SearcharxivSearch

arXiv subjects

Sami Tantawi

Publications and source records attributed to Sami Tantawi.

18 recordsLinked to original sources

Nonlinear Photoemission for Bright Beams in X-Band Photoinjectors

The ongoing development of low-cost and compact x-ray light sources is vital for increasing the number of experiments that can be performed at the atomic scale. Smaller sources can be operated in blow-out mode, in which a high-charge, short-bunch length electron beam self compresses into a uniformly ellipsoidal shape. This mode necessitates a photoinjector whose laser has a pulse duration on the order of $10^2$ fs. In this case, linear photoemission with an ultraviolet laser presents significant technical challenges, as many optical substrates degrade at these wavelengths. In this paper, we present an alternative design that uses nonlinear photoemission to produce electron beams with high charge and short bunch length. This photoinjector design produces an electron beam with a bunch charge of up to $200$ pC, an RMS bunch length of $140$ fs, a normalized transverse emittance of $1$ to $1.4$ mm$\cdot$mrad, and an energy spread of $10^{-4}$. This results in a beam brightness of $9.74\times10^{18}$ A/m$^2$, which is bright enough for our beamline's purposes. Ongoing efforts are aimed at further increasing the electron beam brightness by using a spatial light modulator to shape the laser

physics.optics

RF Accelerator Technology R&D: Report of AF7-rf Topical Group to Snowmass 2021

Accelerator radio frequency (RF) technology has been and remains critical for modern high energy physics (HEP) experiments based on particle accelerators. Tremendous progress in advancing this technology has been achieved over the past decade in several areas highlighted in this report. These achievements and new results expected from continued R&D efforts could pave the way for upgrades of existing facilities, improvements to accelerators already under construction (e.g., PIP-II), well-developed proposals (e.g., ILC, CLIC), and/or enable concepts under development, such as FCC-ee, CEPC, C3, HELEN, multi-MW Fermilab Proton Intensity Upgrade, future Muon Colloder, etc. Advances in RF technology have impact beyond HEP on accelerators built for nuclear physics, basic energy sciences, and other areas. Recent examples of such accelerators are European XFEL, LCLS-II and LCLS-II-HE, SHINE, SNS, ESS, FRIB, and EIC. To support and enable new accelerator-based applications and even make some of them feasible, we must continue addressing their challenges via a comprehensive RF R&D program that would advance the existing RF technologies and explore the nascent ones.

physics.acc-ph

C$^3$ Demonstration Research and Development Plan

C$^3$ is an opportunity to realize an e$^+$e$^-$ collider for the study of the Higgs boson at $\sqrt{s} = 250$ GeV, with a well defined upgrade path to 550 GeV while staying on the same short facility footprint. C$^3$ is based on a fundamentally new approach to normal conducting linear accelerators that achieves both high gradient and high efficiency at relatively low cost. Given the advanced state of linear collider designs, the key system that requires technical maturation for C$^3$ is the main linac. This white paper presents the staged approach towards a facility to demonstrate C$^3$ technology with both Direct (source and main linac) and Parallel (beam delivery, damping ring, ancillary component) R&D. The white paper also includes discussion on the approach for technology industrialization, related HEP R&D activities that are enabled by C$^3$ R&D, infrastructure requirements and siting options.

physics.acc-ph

Strategy for Understanding the Higgs Physics: The Cool Copper Collider

A program to build a lepton-collider Higgs factory, to precisely measure the couplings of the Higgs boson to other particles, followed by a higher energy run to establish the Higgs self-coupling and expand the new physics reach, is widely recognized as a primary focus of modern particle physics. We propose a strategy that focuses on a new technology and preliminary estimates suggest that can lead to a compact, affordable machine. New technology investigations will provide much needed enthusiasm for our field, resulting in trained workforce. This cost-effective, compact design, with technologies useful for a broad range of other accelerator applications, could be realized as a project in the US. Its technology innovations, both in the accelerator and the detector, will offer unique and exciting opportunities to young scientists. Moreover, cost effective compact designs, broadly applicable to other fields of research, are more likely to obtain financial support from our funding agencies.

hep-ex

XCC: An X-ray FEL-based $γγ$ Collider Higgs Factory

This report describes the design of a $γγ$ Higgs factory in which 62.8 GeV electron beams collide with 1 keV X-ray free electron laser (XFEL) beams to produce colliding beams of 62.5 GeV photons. The Higgs boson production rate is 34,000 Higgs bosons per $10^7$ second year, roughly the same as the ILC Higgs rate. The electron accelerator is based on cold copper distributed coupling (C$^3$) accelerator technology. The 0.7 J pulse energy of the XFEL represents a 300-fold increase over the pulse energy of current soft x-ray FEL's. Design challenges are discussed, along with the R\&D to address them, including demonstrators.

