arXiv subjects

Sasawat Jamnuch

Publications and source records attributed to Sasawat Jamnuch.

7 recordsLinked to original sources

arXiv2026

Characterization of Silicon-Membrane TES Microcalorimeters for Large-Format X-ray Spectrometers with Integrated Microwave SQUID Readout

We present the electro-thermal characterization of transition-edge sensor (TES) detectors suspended on Si membranes fabricated using a silicon-on-insulator (SOI) wafer. The use of an all-silicon fabrication platform, in contrast to the more commonly used silicon nitride membranes, is compatible with monolithic fabrication of integrated TES and SQUID circuits. The all-silicon architecture additionally allows efficient use of focal plane area; the readout circuitry may be positioned out of the focal plane by bending a thinned portion of the chip. Compatibility with integrated fabrication and efficient use of focal plane area provide a path to an efficient soft X-ray spectrometer. This work is motivated by our goal to develop a 10,000-pixel TES spectrometer to overcome critical measurement limitations in catalysis research. The characterization of fragile, carbon-based intermediates via techniques like Resonant Inelastic X-ray Scattering (RIXS) is often precluded by the slow, high-flux nature of existing technologies. The new instrument will allow for fast RIXS measurements to be made without causing sample damage. We verify the detector models and measure the energy resolution using a pulsed optical laser, demonstrating the viability of this approach for the final instrument to be deployed at the National Synchrotron Light Source II (NSLS-II).

physics.ins-det↗

arXiv2023

Molecular-Scale Visualization of Steric Effects of Ligand Binding to Reconstructed Au(111) Surfaces

Direct imaging of single molecules at nanostructured interfaces is a grand challenge, with potential to enable new, precise material architectures and technologies. Of particular interest are the structural morphology and spectroscopic signatures of the adsorbed molecule, where modern probes are only now being developed with the necessary spatial and energetic resolution to provide detailed information at molecule-surface interface. Here, we directly visualize the binding of individual m-terphenyl isocyanide ligands to a reconstructed Au(111) surface through scanning tunneling microscopy (STM) and inelastic electron tunneling spectroscopy (IETS). The site-dependent steric pressure of the various surface features alters the vibrational fingerprints of the m-terphenyl isocyanides, which is characterized with single-molecule precision through joint experimental and theoretical approaches. This study for the first time provides molecular-level insights into the steric-pressure-enabled surface binding selectivity, as well as its effect on the chemical properties of individual surface-binding ligands.

cond-mat.mes-hall↗

arXiv2023

Agglomeration Drives the Reversed Fractionation of Aqueous Carbonate and Bicarbonate at the Air-water Interface

In the course of our investigations of the adsorption of ions to the air-water interface, we previously reported the surprising result that doubly-charged carbonate anions exhibit a stronger surface affinity than do singly-charged bicarbonate anions. In contrast to monovalent, weakly hydrated anions, which generally show enhanced concentrations in the interfacial region, multivalent (and strongly hydrated) anions are expected to show much weaker surface propensity. In the present work, we use resonantly enhanced deep-UV second harmonic generation spectroscopy to measure the Gibbs free energy of adsorption of both carbonate ($CO_3^{2-}$) and bicarbonate $(HCO_3^-)$ anions to the air-water interface. Contrasting the predictions of classical electrostatic theory, and in support of our previous findings from X-ray photoelectron spectroscopy, we find that carbonate anions do indeed exhibit much stronger surface affinity than do the bicarbonate anions. Molecular dynamics simulation reveals that strong ion pairing of $CO_3^{2-}$ with the $Na^+$ counter-cation in the interfacial region, resulting in formation of near-neutral agglomerates of $Na^+$ and $CO_3^{2-}$ clusters, is responsible for this counterintuitive behavior. These findings not only advance our fundamental understanding of ion adsorption chemistry, but will also impact important practical processes such as ocean acidification, sea-spray aerosol chemistry, and mammalian respiration physiology.

physics.chem-ph↗

arXiv2022

Saturable absorption of free-electron laser radiation by graphite near the carbon K-edge

The interaction of intense light with matter gives rise to competing nonlinear responses that can dynamically change material properties. Prominent examples are saturable absorption (SA) and two-photon absorption (TPA), which dynamically increase and decrease the transmission of a sample depending on pulse intensity, respectively. The availability of intense soft X-ray pulses from free-electron lasers (FEL) has led to observations of SA and TPA in separate experiments, leaving open questions about the possible interplay between and relative strength of the two phenomena. Here, we systematically study both phenomena in one experiment by exposing graphite films to soft X-ray FEL pulses of varying intensity, with the FEL energy tuned to match carbon 1s to $π^*$ or 1s to $σ^*$ transitions. It is observed for lower intensities that the nonlinear contribution to the absorption is dominated by SA attributed to ground-state depletion; for larger intensities ($>10^{14}$ W/cm$^2$), TPA becomes more dominant. The relative strengths of the two phenomena depend in turn on the specific transition driven by the X-ray pulse. Both observations are consistent with our real-time electronic structure calculations. Our results reveal the competing contributions of distinct nonlinear material responses to spectroscopic signals measured in the X-ray regime, demonstrating an approach of general utility for interpreting FEL spectroscopies.

