Searcharxiv⌕ Search

arXiv subjects

Samuel Labi

Publications and source records attributed to Samuel Labi.

23 records · Page 2Linked to original sources

A DRL-based Multiagent Cooperative Control Framework for CAV Networks: a Graphic Convolution Q Network

Connected Autonomous Vehicle (CAV) Network can be defined as a collection of CAVs operating at different locations on a multilane corridor, which provides a platform to facilitate the dissemination of operational information as well as control instructions. Cooperation is crucial in CAV operating systems since it can greatly enhance operation in terms of safety and mobility, and high-level cooperation between CAVs can be expected by jointly plan and control within CAV network. However, due to the highly dynamic and combinatory nature such as dynamic number of agents (CAVs) and exponentially growing joint action space in a multiagent driving task, achieving cooperative control is NP hard and cannot be governed by any simple rule-based methods. In addition, existing literature contains abundant information on autonomous driving's sensing technology and control logic but relatively little guidance on how to fuse the information acquired from collaborative sensing and build decision processor on top of fused information. In this paper, a novel Deep Reinforcement Learning (DRL) based approach combining Graphic Convolution Neural Network (GCN) and Deep Q Network (DQN), namely Graphic Convolution Q network (GCQ) is proposed as the information fusion module and decision processor. The proposed model can aggregate the information acquired from collaborative sensing and output safe and cooperative lane changing decisions for multiple CAVs so that individual intention can be satisfied even under a highly dynamic and partially observed mixed traffic. The proposed algorithm can be deployed on centralized control infrastructures such as road-side units (RSU) or cloud platforms to improve the CAV operation.

cs.AI↗

A Cooperative Control Framework for CAV Lane Change in a Mixed Traffic Environment

In preparing for connected and autonomous vehicles (CAVs), a worrisome aspect is the transition era which will be characterized by mixed traffic (where CAVs and human-driven vehicles (HDVs) share the roadway). Consistent with expectations that CAVs will improve road safety, on-road CAVs may adopt rather conservative control policies, and this will likely cause HDVs to unduly exploit CAV conservativeness by driving in ways that imperil safety. A context of this situation is lane-changing by the CAV. Without cooperation from other vehicles in the traffic stream, it can be extremely unsafe for the CAV to change lanes under dense, high-speed traffic conditions. The cooperation of neighboring vehicles is indispensable. To address this issue, this paper develops a control framework where connected HDVs and CAV can cooperate to facilitate safe and efficient lane changing by the CAV. Throughout the lane-change process, the safety of not only the CAV but also of all neighboring vehicles, is ensured through a collision avoidance mechanism in the control framework. The overall traffic flow efficiency is analyzed in terms of the ambient level of CHDV-CAV cooperation. The analysis outcomes are including the CAVs lane-change feasibility, the overall duration of the lane change. Lane change is a major source of traffic disturbance at multi-lane highways that impair their traffic flow efficiency. In providing a control framework for lane change in mixed traffic, this study shows how CHDV-CAV cooperation could help enhancing system efficiency.

eess.SY↗

Using Empirical Trajectory Data to Design Connected Autonomous Vehicle Controllers for Traffic Stabilization

Emerging transportation technologies offer unprecedented opportunities to improve the efficiency of the transportation system from the perspectives of energy consumption, congestion, and emissions. One of these technologies is connected and autonomous vehicles (CAVs). With the prospective duality of operations of CAVs and human driven vehicles in the same roadway space (also referred to as a mixed stream), CAVs are expected to address a variety of traffic problems particularly those that are either caused or exacerbated by the heterogeneous nature of human driving. In efforts to realize such specific benefits of CAVs in mixed-stream traffic, it is essential to understand and simulate the behavior of human drivers in such environments, and microscopic traffic flow (MTF) models can be used to carry out this task. By helping to comprehend the fundamental dynamics of traffic flow, MTF models serve as a powerful approach to assess the impacts of such flow in terms of safety, stability, and efficiency. In this paper, we seek to calibrate MTF models based on empirical trajectory data as basis of not only understanding traffic dynamics such as traffic instabilities, but ultimately using CAVs to mitigate stop-and-go wave propagation. The paper therefore duly considers the heterogeneity and uncertainty associated with human driving behavior in order to calibrate the dynamics of each HDV. Also, the paper designs the CAV controllers based on the microscopic HDV models that are calibrated in real time. The data for the calibration is from the Next Generation SIMulation (NGSIM) trajectory datasets. The results are encouraging, as they indicate the efficacy of the designed controller to significantly improve not only the stability of the mixed traffic stream but also the safety of both CAVs and HDVs in the traffic stream.

eess.SY↗

Facilitating Connected Autonomous Vehicle Operations Using Space-weighted Information Fusion and Deep Reinforcement Learning Based Control

The connectivity aspect of connected autonomous vehicles (CAV) is beneficial because it facilitates dissemination of traffic-related information to vehicles through Vehicle-to-External (V2X) communication. Onboard sensing equipment including LiDAR and camera can reasonably characterize the traffic environment in the immediate locality of the CAV. However, their performance is limited by their sensor range (SR). On the other hand, longer-range information is helpful for characterizing imminent conditions downstream. By contemporaneously coalescing the short- and long-range information, the CAV can construct comprehensively its surrounding environment and thereby facilitate informed, safe, and effective movement planning in the short-term (local decisions including lane change) and long-term (route choice). In this paper, we describe a Deep Reinforcement Learning based approach that integrates the data collected through sensing and connectivity capabilities from other vehicles located in the proximity of the CAV and from those located further downstream, and we use the fused data to guide lane changing, a specific context of CAV operations. In addition, recognizing the importance of the connectivity range (CR) to the performance of not only the algorithm but also of the vehicle in the actual driving environment, the paper carried out a case study. The case study demonstrates the application of the proposed algorithm and duly identifies the appropriate CR for each level of prevailing traffic density. It is expected that implementation of the algorithm in CAVs can enhance the safety and mobility associated with CAV driving operations. From a general perspective, its implementation can provide guidance to connectivity equipment manufacturers and CAV operators, regarding the default CR settings for CAVs or the recommended CR setting in a given traffic environment.

cs.AI↗

Leveraging Vehicle Connectivity and Autonomy to Stabilize Flow in Mixed Traffic Conditions: Accounting for Human-driven Vehicle Driver Behavioral Heterogeneity and Perception-reaction Time Delay

The erratic nature of human driving tends to trigger undesired waves that amplify as successive driver reactions propagate from the errant vehicle to vehicles upstream. Known as phantom jams, this phenomenon has been identified in the literature as one of the main causes of traffic congestion. This paper is based on the premise that vehicle automation and connectivity can help mitigate such jams. In the paper, we design a controller for use in a connected and autonomous vehicle (CAV) to stabilize the flow of human-driven vehicles (HDVs) that are upstream of the CAV, and consequently to lower collision risk in the upstream traffic environment. In modeling the HDV dynamics in the mixed traffic stream, we duly consider HDV driver heterogeneity and the time delays associated with their perception reaction time. We can find that the maximum number of HDVs that a CAV can stabilize is lower when human drivers potential time delay and heterogeneity are considered, compared to the scenario where such are not considered. This result suggests that heterogeneity and time delay in HDV behavior impairs the CAVs capability to stabilize traffic. Therefore, in designing CAV controllers for traffic stabilization, it is essential to consider such uncertainty-related conditions. In our demonstration, we also show that the designed controller can significantly improve both the stability of the mixed traffic stream and the safety of both CAVs and HDVs in the stream. The results are useful for real-time calibration of the model parameters that characterize HDV movements in the mixed stream.

eess.SY↗