hep-ex

Design, fabrication, and tuning of a THz-driven electron gun

We present the design, fabrication, and low power testing of a THz-driven field emission electron gun. The two cell standing-wave gun is designed to be powered by a 110 GHz gyrotron and produce 360 keV electrons with 500 kW of input power. Several gun structures were fabricated using a high precision diamond turned mandrel and copper electroforming. The field emission source is a copper tip with a 50 $μ$m radius inserted halfway into first cell. The frequencies of the cavity resonances were mechanically tuned using azimuthal compression. This work presents electromagnetic and particle simulations of the design and cold test measurements of the fabricated structures.

physics.acc-ph

Advanced RF Sources R&D for Economical Future Colliders

The high power RF system will be a significant budgetary driver for any future collider. An order-of-magnitude improvement in cost/capability is needed, and as a result, a robust R&D program in next-generation, economical RF sources is essential. In this paper, we discuss the challenges and opportunities that arise from advancing the state of the art in these devices. Specifically, research initiatives in new circuit topologies, advanced manufacturing techniques, and novel alternatives to conventional RF source components are discussed.

physics.acc-ph

C$^3$: A "Cool" Route to the Higgs Boson and Beyond

We present a proposal for a cold copper distributed coupling accelerator that can provide a rapid route to precision Higgs physics with a compact 8 km footprint. This proposal is based on recent advances that increase the efficiency and operating gradient of a normal conducting accelerator. This technology also provides an $e^{+}e^{-}$ collider path to physics at multi-TeV energies. In this article, we describe our vision for this technology and the near-term R&D program needed to pursue it.

hep-ex

Variational Self-Consistent Theory for Beam-Loaded Cavities

A new variational theory is presented for beam loading in microwave cavities. The beam--field interaction is formulated as a dynamical interaction whose stationarity according to Hamilton's principle will naturally lead to steady-state solutions that indicate how a cavity's resonant frequency, $Q$ and optimal coupling coefficient will detune as a result of the beam loading. A driven cavity Lagrangian is derived from first principles, including the effects of cavity wall losses, input power and beam interaction. The general formulation is applied to a typical klystron input cavity to predict the appropriate detuning parameters required to maximize the gain (or modulation depth) in the average Lorentz factor boost, $\langle Δγ\rangle$. Numerical examples are presented, showing agreement with the general detuning trends previously observed in the literature. The developed formulation carries several advantages for beam-loaded cavity structures. It provides a self-consistent model for the dynamical (nonlinear) beam--field interaction, a procedure for maximizing gain under beam-loading conditions, and a useful set of parameters to guide cavity-shape optimization during the design of beam-loaded systems. Enhanced clarity of the physical picture underlying the problem seems to be gained using this approach, allowing straightforward inclusion or exclusion of different field configurations in the calculation and expressing the final results in terms of measurable quantities. Two field configurations are discussed for the klystron input cavity, using finite magnetic confinement or no confinement at all. Formulating the problem in a language that is directly accessible to the powerful techniques found in Hamiltonian dynamics and canonical transformations may potentially carry an additional advantage in terms of analytical computational gains, under suitable conditions.

physics.acc-ph

Experimental demonstration of particle acceleration with normal conducting accelerating structure at cryogenic temperature

Reducing the operating temperature of normal conducting particle accelerators substantially increases their efficiency. Low-temperature operation increases the yield strength of the accelerator material and reduces surface resistance, hence a great reduction in cyclic fatigue could be achieved resulting in a large reduction in breakdown rates compared to room-temperature operation. Furthermore, temperature reduction increases the intrinsic quality factor of the accelerating cavities, and consequently, the shunt impedance leading to increased system efficiency and beam loading capabilities. In this paper, we present an experimental demonstration of the high-gradient operation of an X-band, 11.424 GHz, 20-cells linear accelerator (linac) operating at a liquid nitrogen temperature of 77 K. The tested linac was previously processed and tested at room temperature. We verified the enhanced accelerating parameters of the tested accelerator at cryogenic temperature using different measurements including electron beam acceleration up to a gradient of 150 MV/m, corresponding to a peak surface electric field of 375 MV/m. We also measured the breakdown rates in the tested structure showing a reduction of two orders of magnitude, x100, compared to their values at room temperature for the same accelerating gradient.

physics.acc-ph

Axion Dark Matter Detection by Superconducting Resonant Frequency Conversion

We propose an approach to search for axion dark matter with a specially designed superconducting radio frequency cavity, targeting axions with masses $m_a \lesssim 10^{-6} \text{ eV}$. Our approach exploits axion-induced transitions between nearly degenerate resonant modes of frequency $\sim$ GHz. A scan over axion mass is achieved by varying the frequency splitting between the two modes. Compared to traditional approaches, this allows for parametrically enhanced signal power for axions lighter than a GHz. The projected sensitivity covers unexplored parameter space for QCD axion dark matter for $10^{-8} \text{ eV} \lesssim m_a \lesssim10^{-6} \text{ eV}$ and axion-like particle dark matter as light as $m_a \sim 10^{-14} \text{ eV}$.

