Searcharxiv⌕ Search

arXiv subjects

Sasan Razmkhah

Publications and source records attributed to Sasan Razmkhah.

25 records · Page 2Linked to original sources

Unsupervised SFQ-Based Spiking Neural Network

Single Flux Quantum (SFQ) technology represents a groundbreaking advancement in computational efficiency and ultra-high-speed neuromorphic processing. The key features of SFQ technology, particularly data representation, transmission, and processing through SFQ pulses, closely mirror fundamental aspects of biological neural structures. Consequently, SFQ-based circuits emerge as an ideal candidate for realizing Spiking Neural Networks (SNNs). This study presents a proof-of-concept demonstration of an SFQ-based SNN architecture, showcasing its capacity for ultra-fast switching at remarkably low energy consumption per output activity. Notably, our work introduces innovative approaches: (i) We introduce a novel spike-timing-dependent plasticity mechanism to update synapses and to trace spike-activity by incorporating a leaky non-destructive readout circuit. (ii) We propose a novel method to dynamically regulate the threshold behavior of leaky integrate and fire superconductor neurons, enhancing the adaptability of our SNN architecture. (iii) Our research incorporates a novel winner-take-all mechanism, aligning with practical strategies for SNN development and enabling effective decision-making processes. The effectiveness of these proposed structural enhancements is evaluated by integrating high-level models into the BindsNET framework. By leveraging BindsNET, we model the online training of an SNN, integrating the novel structures into the learning process. To ensure the robustness and functionality of our circuits, we employ JoSIM for circuit parameter extraction and functional verification through simulation.

cs.ET↗

Superconductor modulation circuits for Qubit control at microwave frequencies

Readout and control of qubits are limiting factors in scaling quantum computers. An ideal solution is to integrate energy-efficient cryogenic circuits close to the qubits to perform control and pre-processing tasks. With orders of magnitude lower power consumption and hence lower noise, Single Flux Quantum (SFQ) and Adiabatic Quantum Flux Parametron (AQFP) superconductor logic families can reach ultimate performance at cryogenic temperatures. We have created a superconductor-based on-chip function generator to control qubits. The generated signal is modulated up to tens of GHz based on the external input waveform applied to the superconductor mixer stage. This circuit works at 4.2K. A radiofrequency (RF) matching circuit transmits the signal to the ~mK stage after digital amplification and noise reduction.

quant-ph↗

High-Density Superconductive Logic Circuits Utilizing 0 and $π$ Josephson Junctions

Superconductor Electronics (SCE) is a fast and power-efficient technology with great potential for overcoming conventional CMOS electronics' scaling limits. Nevertheless, the primary challenge confronting SCE today pertains to its integration level, which lags several orders of magnitude behind CMOS circuits. In this study, we have innovated and simulated a novel logic family grounded in the principles of phase shifts occurring in 0 and $π$ Josephson junctions. The fast phase logic (FPL) eliminates the need for large inductor loops and shunt resistances by combining the half-flux and phase logic. Therefore, the Josephson junction (JJ) area only limits the integration density. The cells designed with this paradigm are fast, and the clock-to-Q delay is about 4ps while maintaining over 50% parameter margins. This logic is power efficient and can increase the integration by at least 100$\times$ in the SCE chips.

cond-mat.supr-con↗

A Compact High Frequency Voltage Amplifier for Superconductor-Semiconductor Logic Interface

The many advantages of cryogenically-cooled Single-Flux Quantum (SFQ) circuits imply that the high speed and low voltage output signals must be amplified and interfaced with standard electronics. State-of-the-art low-noise and wide-band amplifiers are required to interface with room temperature electronics. One solution is to place preamplifiers at the cryogenic stage, which requires specific semiconductor design and fabrication. However, a more viable and energy-efficient approach is to integrate the pulsed logic circuit output stages with on-chip superconductor preamplifiers. We designed, fabricated, and tested an on-chip compact voltage multiplier integrated with the output stage of SFQ circuits to increase the voltage amplitude of SFQ pulses. The circuit is designed with the same technology as the logic circuit hence its noise level is lower, and it works at higher frequencies compared to CMOS amplifiers and due to quantized nature of it there is no added noise. The fabricated circuit has a compact size of 160 um x 320um and provides about 10 dB gain with measured 600 uV output voltage at frequencies up to ~25 GHz in simulations. By stacking more levels, over 20 dB gain at circuit level is achievable as shown in simulations. Moreover the gain of the superconductor voltage amplifier is quantized and programmable.

physics.app-ph↗

Single Flux Quantum Based Ultrahigh Speed Spiking Neuromorphic Processor Architecture

Artificial neural networks inspired by brain operations can improve the possibilities of solving complex problems more efficiently. Today's computing hardware, on the other hand, is mainly based on von Neumann architecture and CMOS technology, which is inefficient at implementing neural networks. For the first time, we propose an ultrahigh speed, spiking neuromorphic processor architecture built upon single flux quantum (SFQ) based artificial neurons (JJ-Neuron). Proposed architecture has the potential to provide higher performance and power efficiency over the state of the art including CMOS, memristors and nanophotonics devices. JJ-Neuron has the ultrafast spiking capability, trainability with commodity design software even after fabrication and compatibility with commercial CMOS and SFQ foundry services. We experimentally demonstrate the soma part of the JJ-Neuron for various activation functions together with peripheral SFQ logic gates. Then, the neural network is trained for the IRIS dataset and we have shown 100% match with the results of the offline training with 1.2x${10}^{10}$ synaptic operations per second (SOPS) and 8.57x${10}^{11}$ SOPS/W performance and power efficiency, respectively. In addition, scalability for ${10}^{18}$ SOPS and ${10}^{17}$ SOPS/W is shown which is at least five orders of magnitude more efficient than the state of the art CMOS circuits and one order of magnitude more efficient than estimations of nanophotonics-based architectures.

cs.ET↗

Study of microwave resonances induced by bias lines of shunted Josephson junctions

Bias lines routed over a ground plane naturally form microstrip lines associated with the presence of a capacitance. This can lead to unwanted resonances when coupled to Josephson junctions. This work presents an electrical model of a shunted Josephson junction with its bias lines and pads, fabricated with the 1 kA/cm$^2$ RSFQ niobium process of the FLUXONICS Foundry. A compact LCL T-model is used to simulate the microwave behavior of the bias line, predict resonances and design resonance-free superconducting circuits. The I-V characteristics of three shunted Josephson junctions have been obtained from time-domain simulations done with JSIM and show a good match with the global behavior and experimentally observed resonance at 230 GHz, measured at 4.2 K. The influence of the position and value of a series resistor placed on bias lines is studied to damp unwanted resonances at the junction.

physics.app-ph↗

JOINUS: A User-friendly Open-source Software to Simulate Digital Superconductor Circuits

Single flux quantum (SFQ) based circuits are the subject of renewed attention due to their high speed and their very high energy efficiency. However, the need of cryogenic temperature, the complex physics of Josephson junctions and the lack of proper EDA tools causes slow progress in the field of superconducting electronics. In this work we introduce a new open source program named JOsephson INterface Utility Software (JOINUS [1]) that incorporates SPICE-based simulator engines, improved physical models and several powerful built-in routines. JOINUS is based on a user-friendly environment available on Linux, MacOS and Windows platforms to simplify the design and analysis of superconducting digital circuits.

cond-mat.supr-con↗