongside nonlinear kinetic inductance is inefficient when fitting thousands of resonators on-sky with existing models. For this reason, it is necessary to have a detailed understanding of the nonlinear effects across relevant detector loading conditions, including how they impact on on-sky noise and how to diagnose the detector's relative performance. We present a study of the competing nonlinearities seen in Prime-Cam's 280 GHz aluminum KIDs, with a particular emphasis on the resulting distortions to the resonator line shape and how these impact detector parameter estimation.

astro-ph.IM↗

arXiv2024

CCAT: Prime-Cam Optics Overview and Status Update

Prime-Cam is a first-generation science instrument for the CCAT Observatory's six-meter aperture Fred Young Submillimeter Telescope (FYST). FYST's crossed-Dragone design provides high optical throughput to take advantage of its unique site at 5600 m on Cerro Chajnantor in Chile's Atacama Desert to reach mapping speeds over ten times greater than current and near-term submillimeter experiments. Housing up to seven independent instrument modules in its 1.8-meter diameter cryostat, Prime-Cam will combine broadband polarization-sensitive modules and spectrometer modules designed for observations in several frequency windows between 210 GHz and 850 GHz to study a wide range of astrophysical questions from Big Bang cosmology to the formation of stars and galaxies in the Epoch of Reionization and beyond. In order to cover this range of frequencies and observation modes, each of the modules contains a set of cold reimaging optics that is optimized for the science goals of that module. These optical setups include several filters, three or four anti-reflection-coated silicon lenses, and a Lyot stop to control the field of view and illumination of the primary mirror, satisfy a series of mechanical constraints, and maximize optical performance within each passband. We summarize the design considerations and trade-offs for the optics in these modules and provide a status update on the fabrication of the Prime-Cam receiver and the design of its 1 K and 100 mK thermal BUSs.

astro-ph.IM↗

arXiv2024

CCAT: Detector Noise Limited Performance of the RFSoC-based Readout Electronics for mm/sub-mm/far-IR KIDs

The Fred Young Submillimeter Telescope (FYST), on Cerro Chajnantor in the Atacama desert of Chile, will conduct wide-field and small deep-field surveys of the sky with more than 100,000 detectors on the Prime-Cam instrument. Kinetic inductance detectors (KIDs) were chosen as the primary sensor technology for their high density focal plane packing. Additionally, they benefit from low cost, ease of fabrication, and simplified cryogenic readout, which are all beneficial for successful deployment at scale. The cryogenic multiplexing complexity is pulled out of the cryostat and is instead pushed into the digital signal processing of the room temperature electronics. Using the Xilinx Radio Frequency System on a Chip (RFSoC), a highly multiplexed KID readout was developed for the first light Prime-Cam and commissioning Mod-Cam instruments. We report on the performance of the RFSoC-based readout with multiple detector arrays in various cryogenic setups. Specifically we demonstrate detector noise limited performance of the RFSoC-based readout under the expected optical loading conditions.

astro-ph.IM↗

arXiv2024

CCAT: Comparisons of 280 GHz TiN and Al Kinetic Inductance Detector Arrays

The CCAT Collaboration's six-meter Fred Young Submillimeter Telescope is scheduled to begin observing in the Chilean Atacama in 2025, targeting a variety of science goals throughout cosmic history. Prime-Cam is a 1.8-meter diameter cryostat that will host up to seven independent instrument modules designed for simultaneous spectroscopic and broadband, polarimetric surveys at millimeter to submillimeter wavelengths. The first of these instrument modules, the 280 GHz module, will include ${\sim}$10,000 kinetic inductance detectors (KIDs) across three arrays. While the first array was fabricated out of tri-layer TiN/Ti/TiN, the other two arrays were fabricated out of a single layer of Al. This combination of materials within the same instrument provides a unique opportunity to directly compare the performance and noise properties of two different detector materials that are seeing increasing use within the field. We present preliminary comparisons here based on lab testing, along with a discussion of the potential impacts on operation when observing and translating raw data to science-grade maps.

astro-ph.IM↗

arXiv2024

CCAT: FYST Prime-Cam Readout Software: A framework for massively scalable KID arrays

We outline the development of the readout software for the Prime-Cam and Mod-Cam instruments on the CCAT Fred Young Submillimeter Telescope (FYST), primecam_readout. The instruments feature lumped-element kinetic inductance detector (LEKID) arrays driven by Xilinx ZCU111 RFSoC boards. In the current configuration, each board can drive up to 4000 KIDs, and Prime-Cam is implementing approximately 25 boards. The software runs on a centralized control computer connected to the boards via dedicated ethernet, and facilitates such tasks as frequency-multiplexed tone comb driving, comb calibration and optimization, and detector timestream establishment. The control computer utilizes dynamically generated control channels for each board, allowing for simultaneous parallel control over all, while uniquely tracking diagnostics for each. This work demonstrates a scalable RFSoC readout architecture where computational demands increase linearly with the number of detectors, enabling control of tens-of-thousands of KIDs with modest hardware, and opening the door to the next generation of KID arrays housing millions of detectors.

astro-ph.IM↗

arXiv2022

Simons Observatory Focal-Plane Module: Detector Re-biasing With Bias-step Measurements

The Simons Observatory is a ground-based cosmic microwave background survey experiment that consists of three 0.5 m small-aperture telescopes and one 6 m large-aperture telescope, sited at an elevation of 5200 m in the Atacama Desert in Chile. SO will deploy 60,000 transition-edge sensor (TES) bolometers in 49 separate focal-plane modules across a suite of four telescopes covering 30/40 GHz low frequency (LF), 90/150 GHz mid frequency (MF), and 220/280 GHz ultra-high frequency (UHF). Each MF and UHF focal-plane module packages 1720 optical detectors spreading across 12 detector bias lines that provide voltage biasing to the detectors. During observation, detectors are subject to varying atmospheric emission and hence need to be re-biased accordingly. The re-biasing process includes measuring the detector properties such as the TES resistance and responsivity in a fast manner. Based on the result, detectors within one bias line then are biased with suitable voltage. Here we describe a technique for re-biasing detectors in the modules using the result from bias-step measurement.

astro-ph.IM↗

arXiv2021

The Simons Observatory: Galactic Science Goals and Forecasts

Observing in six frequency bands from 27 to 280 GHz over a large sky area, the Simons Observatory (SO) is poised to address many questions in Galactic astrophysics in addition to its principal cosmological goals. In this work, we provide quantitative forecasts on astrophysical parameters of interest for a range of Galactic science cases. We find that SO can: constrain the frequency spectrum of polarized dust emission at a level of $Δβ_d \lesssim 0.01$ and thus test models of dust composition that predict that $β_d$ in polarization differs from that measured in total intensity; measure the correlation coefficient between polarized dust and synchrotron emission with a factor of two greater precision than current constraints; exclude the non-existence of exo-Oort clouds at roughly 2.9$σ$ if the true fraction is similar to the detection rate of giant planets; map more than 850 molecular clouds with at least 50 independent polarization measurements at 1 pc resolution; detect or place upper limits on the polarization fractions of CO(2-1) emission and anomalous microwave emission at the 0.1% level in select regions; and measure the correlation coefficient between optical starlight polarization and microwave polarized dust emission in $1^\circ$ patches for all lines of sight with $N_{\rm H} \gtrsim 2\times10^{20}$ cm$^{-2}$. The goals and forecasts outlined here provide a roadmap for other microwave polarization experiments to expand their scientific scope via Milky Way astrophysics.

astro-ph.GA↗