arXiv subjects

Samira Rahimian

Publications and source records attributed to Samira Rahimian.

4 recordsLinked to original sources

arXiv2020

Performance Analysis and Optimization of 3D Massive MIMO Multi-Pair Relaying with SWIPT

In this paper, we study a massive multiple-input multiple-output (mMIMO) relay network where multiple source-destination pairs exchange information through a common relay equipped with a massive antenna array. The source users perform simultaneous wireless information and power transfer (SWIPT) and the power-splitting (PS) scheme is used at the relay to first harvest energy from the received signals, and then, to transmit the decoded signals using the harvested energy. Relay performs maximum ratio combining/maximum ratio transmission (MRC/MRT) beam-forming on the received signal. Under the three-dimensional (3D) directional channel model, we derive a closed-form lower bound expression for the average signal-to-interference-plus-noise ratio using results from random matrix theory, which leads to an asymptotic approximation of the achievable sum-rate. Based on that, we study a joint optimization problem over the tilt and PS ratio to maximize the achievable sum-rate. Grid search algorithm is used to solve the non-convex problem. Simulation results verify our theoretical analysis and the efficiency of our optimized design. In particular, our optimized system outperforms a conventional system with $π/4$ tilt and PS of $0.5$, by at least $61\%$.

eess.SP↗

arXiv2019

Performance Analysis of Massive MIMO Multi-Way Relay Networks with Low-Resolution ADCs

High power consumption and hardware cost are two barriers for practical massive multiple-input multiple-output (mMIMO) systems. A promising solution is to employ low-resolution analog-to-digital converters (ADCs). In this paper, we consider a general mMIMO multi-way relaying system with a multi-level mixed-ADC architecture, in which each antenna is connected to an ADC pair of an arbitrary resolution. By leveraging on Bussgang's decomposition theorem and Lloyd-Max algorithm for quantization, tight closed-form approximations are derived for the average achievable rates of zero-forcing (ZF) relaying considering both perfect and imperfect channel state information (CSI). To conquer the challenges caused by multi-way relaying, the complicated ZF beam-forming matrix, and the general mixed-ADC structure, we develop a novel method for the achievable rate analysis using the singular-value decomposition (SVD) for Gaussian matrices, distributions of the singular values of Gaussian matrices, and properties of Haar matrices. The results explicitly show the achievable rate behavior in terms of the user and relay transmit powers and the numbers of relay antennas and users. Most importantly, it quantifies the performance degradation caused by low-resolution ADCs and channel estimation error. We demonstrate that the average achievable rate has an almost linear relation with the square of the average of quantization coefficients pertaining to the ADC resolution profile.

eess.SP↗

arXiv2018

Partial Zero-Forcing for Multi-Way Relay Networks

The ever increasing demands for mobile network access have resulted in a significant increase in bandwidth usage. By improving the system spectral efficiency, multi-way relay networks (MWRNs) provide promising approaches to address this challenge. In this paper, we propose a novel linear beamforming design, namely partial zero-forcing (PZF), for MWRNs with a multiple-input-multiple-output (MIMO) relay. Compared to zero-forcing (ZF), PZF relaxes the constraints on the relay beamforming matrix such that only partial user-interference, instead of all, is canceled at the relay. The users eliminate the remaining interferences through self-interference and successive interference cancellation. A sum-rate maximization problem is formulated and solved to exploit the extra degrees-of-freedom resulted from PZF. Simulation results show that the proposed PZF relay beamforming design achieves significantly higher network sum-rates than the existing linear beamforming designs.

eess.SP↗

arXiv2016

On the Capacity Region of ALOHA Protocol for the Internet of Things

Accommodating the needs of a large number of diverse users in the Internet of Things (IoT), notably managing how the users access the common channel, has posed unique challenges to the network designers. In this paper, we study a heterogeneous IoT network consisting of multiple classes of users who may have different service requirements. For this network, we consider the application of irregular repetition slotted ALOHA (IRSA) that is shown to offer large throughput for single-class networks. Then, we focus on finding the network performance boundaries by studying the set of feasible throughput values for each class, called the capacity region. To this end, we first introduce the concept of dual network of a multi-class network meaning a homogeneous network with the same number of users. We then prove that finding the capacity region of the assumed multi-class network boils down to finding the maximum achievable throughput of its dual network. Using this finding, we then discuss how any given point of the capacity region can be achieved. Further, a delay performance study is conducted to evaluate the average and maximum packet transmission delay experienced by the users of each class.

cs.NI↗