arXiv subjects

Santi Prestipino

Publications and source records attributed to Santi Prestipino.

36 records · Page 2Linked to original sources

arXiv2018

Universal behavior of soft-core fluids near the threshold of thermodynamic stability

We study, by using liquid-state theories and Monte Carlo simulation, the behavior of systems of classical particles interacting through a finite pair repulsion supplemented with a longer range attraction. Any such potential can be driven Ruelle-unstable by increasing the attraction at the expense of repulsion, until the thermodynamic limit is lost. By examining several potential forms, we find that all systems exhibit a qualitatively similar behavior in the fluid phase as the threshold of thermodynamic stability is approached (and possibly surpassed). The general feature underlying the approach to Ruelle instability is a pronounced widening of the liquid-vapor binodal (and spinodal) line at low temperatures, to such an extent that at the stability threshold a vanishing-density vapor would coexist with a diverging-density liquid. We attempt to rationalize the universal pathway to Ruelle instability in soft-core fluids by appealing to a heuristic argument.

cond-mat.soft↗

arXiv2017

Self-assembly in a model colloidal mixture of dimers and spherical particles

We investigate the structure of a dilute mixture of amphiphilic dimers and spherical particles, a model relevant to the problem of encapsulating globular "guest" molecules in a dispersion. Dimers and spheres are taken to be hard particles, with an additional attraction between spheres and the smaller monomers in a dimer. Using Monte Carlo simulation, we document the low-temperature formation of aggregates of guests (clusters) held together by dimers, whose typical size and shape depend on the guest concentration $χ$. For low $χ$ (less than $10\%$), most guests are isolated and coated with a layer of dimers. As $χ$ progressively increases, clusters grow in size becoming more and more elongated and polydisperse; after reaching a shallow maximum for $χ\approx 50\%$, the size of clusters again reduces upon increasing $χ$ further. In one case only ($χ=50\%$ and moderately low temperature) the mixture relaxed to a fluid of lamellae, suggesting that in this case clusters are metastable with respect to crystal-vapor separation. On heating, clusters shrink until eventually the system becomes homogeneous on all scales. On the other hand, as the mixture is made denser and denser at low temperature, clusters get increasingly larger until a percolating network is formed.

cond-mat.soft↗

arXiv2015

Phase behavior near and beyond the thermodynamic stability threshold

The phase behavior of stabilized dispersions of macromolecules is most easily described in terms of the effective interaction between the centers of mass of solute particles. For molecules like polymer chains, dendrimers, etc., the effective pair potential is {\em finite} at the origin, allowing "particles" to freely interpenetrate each other. Using a double-Gaussian model (DGM) for demonstration, we studied the behavior of the system as a function of the attraction strength $η$. Above a critical strength $η_{\rm c}$, the infinite-size system is Ruelle-unstable, in that it collapses to a cluster of finite volume. As $η_{\rm c}$ is approached from below, the liquid-vapor region exhibits an anomalous widening at low temperature, and the liquid density apparently diverges at the stability threshold. Above $η_{\rm c}$, the thermodynamic plane is divided in two regions, differing in the value of the {\em average} waiting time for collapse, being finite and small on one side of the boundary line, while large or even infinite in the other region. Upon adding a small hard core to the DGM potential, stability is fully recovered and the boundary line is converted to the spinodal line of a transition between fluid phases. We argue that the destabilization of a colloidal dispersion, as induced by the addition of salt or other flocculant, finds a suggestive analogy in the process by which a strengthening of the attraction pushes a stabilized-DGM system inside the fluid-fluid spinodal region.