physics.optics↗

arXiv2021

Polarization-Resolved Extreme Ultraviolet Second Harmonic Generation from LiNbO$_3$

Second harmonic generation (SHG) spectroscopy ubiquitously enables the investigation of surface chemistry, interfacial chemistry as well as symmetry properties in solids. Polarization-resolved SHG spectroscopy in the visible to infrared regime is regularly used to investigate electronic and magnetic orders through their angular anisotropies within the crystal structure. However, the increasing complexity of novel materials and emerging phenomena hamper the interpretation of experiments solely based on the investigation of hybridized valence states. Here, polarization-resolved SHG in the extreme ultraviolet (XUV-SHG) is demonstrated for the first time, enabling element-resolved angular anisotropy investigations. In non-centrosymmetric LiNbO$_3$, elemental contributions by lithium and niobium are clearly distinguished by energy dependent XUV-SHG measurements. This element-resolved and symmetry-sensitive experiment suggests that the displacement of Li ions in LiNbO$_3$, which is known to lead to ferroelectricity, is accompanied by distortions to the Nb ion environment that breaks the inversion symmetry of the NbO$_{6}$ octahedron as well. Our simulations show that the measured second harmonic spectrum is consistent with Li ion displacements from the centrosymmetric position by $\sim$0.5 Angstrom while the Nb-O bonds are elongated/contracted by displacements of the O atoms by $\sim$0.1 Angstrom. In addition, the polarization-resolved measurement of XUV-SHG shows excellent agreement with numerical predictions based on dipole-induced SHG commonly used in the optical wavelengths. This constitutes the first verification of the dipole-based SHG model in the XUV regime. The findings of this work pave the way for future angle and time-resolved XUV-SHG studies with elemental specificity in condensed matter systems.

cond-mat.mtrl-sci↗

arXiv2020

Direct observation of symmetry-breaking in a 'ferroelectric' polar metal

Ferroelectric materials contain a switchable spontaneous polarization that persists even in the absence of an external electric field. The coexistence of ferroelectricity and metallicity in a material appears to be illusive, since polarization is ill-defined in metals, where the itinerant electrons are expected to screen the long-range dipole interactions necessary for dipole ordering. The surprising discovery of the polar metal, LiOsO3 has generated interest in searching for new polar metals motivated by the prospects of exotic quantum phenomena such as unconventional pairing mechanisms giving rise to superconductivity, topological spin currents, anisotropic upper critical fields, and Mott multiferroics. Previous studies have suggested that the coordination preferences of the Li atom play a key role in stabilizing the polar metal phase of LiOsO3, but a thorough understanding of how polar order and metallicity can coexist remains elusive. Here, we use XUV-SHG as novel technique to directly probe the broken inversion-symmetry around the Li atom. Our results agree with previous theories that the primary structural distortion that gives rise to the polar metal phase in LiOsO3 is a consequence of a sub-Angstrom Li atom displacement along the polar axis. A remarkable agreement between our experimental results and ab initio calculations provide physical insights for connecting the nonlinear response to unit-cell spatial asymmetries. It is shown that XUV-SHG can selectively probe inversion-breaking symmetry in a bulk material with elemental specificity. Compared to optical SHG methods, XUV-SHG fills a key gap for studying structural asymmetries when the structural distortion is energetically separated from the Fermi surface. Further, these results pave the way for time-resolved probing of symmetry-breaking structural phase transitions on femtosecond timescales with element specificity.

cond-mat.mtrl-sci↗

arXiv2020

Ångström-resolved Interfacial Structure in Organic-Inorganic Junctions

Charge transport processes at interfaces which are governed by complex interfacial electronic structure play a crucial role in catalytic reactions, energy storage, photovoltaics, and many biological processes. Here, the first soft X-ray second harmonic generation (SXR-SHG) interfacial spectrum of a buried interface (boron/Parylene-N) is reported. SXR-SHG shows distinct spectral features that are not observed in X-ray absorption spectra, demonstrating its extraordinary interfacial sensitivity. Comparison to electronic structure calculations indicates a boron-organic separation distance of 1.9 Å, wherein changes as small as 0.1 Å result in easily detectable SXR-SHG spectral shifts (ca. 100s of meV). As SXR-SHG is inherently ultrafast and sensitive to individual atomic layers, it creates the possibility to study a variety of interfacial processes, e.g. catalysis, with ultrafast time resolution and bond specificity.

cond-mat.mtrl-sci↗