hep-ph

A classical field theory formulation for the numerical solution of time harmonic electromagnetic fields

Finite element representations of Maxwell's equations pose unusual challenges inherent to the variational representation of the `curl-curl' equation for the fields. We present a variational formulation based on classical field theory. Borrowing from QED, we modify the Lagrangian by adding an implicit gauge-fixing term. Our formulation, in the language of differential geometry, shows that conventional edge elements should be replaced by the simpler nodal elements for time-harmonic problems. We demonstrate how this formulation, adhering to the deeper underlying symmetries of the four-dimensional covariant field description, provides a highly general, robust numerical framework.

physics.comp-ph

Distributed Coupling Accelerator Structures: A New Paradigm for High Gradient Linacs

We present a topology for linear accelerators (linacs) that permits larger degrees of freedom for the optimization of individual cavity shapes. The power is distributed to the cavities through a waveguide with periodic apertures that guarantees the correct phases and amplitudes along the structure. This topology optimizes the power consumption and efficiency and allows the manipulation of the surface fields for high gradient operation. It also provides a possibility for low-temperature manufacturing techniques for use with novel materials. This greatly enhanced performance for both normal and superconducting linacs. We present a design and an experimental demonstration of this linac.

physics.acc-ph

New SLED 3 system for Multi-mega Watt RF compressor

At SLAC, we have designed and installed an X-band radio-frequency transverse deflector system at the LCLS for measurement of the time-resolved lasing effects on the electron beam and extraction of the temporal profile of the pulses in routine operations. We have designed an X-Band SLED system capable to augment the available klystron power and to double the kick.

physics.acc-ph

Conceptual Design Of An Ideal Variable Coupler For Superconducting Radiofrequency 1.3GHz Cavities

Inspired by the development of over-moded RF component as an undulator, we explored another over-moded structure that could serve the variable coupling for SRF purpose. This application is to fulfill variation of S11 from 0 to -20db with CW power of 7 KW. The static heat loss in the coupler is trivial from calculation. An advantage of this coupler is that the thermal isolation between the 2K and 300K section is considerable by vacuum separation. Within this coupler, only a single propagation mode is allowed at each section, and thus, the fact that no energy is converted to high order mode bring almost full match without loss. The analytical and numerical calculation for a two window variable coupler is designed and optimized. A RF power variation is illustrated in the scattering matrix and coupling to cavity is also discussed.

physics.acc-ph

Novel X band Compact Waveguide Dual Circular Polarizer

A novel type of dual circular polarizer is developed to convert the TE10 mode into two different polarization TE11 modes in a circular waveguide. This design consists two major parts: a TE10 to TE10/TE20 converter and an overmoded TE10/TE20 to circular TE11 modes converter.

physics.acc-ph

Technology developments for a scalable heterodyne MMIC array at W-band

We report on the development of W-band (75-110 GHz) heterodyne receiver technology for large-format astronomical arrays. The receiver system is designed to be both mass-producible, so that the designs could be scaled to thousands of receiver elements, and modular. Most of the receiver function- ality is integrated into compact Monolithic Microwave Integrated Circuit (MMIC) amplifier-based multichip modules. The MMIC modules include a chain of InP MMIC low-noise amplifiers, coupled-line bandpass filters and sub-harmonic Schottky diode mixers. The receiver signals will be routed to and from the MMIC modules on a multilayer high frequency laminate, which includes splitters, amplifiers, and frequency doublers. A prototype MMIC module has exhibited a band-averaged noise temperature of 41 K from 82-100 GHz and a gain of 29 dB at 15 K, which is the state- of-the-art for heterodyne multi-chip modules.

astro-ph.IM

Measurements of the Suitability of Large Rock Salt Formations for Radio Detection of High Energy Neutrinos

We have investigated the possibility that large rock salt formations might be suitable as target masses for detection of neutrinos of energies about 10 PeV and above. In neutrino interactions at these energies, the secondary electromagnetic cascade produces a coherent radio pulse well above ambient thermal noise via the Askaryan effect. We describe measurements of radio-frequency attenuation lengths and ambient thermal noise in two salt formations. Measurements in the Waste Isolation Pilot Plant (WIPP), located in an evaporite salt bed in Carlsbad, NM yielded short attenuation lengths, 3-7 m over 150-300 MHz. However, measurements at United Salt's Hockley mine, located in a salt dome near Houston, Texas yielded attenuation lengths in excess of 250 m at similar frequencies. We have also analyzed early ground-penetrating radar data at Hockley mine and have found additional evidence for attenuation lengths in excess of several hundred meters at 440 MHz. We conclude that salt domes, which may individually contain several hundred cubic kilometer water-equivalent mass, provide attractive sites for next-generation high-energy neutrino detectors.

hep-ex