cond-mat.soft↗

arXiv2014

Hexatic phase and cluster crystals of two-dimensional GEM4 spheres

Two-dimensional crystals of classical particles are very peculiar in that melting may occur in two steps, in a continuous fashion, via an intermediate hexatic fluid phase exhibiting quasi-long-range orientational order. On the other hand, three-dimensional spheres repelling each other through a fast-decaying bounded potential of generalized-exponential shape (GEM4 potential) can undergo freezing into cluster crystals, allowing for more that one particle per lattice site. We hereby study the combined effect of low spatial dimensionality and extreme potential softness, by investigating the phase behavior of the two-dimensional (2D) GEM4 system. Using a combination of density-functional theory and numerical free-energy calculations, we show that the 2D GEM4 system displays one ordinary and several cluster triangular-crystal phases, and that only the ordinary crystal first melts into a hexatic phase. Upon heating, the difference between the various cluster crystals fades away, eventually leaving a single undifferentiated cluster phase with a pressure-modulated site occupancy.

cond-mat.soft↗

arXiv2014

Shape and area fluctuation effects on nucleation theory

In standard nucleation theory, the nucleation process is characterized by computing $ΔΩ(V)$, the reversible work required to form a cluster of volume $V$ of the stable phase inside the metastable mother phase. However, other quantities besides the volume could play a role in the free energy of cluster formation, and this will in turn affect the nucleation barrier and the shape of the nucleus. Here we exploit our recently introduced mesoscopic theory of nucleation to compute the free energy cost of a nearly-spherical cluster of volume $V$ and a fluctuating surface area $A$, whereby the maximum of $ΔΩ(V)$ is replaced by a saddle point in $ΔΩ(V,A)$. Compared to the simpler theory based on volume only, the barrier height of $ΔΩ(V,A)$ at the transition state is systematically larger by a few $k_BT$. More importantly, we show that, depending on the physical situation, the most probable shape of the nucleus may be highly non spherical, even when the surface tension and stiffness of the model are isotropic. Interestingly, these shape fluctuations do not influence or modify the standard Classical Nucleation Theory manner of extracting the interface tension from the logarithm of the nucleation rate near coexistence.

cond-mat.stat-mech↗

arXiv2013

A maximum-entropy approach to the adiabatic freezing of a supercooled liquid

I employ the van der Waals theory of Baus and coworkers to analyze the fast, adiabatic decay of a supercooled liquid in a closed vessel with which the solidification process usually starts. By imposing a further constraint on either the system volume or pressure, I use the maximum-entropy method to quantify the fraction of liquid that is transformed into solid as a function of undercooling and of the amount of a foreign gas that could possibly be also present in the test tube. Upon looking at the implications of thermal and mechanical insulation for the energy cost of forming a solid droplet within the liquid, I identify one situation where the onset of solidification inevitably occurs near the wall in contact with the bath.

cond-mat.stat-mech↗

arXiv2013

A fingerprint of surface-tension anisotropy in the free-energy cost of nucleation

We focus on the Gibbs free energy $ΔG$ for nucleating a droplet of the stable phase (e.g. solid) inside the metastable parent phase (e.g. liquid), close to the first-order transition temperature. This quantity is central to the theory of homogeneous nucleation, since it superintends the nucleation rate. We recently introduced a field theory describing the dependence of $ΔG$ on the droplet volume $V$, taking into account besides the microscopic fuzziness of the droplet-parent interface, also small fluctuations around the spherical shape whose effect, assuming isotropy, was found to be a characteristic logarithmic term. Here we extend this theory, introducing the effect of anisotropy in the surface tension, and show that in the limit of strong anisotropy $ΔG(V)$ once more develops a term logarithmic on $V$, now with a prefactor of opposite sign with respect to the isotropic case. Based on this result, we argue that the geometrical shape that large solid nuclei mostly prefer could be inferred from the prefactor of the logarithmic term in the droplet free energy, as determined from the optimization of its near-coexistence profile.

cond-mat.stat-mech↗

arXiv2012

Hexatic phase and water-like anomalies in a two-dimensional fluid of particles with a weakly softened core

We study a two-dimensional fluid of particles interacting through a spherically-symmetric and marginally soft two-body repulsion. This model can exist in three different crystal phases, one of them with square symmetry and the other two triangular. We show that, while the triangular solids first melt into a hexatic fluid, the square solid is directly transformed on heating into an isotropic fluid through a first-order transition, with no intermediate tetratic phase. In the low-pressure triangular and square crystals melting is reentrant provided the temperature is not too low, but without the necessity of two competing nearest-neighbor distances over a range of pressures. A whole spectrum of water-like fluid anomalies completes the picture for this model potential.

cond-mat.soft↗

arXiv2012

Systematic Improvement of Classical Nucleation Theory

We reconsider the applicability of classical nucleation theory (CNT) to the calculation of the free energy of solid cluster formation in a liquid and its use to the evaluation of interface free energies from nucleation barriers. Using two different freezing transitions (hard spheres and NaCl) as test cases, we first observe that the interface-free-energy estimates based on CNT are generally in error. As successive refinements of nucleation-barrier theory, we consider corrections due to a non-sharp solid-liquid interface and to a non-spherical cluster shape. Extensive calculations for the Ising model show that corrections due to a non-sharp and thermally fluctuating interface account for the barrier shape with excellent accuracy. The experimental solid nucleation rates that are measured in colloids are better accounted for by these non-CNT terms, whose effect appears to be crucial in the interpretation of data and in the extraction of the interface tension from them.

cond-mat.stat-mech↗

arXiv2012

On the accuracy of the melting curves drawn from modelling a solid as an elastic medium

An ongoing problem in the study of a classical many-body system is the characterization of its equilibrium behaviour by theory or numerical simulation. For purely repulsive particles, locating the melting line in the pressure-temperature plane can be especially hard if the interparticle potential has a softened core or contains some adjustable parameters. A method is hereby presented that yields reliable melting-curve topologies with negligible computational effort. It is obtained by combining the Lindemann melting criterion with a description of the solid phase as an elastic continuum. A number of examples are given in order to illustrate the scope of the method and possible shortcomings. For a two-body repulsion of Gaussian shape, the outcome of the present approach compares favourably with the more accurate but also more computationally demanding self-consistent harmonic approximation.

cond-mat.stat-mech↗

arXiv2012

Thermodynamic and structural anomalies of the Gaussian-core model in one dimension

We investigated the equilibrium properties of a one-dimensional system of classical particles which interact in pairs through a bounded repulsive potential with a Gaussian shape. Notwithstanding the absence of a proper fluid-solid phase transition, we found that the system exhibits a complex behaviour, with "anomalies" in the density and in the thermodynamic response functions which closely recall those observed in bulk and confined liquid water. We also discuss the emergence in the cold fluid under compression of an unusual structural regime, characterized by density correlations reminiscent of the ordered arrangements found in clustered crystals.

cond-mat.soft↗

arXiv2010

Anomalous phase behavior in a model fluid with only one type of local structure

We present evidence that the concurrent existence of two populations of particles with different effective diameters is not a prerequisite for the occurrence of anomalous phase behaviors in systems of particles interacting through spherically-symmetric unbounded potentials. Our results show that an extremely weak softening of the interparticle repulsion, yielding a single nearest-neighbor separation, is able to originate a wide spectrum of unconventional features including reentrant melting, solid polymorphism, as well as thermodynamic, dynamic, and structural anomalies. These findings extend the possibility of anomalous phase behavior to a class of systems much broader than currently assumed.

cond-mat.soft↗

arXiv2009

Anomalous phase behavior of a soft-repulsive potential with a strictly monotonic force

We study the phase behavior of a classical system of particles interacting through a strictly convex soft-repulsive potential which, at variance with the pairwise softened repulsions considered so far in the literature, lacks a region of downward or zero curvature. Nonetheless, such interaction is characterized by two length scales, owing to the presence of a range of interparticle distances where the repulsive force increases, for decreasing distance, much more slowly than in the adjacent regions. We investigate, using extensive Monte Carlo simulations combined with accurate free-energy calculations, the phase diagram of the system under consideration. We find that the model exhibits a fluid-solid coexistence line with multiple re-entrant regions, an extremely rich solid polymorphism with solid-solid transitions, and water-like anomalies. In spite of the isotropic nature of the interparticle potential, we find that, among the crystal structures in which the system can exist, there are also a number of non-Bravais lattices, such as cI16 and diamond.

cond-mat.soft↗

arXiv2009

Reentrant melting of the exp-6 fluid: the role of the repulsion softness

We investigate the phase behaviour of a system of particles interacting through the exp-6 pair potential, a model interaction that is appropriate to describe effective interatomic forces under high compression. The soft-repulsive component of the potential is being varied so as to study the effect on reentrant melting and density anomaly. Upon increasing the repulsion softness, we find that the anomalous melting features persist and occur at smaller pressures. Moreover, if we reduce the range of downward concavity in the potential by extending the hard core at the expenses of the soft-repulsive shoulder, the reentrant part of the melting line reduces in extent so as it does the region of density anomaly.

cond-mat.soft↗

arXiv2009

The zero-temperature phase diagram of soft-repulsive particle fluids

Effective pair interactions with a soft-repulsive component are a well-known feature of polymer solutions and colloidal suspensions, but they also provide a key to interpret the high-pressure behaviour of simple elements. We have computed the zero-temperature phase diagram of four different model potentials with various degrees of core softness. Among the reviewed crystal structures, there are also a number of non-Bravais lattices, chosen among those observed in real systems. Some of these crystals are indeed found to be stable for the selected potentials. We recognize an apparently universal trend for unbounded potentials, going from high- to low-coordinated crystal phases and back upon increasing the pressure. Conversely, a bounded repulsion may lead to intermittent appearance of compact structures with compression and no eventual settling down in a specific phase. In both cases, the fluid phase repeatedly reenters at intermediate pressures, as suggested by a cell-theory treatment of the solids. These findings are of relevance for soft matter in general, but they also offer fresh insight into the mechanisms subtended to solid polymorphism in elemental substances.

cond-mat.soft↗

arXiv2007

Phase diagram of Gaussian-core nematics

We study a simple model of a nematic liquid crystal made of parallel ellipsoidal particles interacting via a repulsive Gaussian law. After identifying the relevant solid phases of the system through a careful zero-temperature scrutiny of as many as eleven candidate crystal structures, we determine the melting temperature for various pressure values, also with the help of exact free energy calculations. Among the prominent features of this model are pressure-driven reentrant melting and the stabilization of a columnar phase for intermediate temperatures.

cond-mat.soft↗

arXiv2006

Evaluation of phenomenological one-phase criteria for the melting and freezing of softly repulsive particles

We test the validity of some widely used phenomenological criteria for the localization of the fluid-solid transition thresholds against the phase diagrams of particles interacting through the exp-6, inverse-power-law, and Gaussian potentials. We find that one-phase rules give, on the whole, reliable estimates of freezing/melting points. The agreement is ordinarily better for a face-centered-cubic solid than for a body-centered-cubic crystal, even more so in the presence of a pressure-driven re-entrant transition of the solid into a denser fluid phase, as found in the Gaussian-core model.

cond-mat.soft↗

arXiv2005

High-pressure phase diagram of the exp-6 model: The case of Xenon

We investigated numerically the high-temperature/high-pressure phase diagram of Xenon as modelled through the exp-6 interaction potential, which is thought to provide a reliable description of the thermal behaviour of rare gases under extreme conditions. We performed a series of extensive NVT Monte Carlo simulations which, in conjunction with exact computation of the solid free energy by the Frenkel-Ladd method, allowed us to precisely locate the freezing and the melting thresholds at each temperature. We find that, under isothermal compression, the exp-6 fluid freezes directly into a FCC solid; however, above 4500 K, an intermediate BCC phase becomes stable in a narrow range of pressures. The chemical potential of the HCP phase does never significantly differ from that of the FCC solid of equal T and P, though the former is found to slightly overcome the latter. We discuss our results in the light of previous numerical studies of the same model system and of the experimental data available for Xenon.

cond-mat.mtrl-sci↗